Issues with JSM561

Post Reply
paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Issues with JSM561

Unread post by paramedic233 » Tue Aug 06, 2019 7:34 am

Hello,
I'm unable to get the JMicron tool to connect to my cloudshell2.
I've tried everything listed in the readme.txt, and https://wiki.odroid.com/accessory/add-o ... re_upgrade to no avail.
I was trying to install OMV via eMMc card, and I would get a constant blue led, but I was unable to connect to it's known address(I have the mac address reserved for a specific IP address.) through another PC, and then I tried to view it directly by hooking up a monitor, and still no dice, so I figured that the firmware probably needed to be changed, hence why I tried using the jmicron tool.
Is there a better solution?

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Tue Aug 06, 2019 9:50 am

Are you doing the FW update process on the XU4 Linux? or Windows PC?
https://wiki.odroid.com/accessory/add-o ... loudshell2

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Tue Aug 06, 2019 10:30 am

Through a windows pc.

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Tue Aug 06, 2019 10:49 am

Another thing I noticed was that the USB 2.0/USB 3.0 is not lit up, and it does not show it is connected where the ports are.

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Tue Aug 06, 2019 10:50 am

Did you connect the power supply and storage disks?

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Tue Aug 06, 2019 11:00 am

Yes to the power brick and yes to both storage disks.
Of note, this just came back from Ameridroid after having the USB C connection re-soldered onto the board.
Per Dan @ Ameridroid, they repaired, tested, and shipped it out.
My main PC is POP_OS which has a usb creator, but I went through and installed etcher anyway. Shows that it wrote the OMV image correctly.

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Tue Aug 06, 2019 11:07 am

Did you flash the OMV OS image for XU4?
The file name must be OMV_4_Odroid_XU4_HC1_HC2.img.xz.

Is the blue LED on the XU4 blinking? If it is solid on, the system booting process stick at the u-boot stage.
Once the OS is running, the blue LED must be blinking like heartbeat.

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Tue Aug 06, 2019 11:09 am

Yes, I downloaded it from here: https://sourceforge.net/projects/openme ... Computers/

And it is a steady burn, not blinking.

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Tue Aug 06, 2019 11:12 am

Did you extract the xz file to img when you flashed the OS image with Etcher?
Please flash it without extracting.

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Tue Aug 06, 2019 11:13 am

I flashed it without extracting. Etcher extracts when it is writing.

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Tue Aug 06, 2019 11:24 am

Thank you for the confirmation.

Do you use an Orange eMMC?
https://wiki.odroid.com/accessory/emmc/reference_chart

Do you have a 5V/4A PSU to test your XU4 board separately from the CloudShell2?

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Tue Aug 06, 2019 11:39 am

Is that the brick that came with the xu4? If so yes, if not no.
I have to wait until tomorrow as I’m at work now.
I will see if that powers up the odious alone.

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Tue Aug 06, 2019 11:42 am

CloudShell2 needs a 15V/4A PSU while XU4 needs a 5V/4A PSU.

Do you have two PSUs?

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Tue Aug 06, 2019 11:44 am

Yes. I think I know where the little one for the xu4 is.

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Tue Aug 06, 2019 11:49 am

Okay.
Once you assemble the CS2 with XU4, you don't need the little one as you know well.

Until that, let's make your XU4 boot from the Orange eMMC(OMV) with the 5V/4A PSU first.
If you have a spare SD card, it is worth to try it after changing the slide switch position on the XU4 board to narrow down root causes.

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Wed Aug 07, 2019 3:24 am

Re-imaged the file onto the orange emmc using etcher, firmly seated it onto the connection, plugged the cat6 into the XU4, to switch, plugged the 5V/4A plug in, immediately shows a solid blue and red, and the yellow light blinks on the connector. Time for a coffee.

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Wed Aug 07, 2019 4:14 am

While I was waiting, I downloaded Ubuntu 18 from here: https://wiki.odroid.com/odroid-xu4/os_i ... 03-minimal
After I rebooted it, I had the heartbeat blue led, and was able to ssh into it.
I'm giving up on OMV. I only use my XU4 to run my unifi software anyway, instead of buying an overpriced controller from Unifi.

neal
Posts: 190
Joined: Fri Apr 14, 2017 10:02 am
languages_spoken: english
Has thanked: 1 time
Been thanked: 4 times
Contact:

Re: Issues with JSM561

Unread post by neal » Wed Aug 07, 2019 10:30 am

Good to know your XU4 alive. but How is it going with your upgrade JMS561?
I recommend you should do it under XU4 Linux. See this wiki https://wiki.odroid.com/accessory/add-o ... loudshell2

User avatar
AreaScout
Posts: 1034
Joined: Sun Jul 07, 2013 3:05 am
languages_spoken: german, english
ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
N1, Go, VU5A, Show2, CloudShell2,
H2, N2, VU7A, VuShell
Has thanked: 13 times
Been thanked: 42 times
Contact:

Re: Issues with JSM561

Unread post by AreaScout » Wed Aug 07, 2019 1:39 pm

paramedic233 wrote:
Wed Aug 07, 2019 4:14 am
While I was waiting, I downloaded Ubuntu 18 from here: https://wiki.odroid.com/odroid-xu4/os_i ... 03-minimal
After I rebooted it, I had the heartbeat blue led, and was able to ssh into it.
I'm giving up on OMV. I only use my XU4 to run my unifi software anyway, instead of buying an overpriced controller from Unifi.
The OMV image needs at least a 16gb eMMC or SD, it's not working with 8gb eMMC or SD, keep that in mind ;)

