[SOLVED] Bluetooth controls on OGST kit running OGST os, Lakka 2nd

Very powerful gaming console solution based on Debian
Post Reply
auriuman78
Posts: 9
Joined: Mon Dec 09, 2019 1:48 pm
languages_spoken: english
ODROIDs: XU4 w/OGST package; 2 MC1 clusters
Has thanked: 1 time
Been thanked: 1 time
Contact:

[SOLVED] Bluetooth controls on OGST kit running OGST os, Lakka 2nd

Unread post by auriuman78 » Mon Jan 13, 2020 9:22 am

Cannot get a successful pairing and connection using Bluetooth Xbox one controller or a ps4 dual shock 4 controller.

I purchased the OGST kit for xu4 asking with an xu4. Using the odroid recommended power supply and Bluetooth adapter https://ameridroid.com/products/usb-blu ... a08d&_ss=r.

Using Bluetoothctl first on OGST then on Lakka, I cannot get a successful pair and connection. It will initially pair and connect but then a few seconds later it disconnects.

On both OGST and Lakka I did invoke the recommended fix for wireless BT controller, disable property ertm by echoing y into sys folder for Bluetooth property disable_ertm.

Steps I followed after ertm fix:
1. Bluetoothctl <enter>
Comes up with message "agent registered"
2. Default-agent <enter>
3. Power on <enter>
4. Discoverable on <enter>
5. Pairable on <enter>
6. Scan on <enter>
a. Controller in pair mode
b. Note controller mac
7. Trust Mac <enter>
8. Pair Mac <enter>
9. Connect Mac <enter>
a. This is the step that fails. All others say ok, good or succeeded. It connects briefly, 2-3 sec, then disconnects.
Last edited by auriuman78 on Fri Jan 17, 2020 2:45 am, edited 1 time in total.

auriuman78
Posts: 9
Joined: Mon Dec 09, 2019 1:48 pm
languages_spoken: english
ODROIDs: XU4 w/OGST package; 2 MC1 clusters
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Bluetooth controls on OGST kit running OGST os, Lakka 2nd

Unread post by auriuman78 » Wed Jan 15, 2020 7:53 am

I'm afraid I've fallen for a rookie pitfall. The documentation clearly states, as the first steps no less, to connect the controller by USB to the xu4.

Following this procedure then comes all the Bluetooth stuff, but only if the controller doesn't auto pair on its own.

I'm skipping the wired connection... I'm certain this will solve my issue and will report back with a confirmation.

auriuman78
Posts: 9
Joined: Mon Dec 09, 2019 1:48 pm
languages_spoken: english
ODROIDs: XU4 w/OGST package; 2 MC1 clusters
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Bluetooth controls on OGST kit running OGST os, Lakka 2nd

Unread post by auriuman78 » Fri Jan 17, 2020 2:44 am

:oops: Just a report back -- this issue was solved after I followed the first part of the written instructions. No problems.

Post Reply

Return to “OGST-XU4”

Who is online

Users browsing this forum: No registered users and 1 guest