3.5 LCD Case with UPS3: Plan request

Moderators: mdrjr, odroid

3.5 LCD Case with UPS3: Plan request

Unread postby jeepcrazy » Sat Feb 18, 2017 3:28 am

Good afternoon!

I recently purchased a C2 with 3.5 LCD and UPS3. The case I purchased doesn't accommodate the UPS3, but it seems easy enough to increase the size on the sides to allow for the taller form factor. Are the plans available for that case to allow for modification? If not, is there a case available that works with both the LCD and the UPS3?

Thanks for any help you can provide and have a great day!

Posts: 1
Joined: Sat Feb 18, 2017 3:21 am
languages_spoken: english
ODROIDs: C1+, C2

Re: 3.5 LCD Case with UPS3: Plan request

Unread postby odroid » Sat Feb 18, 2017 11:51 am

Some people need a space to install a 2.5inch HDD in the 3.5inch LCD enclosure.
Some other people want to embed the HiFi Shield board in a case.
It is not easy to meet all the requirements. Sorry about that.

You might need to make your own design based on an open source laser cut design file something like these.
User avatar
Site Admin
Posts: 25848
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English

Return to Hardware and peripherals

Who is online

Users browsing this forum: No registered users and 5 guests