touch screen support - JoyIt Touch Display RB-LCD10-2

Post Reply
gg_a
Posts: 8
Joined: Sun Jan 05, 2020 8:38 pm
languages_spoken: english
ODROIDs: C2
Has thanked: 0
Been thanked: 0
Contact:

touch screen support - JoyIt Touch Display RB-LCD10-2

Post by gg_a »

Re: Request Android touch screen support here.
by odroid » Thu Jan 09, 2020 1:54 am
@gg_a,
Since we have no same touchscreen sample, it is really hard to know what's wrong.
Make a new topic in the C2 Android sub-forum and show us "demsg" outputs. We will try to find a clue.


Hi,

here are the dmesg output after booting...

Hope you can find something, otherwise I have to try to give back the doisplay, but this will be difficult because of the elased time...

Thanks
gg_a

Code: Select all

[    0.000000@0] Initializing cgroup subsys cpu
[    0.000000@0] Initializing cgroup subsys cpuacct
[    0.000000@0] Linux version 3.14.29-gb08bf9f (jenkins@build) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Nov 28 12:51:33 KST 2019
[    0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
[    0.000000@0] secmon: share mem setup
[    0.000000@0] Reserved memory: initialized node linux,secmon, compatible id aml_secmon_memory
[    0.000000@0] __reserved_mem_alloc_size: linux,meson-fb
[    0.000000@0] fb: Reserved memory: created fb at 0x0000000078000000, size 128 MiB
[    0.000000@0] Reserved memory: initialized node linux,meson-fb, compatible id amlogic, fb-memory
[    0.000000@0] __reserved_mem_alloc_size: linux,di
[    0.000000@0] DI reserved memory: created CMA memory pool at 0x0000000076200000, size 30 MiB
[    0.000000@0] Reserved memory: initialized node linux,di, compatible id amlogic, di-mem
[    0.000000@0] __reserved_mem_alloc_size: linux,ion-dev
[    0.000000@0] linux,ion-dev add multi user:ffffffc001dbd6b8
[    0.000000@0] ion_dev mem setup
[    0.000000@0] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
[    0.000000@0] ppmgr share mem setup
[    0.000000@0] linux,ion-dev add multi user:ffffffc001dc6370
[    0.000000@0] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
[    0.000000@0] __reserved_mem_alloc_size: linux,codec_mm_cma
[    0.000000@0] Reserved memory: created CMA memory pool at 0x0000000068400000, size 188 MiB
[    0.000000@0] Reserved memory: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
[    0.000000@0] __reserved_mem_alloc_size: linux,picdec
[    0.000000@0] Reserved memory: created CMA memory pool at 0x0000000065400000, size 48 MiB
[    0.000000@0] Reserved memory: initialized node linux,picdec, compatible id shared-dma-pool
[    0.000000@0] __reserved_mem_alloc_size: linux,codec_mm_reserved
[    0.000000@0] Reserved memory: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
[    0.000000@0] __reserved_mem_alloc_size: linux,jpegenc_cma
[    0.000000@0] Reserved memory: created CMA memory pool at 0x000000005ec00000, size 36 MiB
[    0.000000@0] Reserved memory: initialized node linux,jpegenc_cma, compatible id shared-dma-pool
[    0.000000@0] cma: Reserved 8 MiB at 5e400000
[    0.000000@0] On node 0 totalpages: 486912
[    0.000000@0]   Normal zone: 8568 pages used for memmap
[    0.000000@0]   Normal zone: 0 pages reserved
[    0.000000@0]   Normal zone: 486912 pages, LIFO batch:31
[    0.000000@0] psci: probing function IDs from device-tree
[    0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0741a7000 s19328 r8192 d21632 u49152
[    0.000000@0] pcpu-alloc: s19328 r8192 d21632 u49152 alloc=12*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 478344
[    0.000000@0] Kernel command line: root=/dev/mmcblk0p2 rw init=/init rootwait console=ttyS0,115200 hdmimode=custombuilt modeline=1280,800,69300,49394,60,1280,1328,1360,1403,800,803,809,821,0,0,1 hdmitx=cec0x0 vout=hdmi disablehpd=false logo=osd1,loaded,0x3f800000,1080p60hz androidboot.hardware=odroidc2 androidboot.serialno=HKC213254E00D8ED androidboot.selinux=disabled suspend_hdmiphy=0 led_onoff=on max_freq=1536 maxcpus=4 disable_vu7=false touch_invert_x=false touch_invert_y=false usbmulticam=false gpiopower= backlight_pwm=no ddrclock= test_mt_pid=0000 test_mt_vid=0000
[    0.000000@0] logo: get hdmimode: custombuilt
[    0.000000@0] modeline parsing - 1280
[    0.000000@0] modeline parsing - 800
[    0.000000@0] modeline parsing - 69300
[    0.000000@0] modeline parsing - 49394
[    0.000000@0] modeline parsing - 60
[    0.000000@0] modeline parsing - 1280
[    0.000000@0] modeline parsing - 1328
[    0.000000@0] modeline parsing - 1360
[    0.000000@0] modeline parsing - 1403
[    0.000000@0] modeline parsing - 800
[    0.000000@0] modeline parsing - 803
[    0.000000@0] modeline parsing - 809
[    0.000000@0] modeline parsing - 821
[    0.000000@0] modeline parsing - 0
[    0.000000@0] modeline parsing - 0
[    0.000000@0] modeline parsing - 1
[    0.000000@0] modeline - horpixels 1280
[    0.000000@0] modeline - verpixels 800
[    0.000000@0] modeline - pixel_clock 69300
[    0.000000@0] modeline - hor_freq 49394
[    0.000000@0] modeline - ver_freq 60
[    0.000000@0] modeline - hdisp 1280
[    0.000000@0] modeline - hsyncstart 1328
[    0.000000@0] modeline - hsyncend 1360
[    0.000000@0] modeline - htotal 1403
[    0.000000@0] modeline - vdisp 800
[    0.000000@0] modeline - vsyncstart 803
[    0.000000@0] modeline - vsyncend 809
[    0.000000@0] modeline - vtotal 821
[    0.000000@0] modeline - hsync_polarity 0
[    0.000000@0] modeline - vsync_polarity 0
[    0.000000@0] modeline - progress_mode 1
[    0.000000@0] fmt_para - vic 787
[    0.000000@0] fmt_para - name custombuilt
[    0.000000@0] fmt_para - pixel_repetition_factor 0
[    0.000000@0] fmt_para - progress mode 1
[    0.000000@0] fmt_para - scrambler_en 0
[    0.000000@0] fmt_para - tmds_clk_div40 0
[    0.000000@0] fmt_para - tmds_clk 69300
[    0.000000@0] fmt_para - pixel_freq 69300
[    0.000000@0] fmt_para - h_freq 49394
[    0.000000@0] fmt_para - v_freq 60000
[    0.000000@0] fmt_para - hsync_polarity 0
[    0.000000@0] fmt_para - vsync_polarity 0
[    0.000000@0] fmt_para - h_active 1280
[    0.000000@0] fmt_para - h_total 1403
[    0.000000@0] fmt_para - h_blank 123
[    0.000000@0] fmt_para - h_front 48
[    0.000000@0] fmt_para - h_sync 32
[    0.000000@0] fmt_para - h_back 43
[    0.000000@0] fmt_para - v_active 800
[    0.000000@0] fmt_para - v_total 821
[    0.000000@0] fmt_para - v_blank 21
[    0.000000@0] fmt_para - v_front 3
[    0.000000@0] fmt_para - v_sync 6
[    0.000000@0] fmt_para - v_back 12
[    0.000000@0] logo: osd1
[    0.000000@0] logo: loaded
[    0.000000@0] logo: 0x3f800000
[    0.000000@0] logo: 1080p60hz
[    0.000000@0] dvfs [get_max_freq] - max_freq : 1536000000
[    0.000000@0] gpio_key- gpiopower_setup gpiopower : 0
[    0.000000@0] hid: +test_mt_pid_setup test_mt_pid : 0x0
[    0.000000@0] hid: -test_mt_vid_setup test_mt_vid : 0x0
[    0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000@0] Memory: 1471248K/1947648K available (8775K kernel code, 944K rwdata, 3216K rodata, 970K init, 3291K bss, 476400K reserved)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vmalloc : 0xffffff8000000000 - 0xffffff8040000000   (  1024 MB)
[    0.000000@0]     vmemmap : 0xffffff8040010000 - 0xffffff80421d0000   (    33 MB)
[    0.000000@0]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc078000000   (  1920 MB)
[    0.000000@0]       .init : 0xffffffc001c37000 - 0xffffffc001d29b80   (   971 kB)
[    0.000000@0]       .text : 0xffffffc001080000 - 0xffffffc001c36de4   ( 11996 kB)
[    0.000000@0]       .data : 0xffffffc001d2a000 - 0xffffffc001e16208   (   945 kB)
[    0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000@0] NR_IRQS:64 nr_irqs:64 0
[    0.000005@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
[    0.000023@0] mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000a994
[    0.000069@0] local timer MESON TIMER-G mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000c998
[    0.000091@0] local timer MESON TIMER-H mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000e99c
[    0.000112@0] local timer MESON TIMER-I mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff80000109a0
[    0.000122@0] Switching to timer-based delay loop
[    0.000347@0] Console: colour dummy device 80x25
[    0.000361@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.000369@0] pid_max: default: 32768 minimum: 301
[    0.000434@0] Security Framework initialized
[    0.000446@0] SELinux:  Initializing.
[    0.000486@0] SELinux:  Starting in permissive mode
[    0.000525@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000531@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.002241@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
[    0.002249@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
[    0.002256@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
[    0.002263@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
[    0.003970@0] Initializing cgroup subsys debug
[    0.003978@0] Initializing cgroup subsys freezer
[    0.004003@0] ftrace: allocating 31289 entries in 123 pages
[    0.031689@0] /cpus/cpu@0: Missing clock-frequency property
[    0.031706@0] /cpus/cpu@1: Missing clock-frequency property
[    0.031713@0] /cpus/cpu@2: Missing clock-frequency property
[    0.031720@0] /cpus/cpu@3: Missing clock-frequency property
[    0.031728@0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[    0.071634@0] Meson chip version = RevC (1F:C - 0:0)
[    0.090813@1] CPU1: Booted secondary processor
[    0.110778@2] CPU2: Booted secondary processor
[    0.130776@3] CPU3: Booted secondary processor
[    0.130829@0] Brought up 4 CPUs
[    0.130840@0] SMP: Total of 4 processors activated.
[    0.131352@0] devtmpfs: initialized
[    0.144786@0] pinctrl core: initialized pinctrl subsystem
[    0.145358@0] regulator-dummy: no parameters
[    0.145911@0] NET: Registered protocol family 16
[    0.147788@0] register canvas platform driver
[    0.147857@0] register rdma platform driver
[    0.148773@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001d32000
[    0.148800@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.149351@0] DMA: preallocated 256 KiB pool for atomic allocations
[    0.150602@0] software IO TLB [mem 0x5a800000-0x5ac00000] (4MB) mapped at [ffffffc05a800000-ffffffc05abfffff]
[    0.150607@0] Serial: AMBA PL011 UART driver
[    0.150891@0] hdmitx: system: amhdmitx_init
[    0.150896@0] hdmitx: system: Ver: 2014May6
[    0.150960@0] aml_i2c version: 20140813
[    0.151035@0] tv_vout: tv_init_module
[    0.151044@0] tv_vout: major number 254 for disp
[    0.151047@0] vout_notify: vout_register_server
[    0.151051@0] tv_vout: register tv module server ok
[    0.151124@0] codec_mm:codec_mm_module_init
[    0.151283@0] gxbb clk HIU base is 0xffffff800005a000
[    0.151287@0] gxbb clk ao base is 0xffffff800005c000
[    0.151321@0] register mpll_clk_out0 success done
[    0.151327@0] register mpll_clk_out1 success done
[    0.151333@0] register mpll_clk_out2 success done
[    0.151495@0] register sys pll success done
[    0.151530@0] clkrate [ xtal 	] : 24000000Hz
[    0.151534@0] clkrate [ 32Khz 	] : 32000Hz
[    0.151539@0] clkrate [ clk81 	] : 166666666Hz
[    0.151543@0] clkrate [ fixed_pll 	] : 2000000000Hz
[    0.151547@0] clkrate [ fclk_div2 	] : 1000000000Hz
[    0.151551@0] clkrate [ fclk_div3 	] : 666666000Hz
[    0.151555@0] clkrate [ fclk_div4 	] : 500000000Hz
[    0.151559@0] clkrate [ fclk_div5 	] : 400000000Hz
[    0.151562@0] clkrate [ fclk_div7 	] : 285714000Hz
[    0.151585@0] gxbb clock initialization complete
[    0.151676@0] msr_clk_reg0=ffffff800005e75c,msr_clk_reg2=ffffff800006a764
[    0.153037@0] amlogic iomap probe done
[    0.153472@0] Init pinux probe!
[    0.154326@0] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
[    0.154870@0] aml-i2c c1108500.i2c: add adapter aml_i2c_adap1(ffffffc05ba310e0)
[    0.155157@0] aml-i2c c11087c0.i2c: add adapter aml_i2c_adap2(ffffffc05ba318e0)
[    0.155356@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
[    0.155367@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
[    0.155470@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
[    0.155480@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
[    0.155693@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000
[    0.156683@0] codec_mm has 2 memory regions
[    0.156696@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_cma ok
[    0.156704@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_reserved ok
[    0.156772@0] codec_mm has 2 memory regions
[    0.156780@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_cma ok
[    0.156787@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_reserved ok
[    0.158012@0] VPU driver version: v01
[    0.158020@0] vpu driver detect cpu type: gxbaby
[    0.158032@0] load vpu_clk in dts: 666667000Hz(7)
[    0.158103@0] vpu_probe OK
[    0.158422@0] hdmitx: system: amhdmitx_probe
[    0.158771@0] hdmitx hpd irq = 89
[    0.159064@0] hdmitx20: Mapped PHY: 0xc0800000
[    0.159070@0] hdmitx20: Mapped PHY: 0xc1104400
[    0.159087@0] hdmitx20: Mapped PHY: 0xc8100000
[    0.159092@0] hdmitx20: Mapped PHY: 0xc8834000
[    0.159096@0] hdmitx20: Mapped PHY: 0xc883a000
[    0.159101@0] hdmitx20: Mapped PHY: 0xc883c000
[    0.159109@0] hdmitx20: Mapped PHY: 0xd0100000
[    0.159114@0] hdmitx20: Mapped PHY: 0xda83a000
[    0.159124@0] hdmitx: alread display in uboot 0x10
[    0.159146@0] avmute set to 1
[    0.159519@0] canvas_probe reg=00000000c8838000,size=400
[    0.159535@0] canvas maped reg_base =ffffff80000d2000
[    0.162773@0] rdma_probe
[    0.166087@0] hdmitx: system: irq 80000002
[    0.231184@0] bio: create slab <bio-0> at 0
[    0.231900@0] SCSI subsystem initialized
[    0.232325@0] usbcore: registered new interface driver usbfs
[    0.232404@0] usbcore: registered new interface driver hub
[    0.232504@0] usbcore: registered new device driver usb
[    0.232741@0] Linux video capture interface: v2.00
[    0.232904@0] pps_core: LinuxPPS API ver. 1 registered
[    0.232910@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.232964@0] PTP clock support registered
[    0.233468@0] logo: logo_init
[    0.233479@0] tv_vout: tv_set_current_vmode[698]fps_target_mode=65
[    0.233485@0] tv_vout: mode is 65,sync_duration_den=1,sync_duration_num=60
[    0.233493@0] switch_vpu_mem_pd: vencp ON
[    0.233499@0] tv_vout: TV mode custombuilt selected.
[    0.233503@0] tv_vout: already display in uboot
[    0.233507@0] tv_vout: new mode =custombuilt set ok
[    0.233511@0] vout_serve: vinfo mode is: custombuilt
[    0.233515@0] logo: set vmode: custombuilt
[    0.233520@0] switch_vpu_mem_pd: viu_osd1 ON
[    0.233525@0] switch_vpu_mem_pd: viu_osd2 ON
[    0.233529@0] switch_vpu_mem_pd: viu_osd_scale ON
[    0.233737@0] osd_rdma: osd_rdma_init: rmda_table p=0x5e441000,op=0x5e441000 , v=0xffffff80000d7000
[    0.233841@0] Advanced Linux Sound Architecture Driver Initialized.
[    0.234325@0] NetLabel: Initializing
[    0.234329@0] NetLabel:  domain hash size = 128
[    0.234333@0] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.234365@0] NetLabel:  unlabeled traffic allowed by default
[    0.235556@0] Switched to clocksource Timer-E
[    0.271610@0] NET: Registered protocol family 2
[    0.272054@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.272162@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.272384@0] TCP: Hash tables configured (established 16384 bind 16384)
[    0.272451@0] TCP: reno registered
[    0.272459@0] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.272493@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.272655@0] NET: Registered protocol family 1
[    0.272816@0] RPC: Registered named UNIX socket transport module.
[    0.272821@0] RPC: Registered udp transport module.
[    0.272824@0] RPC: Registered tcp transport module.
[    0.272828@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.275049@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.275102@0] audit: initializing netlink subsys (disabled)
[    0.275132@0] audit: type=2000 audit(0.250:1): initialized
[    0.275756@0] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.281424@0] VFS: Disk quotas dquot_6.5.2
[    0.281609@0] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.285168@0] NFS: Registering the id_resolver key type
[    0.285206@0] Key type id_resolver registered
[    0.285211@0] Key type id_legacy registered
[    0.285232@0] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.286954@0] fuse init (API version 7.22)
[    0.287443@0] msgmni has been set to 3433
[    0.287662@0] SELinux:  Registering netfilter hooks
[    0.288764@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.288773@0] io scheduler noop registered
[    0.288777@0] io scheduler deadline registered
[    0.288912@0] io scheduler cfq registered (default)
[    0.338892@0] meson-rng c8834000.rng: hwrng registered
[    0.341705@0] loop: module loaded
[    0.342160@0] zram: Created 1 device(s) ...
[    0.342851@0] mtdoops: mtd device (mtddev=name/number) must be supplied
[    0.343311@0] tun: Universal TUN/TAP device driver, 1.6
[    0.343316@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.347448@0] libphy: stmmac: probed
[    0.347458@0] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    0.347463@0] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[    0.347770@0] PPP generic driver version 2.4.2
[    0.347973@0] PPP BSD Compression module registered
[    0.347979@0] PPP Deflate Compression module registered
[    0.347991@0] PPP MPPE Compression module registered
[    0.347996@0] NET: Registered protocol family 24
[    0.348108@0] usbcore: registered new interface driver asix
[    0.348210@0] usbcore: registered new interface driver ax88179_178a
[    0.348284@0] usbcore: registered new interface driver cdc_ether
[    0.348358@0] usbcore: registered new interface driver net1080
[    0.348435@0] usbcore: registered new interface driver cdc_subset
[    0.348508@0] usbcore: registered new interface driver zaurus
[    0.348609@0] usbcore: registered new interface driver cdc_ncm
[    0.348814@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.348819@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[    0.348953@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.349050@0] usbcore: registered new interface driver cdc_acm
[    0.349055@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.349142@0] usbcore: registered new interface driver usb-storage
[    0.349322@0] usbcore: registered new interface driver usbserial
[    0.349889@0] mousedev: PS/2 mouse device common for all mice
[    0.350363@0] usbcore: registered new interface driver xpad
[    0.350446@0] usbcore: registered new interface driver dwav_usb_mt
[    0.350595@0] rtc-pcf8563 1-0051: chip found, driver version 0.4.3
[    0.350697@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    0.350704@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    0.350776@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    0.350782@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    0.350854@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    0.350859@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    0.350865@0] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[    0.351008@0] rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0
[    0.351144@0] i2c /dev entries driver
[    0.351529@0] usbcore: registered new interface driver uvcvideo
[    0.351533@0] USB Video Class driver (1.1.1)
[    0.351537@0] gspca_main: v2.14.0 registered
[    0.352170@0] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.352835@0] ledtrig-cpu: registered to indicate activity on CPUs
[    0.353647@0] usbcore: registered new interface driver usbhid
[    0.353654@0] usbhid: USB HID core driver
[    0.353955@0] ashmem: initialized
[    0.354106@0] logger: created 256K log 'log_main'
[    0.354239@0] logger: created 256K log 'log_events'
[    0.354376@0] logger: created 256K log 'log_radio'
[    0.354526@0] logger: created 256K log 'log_system'
[    0.354984@0] ==uart0 reg addr = ffffff800024e4c0
[    0.355006@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[    0.355018@0] ttyS0 use xtal 24000000 change 0 to 115200
[    0.504090@0] hdmitx: plugin
[    0.632916@0] 00ffffffffffff00631800000000000006160103800000000ad7a5a2594a9624
[    0.632916@0] 145054a3080081c00101010101010101010101010101121b007b502015303020
[    0.632916@0] 360005a3100000180e1f008051001e304080370020560000001c000000fd0032
