CloudShell2 JMS561 firmware upgrade

Moderators: odroid, mdrjr

CloudShell2 JMS561 firmware upgrade

Unread postby neal » Tue Oct 24, 2017 2:09 pm

A firmware upgrade is now available for CloudShell2.
You can check it follow the link.
https://wiki.odroid.com/accessory/add-o ... re_upgrade

if you have anything about a problem, let me know.
neal
 
Posts: 139
Joined: Fri Apr 14, 2017 10:02 am
languages_spoken: english

Re: CloudShell2 JMS561 firmware upgrade

Unread postby moon.linux » Thu Oct 26, 2017 1:49 am

Thank I did not know about this feature.
moon.linux
 
Posts: 1074
Joined: Thu Oct 02, 2014 11:42 pm
languages_spoken: english

Re: CloudShell2 JMS561 firmware upgrade

Unread postby aphirst » Tue Nov 07, 2017 11:42 pm

As I've mentioned in another thread ( viewtopic.php?f=147&t=28086&p=206233#p206233 ), I believe there to be issues with the most recent version (2017.9.6). In UAS mode I have experienced errors which cause all mounted disks to unmount, necessitating a hard reboot; and when forcing usb-storage mode, after a day or two without issues, both of my CS2-attached disks now fail to report even their UUIDs.
aphirst
 
Posts: 24
Joined: Sun Sep 24, 2017 6:35 pm
languages_spoken: english, german
ODROIDs: XU4, C2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby neal » Wed Nov 08, 2017 11:46 am

aphirst wrote:As I've mentioned in another thread ( viewtopic.php?f=147&t=28086&p=206233#p206233 ), I believe there to be issues with the most recent version (2017.9.6). In UAS mode I have experienced errors which cause all mounted disks to unmount, necessitating a hard reboot; and when forcing usb-storage mode, after a day or two without issues, both of my CS2-attached disks now fail to report even their UUIDs.


Thanks a lot for your feedback.

As you can see, firmware release note of JSM561 on our wiki page, we had reported to the JMicron many times.
Before releasing the latest firmware, I have tested with CloudShell2 for a week. Maybe it is not enough to confirm all of the features.
Running in Openmediavault and PM mode (or RAID 1) at the same time and the other is our Ubuntu 16.04.2 minimal image and PM mode (or RAID 1).
It is still running without your situation.

There are different things between you and me like OS and some peripherals plug on.
Can you show me your Cloudshell2 environment more detail?
Are you using self-powered Hub? There are some issues related to power supply.
What OS do you use? I have never tested any another OS except with them.
How did you test? Samba, iozone, ...and so on.
neal
 
Posts: 139
Joined: Fri Apr 14, 2017 10:02 am
languages_spoken: english

Re: CloudShell2 JMS561 firmware upgrade

Unread postby aphirst » Fri Nov 10, 2017 10:50 pm

Further system details:

Arch Linux
There is a USB3 hub attached to the XU4, but that's to connect an unrelated HDD dock. The CS2 is "directly" attached to the XU4.

I had the disks shared via NFS, and both had XFS filesystems on them. (JBOD)

As I detail in the other thread, there were actually two issues, and I'll summarise them here, in the hope that this minimises any further confusion.

---

Issue #1 - Spontaneous unmounting under heavy load.

After updating to the newest (UAS-enabling) firmware, I keep getting, usually after some load but in principle "randomly", I/O errors, followed by ALL disks (not just CS2-related) being hard-unmounted, necessitating a reboot for them to re-mount.

Journalctl output: https://ptpb.pw/a5gw.txt
Journalctl output (verbose): https://ptpb.pw/4drD.txt

More Journalctl output: https://ptpb.pw/xL60
Dmesg output: https://ptpb.pw/pLRF

Device list: viewtopic.php?f=147&t=28086&p=206233#p206110

More Dmesg output: https://ptpb.pw/PbCL


After some issues in disabling UAS for the CS2 (I had been forgetting to regenerate the boot.scr, for the kernel cmdline options to apply), the issue was alleviated, but then I got the second issue, which is below.

---

Issue #2 - Both CS2-attached disks fail to mount or even be detected.

