Odroid C2 mainline kernel support

Post Reply
brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Sun Apr 30, 2017 6:25 pm

To make it easy for others who want to test but dont want to go about building their own kernel ive made available a prebuilt version.

Its based upon 4.10.10 as mentioned above with many in development patches (As provided from Neil Armstrongs git) added for upcoming features and a modified config to add extra USB device drivers. It also has built in Ethernet drivers to allow an NFS rootfs boot. It does not include mali modules but does include HDMI support

Guide to install onto the standard Ubuntu Mate image. (or any distro for that matter should work)

1) Ensure your system is fully up to date.

2) On the Odroid download and install modules

Code: Select all

$ wget http://repo.builtonline.net/testing/custom/4.10.10-testing/modules-4.10.10.tar.gz
$ sudo tar -xvf modules-4.10.10.tar.gz -C /
3) download prebuilt uImage and device tree onto boot partition

Code: Select all

$ cd /media/boot
$ wget http://repo.builtonline.net/testing/custom/4.10.10-testing/uImage
$ wget http://repo.builtonline.net/testing/custom/4.10.10-testing/meson-gxbb-odroidc2.dtb 
4) Backup original boot.ini and download new version compatible with uImage format

Code: Select all

$ mv boot.ini boot.ini.hardkernel
$ wget http://repo.builtonline.net/testing/custom/4.10.10-testing/boot.ini
5) Sync filesystem to ensure nothing is left cached

Code: Select all

$ sync
6) reboot

To revert to the standard hardkernel kernel simply revert the boot.ini file on the boot partition from the version you backed up in step 4.

There are a couple of issues ive discovered

- A thin purple line exists down the left hand side of the screen (does not exist in the screenshot but you can see a slight tear in the 1080p video with no mali acceleration but given that performance is great)
- HDMI audio not working (I know it can with this kernel but not sure what is wrong yet with the Ubuntu setup)
- In Ubuntu audio is stuck at 2 channel in pulse for all devices, to resolve edit /etc/pulse/daemon.conf and add the following line

Code: Select all

default-sample-channels = 8
I will upload the source code in the next 24 hours the directory http://repo.builtonline.net/testing/cus ... 0-testing/
Attachments
Screenshot.png

User avatar
FoxBob79
Posts: 17
Joined: Thu Apr 28, 2016 4:37 am
languages_spoken: german, english
ODROIDs: odroidC2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by FoxBob79 » Mon May 01, 2017 12:35 am

Amazing!! That sounds fantastic!! I will try it... :-D

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Mon May 01, 2017 12:41 am

Alsa started working over HDMI when I removed pulseaduio :) and the thin purple line down the left disappeared when I removed the mali-x11 package from Ubuntu :)

User avatar
FoxBob79
Posts: 17
Joined: Thu Apr 28, 2016 4:37 am
languages_spoken: german, english
ODROIDs: odroidC2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by FoxBob79 » Mon May 01, 2017 12:50 am

It works like a charme!! :-) But I could use it only as a server. My Keyboard is not working on the USB-Ports...

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Mon May 01, 2017 12:54 am

FoxBob79 wrote:It works like a charme!! :-) But I could use it only as a server. My Keyboard is not working on the USB-Ports...
That's a pity :( USB has been working well for me, I have a few sound cards and wireless keyboard / mouse plugged in. I wonder if there are any error messages in the logs? What type of keyboard is it I may have missed a driver.

User avatar
FoxBob79
Posts: 17
Joined: Thu Apr 28, 2016 4:37 am
languages_spoken: german, english
ODROIDs: odroidC2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by FoxBob79 » Mon May 01, 2017 12:57 am

I use a Cherry MX Board, but I will try different Keyboards...

FORGET what i have written!! It was a problem with my USB-Cable :-/

moon.linux
Posts: 1165
Joined: Thu Oct 02, 2014 11:42 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by moon.linux » Mon May 01, 2017 4:47 am

Thanks brad for saving my time on compilation of kernel.