[    0.632916@0] 4c1e5010000a202020202020000000fc004141410a20202020202020200a0195
[    0.632916@0] 
[    0.632916@0] 
[    0.632948@0] 020322715090050403070206011f141312161115202309070768030c001000b8
[    0.632948@0] 2dc0011d007251d01e206e28550000000000001e8c0ad08a20e02d10103e9600
[    0.632948@0] 000000000018011d80d0721c1620102c258000000000009e011d00bc52d01e20
[    0.632948@0] b8285540c48e2100001e8c0ad090204031200c405500000000000018000000e0
[    0.632948@0] 
[    0.632948@0] 
[    0.632952@0] EDID Parser:
[    0.633014@0] hdmitx: edid: find IEEEOUT
[    0.633047@0] 
[    0.633057@0] hdmitx: video: get current mode: custombuilt
[    0.633083@0] hdmitx: system: already init VIC = 0  Now VIC = 787
[    0.633089@0] hdmitx: rx no SCDC present indicator
[    0.635097@0] hdmitx: ddc rd8b error 0x54 0x01
[    0.637108@0] hdmirx version is 1.4 or below
[    0.637110@0] hdmitx: system: set pll
[    0.637111@0] hdmitx: system: param->VIC:787
[    0.647189@0] hdmitx: set clk of VIC = 787 done
[    0.647216@0] hdmitx_set_hw[4552] set VIC = 787
[    0.777559@0] hdmitx: system: phy setting done
[    0.806566@0] Sink is HDMI device
[    0.806570@0] Source reading EDID
[    0.835561@0] hdmtix: set audio
[    0.835568@0] hdmitx tx_aud_src = 0
[    0.835576@0] hdmitx: system: irq 80000001
[    0.835603@0] hdmitx aud_n_para = 24576
[    0.835619@0] hdmitx set channel status
[    0.835670@0] hdmtix: set audio
[    0.835677@0] hdmitx tx_aud_src = 0
[    0.835700@0] hdmitx aud_n_para = 24576
[    0.835715@0] hdmitx set channel status
[    0.835771@0] Start = 0x10000100   End = 0x100001ff
[    0.835777@0] [0x10000103]: 0x00000008
[    0.835779@0] [0x10000104]: 0x00000001
[    0.835880@0] [0x10000170]: 0x00000010
[    0.835896@0] [0x10000180]: 0x000000ff
[    0.835899@0] [0x10000181]: 0x000000ff
[    0.835901@0] [0x10000182]: 0x00000003
[    0.835903@0] [0x10000183]: 0x00000007
[    0.835906@0] [0x10000184]: 0x0000003f
[    0.835908@0] [0x10000185]: 0x00000002
[    0.835911@0] [0x10000187]: 0x000000ff
[    0.835914@0] [0x10000188]: 0x00000003
[    2.352847@1] console [ttyS0] enabled
[    2.356831@0] ==uart1 reg addr = ffffff80002504c0
[    2.361140@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    2.370819@0] enter  cpufreq
[    2.373298@0] probe  cpufreq okay
[    2.376677@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000
[    2.384328@0] dwc_otg c9100000.dwc2_b: dwc_otg_driver_probe(ffffffc05bb1ee00)
[    2.384394@0] dwc_otg_driver_probe : g_dwc_power_reset enable
[    2.489125@0] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
[    2.492163@0] dwc_otg c9100000.dwc2_b: base=0xffffff8001680000
[    2.492169@0] dwc_otg c9100000.dwc2_b: dwc_otg_device=0xffffffc0598f3b40
[    2.494792@0] dwc_otg: Core Release: 3.10a
[    2.496221@0] dwc_otg: Setting default values for core params
[    2.501913@0] dwc_otg: curmode: 1, host_only: 1
[    2.506402@0] dwc_otg c9100000.dwc2_b: DMA config: BURST_DEFAULT
[    2.508645@0] dwc_otg: Using Buffer DMA mode
[    2.510612@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.515880@0] dwc_otg: Working on port type = HOST
[    2.520785@0] dwc_otg dwc2_b: DWC OTG Controller
[    2.525200@0] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
[    2.532108@0] dwc_otg dwc2_b: irq 63, io mem 0x00000000
[    2.537274@0] dwc_otg: -------hcd->flags.d32 = 0
[    2.541849@0] dwc_otg: Init: Port Power? op_state=1
[    2.546670@0] dwc_otg: Init1: Power Port (0)
[    2.551457@0] hub 1-0:1.0: USB hub found
[    2.554786@0] hub 1-0:1.0: 1 port detected
[    2.558976@0] dwc_otg c9000000.dwc2_a: dwc_otg_driver_probe(ffffffc05bb1f600)
[    2.559013@0] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
[    2.567466@0] dwc_otg c9000000.dwc2_a: base=0xffffff8001700000
[    2.567472@0] dwc_otg c9000000.dwc2_a: dwc_otg_device=0xffffffc05a401840
[    2.580051@0] dwc_otg: Core Release: 3.10a
[    2.580071@0] dwc_otg: Setting default values for core params
[    2.584207@0] dwc_otg: curmode: 1, host_only: 0
[    2.590710@0] dwc_otg c9000000.dwc2_a: DMA config: BURST_DEFAULT
[    2.592942@0] dwc_otg: Using Buffer DMA mode
[    2.592962@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.598180@0] dwc_otg: Working on port type = OTG
[    2.602832@0] dwc_otg: Current port type: SLAVE
[    2.607419@0] dwc_otg dwc2_a: DWC OTG Controller
[    2.611896@0] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
[    2.618812@0] dwc_otg dwc2_a: irq 62, io mem 0x00000000
[    2.624418@0] hub 2-0:1.0: USB hub found
[    2.627864@0] hub 2-0:1.0: 1 port detected
[    2.632006@0] dwc_otg: Dedicated Tx FIFOs mode
[    2.636543@0] dwc_otg: using timer detectid change, ffffffc059911800
[    2.643057@0] secmon has 1 memory regions
[    2.646589@0] secmon: share in base: 0xffffff800025e000, share out base: 0xffffff8000272000
[    2.654847@0] secmon secmon.3: assigned reserved memory node linux,secmon ok
[    2.661880@0] secmon: probe done
[    2.665186@0] storage: storage in base: 0xffffff8001780000
[    2.670461@0] storage: storage out base: 0xffffff8001800000
[    2.675975@0] storage: storage block base: 0xffffff8001880000
[    2.681661@0] storage: probe done!
[    2.685136@0] Error: Driver 'RTL8211F Gigabit Ethernet' is already registered, aborting...
[    2.693227@0] libphy: RTL8211F Gigabit Ethernet: Error -16 in registering driver
[    2.700825@0] aml_sd_emmc_probe: line 2954
[    2.704606@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[    2.714193@0] aml_sd_emmc_reg_init 677
[    2.717789@0] pdata->caps 60007
[    2.720820@0] pdata->caps2 0
[    2.723667@0] get property:                ocr_avail, value:0x00200080
[    2.730180@0] get property:                    f_min, value:0x00061a80
[    2.736623@0] get property:                    f_max, value:0x0510ff40
[    2.743073@0] get property:             max_req_size, value:0x00020000
[    2.749549@0] get property:                   irq_in, value:0x00000003
[    2.756035@0] get property:                  irq_out, value:0x00000005
[    2.756071@1] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[    2.768528@0] get property:              power_level, value:0x00000001
[    2.774994@0] get property:                  gpio_cd, str:
[    2.780428@0] get property:               gpio_power, str:
[    2.785861@0] get property:                  pinname, str:sd
[    2.791460@0] get property:                 jtag_pin, str:
[    2.796898@0] get property:                card_type, value:0x00000005
[    2.803365@0] get property:                gpio_dat3, str:
[    2.808806@0] get property:               gpio_volsw, str:
[    2.866718@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.866920@0] aml_sd_emmc_probe: line 2954
[    2.886661@2] [aml_is_card_insert][0;40;33m card OUT
[    2.886661@2] [0m
[    2.886703@2] [aml_is_card_insert][0;40;33m card OUT
[    2.886703@2] [0m<6>[    2.913612@0] aml_sd_emmc_reg_init 677
[    2.913722@0] pdata->caps 80000547
[    2.915095@0] pdata->caps2 a1
[    2.918036@0] get property:                ocr_avail, value:0x00200080
[    2.924490@0] get property:                    f_min, value:0x00061a80
[    2.930967@0] get property:                    f_max, value:0x0bebc200
[    2.935589@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.944013@0] get property:             max_req_size, value:0x00020000
[    2.950493@0] dwc_otg: Indeed 
[    2.950500@0] get property:                  pinname, str:emmc
[    2.950503@0] get property:                card_type, value:0x00000001
[    2.950510@0] get property:                gpio_dat3, str:
[    2.950513@0] get property:                 hw_reset, str:
[    2.976432@1] it is in host mode hprt0 = 00001101
[    3.005573@0] aml_emmc_hw_reset 1356
[    3.005584@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    3.009556@3] ion_dev has 1 memory regions
[    3.026239@3] fb: osd_init_module
[    3.026360@3] fb: viu vsync irq: 35
[    3.027382@3] meson-fb has 1 memory regions
[    3.032849@3] meson-fb meson-fb.12: assigned reserved memory node linux,meson-fb ok
[    3.039155@3] fb: osd_probe vinfo:ffffffc001dbf3e0
[    3.043852@3] fb: Frame buffer memory assigned at
[    3.048346@3] fb:     phy: 0x78000000, vir:0xffffff8003c00000, size=98304K
[    3.055324@3] fb: osd_set_res_bootargs : mode 65
[    3.059939@3] fb: fb def : 1280 800 1280 1600 32
[    3.064465@3] fb: init fbdev bpp is:32
[    3.068182@3] fb: ---------------clear fb0 memory
[    3.100528@1] fb: osd[0] canvas.idx =0x40
[    3.100546@1] fb: osd[0] canvas.addr=0x78000000
[    3.103381@1] fb: osd[0] canvas.width=5120
[    3.107448@1] fb: osd[0] canvas.height=1600
[    3.114668@1] fb: Frame buffer memory assigned at
[    3.116109@1] fb:     phy: 0x7e000000, vir:0xffffff8001a00000, size=1024K
[    3.129364@3] emmc: BKOPS_EN bit is not set
[    3.131174@0] fb: osd probe OK
[    3.131280@0] [aml_sd_voltage_switch][0;40;32m switch to 1.8V for a non-uhs device.
[    3.131280@0] [0m
[    3.131441@0] vout_serve: vout_init_module
[    3.131551@0] vout_serve: meson_vout_probe
[    3.131634@0] vout_serve: create vout attribute OK
[    3.131747@0] ge2d: ge2d_init_module
[    3.131756@0] ge2d: ge2d_dev major:244
[    3.132046@0] ge2d: ge2d clock is 400 MHZ
[    3.132050@0] ge2d: ge2d: pdev=ffffffc05baf2e00, irq=182, rstc=0xffffffc05ba5b380, clk=ffffffc05ba53a00
[    3.132117@0] ge2d: mapped phy: 0xd0160000
[    3.132123@0] ge2d: ge2d start monitor
[    3.132256@0] ge2d: ge2d workqueue monitor start
[    3.132325@0] codec:Amlogic A/V streaming port init
[    3.133807@0] codec:get gate demux control ok ffffffc05ba75d00
[    3.133811@0] codec:get gate parser_top control ok ffffffc05ba75900
[    3.133816@0] codec:get gate vpu_intr control ok ffffffc05ba75500
[    3.133821@0] codec:get gate vdec control ok ffffffc05ba75100
[    3.134278@0] codec:[tsync_pcr_init]init success.
[    3.135164@0] amvenc_avc_probe -- reserved memory config fail.
[    3.135166@0] amvenc_avc - cma memory pool size: 32 MB
[    3.135189@0] encode_wq_init.
[    3.135194@0] encode start monitor.
[    3.135297@0] encode workqueue monitor start.
[    3.135637@0] jpegenc module init
[    3.135696@0] jpegenc probe start.
[    3.135700@0] jpegenc has 1 memory regions
[    3.135737@0] jpegenc jpegenc.24: assigned reserved memory node linux,jpegenc_cma ok
[    3.135741@0] jpegenc - cma memory pool size: 36 MB
[    3.135755@0] jpegenc memory config sucess, buff size is 0x2400000, level: 8M
[    3.135756@0] jpegenc_wq_init.
[    3.135945@0] jpegenc probe end.
[    3.136080@0] codec:picdec_driver_probe called.
[    3.136083@0] picdec has 1 memory regions
[    3.136097@0] picdec picdec.20: assigned reserved memory node linux,picdec ok
[    3.136099@0] codec:picdec_driver_probe done.
[    3.136100@0] codec:reserved memory config fail , use CMA	.
[    3.177450@1] hub 1-1:1.0: USB hub found
[    3.177732@1] hub 1-1:1.0: 4 ports detected
[    3.312706@2] codec:cma memory is 65400000 , size is  3000000
[    3.315755@1] codec:0 addr is 65400000################
[    3.320298@1] codec:1 addr is 65577000################
[    3.323458@3] emmc: clk 200000000 SDR mode tuning start
[    3.323683@3] rx_tuning_result[0][0] = 10
[    3.323926@3] rx_tuning_result[0][2] = 10
[    3.324145@3] rx_tuning_result[0][3] = 10
[    3.324364@3] rx_tuning_result[0][4] = 10
[    3.324366@3] best_win_start =2, best_win_size =4
[    3.324369@3] sd_emmc_regs->gclock =0x1000245, sd_emmc_regs->gadjust =0x32000
[    3.324372@3] emmc: gclock =0x1000245, gdelay=0x54854065
[    3.324374@3] gadjust=0x32000
[    3.324459@3] emmc: new HS200 MMC card at address 0001
[    3.371630@3] emmc: clock 200000000, 8-bit-bus-width
[    3.371630@3]  
[    3.371631@3] mmcblk0: emmc:0001 8GTF4R 7.28 GiB 
[    3.382776@1] switch_vpu_mem_pd: vpu_arb ON
[    3.387399@3]  mmcblk0: p1 p2 p3 p4
[    3.390466@3] codec:create_ge2d_work_queue video task ok
[    3.396414@3] codec:register clk_set_setting cpu[31]
[    3.400677@3] di_module_init ok.
[    3.403655@3] di_module_init: major 238
[    3.407717@3] di_probe
[    3.409920@3] deinterlace has 1 memory regions
[    3.414193@3] di reveser memory 0x76200000, size 30MB.
[    3.419280@3] deinterlace deinterlace.22: assigned reserved memory node linux,di ok
[    3.427002@3] rdma_register, rdma_table_addr ffffff80004ea000 rdma_table_addr_phy 5e44a000 reg_buf ffffffc059e28000
[    3.437214@3] rdma_register success, handle 1 table_size 8192
[    3.442896@3] di_probe allocate rdma channel 1.
[    3.447389@3] DI hw version 2.
[    3.450406@3] 0x000000c3:Y=c3,U=0,V=0
[    3.454022@3] 0x000000c4:Y=c4,U=0,V=0
[    3.455910@0] usb 1-1.1: new full-speed USB device number 3 using dwc_otg
[    3.464378@3] 0x000000c5:Y=c5,U=0,V=0
[    3.468000@3] 0x000000c6:Y=c6,U=0,V=0
[    3.471617@3] 0x000000c7:Y=c7,U=0,V=0
[    3.475239@3] 0x000000c8:Y=c8,U=0,V=0
[    3.478868@3] 0x000000c9:Y=c9,U=0,V=0
[    3.482486@3] 0x000000ca:Y=ca,U=0,V=0
[    3.486113@3] 0x000000cb:Y=cb,U=0,V=0
[    3.489729@3] 0x000000cc:Y=cc,U=0,V=0
[    3.493353@3] 0x000000cd:Y=cd,U=0,V=0
[    3.496980@3] 0x000000ce:Y=ce,U=0,V=0
[    3.500597@3] 0x000000cf:Y=cf,U=0,V=0
[    3.504315@3] di_probe here.
[    3.507091@3] switch_vpu_mem_pd: di_pre OFF
[    3.511444@3] efusekeynum: 4
[    3.514057@3] efusekeyname:             mac	offset:     0	size:     6
[    3.520463@3] efusekeyname:          mac_bt	offset:     6	size:     6
[    3.526838@3] efusekeyname:        mac_wifi	offset:    12	size:     6
[    3.533203@3] efusekeyname:            usid	offset:    18	size:    16
[    3.539824@3] efuse efuse.7: probe OK!
[    3.543570@3] 6aml_unifykeys_init done!
[    3.547194@3] ppmgr module init func called
[    3.551354@3] ppmgr_driver_probe called
[    3.555108@3] ppmgr has 1 memory regions
[    3.559024@3] init ppmgr memsource 74200000->761fffff
[    3.564265@3] ppmgr_probe done
[    3.567600@3] ionvideo-000: V4L2 device registered as video13
[    3.572722@3] [dsp]register dsp to char divece(257)
[    3.573003@1] input: eGalax Inc. USB TouchController Pen as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.0/0003:0EEF:0001.0001/input/input0
[    3.573423@1] input: eGalax Inc. USB TouchController as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.0/0003:0EEF:0001.0001/input/input1
[    3.573875@1] hid-multitouch 0003:0EEF:0001.0001: input,hiddev0: USB HID v1.00 Pointer [eGalax Inc. USB TouchController] on usb-dwc2_b-1.1/input0
[    3.614590@1] amaudio: driver amaudio succuess!
[    3.618427@1] amlvideo_init called
[    3.621606@1] amlvideo_create_instance called
[    3.626098@1] v4l2_dev.name=:amlvideo-000
[    3.630182@1] amlvideo-000: V4L2 device registered as video10
[    3.635779@1] 
[    3.635779@1] 
[    3.635779@1]  VECM init
[    3.635779@1] 
[    3.643563@1] saradc c1108680.saradc: initialized by BL30
[    3.648543@1] saradc c1108680.saradc: calibration start:
[    3.653788@1] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[    3.660481@1] saradc c1108680.saradc: nominal=0, value=7
[    3.665741@1] saradc c1108680.saradc: nominal=256, value=254
[    3.671335@1] saradc c1108680.saradc: nominal=512, value=509
[    3.676941@1] saradc c1108680.saradc: nominal=768, value=764
[    3.682541@1] saradc c1108680.saradc: nominal=1023, value=1020
[    3.688294@1] saradc c1108680.saradc: calibration end: coef=4112
[    3.694392@1] remote: Driver init
[    3.697579@1] remote: platform_data g_remote_ao_offset=580
[    3.702939@1] remote: platform_data irq =228
[    3.707195@1] remote: set drvdata completed
[    3.711398@1] remote: device_create_file completed 
[    3.716577@1] input: aml_keypad as /devices/meson-remote.9/input/input3
[    3.723097@1] remote: input_register_device completed 
[    3.728084@1] remote: [0x480] = 0x1dd0190
[    3.732005@1] remote: [0x484] = 0xf800ca
[    3.735893@1] remote: [0x488] = 0x82006e
[    3.739767@1] remote: [0x48c] = 0x3c0030
[    3.743648@1] remote: [0x490] = 0x30fa0013
[    3.747715@1] remote: [0x498] = 0x6f19000
[    3.751670@1] remote: [0x49c] = 0xbe40
[    3.755378@1] remote: [0x580] = 0xfa00a0
[    3.759260@1] remote: [0x584] = 0xfa00a0
[    3.763141@1] remote: [0x588] = 0xfa00a0
[    3.767040@1] remote: [0x58c] = 0x640030
[    3.770912@1] remote: [0x590] = 0x30fa0013
[    3.774965@1] remote: [0x598] = 0x961b800
[    3.779096@1] remote: [0x59c] = 0x9740
[    3.782728@1] remote: [0x5a0] = 0x104
[    3.786275@1] remote: [0x5a4] = 0x0
[    3.790092@1] remote: 
[    3.791875@1] input: Logitech Optical USB Mouse as /devices/dwc2_b/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C016.0002/input/input4
[    3.803180@0] [0x5a8] = 0x0
[    3.803454@1] hid-generic 0003:046D:C016.0002: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-dwc2_b-1.3/input0
[    3.817364@0] remote: set_remote_mode[72]
[    3.821298@0] remote: remote config major:234
[    3.825880@0] remote: physical address:0x59dd4000
[    3.830794@0] aml dvb init
[    3.833498@0] aml-thermal : min state:500000 400 1 2
[    3.838214@0] aml-thermal : not found gpucore node
[    3.842672@0] aml-thermal : gpu coef:437, pp:3
[    3.852157@0] aml-thermal : cdev1 set upper to 3
[    3.852177@0] aml-thermal : cdev2 set upper to 3
[    3.856219@0] aml-thermal : cdev0 set upper to 3
[    3.863818@1] aml_wdt c11098d0.amlogic-watchdog: creat work queue for watch dog
[    3.868268@1] aml_wdt c11098d0.amlogic-watchdog: AML Watchdog Timer probed done
[    3.875453@1] 6--------------------------------------------------------
[    3.881917@1] 6odroid_sysfs_init(327) : Sleep Disable Flag SET!!(Wake_lock_init)
[    3.889332@1] 6--------------------------------------------------------
[    3.896173@1] input: vt-input as /devices/virtual/input/input5
[    3.901869@1] 6Virtual-Key input driver registered!!
[    3.907487@1] adbattery: android dummy battery driver loaded
[    3.912528@1] usbcore: registered new interface driver usbio
[    3.918196@1] odroid-gpioctrl odroid_gpioctrl.29: odroid_gpioctrl_probe : success!
[    3.925791@1] odroid-gpiomem c8834000.odroid_gpiomem: Initialised: Registers at 0xc8834000
[    3.933799@1] odroid-encoder odroid_encoder.45: encoder_probe
[    3.939618@1] input: odroid-encoder as /devices/odroid_encoder.45/input/input6
[    3.946796@1] odroid-encoder odroid_encoder.45: encoder_probe success!!
[    3.953430@1] usbcore: registered new interface driver snd-usb-audio
[    3.959945@1] *****enter pcm2bt_codec_probe
[    3.963615@1] pcm5102_platform_probe
[    3.967190@1] enter aml_soc_platform_pcm2bt_probe
[    3.972027@1] divider=16,frac=33920000,SDMval=4523
[    3.976606@1] enter aml_pcm_dai_probe
[    3.980139@1] [aml-spdif-dai]enter aml_dai_spdif_init
[    3.985115@1] aml_spdif_probe
[    3.988159@1] enter spdif_dit_probe
[    3.991838@1] enter aml_asoc_init
[    3.994733@1] p_aml_audio->hp_disable=1
[    3.998531@1] falied to get spk event delay time
[    4.002320@0] random: nonblocking pool is initialized
[    4.008098@1] spk_event delay_time = 0
[    4.012335@1] aml_snd_card aml_m8_snd.38: pcm5102 <-> I2S.30 mapping ok
[    4.018746@1] aml_snd_card aml_m8_snd.38: dit-hifi <-> SPDIF.32 mapping ok
[    4.025226@1] enter aml_pcm2bt_preallocate_dma_buffer stream: 0
[    4.031083@1] enter aml_pcm2bt_preallocate_dma_buffer stream: 1
[    4.036982@1] aml_snd_card aml_m8_snd.38: pcm2bt-pcm <-> PCM.34 mapping ok
[    4.051477@1] audio use jtag pinmux as i2s output, read val =ffffffff
[    4.061991@1] GACT probability NOT on
[    4.065367@1] Mirror/redirect action on
[    4.069167@1] u32 classifier
[    4.072002@1]     Actions configured
[    4.075542@1] Netfilter messages via NETLINK v0.30.
[    4.080427@1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    4.086958@1] ctnetlink v0.93: registering with nfnetlink.
[    4.092426@1] xt_time: kernel timezone is -0000
[    4.096571@1] ipip: IPv4 over IPv4 tunneling driver
[    4.101871@1] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.106867@1] arp_tables: (C) 2002 David S. Miller
[    4.111545@1] TCP: cubic registered
[    4.114955@1] Initializing XFRM netlink socket
[    4.120029@1] NET: Registered protocol family 10
[    4.124663@1] mip6: Mobile IPv6
[    4.127061@1] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    4.132724@1] sit: IPv6 over IPv4 tunneling driver
[    4.138281@1] NET: Registered protocol family 17
[    4.141884@1] NET: Registered protocol family 15
[    4.146530@1] Bridge firewalling registered
[    4.150627@1] l2tp_core: L2TP core driver, V2.0
[    4.155069@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    4.159986@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    4.165690@1] l2tp_netlink: L2TP netlink interface