Dmesg output: https://ptpb.pw/ImsW.txt
Journalctl output: https://ptpb.pw/jK0V

I had suspected this to be a further CS2 firmware issue, but this persisted after I downgraded to the previous version (the last one without UAS support).

It turns out that one of the two disks was dead, failing to work in any other enclosure or SATA port (and when connected to multi-bay adapters, also prevented all other disks from being detected, similar to when on the CS2). It seems as if the disk's controller is fried, rather than the disk itself.

Both attached disks were Seagate 8TB archive disks (SMR). Furthermore, the one which died turned out to be something akin to an engineering sample (i.e. not supposed to be sold to the general public), excluding it from official warranty. After indicating this to the seller, I was immediately offered a full refund. The other disk still works perfectly fine, but I'm going to phase it out of active use soon.

Since the disk failure happened after a chain of UAS-related issues on the CS2, I'm inclined to believe (but am of course totally unable to prove) that the CS2 firmware somehow induced this, in combination with the delicate manner in which SMR disks operate. It's also possible that Issue #1 is also somehow related to my using SMR disks, something which I may be able to later test - in the coming days I will be putting two new WD Reds onto the CS2, possibly even in a HW-RAID configuration, and could re-upgrade the CS2 firmware if I feel confident in testing.
aphirst
 
Posts: 24
Joined: Sun Sep 24, 2017 6:35 pm
languages_spoken: english, german
ODROIDs: XU4, C2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby neal » Mon Nov 13, 2017 6:22 pm

Thanks for your testing.

As I said, I've never tested with Arch Linux O/S. and we don't have time to support another O/S.
With last f/w in JMS561(support uas), there is the known issue that is similar to yours.

Check the issue number 1 in this revision history.
https://wiki.odroid.com/accessory/add-o ... on_history
and the other.
https://wiki.odroid.com/accessory/add-o ... run_script

Can you try our Ubuntu minimal image to narrow down root causes?
https://wiki.odroid.com/accessory/add-o ... e_settings
neal
 
Posts: 139
Joined: Fri Apr 14, 2017 10:02 am
languages_spoken: english

Re: CloudShell2 JMS561 firmware upgrade

Unread postby aphirst » Mon Nov 13, 2017 6:32 pm

Issue #1 on the odroid wiki page doesn't /seem/ relevant, and since it's only one sentence, it's hard as a reader to be sure anyway - is there any more supplementary info about this which is publicly available?

Regarding using the ubuntu minimal image, while certainly possible, I'm not sure when in the foreseeable future I'll be able to find the time. I'll get back to you here on that once I've had the chance.
aphirst
 
Posts: 24
Joined: Sun Sep 24, 2017 6:35 pm
languages_spoken: english, german
ODROIDs: XU4, C2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby cadelle » Thu Mar 01, 2018 5:00 am

Is there an easy way to check the current version of my firmware? some kind of CLI command? I saw the thread regarding plugging the board into windows, disconnecting the ribbon cable and running some software to do it. Just trying to avoid taking the box apart but I will if that is the only option.
cadelle
 
Posts: 47
Joined: Sat Feb 24, 2018 3:24 am
languages_spoken: english
ODROIDs: XU4, cloudshell2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby rooted » Thu Mar 01, 2018 5:54 am

cadelle wrote:Is there an easy way to check the current version of my firmware? some kind of CLI command? I saw the thread regarding plugging the board into windows, disconnecting the ribbon cable and running some software to do it. Just trying to avoid taking the box apart but I will if that is the only option.
Read this section of the wiki ;)

https://wiki.odroid.com/accessory/add-o ... loudshell2

Under Section 1
User avatar
rooted
 
Posts: 4906
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CloudShell2 JMS561 firmware upgrade

Unread postby cadelle » Fri Mar 02, 2018 7:31 am

I can't believe this, I just didn't scroll down far enough :oops:

Thanks Rooted!
cadelle
 
Posts: 47
Joined: Sat Feb 24, 2018 3:24 am
languages_spoken: english
ODROIDs: XU4, cloudshell2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby cadelle » Thu Mar 22, 2018 3:41 am

I apologize for what is most likely a very straight forward question but how does one accomplish this?

