LCD Display Info and Monitoring Tool + Kodi install

[n3rs]

Can you please point me to that specific file. The only config file I know, which is /etc/cloudshell2-m*/cloudshell2-m*.conf
I couldn't find the option to only disable HDD temperature monitoring. Only option there is to turn off the LCD on schedule and allow the HDD to spin-down then LCD is off. And I would like to have LCD always running not showing HDD temp though because temperature monitoring doesn't let HDD to spin down

[rooted]

What version are you running? I could be mistaken as I've not used this in a good while.

[n3rs]

Omv6 + cloudshell2-m. 1.0.23-1

[rooted]

@AreaScout wasn't it possible to disable temperature monitoring?

[AreaScout]

Can you please point me to that specific file. The only config file I know, which is /etc/cloudshell2-m*/cloudshell2-m*.conf
I couldn't find the option to only disable HDD temperature monitoring. Only option there is to turn off the LCD on schedule and allow the HDD to spin-down then LCD is off. And I would like to have LCD always running not showing HDD temp though because temperature monitoring doesn't let HDD to spin down

That's not only the temperature monitoring which prevents the HDD's to not spinn down, it's also reading the status of the RAID-Controller which prevents it, you can try to turn the LCD off via the config file and turn on the LCD backlight again with the wiringPi tool https://github.com/hardkernel/wiringPi I think you will find some examples in the forum to turn off and on the LCD with it, in that case the cs2 monitoring tool will not collect data from the RAID-Controller and therefore the HDD will spin down.

Maybe I will release a new version of the tool that does that with an extra switch inside the config file.

RG,
Daniel