[    4.170436@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    4.176481@1] l2tp_debugfs: L2TP debugfs support
[    4.181023@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    4.187627@1] NET: Registered protocol family 35
[    4.192190@1] Key type dns_resolver registered
[    4.197522@1] Registering SWP/SWPB emulation handler
[    4.201928@1] regulator-dummy: disabling
[    4.206570@1] Number of LUNs=8
[    4.208368@1] Mass Storage Function, version: 2009/09/11
[    4.213628@1] LUN: removable file: (no medium)
[    4.218281@1] android_usb gadget: android_usb ready
[    4.222995@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    4.228558@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    4.234309@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    4.239941@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    4.245700@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    4.251318@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    4.257019@1] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[    4.263135@1] rtc-pcf8563 1-0051: hctosys: unable to read the hardware clock
[    4.271616@1] input: cec_input as /devices/virtual/input/input7
[    4.279667@1] 6enter meson_pm_probe!
[    4.279788@1] meson_pm_probe done
[    4.283119@1] ALSA device list:
[    4.286000@1]   #0: AML-M8AUDIO
[    4.289445@1] ttyS0 use xtal 24000000 change 115200 to 115200
[    4.290147@3] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (40)
[    4.299201@3] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (40)
[    4.312215@3] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.316233@3] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    4.322639@3] devtmpfs: mounted
[    4.325861@3] Freeing unused kernel memory: 968K (ffffffc001c37000 - ffffffc001d29000)
[    4.343797@0] init: init started!
[    4.344925@1] init: init second stage started!
[    4.346243@1] init: waitpid failed: No child processes
[    4.351466@1] init: (Loading properties from /default.prop took 0.00s.)
[    4.359694@1] init: (Parsing /init.environ.rc took 0.00s.)
[    4.363450@1] init: (Parsing /init.usb.rc took 0.00s.)
[    4.369474@1] init: /init.odroidc2.rc: 439: ignored duplicate definition of service 'watchdogd'
[    4.377128@1] init: (Parsing init.odroidc2.usb.rc took 0.00s.)
[    4.382991@1] init: (Parsing init.odroidc2.usb.rc took 0.00s.)
[    4.388553@1] init: init.superuser.rc: 2: ignored duplicate definition of service 'su_daemon'
[    4.397105@1] init: (Parsing init.superuser.rc took 0.01s.)
[    4.402212@1] init: (Parsing init.odroidc2.board.rc took 0.02s.)
[    4.408189@1] init: (Parsing /init.odroidc2.rc took 0.04s.)
[    4.414356@1] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[    4.419877@1] init: (Parsing /init.zygote32.rc took 0.00s.)
[    4.425410@1] init: (Parsing /init.trace.rc took 0.00s.)
[    4.430665@1] init: (Parsing /init.rc took 0.07s.)
[    4.435346@1] init: Starting service 'ueventd'...
[    4.441452@3] ueventd: ueventd started!
[    4.516180@1] mali-utgard d00c0000.mali: set min pp to default 1
[    4.516575@1] mali-utgard d00c0000.mali: set min clk default to 0
[    4.522671@1] mali-utgard d00c0000.mali: max clk set 4
[    4.527697@1] mali-utgard d00c0000.mali: turbo clk set to 5
[    4.533194@1] mali-utgard d00c0000.mali: default clk set to 2
[    4.541041@0] cdev3 set upper to 2
[    4.542260@0] cdev4 set upper to 2
[    4.545653@0] gpu cooling register okay with err=0
[    4.550515@0] gpu core cooling register okay with err=0
[    4.556227@0] Mali: Mali device driver loaded
[    4.653212@0] ueventd: Coldboot took 0.20s.
[    4.663217@0] ttyS0 use xtal 24000000 change 115200 to 115200
[    4.682795@1] file system registered
[    4.682887@3] watchdogd: watchdogd started (interval 10, margin 20)!
[    4.683082@1] init: property 'sys.usb.state' doesn't exist while expanding '${sys.usb.state}'
[    4.683093@1] init: cannot expand '${sys.usb.state}' while assigning to 'sys.usb.config'
[    4.683345@1] ffs_data_put(): freeing
[    4.683397@1] init: property 'sys.usb.state' doesn't exist while expanding '${sys.usb.state}'
[    4.683406@1] init: cannot expand '${sys.usb.state}' while assigning to 'sys.usb.config'
[    4.724293@2] fs_mgr: __mount(source=/dev/block/mmcblk0p2,target=/system,type=ext4)=0
[    4.731790@2] EXT4-fs (mmcblk0p4): Ignoring removed nomblk_io_submit option
[    4.745335@2] EXT4-fs (mmcblk0p4): 2 orphan inodes deleted
[    4.745361@2] EXT4-fs (mmcblk0p4): recovery complete
[    4.753408@2] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    4.760775@2] fs_mgr: check_fs(): mount(/dev/block/mmcblk0p4,/data,ext4)=0: Success
[    4.816311@1] fs_mgr: check_fs(): unmount(/data) succeeded
[    4.816402@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p4
[    4.865640@1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    4.865640@1] 
[    4.866371@1] e2fsck: /dev/block/mmcblk0p4: clean, 4042/335872 files, 200638/1343488 blocks
[    4.866371@1] 
[    4.879669@1] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[    4.884493@1] fs_mgr: __mount(source=/dev/block/mmcblk0p4,target=/data,type=ext4)=0
[    4.892469@1] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[    4.901371@1] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    4.909605@1] fs_mgr: check_fs(): mount(/dev/block/mmcblk0p3,/cache,ext4)=0: Success
[    4.976139@1] fs_mgr: check_fs(): unmount(/cache) succeeded
[    4.976186@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p3
[    4.999919@1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    4.999919@1] 
[    5.000649@1] e2fsck: cache: clean, 19/65536 files, 83912/262144 blocks
[    5.000649@1] 
[    5.011705@1] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    5.017090@1] fs_mgr: __mount(source=/dev/block/mmcblk0p3,target=/cache,type=ext4)=0
[    5.025588@1] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.034720@1] fs_mgr: __mount(source=/dev/block/mmcblk0p1,target=/internal,type=vfat)=0
[    5.036468@0] switch_vpu_mem_pd: viu_vd1 OFF
[    5.036472@0] switch_vpu_mem_pd: afbc_dec OFF
[    5.036474@0] switch_vpu_mem_pd: di_post OFF
[    5.036477@0] switch_vpu_mem_pd: viu_vd2 OFF
[    5.066442@3] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.079009@2] init: /recovery not specified in fstab
[    5.088462@2] init: Failed to reload policy
[    5.093418@0] logd.auditd: start
[    5.093480@0] logd.klogd: 5077918000
[    5.157575@2] binder: 2866:2866 transaction failed 29189, size 0-0
[    5.160995@0] logd.daemon: reinit
[    5.169606@3] usbcore: registered new interface driver btusb
[    5.176510@3] vfm_map_store:rm default
[    5.176954@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    5.181553@3] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
[    5.191211@3] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[    5.203494@3] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
[    5.213746@3] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
[    5.226460@3] init: property_set("ro.radio.noril", "true" failed
[    5.232166@3] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
[    5.241558@3] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[    5.254005@3] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
[    5.263799@3] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
[    5.277683@0] ttyS0 use xtal 24000000 change 115200 to 115200
[    5.278509@3] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[    5.285339@3] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[    5.293370@3] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
[    5.304163@3] android_usb: already disabled
[    5.304850@3] mtp_bind_config
[    5.308039@3] WARN::ep_dequeue:412: bogus device state
[    5.308039@3] 
[    5.314516@3] mtp_bind_config
[    5.341938@1] remote: cur_mode = 0
[    5.341966@1] remote: [0x580] = 0x1f40190
[    5.343689@1] remote: [0x584] = 0x12c00c8
[    5.365778@1] remote: [0x588] = 0x960050
[    5.365856@1] remote: [0x58c] = 0x480028
[    5.369744@1] remote: [0x590] = 0x70fa0013
[    5.373794@1] remote: [0x598] = 0x8616800
[    5.390369@1] remote: [0x59c] = 0x9f00
[    5.390391@1] remote: [0x5a0] = 0x0
[    5.393728@1] remote: [0x5a4] = 0x0
[    5.401152@1] remote: [0x5a8] = 0x0
[    5.401169@1] remote: set_remote_mode[72]
[    5.406633@1] remote: do nothing
[    5.436098@0] fb: osd[0] canvas.idx =0x40
[    5.436100@0] fb: osd[0] canvas.addr=0x78000000
[    5.436103@0] fb: osd[0] canvas.width=5120
[    5.436104@0] fb: osd[0] canvas.height=2400
[    5.467296@0] fb: osd[1] canvas.idx =0x43
[    5.467304@0] fb: osd[1] canvas.addr=0x7e000000
[    5.467306@0] fb: osd[1] canvas.width=128
[    5.467307@0] fb: osd[1] canvas.height=32
[    5.498405@0] vout_serve: vmode set to custombuilt
[    5.499389@0] vout_serve: don't set the same mode as current.
[    5.706029@3] fb: osd[0] enable: 0 (systemcontrol)
[    5.765796@3] fb: osd[0] enable: 1 (systemcontrol)
[    5.782256@3] vout_serve: osd0=> x:0,y:0,w:1280,h:800
[    5.782256@3] osd1=> x:0,y:0,w:18,h:18
[    5.793919@3] fb: current vmode=custombuilt
[    5.798748@3] fb: osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
[    5.800417@3] fb: osd[1].scaledata: 1280 1280 800 800
[    5.808425@3] fb: osd[1].pandata: 0 31 0 31
[    7.997821@2] warning: `main' uses 32-bit capabilities (legacy support in use)
[    8.963811@1] request_suspend_state: wakeup (3->0) at 8948255000 (1970-01-01 00:00:08.948254000 UTC)
[    8.967280@1] request_suspend_state,164,old_sleep=0,new_state=0
[   11.111744@0] tv_vout: vout [tv_set_vframe_rate_end_hint] return mode = 67, policy = 1!
[   13.999234@3] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[   14.000912@3] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[   14.006525@3] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[   14.012115@3] lowmemorykiller: oom_adj 4 => oom_score_adj 235
[   14.017864@0] lowmemorykiller: oom_adj 6 => oom_score_adj 352
[   14.023523@0] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[   14.029221@0] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[   14.722939@2] acc_open
[   14.722974@2] acc_release
[   15.776349@3] avc open
[   15.776381@3] amvenc_avc  check CMA pool sucess, max instance: 1.
[   15.779178@3] allocating phys 0x61300000, size 18432k, wq:ffffffc057e11000.
[   15.786419@3] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc057e11000.
[   15.796295@3] avc release, wq:ffffffc057e11000
[   15.800431@3] remove  encode_work_queue ffffffc057e11000 sucess, _destroy_encode_work_queue line 3563.
[   15.812404@3] ionvideo open
[   16.005626@3] ionvideo_stop_generating!!!!
[   16.005687@3] ionvideo release
[   16.009196@3] ionvideo open
[   16.205642@3] ionvideo_stop_generating!!!!
[   16.205703@3] ionvideo release
[   16.208966@3] ionvideo open
[   16.405642@3] ionvideo_stop_generating!!!!
[   16.405710@3] ionvideo release
[   16.409011@3] ionvideo open
[   16.605651@3] ionvideo_stop_generating!!!!
[   16.605704@3] ionvideo release
[   16.608966@3] ionvideo open
[   16.805596@3] ionvideo_stop_generating!!!!
[   16.805644@3] ionvideo release
[   16.812222@3] ionvideo open
[   17.005634@3] ionvideo_stop_generating!!!!
[   17.005687@3] ionvideo release
[   17.019877@3] ionvideo open
[   17.215617@3] ionvideo_stop_generating!!!!
[   17.215673@3] ionvideo release
[   17.234750@3] ionvideo open
[   17.425630@1] ionvideo_stop_generating!!!!
[   17.425683@1] ionvideo release
[   17.429596@1] ionvideo open
[   17.630612@1] ionvideo_stop_generating!!!!
[   17.630674@1] ionvideo release
[   17.638002@0] ionvideo open
[   17.835654@0] ionvideo_stop_generating!!!!
[   17.835713@0] ionvideo release
[   17.840355@0] ionvideo open
[   18.035608@0] ionvideo_stop_generating!!!!
[   18.035690@0] ionvideo release
[   18.453595@1] avc open
[   18.453636@1] allocating phys 0x61300000, size 18432k, wq:ffffffc05ba93c00.
[   18.457349@1] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc05ba93c00.
[   18.468470@1] avc release, wq:ffffffc05ba93c00
[   18.475489@1] remove  encode_work_queue ffffffc05ba93c00 sucess, _destroy_encode_work_queue line 3563.
[   18.594844@1] avc open
[   18.594897@1] allocating phys 0x61300000, size 18432k, wq:ffffffc05ba93800.
[   18.598566@1] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc05ba93800.
[   18.610338@1] avc release, wq:ffffffc05ba93800
[   18.612815@1] remove  encode_work_queue ffffffc05ba93800 sucess, _destroy_encode_work_queue line 3563.
[   18.697970@3] avc open
[   18.698014@3] allocating phys 0x61300000, size 18432k, wq:ffffffc03e7ef000.
[   18.701736@3] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc03e7ef000.
[   18.711845@3] avc release, wq:ffffffc03e7ef000
[   18.716473@3] remove  encode_work_queue ffffffc03e7ef000 sucess, _destroy_encode_work_queue line 3563.
[   18.846201@0] avc open
[   18.846248@0] allocating phys 0x61300000, size 18432k, wq:ffffffc03e7cc600.
[   18.851301@0] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc03e7cc600.
[   18.860840@0] avc release, wq:ffffffc03e7cc600
[   18.864370@0] remove  encode_work_queue ffffffc03e7cc600 sucess, _destroy_encode_work_queue line 3563.
[   18.958968@3] avc open
[   18.959010@3] allocating phys 0x61300000, size 18432k, wq:ffffffc03e7ee600.
[   18.962622@3] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc03e7ee600.
[   18.973003@3] avc release, wq:ffffffc03e7ee600
[   18.977034@3] remove  encode_work_queue ffffffc03e7ee600 sucess, _destroy_encode_work_queue line 3563.
[   19.064421@2] avc open
[   19.064484@2] allocating phys 0x61300000, size 18432k, wq:ffffffc057e01000.
[   19.068751@2] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc057e01000.
[   19.080464@2] avc release, wq:ffffffc057e01000
[   19.082407@2] remove  encode_work_queue ffffffc057e01000 sucess, _destroy_encode_work_queue line 3563.
[   19.155906@0] libphy: stmmac-0:00 - Link is Up - 1000/Full
[   19.265081@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   19.265186@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   19.272486@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   19.282472@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   19.282686@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   19.288501@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   19.294035@1] rtc-pcf8563 1-0051: pcf8563_set_datetime: err=-11 addr=02, data=17
[   19.301561@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   19.307347@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   19.308911@3] alarm lock suspend
[   19.316724@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   19.322360@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   19.327413@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   19.333111@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   19.339030@1] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[   20.582767@0] .gms.persistent[3626]: syscall 384
[   20.582801@0] Code: e1a01002 e1a02003 e89c0078 ef000000 (e8bd00f0) 
[   20.588009@0] CPU: 0 PID: 3626 Comm: .gms.persistent Tainted: G           O 3.14.29-gb08bf9f #1
[   20.596659@0] task: ffffffc041c2d000 ti: ffffffc05b3d8000 task.ti: ffffffc05b3d8000
[   20.604211@0] PC is at 0xf7483ba0
[   20.607475@0] LR is at 0xe03a18ef
[   20.610755@0] pc : [<00000000f7483ba0>] lr : [<00000000e03a18ef>] pstate: 20070010
[   20.618455@0] sp : 00000000ffcbf2f8
[   20.621719@0] x12: 00000000ffcbf308 
[   20.625231@0] x11: 00000000f5536500 x10: 0000000000000000 
[   20.630664@0] x9 : 0000000000000001 x8 : 00000000e03a1761 
[   20.636098@0] x7 : 0000000000000180 x6 : 0000000000000000 
[   20.641528@0] x5 : 00000000e03b7f8c x4 : 0000000000000000 
[   20.646971@0] x3 : 0000000000000004 x2 : 0000000000000001 
[   20.652405@0] x1 : 0000000000000001 x0 : 00000000ffcbf323 
[   20.657833@0] 
[   23.301062@3] fb: osd[1] canvas.idx =0x43
[   23.301065@3] fb: osd[1] canvas.addr=0x7e000000
[   23.301068@3] fb: osd[1] canvas.width=128
[   23.301069@3] fb: osd[1] canvas.height=28
[   23.377861@3] gle.android.gms[3964]: syscall 384
[   23.377901@3] Code: e1a01002 e1a02003 e89c0078 ef000000 (e8bd00f0) 
[   23.383187@3] CPU: 3 PID: 3964 Comm: gle.android.gms Tainted: G           O 3.14.29-gb08bf9f #1
[   23.391772@3] task: ffffffc03a0c1000 ti: ffffffc05ad0c000 task.ti: ffffffc05ad0c000
[   23.399469@3] PC is at 0xf7483ba0
[   23.402702@3] LR is at 0xe03a18ef
[   23.406158@3] pc : [<00000000f7483ba0>] lr : [<00000000e03a18ef>] pstate: 20070010
[   23.413384@3] sp : 00000000ffcbf2f8
[   23.418639@3] x12: 00000000ffcbf308 
[   23.420494@3] x11: 00000000f5536500 x10: 0000000000000000 
[   23.425749@3] x9 : 0000000000000001 x8 : 00000000e03a1761 
[   23.431466@3] x7 : 0000000000000180 x6 : 0000000000000000 
[   23.437215@3] x5 : 00000000e03b7f8c x4 : 0000000000000000 
[   23.442057@3] x3 : 0000000000000004 x2 : 0000000000000001 
[   23.447484@3] x1 : 0000000000000001 x0 : 00000000ffcbf323 
[   23.452928@3] 
[   24.376565@3] alarm lock suspend
[   30.050862@3] fb: osd[1] canvas.idx =0x43
[   30.050866@3] fb: osd[1] canvas.addr=0x7e000000
[   30.050869@3] fb: osd[1] canvas.width=128
[   30.050870@3] fb: osd[1] canvas.height=25
[   31.017559@3] fb: osd[1] canvas.idx =0x43
[   31.017562@3] fb: osd[1] canvas.addr=0x7e000000
[   31.017566@3] fb: osd[1] canvas.width=128
[   31.017568@3] fb: osd[1] canvas.height=28
[   34.586005@3] fb: osd[1] canvas.idx =0x43
[   34.586008@3] fb: osd[1] canvas.addr=0x7e000000
[   34.586011@3] fb: osd[1] canvas.width=128
[   34.586013@3] fb: osd[1] canvas.height=25
[   34.652047@0] fb: osd[1] canvas.idx =0x43
[   34.652050@0] fb: osd[1] canvas.addr=0x7e000000
[   34.652054@0] fb: osd[1] canvas.width=128
[   34.652055@0] fb: osd[1] canvas.height=28
[   34.774557@0] alarm lock suspend
[   36.228576@0] binder: 3626: binder_alloc_buf size 1056768 failed, no address space
[   36.230551@0] binder: 3964:4696 transaction failed 29201, size 1056768-0
[   40.688040@2] id.gms.unstable[4787]: syscall 384
[   40.688080@2] Code: e1a01002 e1a02003 e89c0078 ef000000 (e8bd00f0) 
[   40.693869@2] CPU: 2 PID: 4787 Comm: id.gms.unstable Tainted: G           O 3.14.29-gb08bf9f #1
[   40.702647@2] task: ffffffc0265c0000 ti: ffffffc02663c000 task.ti: ffffffc02663c000
[   40.709944@2] PC is at 0xf7483ba0
[   40.712828@2] LR is at 0xe03a18ef
[   40.716187@2] pc : [<00000000f7483ba0>] lr : [<00000000e03a18ef>] pstate: 20070010
[   40.723743@2] sp : 00000000ffcbf2f8
[   40.727148@2] x12: 00000000ffcbf308 
[   40.730504@2] x11: 00000000f5536500 x10: 0000000000000000 
[   40.735936@2] x9 : 0000000000000001 x8 : 00000000e03a1761 
[   40.741367@2] x7 : 0000000000000180 x6 : 0000000000000000 
[   40.746802@2] x5 : 00000000e03b7f8c x4 : 0000000000000000 
[   40.750171@2] x3 : 0000000000000004 x2 : 0000000000000001 
[   40.750174@2] x1 : 0000000000000001 x0 : 00000000ffcbf323 
[   40.750178@2] 
[   42.468457@2] fb: osd[1] canvas.idx =0x43
[   42.468459@2] fb: osd[1] canvas.addr=0x7e000000
[   42.468463@2] fb: osd[1] canvas.width=128
[   42.468464@2] fb: osd[1] canvas.height=25
[   42.584022@3] fb: osd[1] canvas.idx =0x43
[   42.584026@3] fb: osd[1] canvas.addr=0x7e000000
[   42.584028@3] fb: osd[1] canvas.width=128
[   42.584030@3] fb: osd[1] canvas.height=28
[   43.322786@2] binder: 3626:3650 refcount change on invalid ref 145
[   43.545656@3] binder: 3626:4891 refcount change on invalid ref 145
[   43.546200@3] binder: 3626:4891 refcount change on invalid ref 145
[   43.555304@3] binder: transaction release 43272 bad handle 145
[   47.582121@3] .android.gms.ui[5037]: syscall 384
[   47.582159@3] Code: e1a01002 e1a02003 e89c0078 ef000000 (e8bd00f0) 
[   47.587656@3] CPU: 3 PID: 5037 Comm: .android.gms.ui Tainted: G           O 3.14.29-gb08bf9f #1
[   47.596285@3] task: ffffffc02333d000 ti: ffffffc0233a4000 task.ti: ffffffc0233a4000
[   47.605106@3] PC is at 0xf7483ba0
[   47.606983@3] LR is at 0xe03a18ef
[   47.610083@3] pc : [<00000000f7483ba0>] lr : [<00000000e03a18ef>] pstate: 20070010
[   47.617802@3] sp : 00000000ffcbf2f8
[   47.621071@3] x12: 00000000ffcbf308 
[   47.621080@3] x11: 00000000f5536500 x10: 0000000000000000 
[   47.621083@3] x9 : 0000000000000001 x8 : 00000000e03a1761 
[   47.621086@3] x7 : 0000000000000180 x6 : 0000000000000000 
[   47.621090@3] x5 : 00000000e03b7f8c x4 : 0000000000000000 
[   47.621093@3] x3 : 0000000000000004 x2 : 0000000000000001 
[   47.621097@3] x1 : 0000000000000001 x0 : 00000000ffcbf323 
[   47.621097@3]

