xu4 xorg and console setup

phaseshifter
Posts: 3014
Joined: Fri May 08, 2015 9:12 am
languages_spoken: english
ODROIDs: N-1..c1+ ..c-2..xu3 lite,xu4...u-3..
u-2...other odroid acc`s as well
Contact:

xu4 xorg and console setup

Unread post by phaseshifter » Mon Oct 31, 2016 8:38 pm

yep it`s good to go ctrl+alt-F1 for console and ctrl+alt-F7 for xorg
if you want to run the l.c.d you must detach the hdmi cable before you start the xu4
..i.e it works with the cable detached.

Code: Select all

sudo apt-get install fbset
enable touch driver

Code: Select all

sudo apt-get install device-tree-compiler
sudo cp /media/boot/exynos5422-odroidxu3.dtb /media/boot/exynos5422-odroidxu3.dtb.old
sudo fdtput -t s /media/boot/exynos5422-odroidxu3.dtb /hsi2c@12CB0000/sx865x@49 status "okay"
sudo reboot
t

Add following lines in "/etc/modprobe.d/lcd35.conf" file.

Code: Select all

 joe /etc/modprobe.d/lcd35.conf
enter this code

Code: Select all

options fbtft_device name=flexpfb rotate=270
options flexfb chip=ili9488
save and exit
Add following lines in "/etc/modules" file.

Code: Select all

joe /etc/modules

Code: Select all

fbtft_device
flexfb
sx865x
ad the following line to the "/etc/rc.local"

Code: Select all

joe /etc/rc.local

Code: Select all

con2fbmap 0 1
create a new xorg.conf file

Code: Select all

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
sudo rm -fr /etc/X11/xorg.conf.d/exynos.conf

Add following lines in "/etc/X11/xorg.conf" file.

Code: Select all

joe /etc/X11/xorg.conf
enter this code

Code: Select all

Section "Device"
        Identifier    "C fbdev"
        Driver        "fbdev"
        Option        "fbdev" "/dev/fb0"
EndSection
for the screen calibrator

Code: Select all

sudo apt-get install xinput-calibrator
this is a little bare bones..how ever i got it running for fourdee so he could fix his script on his installer
Last edited by phaseshifter on Tue Nov 01, 2016 12:24 am, edited 5 times in total.
Build It And They Will Come...Be Bold And Mighty Forces Will Come To Your Aid..!!!

Post Reply

Return to “3.5inch LCD Shield”

Who is online

Users browsing this forum: No registered users and 2 guests