User avatar
FoxBob79
Posts: 17
Joined: Thu Apr 28, 2016 4:37 am
languages_spoken: german, english
ODROIDs: odroidC2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by FoxBob79 » Mon May 01, 2017 6:50 am

I took the Ubuntu-Minimal-OdroidC2 Image and updated it on zesty. After that I installed your kernel. It runs like I have never seen my C2 running... :-)

Thousand THANKS for your work!! :-)

User avatar
odroid
Site Admin
Posts: 31799
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 86 times
Been thanked: 242 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by odroid » Mon May 01, 2017 9:16 am

Thank you I really appreciate your great work.
I could not image that our C2 can run Kernel 4.10 Aarch64 so earlier.

moon.linux
Posts: 1165
Joined: Thu Oct 02, 2014 11:42 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by moon.linux » Mon May 01, 2017 12:46 pm

Performance on Sandisk micro sdcard class 10 is not good on the latest kernel.

On performance on upgrade I get this crash,

Code: Select all

[  484.311588] INFO: task kworker/3:0:30 blocked for more than 120 seconds.
[  484.312645]       Not tainted 4.10.10 #2
[  484.316546] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  484.324322] kworker/3:0     D    0    30      2 0x00000000
[  484.324337] Workqueue: events_freezable mmc_rescan
[  484.324340] Call trace:
[  484.324348] [<ffff000008085620>] __switch_to+0x90/0xa8
[  484.324354] [<ffff0000088ee4a8>] __schedule+0x188/0x578
[  484.324357] [<ffff0000088ee8d0>] schedule+0x38/0xa0
[  484.324361] [<ffff00000875cba4>] __mmc_claim_host+0x8c/0x198
[  484.324364] [<ffff00000875ccd8>] mmc_get_card+0x28/0x38
[  484.324367] [<ffff000008765228>] mmc_sd_detect+0x18/0x70
[  484.324371] [<ffff00000875f9cc>] mmc_rescan+0x1c4/0x388
[  484.324377] [<ffff0000080da1d0>] process_one_work+0x120/0x368
[  484.324381] [<ffff0000080da460>] worker_thread+0x48/0x488
[  484.324385] [<ffff0000080e0208>] kthread+0xf0/0x120
[  484.324388] [<ffff000008082ec0>] ret_from_fork+0x10/0x50
[  597.046070] systemd-journald[1182]: Sent WATCHDOG=1 notification.
[  657.044642] systemd-journald[1182]: Sent WATCHDOG=1 notification.
[  669.549790] systemd-journald[1182]: Successfully sent stream file descriptor to service manager.
[  755.863144] systemd-journald[1182]: Sent WATCHDOG=1 notification.

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Mon May 01, 2017 2:59 pm

moon.linux wrote:Performance on Sandisk micro sdcard class 10 is not good on the latest kernel.
I have one of those as well I can try. More mmc patches have been added in past week which were not included in the build I posted. I will try to add these as well.

I have now also set the kernel boot parameter from "rw" to "ro" to allow fdsk to work correctly in the event of an unclean shutdown.

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Mon May 01, 2017 8:24 pm

moon.linux wrote:Performance on Sandisk micro sdcard class 10 is not good on the latest kernel.
The version I posted based on 4.10.10 stable and in development patches Neil Armstrong has made available does not include the performance improvements that Heiner Kallweit has produced for meson mmc...
https://patchwork.kernel.org/project/li ... ter=116541

Testers have reported huge improvements in speed for both mmc and sd with them applied but they dont apply very cleanly to 4.10.10 so would like to wait until Neil's patches are rebased on a newer version.

4.11 was released today so hopefully not to far away.