User avatar
odroid
Site Admin
Posts: 35301
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 1089 times
Been thanked: 825 times
Contact:

Re: touch screen support - JoyIt Touch Display RB-LCD10-2

Post by odroid »

Your touchscreen driver seems to be loaded well.

Code: Select all

[    3.573003@1] input: eGalax Inc. USB TouchController Pen as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.0/0003:0EEF:0001.0001/input/input0
[    3.573423@1] input: eGalax Inc. USB TouchController as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.0/0003:0EEF:0001.0001/input/input1
[    3.573875@1] hid-multitouch 0003:0EEF:0001.0001: input,hiddev0: USB HID v1.00 Pointer [eGalax Inc. USB TouchController] on usb-dwc2_b-1.1/input0
BTW, did you change the disable_vu7 option in boot.ini file?
Was the touchscreen working with a Windows PC without extra driver installation?

gg_a
Posts: 8
Joined: Sun Jan 05, 2020 8:38 pm
languages_spoken: english
ODROIDs: C2
Has thanked: 0
Been thanked: 0
Contact:

Re: touch screen support - JoyIt Touch Display RB-LCD10-2

Post by gg_a »

Hi,

yes I in the boot.ini setenv disable_vu7 from "false" to "true"...

In this moment I checked the display first time at the win10 - the touch controller was directly found, but it is the same as at the android: the orientation is wrong....

Regards

User avatar
odroid
Site Admin
Posts: 35301
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 1089 times
Been thanked: 825 times
Contact:

Re: touch screen support - JoyIt Touch Display RB-LCD10-2

Post by odroid »

According to your dmesg output, "disable_vu7" flag is not "true".

Code: Select all

[    0.000000@0] Kernel command line: root=/dev/mmcblk0p2 rw init=/init rootwait console=ttyS0,115200 hdmimode=custombuilt modeline=1280,800,69300,49394,60,1280,1328,1360,1403,800,803,809,821,0,0,1 hdmitx=cec0x0 vout=hdmi disablehpd=false logo=osd1,loaded,0x3f800000,1080p60hz androidboot.hardware=odroidc2 androidboot.serialno=HKC213254E00D8ED androidboot.selinux=disabled suspend_hdmiphy=0 led_onoff=on max_freq=1536 maxcpus=4 disable_vu7=false touch_invert_x=false touch_invert_y=false usbmulticam=false gpiopower= backlight_pwm=no ddrclock= test_mt_pid=0000 test_mt_vid=0000

gg_a
Posts: 8
Joined: Sun Jan 05, 2020 8:38 pm
languages_spoken: english
ODROIDs: C2
Has thanked: 0
Been thanked: 0
Contact:

Re: touch screen support - JoyIt Touch Display RB-LCD10-2

Post by gg_a »

Yes, I set it back after testing - I will do it this evening again and check the dmesg Output...

gg_a
Posts: 8
Joined: Sun Jan 05, 2020 8:38 pm
languages_spoken: english
ODROIDs: C2
Has thanked: 0
Been thanked: 0
Contact:

Re: touch screen support - JoyIt Touch Display RB-LCD10-2

Post by gg_a »

Hi,

so switch disable_vu7 to true => nothing changed... :cry:

here the dmesg:

Code: Select all

[    0.000000@0] Initializing cgroup subsys cpu
[    0.000000@0] Initializing cgroup subsys cpuacct
[    0.000000@0] Linux version 3.14.29-gb08bf9f (jenkins@build) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Nov 28 12:51:33 KST 2019
[    0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
[    0.000000@0] secmon: share mem setup
[    0.000000@0] Reserved memory: initialized node linux,secmon, compatible id aml_secmon_memory
[    0.000000@0] __reserved_mem_alloc_size: linux,meson-fb
[    0.000000@0] fb: Reserved memory: created fb at 0x0000000078000000, size 128 MiB
[    0.000000@0] Reserved memory: initialized node linux,meson-fb, compatible id amlogic, fb-memory
[    0.000000@0] __reserved_mem_alloc_size: linux,di
[    0.000000@0] DI reserved memory: created CMA memory pool at 0x0000000076200000, size 30 MiB
[    0.000000@0] Reserved memory: initialized node linux,di, compatible id amlogic, di-mem
[    0.000000@0] __reserved_mem_alloc_size: linux,ion-dev
[    0.000000@0] linux,ion-dev add multi user:ffffffc001dbd6b8
[    0.000000@0] ion_dev mem setup
[    0.000000@0] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
[    0.000000@0] ppmgr share mem setup
[    0.000000@0] linux,ion-dev add multi user:ffffffc001dc6370
[    0.000000@0] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
[    0.000000@0] __reserved_mem_alloc_size: linux,codec_mm_cma
[    0.000000@0] Reserved memory: created CMA memory pool at 0x0000000068400000, size 188 MiB
[    0.000000@0] Reserved memory: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
[    0.000000@0] __reserved_mem_alloc_size: linux,picdec
[    0.000000@0] Reserved memory: created CMA memory pool at 0x0000000065400000, size 48 MiB
[    0.000000@0] Reserved memory: initialized node linux,picdec, compatible id shared-dma-pool
[    0.000000@0] __reserved_mem_alloc_size: linux,codec_mm_reserved
[    0.000000@0] Reserved memory: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
[    0.000000@0] __reserved_mem_alloc_size: linux,jpegenc_cma
[    0.000000@0] Reserved memory: created CMA memory pool at 0x000000005ec00000, size 36 MiB
[    0.000000@0] Reserved memory: initialized node linux,jpegenc_cma, compatible id shared-dma-pool
[    0.000000@0] cma: Reserved 8 MiB at 5e400000
[    0.000000@0] On node 0 totalpages: 486912
[    0.000000@0]   Normal zone: 8568 pages used for memmap
[    0.000000@0]   Normal zone: 0 pages reserved
[    0.000000@0]   Normal zone: 486912 pages, LIFO batch:31
[    0.000000@0] psci: probing function IDs from device-tree
[    0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0741a7000 s19328 r8192 d21632 u49152
[    0.000000@0] pcpu-alloc: s19328 r8192 d21632 u49152 alloc=12*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 478344
[    0.000000@0] Kernel command line: root=/dev/mmcblk0p2 rw init=/init rootwait console=ttyS0,115200 hdmimode=custombuilt modeline=1280,800,69300,49394,60,1280,1328,1360,1403,800,803,809,821,0,0,1 hdmitx=cec0x0 vout=hdmi disablehpd=false logo=osd1,loaded,0x3f800000,1080p60hz androidboot.hardware=odroidc2 androidboot.serialno=HKC213254E00D8ED androidboot.selinux=disabled suspend_hdmiphy=0 led_onoff=on max_freq=1536 maxcpus=4 disable_vu7=true touch_invert_x=false touch_invert_y=false usbmulticam=false gpiopower= backlight_pwm=no ddrclock= test_mt_pid=0000 test_mt_vid=0000
[    0.000000@0] logo: get hdmimode: custombuilt
[    0.000000@0] modeline parsing - 1280
[    0.000000@0] modeline parsing - 800
[    0.000000@0] modeline parsing - 69300
[    0.000000@0] modeline parsing - 49394
[    0.000000@0] modeline parsing - 60
[    0.000000@0] modeline parsing - 1280
[    0.000000@0] modeline parsing - 1328
[    0.000000@0] modeline parsing - 1360
[    0.000000@0] modeline parsing - 1403
[    0.000000@0] modeline parsing - 800
[    0.000000@0] modeline parsing - 803
[    0.000000@0] modeline parsing - 809
[    0.000000@0] modeline parsing - 821
[    0.000000@0] modeline parsing - 0
[    0.000000@0] modeline parsing - 0
[    0.000000@0] modeline parsing - 1
[    0.000000@0] modeline - horpixels 1280
[    0.000000@0] modeline - verpixels 800
[    0.000000@0] modeline - pixel_clock 69300
[    0.000000@0] modeline - hor_freq 49394
[    0.000000@0] modeline - ver_freq 60
[    0.000000@0] modeline - hdisp 1280
[    0.000000@0] modeline - hsyncstart 1328
[    0.000000@0] modeline - hsyncend 1360
[    0.000000@0] modeline - htotal 1403
[    0.000000@0] modeline - vdisp 800
[    0.000000@0] modeline - vsyncstart 803
[    0.000000@0] modeline - vsyncend 809
[    0.000000@0] modeline - vtotal 821
[    0.000000@0] modeline - hsync_polarity 0
[    0.000000@0] modeline - vsync_polarity 0
[    0.000000@0] modeline - progress_mode 1
[    0.000000@0] fmt_para - vic 787
[    0.000000@0] fmt_para - name custombuilt
[    0.000000@0] fmt_para - pixel_repetition_factor 0
[    0.000000@0] fmt_para - progress mode 1
[    0.000000@0] fmt_para - scrambler_en 0
[    0.000000@0] fmt_para - tmds_clk_div40 0
[    0.000000@0] fmt_para - tmds_clk 69300
[    0.000000@0] fmt_para - pixel_freq 69300
[    0.000000@0] fmt_para - h_freq 49394
[    0.000000@0] fmt_para - v_freq 60000
[    0.000000@0] fmt_para - hsync_polarity 0
[    0.000000@0] fmt_para - vsync_polarity 0
[    0.000000@0] fmt_para - h_active 1280
[    0.000000@0] fmt_para - h_total 1403
[    0.000000@0] fmt_para - h_blank 123
[    0.000000@0] fmt_para - h_front 48
[    0.000000@0] fmt_para - h_sync 32
[    0.000000@0] fmt_para - h_back 43
[    0.000000@0] fmt_para - v_active 800
[    0.000000@0] fmt_para - v_total 821
[    0.000000@0] fmt_para - v_blank 21
[    0.000000@0] fmt_para - v_front 3
[    0.000000@0] fmt_para - v_sync 6
[    0.000000@0] fmt_para - v_back 12
[    0.000000@0] logo: osd1
[    0.000000@0] logo: loaded
[    0.000000@0] logo: 0x3f800000
[    0.000000@0] logo: 1080p60hz
[    0.000000@0] dvfs [get_max_freq] - max_freq : 1536000000
[    0.000000@0] gpio_key- gpiopower_setup gpiopower : 0
[    0.000000@0] hid: +test_mt_pid_setup test_mt_pid : 0x0
[    0.000000@0] hid: -test_mt_vid_setup test_mt_vid : 0x0
[    0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000@0] Memory: 1471248K/1947648K available (8775K kernel code, 944K rwdata, 3216K rodata, 970K init, 3291K bss, 476400K reserved)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vmalloc : 0xffffff8000000000 - 0xffffff8040000000   (  1024 MB)
[    0.000000@0]     vmemmap : 0xffffff8040010000 - 0xffffff80421d0000   (    33 MB)
[    0.000000@0]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc078000000   (  1920 MB)
[    0.000000@0]       .init : 0xffffffc001c37000 - 0xffffffc001d29b80   (   971 kB)
[    0.000000@0]       .text : 0xffffffc001080000 - 0xffffffc001c36de4   ( 11996 kB)
[    0.000000@0]       .data : 0xffffffc001d2a000 - 0xffffffc001e16208   (   945 kB)
[    0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000@0] NR_IRQS:64 nr_irqs:64 0
[    0.000005@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
[    0.000023@0] mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000a994
[    0.000069@0] local timer MESON TIMER-G mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000c998
[    0.000090@0] local timer MESON TIMER-H mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000e99c
[    0.000109@0] local timer MESON TIMER-I mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff80000109a0
[    0.000120@0] Switching to timer-based delay loop
[    0.000348@0] Console: colour dummy device 80x25
[    0.000363@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.000370@0] pid_max: default: 32768 minimum: 301
[    0.000436@0] Security Framework initialized
[    0.000449@0] SELinux:  Initializing.
[    0.000489@0] SELinux:  Starting in permissive mode
[    0.000528@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000533@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.002253@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
[    0.002261@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
[    0.002268@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
[    0.002274@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
[    0.003976@0] Initializing cgroup subsys debug
[    0.003984@0] Initializing cgroup subsys freezer
[    0.004006@0] ftrace: allocating 31289 entries in 123 pages
[    0.031668@0] /cpus/cpu@0: Missing clock-frequency property
[    0.031686@0] /cpus/cpu@1: Missing clock-frequency property
[    0.031693@0] /cpus/cpu@2: Missing clock-frequency property
[    0.031699@0] /cpus/cpu@3: Missing clock-frequency property
[    0.031707@0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[    0.071647@0] Meson chip version = RevC (1F:C - 0:0)
[    0.090813@1] CPU1: Booted secondary processor
[    0.110776@2] CPU2: Booted secondary processor
[    0.130771@3] CPU3: Booted secondary processor
[    0.130823@0] Brought up 4 CPUs
[    0.130834@0] SMP: Total of 4 processors activated.
[    0.131343@0] devtmpfs: initialized
[    0.144800@0] pinctrl core: initialized pinctrl subsystem
[    0.145372@0] regulator-dummy: no parameters
[    0.145918@0] NET: Registered protocol family 16
[    0.147794@0] register canvas platform driver
[    0.147862@0] register rdma platform driver
[    0.148780@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001d32000
[    0.148808@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.149355@0] DMA: preallocated 256 KiB pool for atomic allocations
[    0.150608@0] software IO TLB [mem 0x5a800000-0x5ac00000] (4MB) mapped at [ffffffc05a800000-ffffffc05abfffff]
[    0.150613@0] Serial: AMBA PL011 UART driver
[    0.150873@0] hdmitx: system: amhdmitx_init
[    0.150877@0] hdmitx: system: Ver: 2014May6
[    0.150944@0] aml_i2c version: 20140813
[    0.151021@0] tv_vout: tv_init_module
[    0.151030@0] tv_vout: major number 254 for disp
[    0.151034@0] vout_notify: vout_register_server
[    0.151037@0] tv_vout: register tv module server ok
[    0.151105@0] codec_mm:codec_mm_module_init
[    0.151265@0] gxbb clk HIU base is 0xffffff800005a000
[    0.151269@0] gxbb clk ao base is 0xffffff800005c000
[    0.151302@0] register mpll_clk_out0 success done
[    0.151308@0] register mpll_clk_out1 success done
[    0.151314@0] register mpll_clk_out2 success done
[    0.151477@0] register sys pll success done
[    0.151511@0] clkrate [ xtal 	] : 24000000Hz
[    0.151516@0] clkrate [ 32Khz 	] : 32000Hz
[    0.151520@0] clkrate [ clk81 	] : 166666666Hz
[    0.151524@0] clkrate [ fixed_pll 	] : 2000000000Hz
[    0.151528@0] clkrate [ fclk_div2 	] : 1000000000Hz
[    0.151532@0] clkrate [ fclk_div3 	] : 666666000Hz
[    0.151536@0] clkrate [ fclk_div4 	] : 500000000Hz
[    0.151539@0] clkrate [ fclk_div5 	] : 400000000Hz
[    0.151543@0] clkrate [ fclk_div7 	] : 285714000Hz
[    0.151566@0] gxbb clock initialization complete
[    0.151659@0] msr_clk_reg0=ffffff800005e75c,msr_clk_reg2=ffffff800006a764
[    0.153016@0] amlogic iomap probe done
[    0.153455@0] Init pinux probe!
[    0.154313@0] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
[    0.154889@0] aml-i2c c1108500.i2c: add adapter aml_i2c_adap1(ffffffc05ba310e0)
[    0.155178@0] aml-i2c c11087c0.i2c: add adapter aml_i2c_adap2(ffffffc05ba318e0)
[    0.155378@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
[    0.155389@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
[    0.155497@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
[    0.155508@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
[    0.155716@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000
[    0.156710@0] codec_mm has 2 memory regions
[    0.156724@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_cma ok
[    0.156732@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_reserved ok
[    0.156798@0] codec_mm has 2 memory regions
[    0.156806@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_cma ok
[    0.156814@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_reserved ok
[    0.158046@0] VPU driver version: v01
[    0.158053@0] vpu driver detect cpu type: gxbaby
[    0.158067@0] load vpu_clk in dts: 666667000Hz(7)
[    0.158131@0] vpu_probe OK
[    0.158451@0] hdmitx: system: amhdmitx_probe
[    0.158799@0] hdmitx hpd irq = 89
[    0.159091@0] hdmitx20: Mapped PHY: 0xc0800000
[    0.159098@0] hdmitx20: Mapped PHY: 0xc1104400
[    0.159115@0] hdmitx20: Mapped PHY: 0xc8100000
[    0.159119@0] hdmitx20: Mapped PHY: 0xc8834000
[    0.159124@0] hdmitx20: Mapped PHY: 0xc883a000
[    0.159128@0] hdmitx20: Mapped PHY: 0xc883c000
[    0.159136@0] hdmitx20: Mapped PHY: 0xd0100000
[    0.159142@0] hdmitx20: Mapped PHY: 0xda83a000
[    0.159153@0] hdmitx: alread display in uboot 0x10
[    0.159174@0] avmute set to 1
[    0.159549@0] canvas_probe reg=00000000c8838000,size=400
[    0.159565@0] canvas maped reg_base =ffffff80000d2000
[    0.162778@0] rdma_probe
[    0.166117@0] hdmitx: system: irq 80000002
[    0.229580@0] bio: create slab <bio-0> at 0
[    0.230331@0] SCSI subsystem initialized
[    0.230754@0] usbcore: registered new interface driver usbfs
[    0.230832@0] usbcore: registered new interface driver hub
[    0.230935@0] usbcore: registered new device driver usb
[    0.231177@0] Linux video capture interface: v2.00
[    0.231345@0] pps_core: LinuxPPS API ver. 1 registered
[    0.231349@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.231409@0] PTP clock support registered
[    0.231922@0] logo: logo_init
[    0.231935@0] tv_vout: tv_set_current_vmode[698]fps_target_mode=65
[    0.231941@0] tv_vout: mode is 65,sync_duration_den=1,sync_duration_num=60
[    0.231949@0] switch_vpu_mem_pd: vencp ON
[    0.231955@0] tv_vout: TV mode custombuilt selected.
[    0.231959@0] tv_vout: already display in uboot
[    0.231963@0] tv_vout: new mode =custombuilt set ok
[    0.231966@0] vout_serve: vinfo mode is: custombuilt
[    0.231971@0] logo: set vmode: custombuilt
[    0.231977@0] switch_vpu_mem_pd: viu_osd1 ON
[    0.231981@0] switch_vpu_mem_pd: viu_osd2 ON
[    0.231985@0] switch_vpu_mem_pd: viu_osd_scale ON
[    0.232205@0] osd_rdma: osd_rdma_init: rmda_table p=0x5e441000,op=0x5e441000 , v=0xffffff80000d7000
[    0.232316@0] Advanced Linux Sound Architecture Driver Initialized.
[    0.232806@0] NetLabel: Initializing
[    0.232810@0] NetLabel:  domain hash size = 128
[    0.232814@0] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.232846@0] NetLabel:  unlabeled traffic allowed by default
[    0.234034@0] Switched to clocksource Timer-E
[    0.269780@0] NET: Registered protocol family 2
[    0.270231@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.270341@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.270548@0] TCP: Hash tables configured (established 16384 bind 16384)
[    0.270615@0] TCP: reno registered
[    0.270623@0] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.270658@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.270813@0] NET: Registered protocol family 1
[    0.270979@0] RPC: Registered named UNIX socket transport module.
[    0.270983@0] RPC: Registered udp transport module.
[    0.270987@0] RPC: Registered tcp transport module.
[    0.270990@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.273199@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.273252@0] audit: initializing netlink subsys (disabled)
[    0.273285@0] audit: type=2000 audit(0.250:1): initialized
[    0.273882@0] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.279571@0] VFS: Disk quotas dquot_6.5.2
[    0.279763@0] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.283338@0] NFS: Registering the id_resolver key type
[    0.283373@0] Key type id_resolver registered
[    0.283377@0] Key type id_legacy registered
[    0.283397@0] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.284007@0] fuse init (API version 7.22)
[    0.284544@0] msgmni has been set to 3433
[    0.284759@0] SELinux:  Registering netfilter hooks
[    0.285873@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.285882@0] io scheduler noop registered
[    0.285886@0] io scheduler deadline registered
[    0.286022@0] io scheduler cfq registered (default)
[    0.339901@0] meson-rng c8834000.rng: hwrng registered
[    0.342714@0] loop: module loaded
[    0.343178@0] zram: Created 1 device(s) ...
[    0.343872@0] mtdoops: mtd device (mtddev=name/number) must be supplied
[    0.344361@0] tun: Universal TUN/TAP device driver, 1.6
[    0.344366@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.348476@0] libphy: stmmac: probed
[    0.348487@0] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    0.348492@0] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[    0.348812@0] PPP generic driver version 2.4.2
[    0.349015@0] PPP BSD Compression module registered
[    0.349020@0] PPP Deflate Compression module registered
[    0.349032@0] PPP MPPE Compression module registered
[    0.349036@0] NET: Registered protocol family 24
[    0.349153@0] usbcore: registered new interface driver asix
[    0.349256@0] usbcore: registered new interface driver ax88179_178a
[    0.349333@0] usbcore: registered new interface driver cdc_ether
[    0.349406@0] usbcore: registered new interface driver net1080
[    0.349484@0] usbcore: registered new interface driver cdc_subset
[    0.349558@0] usbcore: registered new interface driver zaurus
[    0.349656@0] usbcore: registered new interface driver cdc_ncm
[    0.349863@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.349868@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[    0.350001@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.350101@0] usbcore: registered new interface driver cdc_acm
[    0.350105@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.350191@0] usbcore: registered new interface driver usb-storage
[    0.350367@0] usbcore: registered new interface driver usbserial
[    0.350920@0] mousedev: PS/2 mouse device common for all mice
[    0.351393@0] usbcore: registered new interface driver xpad
[    0.351475@0] usbcore: registered new interface driver dwav_usb_mt
[    0.351632@0] rtc-pcf8563 1-0051: chip found, driver version 0.4.3
[    0.351731@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    0.351737@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    0.351810@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    0.351815@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    0.351888@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    0.351893@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    0.351899@0] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[    0.352043@0] rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0
[    0.352176@0] i2c /dev entries driver
[    0.352550@0] usbcore: registered new interface driver uvcvideo
[    0.352555@0] USB Video Class driver (1.1.1)
[    0.352558@0] gspca_main: v2.14.0 registered
[    0.353193@0] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.353831@0] ledtrig-cpu: registered to indicate activity on CPUs
[    0.354692@0] usbcore: registered new interface driver usbhid
[    0.354698@0] usbhid: USB HID core driver
[    0.355022@0] ashmem: initialized
[    0.355173@0] logger: created 256K log 'log_main'
[    0.355312@0] logger: created 256K log 'log_events'
[    0.355447@0] logger: created 256K log 'log_radio'
[    0.355595@0] logger: created 256K log 'log_system'
[    0.356065@0] ==uart0 reg addr = ffffff800024e4c0
[    0.356087@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[    0.356099@0] ttyS0 use xtal 24000000 change 0 to 115200
[    0.505176@0] hdmitx: plugin
[    0.634000@0] 00ffffffffffff00631800000000000006160103800000000ad7a5a2594a9624
[    0.634000@0] 145054a3080081c00101010101010101010101010101121b007b502015303020
[    0.634000@0] 360005a3100000180e1f008051001e304080370020560000001c000000fd0032
[    0.634000@0] 4c1e5010000a202020202020000000fc004141410a20202020202020200a0195
