ODROID-C2, RTC shield & UPS3

Moderators: odroid, mdrjr

ODROID-C2, RTC shield & UPS3

Unread postby arrigo » Fri Jan 19, 2018 11:14 pm

Hi,

I am thinking of setting up several mini-servers using the ODROID-C2 but as I would also like to have a UPS available I was looking at the UPS3 for it. At the same time I would like the RTC to work and I am wondering if it is possible to have both the RTC shield and UPS3 at the same time with an extender for the GPIO or they exclude one-another. For the Raspberry Pi 3 one can purchase a UPS which also acts as an RTC but I cannot tell if the UPS3 also acts as an RTC or not.

Obviously I would also need a case fitting both so any suggestions would be welcome.

Thank you in advance,

Arrigo
arrigo
 
Posts: 5
Joined: Fri Jan 19, 2018 11:09 pm
languages_spoken: english,italian,french,spanish

Re: ODROID-C2, RTC shield & UPS3

Unread postby odroid » Sat Jan 20, 2018 12:16 pm

UPS3 uses pin #11, #13 and #26
https://wiki.odroid.com/accessory/power ... droid-ups3
RTC Shield uses pin #3, #5 and #7
https://wiki.odroid.com/accessory/add-o ... rtc_shield
So they can work together at the same time.

But I have no idea about the casing.
User avatar
odroid
Site Admin
 
Posts: 29098
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: ODROID-C2, RTC shield & UPS3

Unread postby arrigo » Wed Jan 31, 2018 7:58 pm

Thank you for this. I had looked at the pictures but could not quite figure it out.
arrigo
 
Posts: 5
Joined: Fri Jan 19, 2018 11:09 pm
languages_spoken: english,italian,french,spanish


Return to Hardware and peripherals

Who is online

Users browsing this forum: Google [Bot] and 1 guest