BTW I have now upload the source I used to build prebuilt version at http://repo.builtonline.net/testing/cus ... ded.tar.gz
Patches used are in the patches folder and there is a .config file with the config used to build

best_odroidfreak
Posts: 365
Joined: Wed May 04, 2016 1:07 am
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by best_odroidfreak » Mon May 01, 2017 11:35 pm

moon.linux wrote:Thanks brad for saving my time on compilation of kernel.
Thank you for your work! Please explain, when a new Linux kernel 4 will be finally compiled for Odroid c2?

User avatar
mad_ady
Posts: 6377
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4, C1+, C2, N1, H2, N2
Location: Bucharest, Romania
Has thanked: 146 times
Been thanked: 106 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by mad_ady » Tue May 02, 2017 12:36 am

best_odroidfreak wrote:
moon.linux wrote:Thanks brad for saving my time on compilation of kernel.
Thank you for your work! Please explain, when a new Linux kernel 4 will be finally compiled for Odroid c2?
I'm sure that nobody knows. It's safe to say that it will be ready when it's ready :)

User avatar
rooted
Posts: 6588
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 88 times
Been thanked: 17 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by rooted » Tue May 02, 2017 1:53 pm

Was the system doing a lot of io?

xxxbugxxxx
Posts: 10
Joined: Thu May 05, 2016 5:50 pm
languages_spoken: english
ODROIDs: c2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by xxxbugxxxx » Tue May 02, 2017 2:50 pm

Hi Brad

Great, work, just one request, can you add CIFS support into this kernel?

Really need that and seems the kernel is not built with CIFS.

Thank you very much!

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Tue May 02, 2017 5:27 pm

xxxbugxxxx wrote:Hi Brad

Great, work, just one request, can you add CIFS support into this kernel?

Really need that and seems the kernel is not built with CIFS.

Thank you very much!
No problems its building now, also adding more usb device drivers including DVB, webcam, gamepads, mass storage and others. Will attempt some sd/mmc card performance improvements if all goes well and maybe try my luck with some experimental maii-x11 for Ubuntu before uploading.

Kernel and module size will increase (remember this is for testing to allow features to be tested) but will try to lighten it up a bit in the future to be specific for the Odroid C2

If anyone has any extra features such as filesystem / networking related now would be the time to let me know.

Edit: will upload a new version tomorrow, im now looking at adding further improvements for S905 hardware audio as well and possibly an alternative version with hard realtime kernel patches applied
Cheers,
Brad.

xxxbugxxxx
Posts: 10
Joined: Thu May 05, 2016 5:50 pm
languages_spoken: english
ODROIDs: c2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by xxxbugxxxx » Wed May 03, 2017 5:56 am

real time kernerl will be great.
While you ask, can we have a pure headless realtime server with CIFS and minimal video realted stuff?(for running MPD audio stuff)

Thank you very much

otec
Posts: 168
Joined: Sat Feb 06, 2016 7:08 pm
languages_spoken: english
ODROIDs: C2 + eMMC 64Gb
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by otec » Wed May 03, 2017 7:15 am

brad wrote:To make it easy for others who want to test but dont want to go about building their own kernel ive made available a prebuilt version.

Its based upon 4.10.10 as mentioned above with many in development patches (As provided from Neil Armstrongs git) added for upcoming features and a modified config to add extra USB device drivers. It also has built in Ethernet drivers to allow an NFS rootfs boot. It does not include mali modules but does include HDMI support
Hi Brad, thanks for your effort to bring latest kernel to C2!

I've got a problem with your images. I followed exactly the procedures you wrote and mine C2 refuses to boot.