[    0.634000@0] 
[    0.634000@0] 
[    0.634042@0] 020322715090050403070206011f141312161115202309070768030c001000b8
[    0.634042@0] 2dc0011d007251d01e206e28550000000000001e8c0ad08a20e02d10103e9600
[    0.634042@0] 000000000018011d80d0721c1620102c258000000000009e011d00bc52d01e20
[    0.634042@0] b8285540c48e2100001e8c0ad090204031200c405500000000000018000000e0
[    0.634042@0] 
[    0.634042@0] 
[    0.634046@0] EDID Parser:
[    0.634111@0] hdmitx: edid: find IEEEOUT
[    0.634143@0] 
[    0.634152@0] hdmitx: video: get current mode: custombuilt
[    0.634180@0] hdmitx: system: already init VIC = 0  Now VIC = 787
[    0.634186@0] hdmitx: rx no SCDC present indicator
[    0.636193@0] hdmitx: ddc rd8b error 0x54 0x01
[    0.638203@0] hdmirx version is 1.4 or below
[    0.638205@0] hdmitx: system: set pll
[    0.638206@0] hdmitx: system: param->VIC:787
[    0.648285@0] hdmitx: set clk of VIC = 787 done
[    0.648311@0] hdmitx_set_hw[4552] set VIC = 787
[    0.776041@0] hdmitx: system: phy setting done
[    0.776055@0] hdmitx: system: irq 80000001
[    0.779109@0] Start = 0x10000100   End = 0x100001ff
[    0.779116@0] [0x10000104]: 0x00000001
[    0.779232@0] [0x10000180]: 0x000000ff
[    0.779235@0] [0x10000181]: 0x000000ff
[    0.779237@0] [0x10000182]: 0x00000003
[    0.779239@0] [0x10000183]: 0x00000007
[    0.779241@0] [0x10000184]: 0x0000003f
[    0.779244@0] [0x10000185]: 0x00000002
[    0.779247@0] [0x10000187]: 0x000000ff
[    0.779249@0] [0x10000188]: 0x00000003
[    0.805048@0] Sink is HDMI device
[    0.805053@0] Source reading EDID
[    0.834041@0] hdmtix: set audio
[    0.834048@0] hdmitx tx_aud_src = 0
[    0.834073@0] hdmitx aud_n_para = 24576
[    0.834089@0] hdmitx set channel status
[    0.834142@0] hdmtix: set audio
[    0.834148@0] hdmitx tx_aud_src = 0
[    0.834171@0] hdmitx aud_n_para = 24576
[    0.834187@0] hdmitx set channel status
[    2.349716@1] console [ttyS0] enabled
[    2.353694@0] ==uart1 reg addr = ffffff80002504c0
[    2.358018@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    2.367687@0] enter  cpufreq
[    2.370166@0] probe  cpufreq okay
[    2.373538@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000
[    2.381210@0] dwc_otg c9100000.dwc2_b: dwc_otg_driver_probe(ffffffc05bb1ee00)
[    2.381268@0] dwc_otg_driver_probe : g_dwc_power_reset enable
[    2.485994@0] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
[    2.489030@0] dwc_otg c9100000.dwc2_b: base=0xffffff8001680000
[    2.489036@0] dwc_otg c9100000.dwc2_b: dwc_otg_device=0xffffffc05bbec600
[    2.491659@0] dwc_otg: Core Release: 3.10a
[    2.493077@0] dwc_otg: Setting default values for core params
[    2.498788@0] dwc_otg: curmode: 1, host_only: 1
[    2.503267@0] dwc_otg c9100000.dwc2_b: DMA config: BURST_DEFAULT
[    2.505507@0] dwc_otg: Using Buffer DMA mode
[    2.507480@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.512741@0] dwc_otg: Working on port type = HOST
[    2.517655@0] dwc_otg dwc2_b: DWC OTG Controller
[    2.522068@0] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
[    2.528979@0] dwc_otg dwc2_b: irq 63, io mem 0x00000000
[    2.534142@0] dwc_otg: -------hcd->flags.d32 = 0
[    2.538716@0] dwc_otg: Init: Port Power? op_state=1
[    2.543531@0] dwc_otg: Init1: Power Port (0)
[    2.548329@0] hub 1-0:1.0: USB hub found
[    2.551660@0] hub 1-0:1.0: 1 port detected
[    2.555841@0] dwc_otg c9000000.dwc2_a: dwc_otg_driver_probe(ffffffc05bb1f600)
[    2.555879@0] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
[    2.564334@0] dwc_otg c9000000.dwc2_a: base=0xffffff8001700000
[    2.564340@0] dwc_otg c9000000.dwc2_a: dwc_otg_device=0xffffffc05bbe9b40
[    2.576923@0] dwc_otg: Core Release: 3.10a
[    2.576942@0] dwc_otg: Setting default values for core params
[    2.581084@0] dwc_otg: curmode: 1, host_only: 0
[    2.587587@0] dwc_otg c9000000.dwc2_a: DMA config: BURST_DEFAULT
[    2.589825@0] dwc_otg: Using Buffer DMA mode
[    2.589843@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.595056@0] dwc_otg: Working on port type = OTG
[    2.599709@0] dwc_otg: Current port type: SLAVE
[    2.604293@0] dwc_otg dwc2_a: DWC OTG Controller
[    2.608774@0] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
[    2.615684@0] dwc_otg dwc2_a: irq 62, io mem 0x00000000
[    2.621304@0] hub 2-0:1.0: USB hub found
[    2.624740@0] hub 2-0:1.0: 1 port detected
[    2.628879@0] dwc_otg: Dedicated Tx FIFOs mode
[    2.633409@0] dwc_otg: using timer detectid change, ffffffc059f19800
[    2.639925@0] secmon has 1 memory regions
[    2.643455@0] secmon: share in base: 0xffffff800025e000, share out base: 0xffffff8000272000
[    2.651735@0] secmon secmon.3: assigned reserved memory node linux,secmon ok
[    2.658756@0] secmon: probe done
[    2.662061@0] storage: storage in base: 0xffffff8001780000
[    2.667338@0] storage: storage out base: 0xffffff8001800000
[    2.672846@0] storage: storage block base: 0xffffff8001880000
[    2.678544@0] storage: probe done!
[    2.682008@0] Error: Driver 'RTL8211F Gigabit Ethernet' is already registered, aborting...
[    2.690107@0] libphy: RTL8211F Gigabit Ethernet: Error -16 in registering driver
[    2.697700@0] aml_sd_emmc_probe: line 2954
[    2.701486@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[    2.711064@0] aml_sd_emmc_reg_init 677
[    2.714661@0] pdata->caps 60007
[    2.717701@0] pdata->caps2 0
[    2.720543@0] get property:                ocr_avail, value:0x00200080
[    2.727058@0] get property:                    f_min, value:0x00061a80
[    2.733484@0] get property:                    f_max, value:0x0510ff40
[    2.739966@0] get property:             max_req_size, value:0x00020000
[    2.746426@0] get property:                   irq_in, value:0x00000003
[    2.752890@0] get property:                  irq_out, value:0x00000005
[    2.759376@0] get property:              power_level, value:0x00000001
[    2.759430@2] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[    2.771884@0] get property:                  gpio_cd, str:
[    2.777305@0] get property:               gpio_power, str:
[    2.782732@0] get property:                  pinname, str:sd
[    2.788343@0] get property:                 jtag_pin, str:
[    2.793769@0] get property:                card_type, value:0x00000005
[    2.800249@0] get property:                gpio_dat3, str:
[    2.805684@0] get property:               gpio_volsw, str:
[    2.865198@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.865400@0] aml_sd_emmc_probe: line 2954
[    2.885142@2] [aml_is_card_insert][0;40;33m card OUT
[    2.885142@2] [0m
[    2.885184@2] [aml_is_card_insert][0;40;33m card OUT
[    2.885184@2] [0m<6>[    2.904280@0] aml_sd_emmc_reg_init 677
[    2.904397@0] pdata->caps 80000547
[    2.905762@0] pdata->caps2 a1
[    2.908689@0] get property:                ocr_avail, value:0x00200080
[    2.915170@0] get property:                    f_min, value:0x00061a80
[    2.921626@0] get property:                    f_max, value:0x0bebc200
[    2.928102@0] get property:             max_req_size, value:0x00020000
[    2.934580@0] get property:                  pinname, str:emmc
[    2.940342@0] get property:                card_type, value:0x00000001
[    2.946824@0] get property:                gpio_dat3, str:
[    2.952249@0] get property:                 hw_reset, str:
[    2.964093@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.965318@0] dwc_otg: Indeed it is in host mode hprt0 = 00001101
[    3.014056@3] aml_emmc_hw_reset 1356
[    3.019331@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    3.019951@3] ion_dev has 1 memory regions
[    3.035909@3] fb: osd_init_module
[    3.036001@3] fb: viu vsync irq: 35
[    3.037048@3] meson-fb has 1 memory regions
[    3.042339@3] meson-fb meson-fb.12: assigned reserved memory node linux,meson-fb ok
[    3.048803@3] fb: osd_probe vinfo:ffffffc001dbf3e0
[    3.053520@3] fb: Frame buffer memory assigned at
[    3.058033@3] fb:     phy: 0x78000000, vir:0xffffff8003c00000, size=98304K
[    3.065000@3] fb: osd_set_res_bootargs : mode 65
[    3.069563@3] fb: fb def : 1280 800 1280 1600 32
[    3.074139@3] fb: init fbdev bpp is:32
[    3.077841@3] fb: ---------------clear fb0 memory
[    3.110067@0] fb: osd[0] canvas.idx =0x40
[    3.110086@0] fb: osd[0] canvas.addr=0x78000000
[    3.112928@0] fb: osd[0] canvas.width=5120
[    3.117050@0] fb: osd[0] canvas.height=1600
[    3.129721@0] fb: Frame buffer memory assigned at
[    3.129739@0] fb:     phy: 0x7e000000, vir:0xffffff8001a00000, size=1024K
[    3.146227@0] fb: osd probe OK
[    3.146407@0] vout_serve: vout_init_module
[    3.147779@0] vout_serve: meson_vout_probe
[    3.151840@1] emmc: BKOPS_EN bit is not set
[    3.151906@0] vout_serve: create vout attribute OK
[    3.152024@0] ge2d: ge2d_init_module
[    3.152033@0] ge2d: ge2d_dev major:244
[    3.168236@1] ge2d: ge2d clock is 400 MHZ
[    3.171983@1] ge2d: ge2d: pdev=ffffffc05baf2e00, irq=182, rstc=0xffffffc05a647700, clk=ffffffc05ba53a00
[    3.172000@0] hub 1-1:1.0: USB hub found
[    3.172291@0] hub 1-1:1.0: 4 ports detected
[    3.189344@1] ge2d: mapped phy: 0xd0160000
[    3.193316@1] ge2d: ge2d start monitor
[    3.196998@0] [aml_sd_voltage_switch][0;40;32m switch to 1.8V for a non-uhs device.
[    3.196998@0] [0m
[    3.205106@0] ge2d: ge2d workqueue monitor start
[    3.209809@0] codec:Amlogic A/V streaming port init
[    3.216354@1] codec:get gate demux control ok ffffffc05a5047c0
[    3.220426@1] codec:get gate parser_top control ok ffffffc05a504840
[    3.226656@1] codec:get gate vpu_intr control ok ffffffc05a5048c0
[    3.232710@1] codec:get gate vdec control ok ffffffc05a504940
[    3.238288@1] emmc: clk 200000000 SDR mode tuning start
[    3.243753@1] rx_tuning_result[0][1] = 10
[    3.247749@1] rx_tuning_result[0][2] = 10
[    3.251407@0] codec:[tsync_pcr_init]init success.
[    3.256337@1] rx_tuning_result[0][3] = 10
[    3.260319@1] rx_tuning_result[0][4] = 10
[    3.263992@1] best_win_start =1, best_win_size =4
[    3.268644@1] sd_emmc_regs->gclock =0x1000245, sd_emmc_regs->gadjust =0x22000
[    3.268994@0] amvenc_avc_probe -- reserved memory config fail.
[    3.268996@0] amvenc_avc - cma memory pool size: 32 MB
[    3.269019@0] encode_wq_init.
[    3.269025@0] encode start monitor.
[    3.269097@0] encode workqueue monitor start.
[    3.297318@1] emmc: gclock =0x1000245, gdelay=0x54854065
[    3.297509@0] jpegenc module init
[    3.297581@0] jpegenc probe start.
[    3.297584@0] jpegenc has 1 memory regions
[    3.297623@0] jpegenc jpegenc.24: assigned reserved memory node linux,jpegenc_cma ok
[    3.297627@0] jpegenc - cma memory pool size: 36 MB
[    3.297644@0] jpegenc memory config sucess, buff size is 0x2400000, level: 8M
[    3.297645@0] jpegenc_wq_init.
[    3.335832@1] gadjust=0x22000
[    3.335939@0] jpegenc probe end.
[    3.336091@0] codec:picdec_driver_probe called.
[    3.336094@0] picdec has 1 memory regions
[    3.336113@0] picdec picdec.20: assigned reserved memory node linux,picdec ok
[    3.336115@0] codec:picdec_driver_probe done.
[    3.336116@0] codec:reserved memory config fail , use CMA	.
[    3.367549@1] emmc: new HS200 MMC card at address 0001
[    3.370659@0] codec:cma memory is 65400000 , size is  3000000
[    3.371251@0] codec:0 addr is 65400000################
[    3.371261@0] codec:1 addr is 65577000################
[    3.371459@0] switch_vpu_mem_pd: vpu_arb ON
[    3.372046@0] codec:create_ge2d_work_queue video task ok
[    3.372410@0] codec:register clk_set_setting cpu[31]
[    3.372754@0] di_module_init ok.
[    3.372762@0] di_module_init: major 238
[    3.373078@0] di_probe
[    3.373269@0] deinterlace has 1 memory regions
[    3.373306@0] di reveser memory 0x76200000, size 30MB.
[    3.373317@0] deinterlace deinterlace.22: assigned reserved memory node linux,di ok
[    3.373516@0] rdma_register, rdma_table_addr ffffff80004ea000 rdma_table_addr_phy 5e44a000 reg_buf ffffffc059d92000
[    3.373519@0] rdma_register success, handle 1 table_size 8192
[    3.373521@0] di_probe allocate rdma channel 1.
[    3.373524@0] DI hw version 2.
[    3.373536@0] 0x000000c3:Y=c3,U=0,V=0
[    3.373538@0] 0x000000c4:Y=c4,U=0,V=0
[    3.373540@0] 0x000000c5:Y=c5,U=0,V=0
[    3.373541@0] 0x000000c6:Y=c6,U=0,V=0
[    3.373543@0] 0x000000c7:Y=c7,U=0,V=0
[    3.373545@0] 0x000000c8:Y=c8,U=0,V=0
[    3.373546@0] 0x000000c9:Y=c9,U=0,V=0
[    3.373549@0] 0x000000ca:Y=ca,U=0,V=0
[    3.373550@0] 0x000000cb:Y=cb,U=0,V=0
[    3.373552@0] 0x000000cc:Y=cc,U=0,V=0
[    3.373554@0] 0x000000cd:Y=cd,U=0,V=0
[    3.373556@0] 0x000000ce:Y=ce,U=0,V=0
[    3.373557@0] 0x000000cf:Y=cf,U=0,V=0
[    3.373666@0] di_probe here.
[    3.373681@0] switch_vpu_mem_pd: di_pre OFF
[    3.373950@0] efusekeynum: 4
[    3.373958@0] efusekeyname:             mac	offset:     0	size:     6
[    3.373963@0] efusekeyname:          mac_bt	offset:     6	size:     6
[    3.373967@0] efusekeyname:        mac_wifi	offset:    12	size:     6
[    3.373972@0] efusekeyname:            usid	offset:    18	size:    16
[    3.374408@0] efuse efuse.7: probe OK!
[    3.374770@0] 6aml_unifykeys_init done!
[    3.374772@0] ppmgr module init func called
[    3.374816@0] ppmgr_driver_probe called
[    3.374820@0] ppmgr has 1 memory regions
[    3.374837@0] init ppmgr memsource 74200000->761fffff
[    3.375123@0] ppmgr_probe done
[    3.375564@0] ionvideo-000: V4L2 device registered as video13
[    3.375571@0] [dsp]register dsp to char divece(257)
[    3.376219@0] amaudio: driver amaudio succuess!
[    3.376224@0] amlvideo_init called
[    3.376225@0] amlvideo_create_instance called
[    3.376232@0] v4l2_dev.name=:amlvideo-000
[    3.376345@0] amlvideo-000: V4L2 device registered as video10
[    3.376349@0] 
[    3.376349@0] 
[    3.376349@0]  VECM init
[    3.376349@0] 
[    3.376772@0] saradc c1108680.saradc: initialized by BL30
[    3.376776@0] saradc c1108680.saradc: calibration start:
[    3.376824@0] saradc c1108680.saradc: nominal=0, value=7
[    3.376872@0] saradc c1108680.saradc: nominal=256, value=255
[    3.376918@0] saradc c1108680.saradc: nominal=512, value=509
[    3.376964@0] saradc c1108680.saradc: nominal=768, value=764
[    3.377012@0] saradc c1108680.saradc: nominal=1023, value=1020
[    3.377016@0] saradc c1108680.saradc: calibration end: coef=4120
[    3.377139@0] remote: Driver init
[    3.377181@0] remote: platform_data g_remote_ao_offset=580
[    3.377183@0] remote: platform_data irq =228
[    3.377211@0] remote: set drvdata completed
[    3.377222@0] remote: device_create_file completed 
[    3.377505@0] input: aml_keypad as /devices/meson-remote.9/input/input0
[    3.377748@0] remote: input_register_device completed 
[    3.377805@0] remote: [0x480] = 0x1dd0190
[    3.377807@0] remote: [0x484] = 0xf800ca
[    3.377810@0] remote: [0x488] = 0x82006e
[    3.377812@0] remote: [0x48c] = 0x3c0030
[    3.377814@0] remote: [0x490] = 0x30fa0013
[    3.377816@0] remote: [0x498] = 0x6f19000
[    3.377818@0] remote: [0x49c] = 0xbe40
[    3.377820@0] remote: [0x580] = 0xfa00a0
[    3.377822@0] remote: [0x584] = 0xfa00a0
[    3.377824@0] remote: [0x588] = 0xfa00a0
[    3.377826@0] remote: [0x58c] = 0x640030
[    3.377828@0] remote: [0x590] = 0x30fa0013
[    3.377830@0] remote: [0x598] = 0x961b800
[    3.377832@0] remote: [0x59c] = 0x9740
[    3.377835@0] remote: [0x5a0] = 0x104
[    3.377836@0] remote: [0x5a4] = 0x0
[    3.377838@0] remote: [0x5a8] = 0x0
[    3.377841@0] remote: set_remote_mode[72]
[    3.377874@0] remote: remote config major:234
[    3.378045@0] remote: physical address:0x5a620000
[    3.378469@0] aml dvb init
[    3.378997@0] aml-thermal : min state:500000 400 1 2
[    3.379292@0] aml-thermal : not found gpucore node
[    3.379299@0] aml-thermal : gpu coef:437, pp:3
[    3.384363@0] aml-thermal : cdev1 set upper to 3
[    3.384366@0] aml-thermal : cdev2 set upper to 3
[    3.384369@0] aml-thermal : cdev0 set upper to 3
[    3.387439@0] aml_wdt c11098d0.amlogic-watchdog: creat work queue for watch dog
[    3.387685@0] aml_wdt c11098d0.amlogic-watchdog: AML Watchdog Timer probed done
[    3.387892@0] 6--------------------------------------------------------
[    3.387894@0] 6odroid_sysfs_init(327) : Sleep Disable Flag SET!!(Wake_lock_init)
[    3.387897@0] 6--------------------------------------------------------
[    3.388112@0] input: vt-input as /devices/virtual/input/input1
[    3.388240@0] 6Virtual-Key input driver registered!!
[    3.389056@0] adbattery: android dummy battery driver loaded
[    3.389248@0] usbcore: registered new interface driver usbio
[    3.389477@0] odroid-gpioctrl odroid_gpioctrl.29: odroid_gpioctrl_probe : success!
[    3.389826@0] odroid-gpiomem c8834000.odroid_gpiomem: Initialised: Registers at 0xc8834000
[    3.389973@0] odroid-encoder odroid_encoder.45: encoder_probe
[    3.390241@0] input: odroid-encoder as /devices/odroid_encoder.45/input/input2
[    3.390540@0] odroid-encoder odroid_encoder.45: encoder_probe success!!
[    3.390965@0] usbcore: registered new interface driver snd-usb-audio
[    3.391617@0] *****enter pcm2bt_codec_probe
[    3.391760@0] pcm5102_platform_probe
[    3.391892@0] enter aml_soc_platform_pcm2bt_probe
[    3.392258@0] divider=16,frac=33920000,SDMval=4523
[    3.392429@0] enter aml_pcm_dai_probe
[    3.392522@0] [aml-spdif-dai]enter aml_dai_spdif_init
[    3.392581@0] aml_spdif_probe
[    3.392740@0] enter spdif_dit_probe
[    3.393220@0] enter aml_asoc_init
[    3.393240@0] p_aml_audio->hp_disable=1
[    3.393242@0] falied to get spk event delay time
[    3.393244@0] spk_event delay_time = 0
[    3.393861@0] aml_snd_card aml_m8_snd.38: pcm5102 <-> I2S.30 mapping ok
[    3.394379@0] aml_snd_card aml_m8_snd.38: dit-hifi <-> SPDIF.32 mapping ok
[    3.394448@0] enter aml_pcm2bt_preallocate_dma_buffer stream: 0
[    3.394487@0] enter aml_pcm2bt_preallocate_dma_buffer stream: 1
[    3.394598@0] aml_snd_card aml_m8_snd.38: pcm2bt-pcm <-> PCM.34 mapping ok
[    3.403701@0] audio use jtag pinmux as i2s output, read val =ffffffff
[    3.407997@0] GACT probability NOT on
[    3.408009@0] Mirror/redirect action on
[    3.408014@0] u32 classifier
[    3.408015@0]     Actions configured
[    3.408021@0] Netfilter messages via NETLINK v0.30.
[    3.408070@0] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.408495@0] ctnetlink v0.93: registering with nfnetlink.
[    3.408956@0] xt_time: kernel timezone is -0000
[    3.409033@0] ipip: IPv4 over IPv4 tunneling driver
[    3.454408@2] usb 1-1.2: new low-speed USB device number 3 using dwc_otg
[    3.563355@2] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:0039.0001/input/input3
[    3.563658@2] hid-generic 0003:045E:0039.0001: input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-dwc2_b-1.2/input0
[    3.644281@2] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[    3.749279@2] input: eGalax Inc. USB TouchController Pen as /devices/dwc2_b/usb1/1-1/1-1.3/1-1.3:1.0/0003:0EEF:0001.0002/input/input4
[    3.749662@2] input: eGalax Inc. USB TouchController as /devices/dwc2_b/usb1/1-1/1-1.3/1-1.3:1.0/0003:0EEF:0001.0002/input/input5
[    3.750097@2] hid-multitouch 0003:0EEF:0001.0002: input,hiddev0: USB HID v1.00 Pointer [eGalax Inc. USB TouchController] on usb-dwc2_b-1.3/input0
[    3.996309@0] random: nonblocking pool is initialized
[    4.095125@2] emmc: clock 200000000, 8-bit-bus-width
[    4.095125@2]  
[    4.095190@2] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.095320@2] arp_tables: (C) 2002 David S. Miller
[    4.110269@2] TCP: cubic registered
[    4.113914@2] Initializing XFRM netlink socket
[    4.118479@1] mmcblk0: emmc:0001 8GTF4R 7.28 GiB 
[    4.119047@2] NET: Registered protocol family 10
[    4.119935@2] mip6: Mobile IPv6
[    4.119956@2] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    4.136333@2] sit: IPv6 over IPv4 tunneling driver