Download JMS561 F/W updater(JMS561FwUpdate) and upload it to your CloudShell2.
jms561_fw_updater_onxu4.tgz
Note: Please make sure that the device path is correct.

I use a windows machine and can download a file; I can figure how to get that file from my windows machine to that location but how do I unpack or install that package. Is there not a repo where I can get this package from directly and install on my cloudshell?
cadelle
 
Posts: 47
Joined: Sat Feb 24, 2018 3:24 am
languages_spoken: english
ODROIDs: XU4, cloudshell2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby neal » Thu Mar 22, 2018 11:00 am

cadelle wrote:I apologize for what is most likely a very straight forward question but how does one accomplish this?

Download JMS561 F/W updater(JMS561FwUpdate) and upload it to your CloudShell2.
jms561_fw_updater_onxu4.tgz
Note: Please make sure that the device path is correct.

I use a windows machine and can download a file; I can figure how to get that file from my windows machine to that location but how do I unpack or install that package. Is there not a repo where I can get this package from directly and install on my cloudshell?


Follow the below instruction. if you have a problem let me know.
1. Connect your cloudShell2 via SSH
2. Try this command
Code: Select all
 # wget https://wiki.odroid.com/_media/accessory/add-on_boards/xu4_cloudshell2/jms561_fw_updater_onxu4.tgz
 # tar xzf ./jms561_fw_updater_onxu4.tgz
 # cd JMS561

3. After that follow the instruction at wiki.
neal
 
Posts: 139
Joined: Fri Apr 14, 2017 10:02 am
languages_spoken: english

Re: CloudShell2 JMS561 firmware upgrade

Unread postby cadelle » Thu Mar 22, 2018 1:18 pm

Unfortunately that didn't help. I forget the errors but no dice. Did it via windows and according to windows I am running the latest version. Still not seeing my HDDs though...
cadelle
 
Posts: 47
Joined: Sat Feb 24, 2018 3:24 am
languages_spoken: english
ODROIDs: XU4, cloudshell2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby neal » Thu Mar 22, 2018 3:52 pm

neal wrote:
cadelle wrote:I apologize for what is most likely a very straight forward question but how does one accomplish this?

Download JMS561 F/W updater(JMS561FwUpdate) and upload it to your CloudShell2.
jms561_fw_updater_onxu4.tgz
Note: Please make sure that the device path is correct.

I use a windows machine and can download a file; I can figure how to get that file from my windows machine to that location but how do I unpack or install that package. Is there not a repo where I can get this package from directly and install on my cloudshell?


Follow the below instruction. if you have a problem let me know.
1. Connect your cloudShell2 via SSH
2. Try this command
Code: Select all
 # wget https://wiki.odroid.com/_media/accessory/add-on_boards/xu4_cloudshell2/jms561_fw_updater_onxu4.tgz
 # tar xzf ./jms561_fw_updater_onxu4.tgz
 # cd JMS561

3. After that follow the instruction at wiki.


Unfortunately that didn't help. I forget the errors but no dice. Did it via windows and according to windows I am running the latest version. Still not seeing my HDDs though...

hi, @cadelle
That instruction did it via Windows. There are many utils under the Windows can connect to cloudShell2 using SSH. Did you try that?
neal
 
Posts: 139
Joined: Fri Apr 14, 2017 10:02 am
languages_spoken: english

Re: CloudShell2 JMS561 firmware upgrade

Unread postby cadelle » Fri Mar 23, 2018 1:34 am

Sorry about the confusion. I was able to SSH just fine and I did the first two commands without a problem but when I tried to change directory it didn't work. At that point I just took things apart and connected the board to the Windows machine and verified I had the latest f/w. Just for good measure I changed to a previous version and then back to the most current.

Thank you
cadelle
 
Posts: 47
Joined: Sat Feb 24, 2018 3:24 am
languages_spoken: english
ODROIDs: XU4, cloudshell2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby Obihoernchen » Sun Jun 03, 2018 11:23 pm

I have had similar issues as aphirst since latest firmware upgrade with UAS.
The controller disconnects randomly.