Here is console output:

Code: Select all

GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 176990
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000018c0
Wait bl30...Done
Sending bl301.......OK.
Run bl301...
MMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00073510
: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.292053 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01-00189-g205c7b3 (Feb 27 2017 - 10:53:13)

DRAM:  2 GiB
Relocation Offset is: 76f32000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFCC287
MAC : 00:1e:06:33:0f:07
BID : HKC2211602
-------------------------------------------------
register usb cfg[1][0] = 0000000077f95058
register usb cfg[0][1] = 0000000077f95078
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f2ad30
aml_priv->desc_buf = 0x0000000073f2cec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 64 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 61024, count 2048 ... 2048 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
3262 bytes read in 2 ms (1.6 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv bootrootfs "boot=/dev/mmcblk1p1 disk=/dev/mmcblk1p2 root=/dev/mmcblk1p2"
cfgload: setenv console "console=tty0 console=ttyAML0,115200n8"
cfgload: setenv odroid   "no_console_suspend consoleblank=0 loglevel=8 debug rw rootwait"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv kernel  "fatload mmc 0:1 0x1080000 uImage"
cfgload: setenv dtb     "fatload mmc 0:1 0x1000000 meson-gxbb-odroidc2.dtb"
cfgload: setenv bootseq "bootm 0x1080000 - 0x1000000"
cfgload: setenv bootcmd "${kernel}; ${dtb}; ${bootseq}"
cfgload: setenv bootargs "${console} ${bootrootfs} ${odroid} ${libreelec}"
cfgload: run bootcmd
reading uImage
15006272 bytes read in 348 ms (41.1 MiB/s)
reading meson-gxbb-odroidc2.dtb
18650 bytes read in 4 ms (4.4 MiB/s)
ee_gate_off ...
## Booting kernel from Legacy Image at 01080000 ...
   Image Name:   linux
   Image Type:   AArch64 Linux Kernel Image (uncompressed)
   Data Size:    15006208 Bytes = 14.3 MiB
   Load Address: 01080000
   Entry Point:  01080000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Kernel Image ... OK
   kernel loaded at 0x01080000, end = 0x01ecfa00
   Loading Device Tree to 000000001fff8000, end 000000001ffff8d9 ... OK

Starting kernel ...

