Board dimensions

Moderators: mdrjr, odroid

Board dimensions

Unread postby grzeslawm » Thu Mar 23, 2017 9:42 pm

Hi,
I'm wondering to use Odroid C2 with 3.5inch LCD Shield in one of my project, but I need to install them in DIN Rail Case. So first of all I checked the Shield dimension.
But in the official specification (on Hardkernel and odroid wiki pages) I found this:
-LCD Active Area 98.96(H) x 73.44(V)mm;
-Board Size 95(H)x56(V)x17(T)mm;
So the LCD Active Area is bigger then the whole board? Or I misunderstand something? Please someone to check this data, I will be very grateful.
grzeslawm
 
Posts: 5
Joined: Fri May 13, 2016 4:56 pm
languages_spoken: english, polish
ODROIDs: C1+, C2, VU7+, WeatherBoard2, WiFi module 0, Bluetooth module 2

Re: Board dimensions

Unread postby odroid » Fri Mar 24, 2017 12:25 am

LCD Active area should be
48.96(H) x 73.44(V)mm
And board dimensions should be
56(H) x 95(V)mm

I've updated the product description page and WiKi page.
Sorry for the typo errors. ;)
User avatar
odroid
Site Admin
 
Posts: 26429
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: Board dimensions

Unread postby grzeslawm » Fri Mar 24, 2017 2:30 am

Not a problem. I was just a little confused :).
Thanks for quick reply and specification update.
grzeslawm
 
Posts: 5
Joined: Fri May 13, 2016 4:56 pm
languages_spoken: english, polish
ODROIDs: C1+, C2, VU7+, WeatherBoard2, WiFi module 0, Bluetooth module 2


Return to 3.5inch LCD Shield

Who is online

Users browsing this forum: No registered users and 2 guests