Dmesg shows:
Code: Select all
[ 2202.971010] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 2202.971023] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x1a 1a 00 1c 00 ff 00
[ 2202.971191] scsi host0: uas_eh_bus_reset_handler start
[ 2203.056152] usb 4-1.1: reset SuperSpeed USB device number 3 using xhci-hcd
[ 2203.076804] usb 4-1.1: device firmware changed
[ 2203.077043] scsi host0: uas_post_reset: alloc streams error -19 after reset
[ 2203.077530] usb 4-1.1: USB disconnect, device number 3
[ 2203.079639] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2203.151302] XFS (sda1): Unmounting Filesystem

With previous firmware or with UAS disabled everything works fine.

For anyone with similar issues I added usb-storage.quirks=152d:0561:u to disable UAS to my kernel cmdline (edit /boot/boot.ini) for now.

Check with "lsusb -t". It should show "Driver=usb-storage" and not "Driver=uas" anymore.
Code: Select all
        |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M


My system:
Code: Select all
Armbian (Debian 9.4 stretch)
Linux version 4.9.61-odroidxu4 (root@armbian) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08) ) #2 SMP PREEMPT Wed Nov 22 16:34:23 CET 2017
2x 3TB Hitachi in RAID 1
Controller FW: v158.001.000.004 (V9E.01.00.04)


I might compile the latest 4.14 kernel and test with this one. Furthermore I will try to disable just some UAS commands (f,g,j,t options).
Any S.M.A.R.T functionality is disabled, so it's not issue #1 as described in the fw revision history.

PS: Also see: viewtopic.php?f=147&t=28086
Last edited by Obihoernchen on Mon Jun 04, 2018 4:58 am, edited 1 time in total.
Visit My Blog (Odroid guides)
Follow me on Twitter
User avatar
Obihoernchen
 
Posts: 37
Joined: Tue Oct 13, 2015 5:23 am
Location: Germany
languages_spoken: german, english
ODROIDs: XU4, XU4Q + CloudShell 2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby Obihoernchen » Mon Jun 04, 2018 4:53 am

Looks like setting usb-storage.quirks=152d:0561:f fixes the issue [f = NO_REPORT_OPCODES (don't use report opcodes command, uas only)].
UAS is stable so far.

Other JMicron controller seem to have similar issues with report opcodes commands: https://github.com/hardkernel/linux/blo ... #L131-L136
Maybe the JSM561 needs similar treatment?

I will test this for 1 week and report. Without this setting the FS unmounted every <24h.
Last edited by Obihoernchen on Mon Jun 04, 2018 4:59 pm, edited 1 time in total.
Visit My Blog (Odroid guides)
Follow me on Twitter
User avatar
Obihoernchen
 
Posts: 37
Joined: Tue Oct 13, 2015 5:23 am
Location: Germany
languages_spoken: german, english
ODROIDs: XU4, XU4Q + CloudShell 2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby odroid » Mon Jun 04, 2018 11:56 am

@Obihoernchen,
Can you please check the HDD read/write performance with the quirk option f?
User avatar
odroid
Site Admin
 
Posts: 27946
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: CloudShell2 JMS561 firmware upgrade

Unread postby Obihoernchen » Mon Jun 04, 2018 4:57 pm

Hey @odroid,

will do by the end of this week. Any particular benchmark I should run?
Visit My Blog (Odroid guides)
Follow me on Twitter
User avatar
Obihoernchen
 
Posts: 37
Joined: Tue Oct 13, 2015 5:23 am
Location: Germany
languages_spoken: german, english
ODROIDs: XU4, XU4Q + CloudShell 2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby odroid » Mon Jun 04, 2018 6:11 pm

Just a couple of simple dd tests should be okay.
Write command
dd if=/dev/zero of=test oflag=direct bs=8M count=128
Read command
dd if=test of=/dev/null iflag=direct bs=8M
User avatar
odroid
Site Admin
 
Posts: 27946
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: CloudShell2 JMS561 firmware upgrade

Unread postby Obihoernchen » Fri Jun 08, 2018 7:31 am

I did some dd benchs with different block sizes with and without UAS with 4.9 and 4.14.
I did all tests several times and even rebooted several times. Always +-1 the same result.