[    4.141390@1]  mmcblk0: p1 p2 p3 p4
[    4.141964@2] NET: Registered protocol family 17
[    4.142011@2] NET: Registered protocol family 15
[    4.153516@2] Bridge firewalling registered
[    4.157719@2] l2tp_core: L2TP core driver, V2.0
[    4.162129@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    4.167031@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    4.172732@2] l2tp_netlink: L2TP netlink interface
[    4.177693@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    4.183526@2] l2tp_debugfs: L2TP debugfs support
[    4.188074@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    4.194732@2] NET: Registered protocol family 35
[    4.199232@2] Key type dns_resolver registered
[    4.204562@2] Registering SWP/SWPB emulation handler
[    4.208939@2] regulator-dummy: disabling
[    4.213598@2] Number of LUNs=8
[    4.215410@2] Mass Storage Function, version: 2009/09/11
[    4.220656@2] LUN: removable file: (no medium)
[    4.225330@2] android_usb gadget: android_usb ready
[    4.230026@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    4.235607@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    4.241337@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    4.246969@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    4.252722@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    4.258454@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    4.264049@2] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[    4.270163@2] rtc-pcf8563 1-0051: hctosys: unable to read the hardware clock
[    4.278608@1] input: cec_input as /devices/virtual/input/input7
[    4.284211@3] 6enter meson_pm_probe!
[    4.286733@3] meson_pm_probe done
[    4.290153@3] ALSA device list:
[    4.293018@3]   #0: AML-M8AUDIO
[    4.296499@3] ttyS0 use xtal 24000000 change 115200 to 115200
[    4.297119@3] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (40)
[    4.306180@3] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (40)
[    4.318487@3] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.323227@3] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    4.329668@3] devtmpfs: mounted
[    4.332864@3] Freeing unused kernel memory: 968K (ffffffc001c37000 - ffffffc001d29000)
[    4.350821@0] init: init started!
[    4.351951@1] init: init second stage started!
[    4.353253@1] init: waitpid failed: No child processes
[    4.358536@1] init: (Loading properties from /default.prop took 0.00s.)
[    4.366775@1] init: (Parsing /init.environ.rc took 0.00s.)
[    4.370494@1] init: (Parsing /init.usb.rc took 0.00s.)
[    4.376511@1] init: /init.odroidc2.rc: 439: ignored duplicate definition of service 'watchdogd'
[    4.384146@1] init: (Parsing init.odroidc2.usb.rc took 0.00s.)
[    4.390069@1] init: (Parsing init.odroidc2.usb.rc took 0.00s.)
[    4.395646@1] init: init.superuser.rc: 2: ignored duplicate definition of service 'su_daemon'
[    4.403756@1] init: (Parsing init.superuser.rc took 0.01s.)
[    4.409581@1] init: (Parsing init.odroidc2.board.rc took 0.02s.)
[    4.415210@1] init: (Parsing /init.odroidc2.rc took 0.04s.)
[    4.421403@1] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[    4.426911@1] init: (Parsing /init.zygote32.rc took 0.00s.)
[    4.432452@1] init: (Parsing /init.trace.rc took 0.00s.)
[    4.437702@1] init: (Parsing /init.rc took 0.07s.)
[    4.442370@1] init: Starting service 'ueventd'...
[    4.448227@3] ueventd: ueventd started!
[    4.518553@1] mali-utgard d00c0000.mali: set min pp to default 1
[    4.518918@1] mali-utgard d00c0000.mali: set min clk default to 0
[    4.525077@1] mali-utgard d00c0000.mali: max clk set 4
[    4.530046@1] mali-utgard d00c0000.mali: turbo clk set to 5
[    4.535594@1] mali-utgard d00c0000.mali: default clk set to 2
[    4.543334@2] cdev3 set upper to 2
[    4.544676@2] cdev4 set upper to 2
[    4.547984@2] gpu cooling register okay with err=0
[    4.552856@2] gpu core cooling register okay with err=0
[    4.558255@2] Mali: Mali device driver loaded
[    4.636134@3] ueventd: Coldboot took 0.18s.
[    4.645458@2] ttyS0 use xtal 24000000 change 115200 to 115200
[    4.671263@2] file system registered
[    4.671461@0] watchdogd: watchdogd started (interval 10, margin 20)!
[    4.671530@2] init: property 'sys.usb.state' doesn't exist while expanding '${sys.usb.state}'
[    4.671542@2] init: cannot expand '${sys.usb.state}' while assigning to 'sys.usb.config'
[    4.671794@2] ffs_data_put(): freeing
[    4.671846@2] init: property 'sys.usb.state' doesn't exist while expanding '${sys.usb.state}'
[    4.671856@2] init: cannot expand '${sys.usb.state}' while assigning to 'sys.usb.config'
[    4.712539@3] fs_mgr: __mount(source=/dev/block/mmcblk0p2,target=/system,type=ext4)=0
[    4.720772@3] EXT4-fs (mmcblk0p4): Ignoring removed nomblk_io_submit option
[    4.729767@3] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    4.737515@3] fs_mgr: check_fs(): mount(/dev/block/mmcblk0p4,/data,ext4)=0: Success
[    4.784663@2] fs_mgr: check_fs(): unmount(/data) succeeded
[    4.784753@2] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p4
[    4.833942@2] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    4.833942@2] 
[    4.834686@2] e2fsck: /dev/block/mmcblk0p4: clean, 4238/335872 files, 200402/1343488 blocks
[    4.834686@2] 
[    4.847996@2] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[    4.852796@2] fs_mgr: __mount(source=/dev/block/mmcblk0p4,target=/data,type=ext4)=0
[    4.860775@2] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[    4.869763@2] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    4.877942@2] fs_mgr: check_fs(): mount(/dev/block/mmcblk0p3,/cache,ext4)=0: Success
[    4.934605@2] fs_mgr: check_fs(): unmount(/cache) succeeded
[    4.934652@2] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p3
[    4.958851@2] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    4.958851@2] 
[    4.959576@2] e2fsck: cache: clean, 19/65536 files, 83912/262144 blocks
[    4.959576@2] 
[    4.970618@2] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    4.976021@2] fs_mgr: __mount(source=/dev/block/mmcblk0p3,target=/cache,type=ext4)=0
[    4.984476@2] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    4.993649@2] fs_mgr: __mount(source=/dev/block/mmcblk0p1,target=/internal,type=vfat)=0
[    5.008402@2] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.020551@3] init: /recovery not specified in fstab
[    5.030238@3] init: Failed to reload policy
[    5.035593@0] logd.auditd: start
[    5.035651@0] logd.klogd: 5021606000
[    5.101918@1] logd.daemon: reinit
[    5.114292@0] usbcore: registered new interface driver btusb
[    5.119013@0] vfm_map_store:rm default
[    5.119077@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    5.125031@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
[    5.134501@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[    5.147062@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
[    5.156753@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
[    5.169441@0] init: property_set("ro.radio.noril", "true" failed
[    5.175537@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
[    5.184984@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[    5.197537@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
[    5.207266@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
[    5.221371@1] ttyS0 use xtal 24000000 change 115200 to 115200
[    5.222345@0] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[    5.229095@0] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[    5.236979@0] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
[    5.247928@0] android_usb: already disabled
[    5.248505@0] mtp_bind_config
[    5.251650@0] WARN::ep_dequeue:412: bogus device state
[    5.251650@0] 
[    5.258226@0] mtp_bind_config
[    5.270056@2] remote: cur_mode = 0
[    5.270086@2] remote: [0x580] = 0x1f40190
[    5.271804@2] remote: [0x584] = 0x12c00c8
[    5.275960@2] remote: [0x588] = 0x960050
[    5.279656@2] remote: [0x58c] = 0x480028
[    5.283536@2] remote: [0x590] = 0x70fa0013
[    5.287589@2] remote: [0x598] = 0x8616800
[    5.291557@2] remote: [0x59c] = 0x9f00
[    5.295368@2] remote: [0x5a0] = 0x0
[    5.299087@2] remote: [0x5a4] = 0x0
[    5.302244@2] remote: [0x5a8] = 0x0
[    5.305670@2] remote: set_remote_mode[72]
[    5.311796@2] remote: do nothing
[    5.408509@3] fb: osd[0] canvas.idx =0x40
[    5.408511@3] fb: osd[0] canvas.addr=0x78000000
[    5.408513@3] fb: osd[0] canvas.width=5120
[    5.408515@3] fb: osd[0] canvas.height=2400
[    5.432661@3] fb: osd[1] canvas.idx =0x43
[    5.432663@3] fb: osd[1] canvas.addr=0x7e000000
[    5.432665@3] fb: osd[1] canvas.width=128
[    5.432667@3] fb: osd[1] canvas.height=32
[    5.460690@3] vout_serve: vmode set to custombuilt
[    5.464894@3] vout_serve: don't set the same mode as current.
[    5.714240@0] switch_vpu_mem_pd: viu_vd1 OFF
[    5.714276@0] switch_vpu_mem_pd: afbc_dec OFF
[    5.717198@0] switch_vpu_mem_pd: di_post OFF
[    5.721423@0] switch_vpu_mem_pd: viu_vd2 OFF
[    5.771642@2] fb: osd[0] enable: 0 (systemcontrol)
[    5.830609@2] fb: osd[0] enable: 1 (systemcontrol)
[    5.847074@2] vout_serve: osd0=> x:0,y:0,w:1280,h:800
[    5.847074@2] osd1=> x:0,y:0,w:18,h:18
[    5.858544@2] fb: current vmode=custombuilt
[    5.864399@2] fb: osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
[    5.865117@2] fb: osd[1].scaledata: 1280 1280 800 800
[    5.870128@2] fb: osd[1].pandata: 0 31 0 31
[    7.919837@2] warning: `main' uses 32-bit capabilities (legacy support in use)
[    8.838422@2] request_suspend_state: wakeup (3->0) at 8824386000 (1970-01-01 00:00:08.824385000 UTC)
[    8.841888@2] request_suspend_state,164,old_sleep=0,new_state=0
[   11.049388@3] tv_vout: vout [tv_set_vframe_rate_end_hint] return mode = 67, policy = 1!
[   13.747219@0] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[   13.748924@0] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[   13.754548@0] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[   13.760206@0] lowmemorykiller: oom_adj 4 => oom_score_adj 235
[   13.765891@0] lowmemorykiller: oom_adj 6 => oom_score_adj 352
[   13.771573@0] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[   13.777263@0] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[   14.340169@0] acc_open
[   14.340202@0] acc_release
[   15.395661@3] avc open
[   15.395690@3] amvenc_avc  check CMA pool sucess, max instance: 1.
[   15.398465@3] allocating phys 0x61300000, size 18432k, wq:ffffffc058367200.
[   15.406649@3] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc058367200.
[   15.419588@0] avc release, wq:ffffffc058367200
[   15.419670@0] remove  encode_work_queue ffffffc058367200 sucess, _destroy_encode_work_queue line 3563.
[   15.431139@0] ionvideo open
[   15.624189@0] ionvideo_stop_generating!!!!
[   15.624270@0] ionvideo release
[   15.627598@0] ionvideo open
[   15.824106@0] ionvideo_stop_generating!!!!
[   15.824153@0] ionvideo release
[   15.827380@0] ionvideo open
[   16.024080@0] ionvideo_stop_generating!!!!
[   16.024136@0] ionvideo release
[   16.027608@0] ionvideo open
[   16.224115@0] ionvideo_stop_generating!!!!
[   16.224216@0] ionvideo release
[   16.227870@0] ionvideo open
[   16.424110@0] ionvideo_stop_generating!!!!
[   16.424157@0] ionvideo release
[   16.428623@3] ionvideo open
[   16.635145@2] ionvideo_stop_generating!!!!
[   16.635207@2] ionvideo release
[   16.651122@0] ionvideo open
[   16.844172@0] ionvideo_stop_generating!!!!
[   16.844240@0] ionvideo release
[   16.855813@0] ionvideo open
[   17.054195@0] ionvideo_stop_generating!!!!
[   17.054266@0] ionvideo release
[   17.057821@0] ionvideo open
[   17.254098@0] ionvideo_stop_generating!!!!
[   17.254155@0] ionvideo release
[   17.257292@0] ionvideo open
[   17.454178@0] ionvideo_stop_generating!!!!
[   17.454301@0] ionvideo release
[   17.458222@0] ionvideo open
[   17.654100@0] ionvideo_stop_generating!!!!
[   17.654176@0] ionvideo release
[   18.020706@3] avc open
[   18.020746@3] allocating phys 0x61300000, size 18432k, wq:ffffffc057c5dc00.
[   18.024633@3] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc057c5dc00.
[   18.034920@3] avc release, wq:ffffffc057c5dc00
[   18.038862@3] remove  encode_work_queue ffffffc057c5dc00 sucess, _destroy_encode_work_queue line 3563.
[   18.178120@1] avc open
[   18.178174@1] allocating phys 0x61300000, size 18432k, wq:ffffffc057c8a600.
[   18.182081@1] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc057c8a600.
[   18.192508@1] avc release, wq:ffffffc057c8a600
[   18.196581@1] remove  encode_work_queue ffffffc057c8a600 sucess, _destroy_encode_work_queue line 3563.
[   18.325538@2] avc open
[   18.325579@2] allocating phys 0x61300000, size 18432k, wq:ffffffc0416f3800.
[   18.329221@2] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc0416f3800.
[   18.340008@2] avc release, wq:ffffffc0416f3800
[   18.344018@2] remove  encode_work_queue ffffffc0416f3800 sucess, _destroy_encode_work_queue line 3563.
[   18.484025@2] avc open
[   18.484100@2] allocating phys 0x61300000, size 18432k, wq:ffffffc0416f2800.
[   18.487676@2] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc0416f2800.
[   18.500519@2] avc release, wq:ffffffc0416f2800
[   18.502045@2] remove  encode_work_queue ffffffc0416f2800 sucess, _destroy_encode_work_queue line 3563.
[   18.591695@0] avc open
[   18.591743@0] allocating phys 0x61300000, size 18432k, wq:ffffffc057c83c00.
[   18.595511@0] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc057c83c00.
[   18.606592@0] avc release, wq:ffffffc057c83c00
[   18.609845@0] remove  encode_work_queue ffffffc057c83c00 sucess, _destroy_encode_work_queue line 3563.
[   18.677272@3] avc open
[   18.677321@3] allocating phys 0x61300000, size 18432k, wq:ffffffc057c81a00.
[   18.680919@3] amvenc_avc  memory config sucess, buff start:0x61300000, size is 0x1200000, wq:ffffffc057c81a00.
[   18.691745@3] avc release, wq:ffffffc057c81a00
[   18.695444@3] remove  encode_work_queue ffffffc057c81a00 sucess, _destroy_encode_work_queue line 3563.
[   18.804364@1] libphy: stmmac-0:00 - Link is Up - 1000/Full
[   18.895684@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   18.895811@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   18.904383@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   18.908121@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   18.913873@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   18.922658@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   18.924386@1] rtc-pcf8563 1-0051: pcf8563_set_datetime: err=-11 addr=02, data=10
[   18.934279@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   18.937304@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   18.943445@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   18.945477@2] alarm lock suspend
[   18.955102@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   18.966366@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[   18.966475@1] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[   18.972385@1] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[   20.234788@2] .gms.persistent[3624]: syscall 384
[   20.234817@2] Code: e1a01002 e1a02003 e89c0078 ef000000 (e8bd00f0) 
[   20.240090@2] CPU: 2 PID: 3624 Comm: .gms.persistent Tainted: G           O 3.14.29-gb08bf9f #1
[   20.248624@2] task: ffffffc042eda000 ti: ffffffc05ac94000 task.ti: ffffffc05ac94000
[   20.256207@2] PC is at 0xf6ef5ba0
[   20.259471@2] LR is at 0xdfe218ef
[   20.262749@2] pc : [<00000000f6ef5ba0>] lr : [<00000000dfe218ef>] pstate: 20070010
[   20.270267@2] sp : 00000000ff901f18
[   20.273703@2] x12: 00000000ff901f28 
[   20.277239@2] x11: 00000000f4fb6500 x10: 0000000000000000 
[   20.282672@2] x9 : 0000000000000001 x8 : 00000000dfe21761 
[   20.288106@2] x7 : 0000000000000180 x6 : 0000000000000000 
[   20.293539@2] x5 : 00000000dfe37f8c x4 : 0000000000000000 
[   20.298973@2] x3 : 0000000000000004 x2 : 0000000000000001 
[   20.304407@2] x1 : 0000000000000001 x0 : 00000000ff901f43 
[   20.309840@2] 
[   23.114030@3] gle.android.gms[3962]: syscall 384
[   23.114093@3] Code: e1a01002 e1a02003 e89c0078 ef000000 (e8bd00f0) 
[   23.119227@3] CPU: 3 PID: 3962 Comm: gle.android.gms Tainted: G           O 3.14.29-gb08bf9f #1
[   23.127890@3] task: ffffffc0583e9000 ti: ffffffc05b2a8000 task.ti: ffffffc05b2a8000
[   23.135482@3] PC is at 0xf6ef5ba0
[   23.138715@3] LR is at 0xdfe218ef
[   23.141990@3] pc : [<00000000f6ef5ba0>] lr : [<00000000dfe218ef>] pstate: 20070010
[   23.149523@3] sp : 00000000ff901f18
[   23.152945@3] x12: 00000000ff901f28 
[   23.156481@3] x11: 00000000f4fb6500 x10: 0000000000000000 
[   23.161913@3] x9 : 0000000000000001 x8 : 00000000dfe21761 
[   23.167348@3] x7 : 0000000000000180 x6 : 0000000000000000 
[   23.172782@3] x5 : 00000000dfe37f8c x4 : 0000000000000000 
[   23.178216@3] x3 : 0000000000000004 x2 : 0000000000000001 
[   23.183648@3] x1 : 0000000000000001 x0 : 00000000ff901f43 
[   23.189082@3] 
[   23.979037@0] alarm lock suspend
[   33.277042@2] alarm lock suspend
[   33.314611@3] binder: 3624: binder_alloc_buf size 1056768 failed, no address space
[   33.316529@3] binder: 3962:4639 transaction failed 29201, size 1056768-0
[   36.813007@2] id.gms.unstable[4733]: syscall 384
[   36.813070@2] Code: e1a01002 e1a02003 e89c0078 ef000000 (e8bd00f0) 
[   36.818281@2] CPU: 2 PID: 4733 Comm: id.gms.unstable Tainted: G           O 3.14.29-gb08bf9f #1
[   36.827121@2] task: ffffffc029af7000 ti: ffffffc029b24000 task.ti: ffffffc029b24000
[   36.834569@2] PC is at 0xf6ef5ba0
[   36.837748@2] LR is at 0xdfe218ef
[   36.841008@2] pc : [<00000000f6ef5ba0>] lr : [<00000000dfe218ef>] pstate: 20070010
[   36.848520@2] sp : 00000000ff901f18
[   36.851930@2] x12: 00000000ff901f28 
[   36.855468@2] x11: 00000000f4fb6500 x10: 0000000000000000 
[   36.860897@2] x9 : 0000000000000001 x8 : 00000000dfe21761 
[   36.866333@2] x7 : 0000000000000180 x6 : 0000000000000000 
[   36.871765@2] x5 : 00000000dfe37f8c x4 : 0000000000000000 
[   36.884210@2] x3 : 0000000000000004 x2 : 0000000000000001 
[   36.886100@2] x1 : 0000000000000001 x0 : 00000000ff901f43 
[   36.891532@2] 
[   40.230519@1] binder: 3624:3647 refcount change on invalid ref 200
[   40.239390@0] binder: 3624:4136 refcount change on invalid ref 200
[   40.239935@0] binder: 3624:4136 refcount change on invalid ref 200
[   40.247152@0] binder: transaction release 41742 bad handle 200
[   42.152712@2] .android.gms.ui[4949]: syscall 384
[   42.152746@2] Code: e1a01002 e1a02003 e89c0078 ef000000 (e8bd00f0) 
[   42.157963@2] CPU: 2 PID: 4949 Comm: .android.gms.ui Tainted: G           O 3.14.29-gb08bf9f #1
[   42.166679@2] task: ffffffc029af2000 ti: ffffffc0276d4000 task.ti: ffffffc0276d4000
[   42.174220@2] PC is at 0xf6ef5ba0
[   42.177404@2] LR is at 0xdfe218ef
[   42.180687@2] pc : [<00000000f6ef5ba0>] lr : [<00000000dfe218ef>] pstate: 20070010
[   42.188218@2] sp : 00000000ff901f18
[   42.191632@2] x12: 00000000ff901f28 
[   42.195497@2] x11: 00000000f4fb6500 x10: 0000000000000000 
[   42.200600@2] x9 : 0000000000000001 x8 : 00000000dfe21761 
[   42.206037@2] x7 : 0000000000000180 x6 : 0000000000000000 
[   42.211469@2] x5 : 00000000dfe37f8c x4 : 0000000000000000 
[   42.216903@2] x3 : 0000000000000004 x2 : 0000000000000001 
[   42.222335@2] x1 : 0000000000000001 x0 : 00000000ff901f43 
[   42.227770@2] 
[   43.849187@1] fb: osd[1] canvas.idx =0x43
[   43.849189@1] fb: osd[1] canvas.addr=0x7e000000
[   43.849192@1] fb: osd[1] canvas.width=128
[   43.849193@1] fb: osd[1] canvas.height=28
[   45.337039@1] alarm lock suspend
[   48.519575@0] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   64.895038@3] alarm lock suspend
[   79.547185@1] binder: 3201:3268 transaction failed 29189, size 328-0