RG

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Wed Aug 07, 2019 6:56 pm

AreaScout wrote:
Wed Aug 07, 2019 1:39 pm
paramedic233 wrote:
Wed Aug 07, 2019 4:14 am
While I was waiting, I downloaded Ubuntu 18 from here: https://wiki.odroid.com/odroid-xu4/os_i ... 03-minimal
After I rebooted it, I had the heartbeat blue led, and was able to ssh into it.
I'm giving up on OMV. I only use my XU4 to run my unifi software anyway, instead of buying an overpriced controller from Unifi.
The OMV image needs at least a 16gb eMMC or SD, it's not working with 8gb eMMC or SD, keep that in mind ;)

RG
The Orange emmc is 32gb, so should be more than adequate.

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Wed Aug 07, 2019 6:57 pm

neal wrote:
Wed Aug 07, 2019 10:30 am
Good to know your XU4 alive. but How is it going with your upgrade JMS561?
I recommend you should do it under XU4 Linux. See this wiki https://wiki.odroid.com/accessory/add-o ... loudshell2
It isn't recognizing either of the drives that I formatted to ext4. So there is an issue.

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Thu Aug 08, 2019 10:19 am

Can you show us lsusb, lsusb -t and lsmod outputs?

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Thu Aug 08, 2019 10:18 pm

Code: Select all

root@debian-stretch:~# lsusb
-bash: lsusb: command not found

root@debian-stretch:~# lsusb -t
-bash: lsusb: command not found

root@debian-stretch:~# lsmod
Module                  Size  Used by
evdev                  24576  0
w1_gpio                16384  0
gpio_keys              20480  0
wire                   24576  1 w1_gpio
uio_pdrv_genirq        16384  0
uio                    20480  1 uio_pdrv_genirq
exynos_gpiomem         16384  0
fb_ili9340             16384  2
fbtft_device           40960  0
fbtft                  36864  2 fbtft_device,fb_ili9340
spidev                 20480  0
spi_s3c64xx            20480  0
ip_tables              24576  0
ipv6                  372736  50
extcon_usb_gpio        16384  0


root@debian-stretch:~# update
-------------------------------
Current Version Info Follows:
-------------------------------
Distributor ID: Debian
Release: 9.9
Description: Debian GNU/Linux 9.9 (stretch)
Codename: stretch
Kernel Version: 4.14.133+
Processor Type: armv7l

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Fri Aug 09, 2019 10:28 am

Weird.
Run apt-get install usbutils and try again.

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Sat Aug 10, 2019 4:36 am

Alright, I finally had a moment to sit down and tinker.
I did switch back to ubuntu 16, updated and upgraded it.
Here are the outputs.
Device Version Info Follows:
------------------------------
Distributor ID: Ubuntu
Release: 16.04
Description: Ubuntu 16.04.6 LTS
Codename: xenial
Kernel Version: 4.14.111-139
Processor Type: armv7l
------------------------------
mike@odroid:~$ lsusb
Bus 006 Device 002: ID 0bda:8153 Realtek Semiconductor Corp.
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

mike@odroid:~$ lsusb -t
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M

mike@odroid:~$ lsmod
Module Size Used by
evdev 24576 1
uio_pdrv_genirq 16384 0
gpio_keys 20480 0
extcon_usb_gpio 16384 0
exynos_gpiomem 16384 0
uio 20480 1 uio_pdrv_genirq
fb_ili9340 16384 2
fbtft_device 40960 0
fbtft 36864 2 fbtft_device,fb_ili9340
spidev 20480 0
spi_s3c64xx 20480 0
ipv6 376832 36

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Mon Aug 12, 2019 11:15 am

Once the JSM561 is detected, you can find "JMicron" string on lsusb output.

Did you connect the 30pin flat cable and USB 3.0 cable between XU4 and CloudShell2 board?
https://wiki.odroid.com/accessory/add-o ... assembling
And you have to use 15V/4A PSU with the assembled CS2.

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Mon Aug 12, 2019 9:01 pm

That's all done.
The board just returned from Ameridroid after having the usb c connection resoldered. I wonder if the cable is bad? Ameridroid said that they had tested the connection.

User avatar
mad_ady
Posts: 6363
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4, C1+, C2, N1, H2, N2
Location: Bucharest, Romania
Has thanked: 144 times
Been thanked: 105 times
Contact:

Re: Issues with JSM561

Unread post by mad_ady » Tue Aug 13, 2019 1:42 am

What usb-c connector? The cloudshell/xu4 don't have one

paramedic233
Posts: 55
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Issues with JSM561

Unread post by paramedic233 » Tue Aug 13, 2019 2:18 am

USB 3.0 connector on the Cloudshell2 board, my bad.

User avatar
odroid
Site Admin
Posts: 31760
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 83 times
Been thanked: 241 times
Contact:

Re: Issues with JSM561

Unread post by odroid » Tue Aug 13, 2019 9:45 am

Can you take a picture of the connection of cables?
Is there any bright LED on the CS2 board?

Post Reply

Return to “CloudShell”

Who is online

Users browsing this forum: No registered users and 2 guests