- 4.9 seems to have some write performance issues with UAS
- For HDDs there is basically no difference between usb-storage and UAS
- Besides the uas write performance 4.9 and 4.14 seem to perform similar

Code: Select all
Armbian (Debian 9.4 stretch)
2x 3TB Hitachi in RAID 1
Controller FW: v158.001.000.004 (V9E.01.00.04)


Image
Code: Select all
Linux version 4.9.61-odroidxu4 (root@armbian) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08) ) #2 SMP PREEMPT Wed Nov 22 16:34:23 CET 2017


Image
Code: Select all
Linux version 4.14.48-odroidxu4 (root@nightly) (gcc version 6.4.1 20171012 (Linaro GCC 6.4-2017.11)) #399 SMP PREEMPT Thu Jun 7 11:38:20 UTC 2018


I'm testing 4.14 with UAS for a couple of days now. If everything works fine, I'll just stick to it, otherwise I'll use usb-storage because it makes no difference for my setup.
Visit My Blog (Odroid guides)
Follow me on Twitter
User avatar
Obihoernchen
 
Posts: 37
Joined: Tue Oct 13, 2015 5:23 am
Location: Germany
languages_spoken: german, english
ODROIDs: XU4, XU4Q + CloudShell 2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby odroid » Fri Jun 08, 2018 11:58 am

Really appreciate sharing very useful test result.

Right, spinning HDD storages don't have any significant performance difference with UAS driver.
User avatar
odroid
Site Admin
 
Posts: 27946
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: CloudShell2 JMS561 firmware upgrade

Unread postby paramedic233 » Mon Jun 11, 2018 9:56 am

I get a failure as well.
mike@odroid:~$ uname -a
Linux odroid.xxxxxxx.xx 4.14.47-139 #1 SMP PREEMPT Sun Jun 3 20:08:16 -03 2018 armv7l armv7l armv7l GNU/Linux


mike@odroid:~$ wget https://wiki.odroid.com/_media/accessor ... _onxu4.tgz
--2018-06-10 20:51:50-- https://wiki.odroid.com/_media/accessor ... _onxu4.tgz
Resolving wiki.odroid.com (wiki.odroid.com)... 211.43.222.12
Connecting to wiki.odroid.com (wiki.odroid.com)|211.43.222.12|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1074260 (1.0M) [application/octet-stream]
Saving to: ‘jms561_fw_updater_onxu4.tgz’

jms561_fw_updater_o 100%[===================>] 1.02M 70.8KB/s in 20s

2018-06-10 20:52:13 (52.2 KB/s) - ‘jms561_fw_updater_onxu4.tgz’ saved [1074260/1074260]

mike@odroid:~$ tar xzf ./jms561_fw_updater_onxu4.tgz
mike@odroid:~$ cd JMS561
mike@odroid:~/JMS561$ ./JMS561FwUpdate -v
JMicron Firmware Update Tool v0.0.0.1
Copyright (C) 2017 JMicron Corp.

mike@odroid:~/JMS561$ sudo ./JMS561FwUpdate -d /dev/sda -f ./jms561_Hardkernel_v158.001.000.004.bin -b ./backup.bin
[sudo] password for mike:
Update Firmware file name: ./jms561_Hardkernel_v158.001.000.004.bin
Backup Firmware file name: ./backup.bin
Backup the ROM code sucessfully.
Programming & Compare Success!!

mike@odroid:~/JMS561$ ./JMS561FwUpdate -d /dev/sda -v
ERR : open device fail
Get Bridge version FAIL!

mike@odroid:~/JMS561$
paramedic233
 
Posts: 21
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby rooted » Mon Jun 11, 2018 10:41 am

You have to shutdown, pull the power plug, replug.

Is this not in the wiki instructions? @odroid could it be added?

*edit*
It's there in orange

System power ON and OFF required to apply!!!
After F/W upgrade, you have to system off safely and pull out power plug your CloudShell2.
And then connect it(Power on) again.


@neal
Instead of this being a note shouldn't it be part of the instructions. Like step 11?

Also it should read something like this.

After upgrading the firmware this procedure must be followed.

Safely shutdown the device either through the GUI or by typing "sudo shutdown" in an ssh terminal.

Pull the power plug then wait two seconds.