User avatar
odroid
Site Admin
Posts: 35301
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 1089 times
Been thanked: 825 times
Contact:

Re: touch screen support - JoyIt Touch Display RB-LCD10-2

Post by odroid »

The dmesg output looks okay.

Did you mean the touchscreen worked but the coordination was wrong on C2 Android too?
Is it a resistive type touchscreen? or capacitive type?

gg_a
Posts: 8
Joined: Sun Jan 05, 2020 8:38 pm
languages_spoken: english
ODROIDs: C2
Has thanked: 0
Been thanked: 0
Contact:

Re: touch screen support - JoyIt Touch Display RB-LCD10-2

Post by gg_a »

The touchscreen works under C2/Android, it's a capacitive one.
I turned on the visual point to see where the touch responds.
=> the center is fine, but if I wipe to the right, the pointer goes up. If I wipe upwards the pointer goes to the side. Whether the scaling of the distance is correct is difficult to estimate, but I think so.
When I set the setenv touch_invert_x or _y in the boot.ini, the direction changes, but not the orientation...
To change in the odriod setup horizontal/landsscape, then also the error changes to the other direction...

User avatar
odroid
Site Admin
Posts: 35301
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 1089 times
Been thanked: 825 times
Contact:

Re: touch screen support - JoyIt Touch Display RB-LCD10-2

Post by odroid »

I have no idea how to fix the strange issue indeed. Sorry about that.

Post Reply

Return to “Android”

Who is online

Users browsing this forum: No registered users and 1 guest