uboot time: 3517614 us
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.10.10 (odroid@odroid64) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #2 SMP PREEMPT Sun Apr 30 01:50:17 EDT 2017
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000006c400000, size 188 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] On node 0 totalpages: 486912
[    0.000000]   DMA zone: 7616 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 486912 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] percpu: Embedded 21 pages/cpu @ffff80006c380000 s48152 r8192 d29672 u86016
[    0.000000] pcpu-alloc: s48152 r8192 d29672 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 479296
[    0.000000] Kernel command line: console=tty0 console=ttyAML0,115200n8 boot=/dev/mmcblk1p1 disk=/dev/mmcblk1p2 root=/dev/mmcblk1p2 no_console_suspend consoleblank=0 loglevel=8 debug rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 1703664K/1947648K available (8700K kernel code, 958K rwdata, 3892K rodata, 1024K init, 394K bss, 51472K reserved, 192512K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff000008900000   (  8704 KB)
[    0.000000]     .rodata : 0xffff000008900000 - 0xffff000008ce0000   (  3968 KB)
[    0.000000]       .init : 0xffff000008ce0000 - 0xffff000008de0000   (  1024 KB)
[    0.000000]       .data : 0xffff000008de0000 - 0xffff000008ecfa00   (   959 KB)
[    0.000000]        .bss : 0xffff000008ecfa00 - 0xffff000008f3244c   (   395 KB)
[    0.000000]     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
[    0.000000]               0xffff7e0000040000 - 0xffff7e0001e00000   (    29 MB actual)
[    0.000000]     memory  : 0xffff800001000000 - 0xffff800078000000   (  1904 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000255] Console: colour dummy device 80x25
[    0.000723] console [tty0] enabled
[    0.000745] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000766] pid_max: default: 32768 minimum: 301
[    0.000816] Security Framework initialized
[    0.000850] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000862] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.011989] ASID allocator initialised with 65536 entries
[    0.032423] EFI services will not be available.
[    0.048028] smp: Bringing up secondary CPUs ...
[    0.080696] Detected VIPT I-cache on CPU1
[    0.080732] CPU1: Booted secondary processor [410fd034]
[    0.112717] Detected VIPT I-cache on CPU2
[    0.112736] CPU2: Booted secondary processor [410fd034]
[    0.144755] Detected VIPT I-cache on CPU3
[    0.144770] CPU3: Booted secondary processor [410fd034]
[    0.144799] smp: Brought up 1 node, 4 CPUs
[    0.144860] SMP: Total of 4 processors activated.
[    0.144872] CPU features: detected feature: 32-bit EL0 Support
[    0.144910] CPU: All CPU(s) started at EL2
[    0.144931] alternatives: patching kernel code
[    0.145352] devtmpfs: initialized
[    0.147927] DMI not present or invalid.
[    0.148074] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.148099] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.151342] pinctrl core: initialized pinctrl subsystem
[    0.152305] NET: Registered protocol family 16
[    0.168874] cpuidle: using governor menu
[    0.169270] vdso: 2 pages (1 code @ ffff000008907000, 1 data @ ffff000008de5000)
[    0.169295] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.169806] DMA: preallocated 256 KiB pool for atomic allocations
[    0.170025] Serial: AMBA PL011 UART driver
[    0.192605] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.193617] ACPI: Interpreter disabled.
[    0.194510] vgaarb: loaded
[    0.194691] SCSI subsystem initialized
[    0.194795] libata version 3.00 loaded.
[    0.194980] usbcore: registered new interface driver usbfs
[    0.195018] usbcore: registered new interface driver hub
[    0.195059] usbcore: registered new device driver usb
[    0.195377] pps_core: LinuxPPS API ver. 1 registered
[    0.195389] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.195416] PTP clock support registered
[    0.195510] dmi: Firmware registration failed.
[    0.195765] Advanced Linux Sound Architecture Driver Initialized.
[    0.196401] clocksource: Switched to clocksource arch_sys_counter
[    0.196502] VFS: Disk quotas dquot_6.6.0
[    0.196545] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.196704] pnp: PnP ACPI: disabled
[    0.201117] NET: Registered protocol family 2
[    0.201471] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.201571] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.201763] TCP: Hash tables configured (established 16384 bind 16384)
[    0.201834] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.201875] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.201993] NET: Registered protocol family 1
[    0.202181] RPC: Registered named UNIX socket transport module.
[    0.202193] RPC: Registered udp transport module.
[    0.202203] RPC: Registered tcp transport module.
[    0.202213] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.202227] PCI: CLS 0 bytes, default 128
[    0.202744] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.202926] kvm [1]: 8-bit VMID
[    0.202937] kvm [1]: IDMAP page: 18f4000
[    0.202946] kvm [1]: HYP VA range: 800000000000:ffffffffffff
[    0.203502] kvm [1]: Hyp mode initialized successfully
[    0.203537] kvm [1]: vgic-v2@c4304000
[    0.203593] kvm [1]: vgic interrupt IRQ1