Plug the device back in. When the device boots it will be using the updated firmware.

See Example (1)
User avatar
rooted
 
Posts: 4906
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CloudShell2 JMS561 firmware upgrade

Unread postby paramedic233 » Mon Jun 11, 2018 10:53 pm

@rooted,
Thanks for the reply.
When I received the error message I was hesitant to reboot fearing that I would lose my build.
-medic
paramedic233
 
Posts: 21
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby paramedic233 » Mon Jun 11, 2018 11:44 pm

mike@odroid:~/JMS561$ sudo ./JMS561FwUpdate -d /dev/sda -v
[sudo] password for mike:
Bridge Firmware Version: v158.1.0.4

PROFIT

-medic
paramedic233
 
Posts: 21
Joined: Tue May 01, 2018 4:47 am
languages_spoken: english
ODROIDs: XU4Q, Cloudshell2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby Obihoernchen » Tue Jun 12, 2018 1:46 am

FYI:
I did some more test with UAS and kernel 4.14.
It's just unstable. From time to time the connection just drops.
Sometimes it works hours, sometimes days without an issue (transferring ~1TB data). But then suddenly the connection dropped.

I'm sticking to usb-storage driver now. Didn't experience a single issue in this mode so far.
You might want to add a note to the wiki about UAS stability. Might help other users if they experience similar issues after a FW upgrade.
Visit My Blog (Odroid guides)
Follow me on Twitter
User avatar
Obihoernchen
 
Posts: 37
Joined: Tue Oct 13, 2015 5:23 am
Location: Germany
languages_spoken: german, english
ODROIDs: XU4, XU4Q + CloudShell 2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby rooted » Tue Jun 12, 2018 3:41 am

Obihoernchen wrote:FYI:
I did some more test with UAS and kernel 4.14.
It's just unstable. From time to time the connection just drops.
Sometimes it works hours, sometimes days without an issue (transferring ~1TB data). But then suddenly the connection dropped.

I'm sticking to usb-storage driver now. Didn't experience a single issue in this mode so far.
You might want to add a note to the wiki about UAS stability. Might help other users if they experience similar issues after a FW upgrade.
I'm running the base firmware and have transferred over 3 or 4 terabytes without a single issue. Are you using RAID?
User avatar
rooted
 
Posts: 4906
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CloudShell2 JMS561 firmware upgrade

Unread postby Obihoernchen » Tue Jun 12, 2018 6:07 am

Yes RAID 1.
With base firmware you mean the older firmware without UAS support?
Because the old firmware was running fine for ~1 year for me as well.
Visit My Blog (Odroid guides)
Follow me on Twitter
User avatar
Obihoernchen
 
Posts: 37
Joined: Tue Oct 13, 2015 5:23 am
Location: Germany
languages_spoken: german, english
ODROIDs: XU4, XU4Q + CloudShell 2

Re: CloudShell2 JMS561 firmware upgrade

Unread postby rooted » Tue Jun 12, 2018 6:43 am

Obihoernchen wrote:Yes RAID 1.
With base firmware you mean the older firmware without UAS support?
Because the old firmware was running fine for ~1 year for me as well.
AFAIK the first revision does support UAS, it and the last revision.

I am not using RAID.
User avatar
rooted
 
Posts: 4906
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CloudShell2 JMS561 firmware upgrade

Unread postby neal » Tue Jun 12, 2018 10:49 am

@neal
Instead of this being a note shouldn't it be part of the instructions. Like step 11?

Also it should read something like this.

After upgrading the firmware this procedure must be followed.

Safely shutdown the device either through the GUI or by typing "sudo shutdown" in an ssh terminal.

Pull the power plug then wait two seconds.

Plug the device back in. When the device boots it will be using the updated firmware.

See Example (1)


Applied.
Thank you @rooted
neal
 
Posts: 139
Joined: Fri Apr 14, 2017 10:02 am
languages_spoken: english

Re: CloudShell2 JMS561 firmware upgrade

Unread postby rooted » Tue Jun 12, 2018 11:40 am

Thanks @neal
User avatar
rooted
 
Posts: 4906
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)


Return to CloudShell

Who is online

Users browsing this forum: No registered users and 1 guest