Powering ODROID X2 without barrel jack

Post Reply
Posts: 1
Joined: Thu Apr 18, 2019 4:40 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0

Powering ODROID X2 without barrel jack

Unread post by Derrick832 » Thu Apr 18, 2019 4:42 pm

I am unable to power my ODROID X2. I don't have the barrel jack for it, and it does not support MicroUSB power.

Is there a way to power the ODROID via the GPIO? If possible, could you point me to a reference for the I/O?

I don't want to solder onto the fragile board and I am almost out of time!

User avatar
Site Admin
Posts: 32146
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
Has thanked: 119 times
Been thanked: 297 times

Re: Powering ODROID X2 without barrel jack

Unread post by odroid » Thu Apr 18, 2019 4:52 pm

Pin #46 on the 50pin GPIO header must be 5V input.
https://wiki.odroid.com/old_product/odr ... odroid-xx2

You can find X/X2 schematics from this link.
https://com.odroid.com/sigong/blog/blog ... hp?bid=129

Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 3 guests