Power Supply PCB for C2

Moderators: mdrjr, odroid

Power Supply PCB for C2

Unread postby gvdbe.fr » Sun Jul 22, 2018 1:56 am

Hi to all.
I bought MEAN WELL Power Supply for my C2. But doesn't power on the board. No led flashing. Nothing up.
The power is stable around 5/6 V.

Anybody have experience about PCB Power Supply compliance for C2 ans others boards ?
gvdbe.fr
 
Posts: 25
Joined: Sun Jul 15, 2018 11:53 pm
languages_spoken: english,french

Re: Power Supply PCB for C2

Unread postby rooted » Sun Jul 22, 2018 2:29 am

6v is too high, the voltage shouldn't be higher than 5.25v AFAIK.
User avatar
rooted
 
Posts: 5586
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: Power Supply PCB for C2

Unread postby moon.linux » Sun Jul 22, 2018 2:40 am

Use official power supply.
Code: Select all
 https://www.hardkernel.com/main/products/prdt_info.php?g_code=G144402211758

If you are looking to power up cluster of odroid c2 boards below product.
Code: Select all
Anker PowerPort 10 (60W 10-Port USB Charging Hub) Multi-Port USB Charger
moon.linux
 
Posts: 1159
Joined: Thu Oct 02, 2014 11:42 pm
languages_spoken: english

Re: Power Supply PCB for C2

Unread postby Jojo » Mon Jul 23, 2018 4:09 pm

I personally used a Meanwell RS-15-5 (5V, 3A) PSUs many times, along with a bunch of very different PSUs. They all worked perfectly.

So just make sure your ODROID unit is ok/functional by using a known-to-work reference PSU, and then any other 5V PSU with compatible specifications (amperage, stability, etc.) will work. I personally have no "official" PSU at all.
How to ask questions the smart way:
http://www.catb.org/esr/faqs/smart-questions.html
Jojo
 
Posts: 524
Joined: Mon May 18, 2015 12:13 am
Location: Germany
languages_spoken: english, german
ODROIDs: C1, C1+, C2, HC1, HC2, VU8C


Return to Hardware and peripherals

Who is online

Users browsing this forum: No registered users and 1 guest