[    0.203610] kvm [1]: virtual timer IRQ4
[    0.205177] audit: initializing netlink subsys (disabled)
[    0.205655] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.210791] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.211237] NFS: Registering the id_resolver key type
[    0.211264] Key type id_resolver registered
[    0.211274] Key type id_legacy registered
[    0.211289] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.211420] 9p: Installing v9fs 9p2000 file system support
[    0.212897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.212921] io scheduler noop registered
[    0.213072] io scheduler cfq registered (default)
[    0.214467] GPIO line 4 (usb-hub-reset) hogged as output/high
[    0.219294] xenfs: not registering filesystem on non-xen platform
[    0.222050] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.223222] SuperH (H)SCI(F) driver initialized
[    0.223486] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 12, base_baud = 1500000) is a meson_uart
[    0.989935] console [ttyAML0] enabled
[    0.993875] msm_serial: driver initialized
[    1.001311] loop: module loaded
[    1.001929] hisi_sas: driver version v1.6
[    1.006723] libphy: Fixed MDIO Bus: probed
[    1.009154] tun: Universal TUN/TAP device driver, 1.6
[    1.013681] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.020741] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.025586] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.031503] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    1.038346] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.043915] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.051634] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.057539] sky2: driver version 1.30
[    1.061938] meson8b-dwmac c9410000.ethernet: no reset control found
[    1.067334] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    1.072327] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[    1.078108] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[    1.085529] meson8b-dwmac c9410000.ethernet: Normal descriptors
[    1.091390] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[    1.098812] meson8b-dwmac c9410000.ethernet: COE Type 2
[    1.103981] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[    1.110967] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[    1.117372] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.125373] libphy: stmmac: probed
[    1.129457] VFIO - User Level meta-driver version: 0.3
[    1.135018] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.140220] ehci-pci: EHCI PCI platform driver
[    1.144652] ehci-platform: EHCI generic platform driver
[    1.149884] ehci-exynos: EHCI EXYNOS driver
[    1.154005] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    1.159513] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.165577] ohci-pci: OHCI PCI platform driver
[    1.170015] ohci-platform: OHCI generic platform driver
[    1.175218] ohci-exynos: OHCI EXYNOS driver
[    1.179675] usbcore: registered new interface driver usb-storage
[    1.186102] mousedev: PS/2 mouse device common for all mice
[    1.191674] i2c /dev entries driver
[    1.196850] sdhci: Secure Digital Host Controller Interface driver
[    1.200321] sdhci: Copyright(c) Pierre Ossman
[    1.204915] Synopsys Designware Multimedia Card Interface Driver
[    1.211381] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[    1.256789] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.257631] ledtrig-cpu: registered to indicate activity on CPUs
[    1.263142] meson-sm: secure-monitor enabled
[    1.267373] usbcore: registered new interface driver usbhid
[    1.272537] usbhid: USB HID core driver
[    1.276586] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[    1.284770] NET: Registered protocol family 17
[    1.287701] 9pnet: Installing 9P2000 support
[    1.291915] Key type dns_resolver registered
[    1.296560] registered taskstats version 1
[    1.304648] c9000000.usb supply vusb_d not found, using dummy regulator
[    1.306646] c9000000.usb supply vusb_a not found, using dummy regulator
[    1.314273] phy phy-c0000000.phy.0: USB ID detect failed!
[    1.318498] phy phy-c0000000.phy.0: phy poweron failed --> -22
[    1.324339] dwc2: probe of c9000000.usb failed with error -22
[    1.330809] c9100000.usb supply vusb_d not found, using dummy regulator
[    1.336717] c9100000.usb supply vusb_a not found, using dummy regulator
[    1.460556] dwc2 c9100000.usb: DWC OTG Controller
[    1.460596] dwc2 c9100000.usb: new USB bus registered, assigned bus number 1
[    1.466686] dwc2 c9100000.usb: irq 33, io mem 0x00000000
[    1.472010] mmc0: new HS200 MMC card at address 0001
[    1.472475] hub 1-0:1.0: USB hub found
[    1.472492] hub 1-0:1.0: 1 port detected
[    1.473752] meson-gx-mmc d0072000.mmc: Got CD GPIO
[    1.489402] mmcblk0: mmc0:0001 CGND3R 58.2 GiB
[    1.493722] mmcblk0boot0: mmc0:0001 CGND3R partition 1 4.00 MiB
[    1.499582] mmcblk0boot1: mmc0:0001 CGND3R partition 2 4.00 MiB
[    1.505950]  mmcblk0: p1 p2
[    1.514270] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version
[    1.518508] hctosys: unable to open rtc device (rtc0)
[    1.520350] USB_OTG_PWR: disabling
[    1.523625] TFLASH_VDD: disabling
[    1.526895] TF_IO: disabling
[    1.529742] ALSA device list:
[    1.532667]   No soundcards found.
[    1.541690] Waiting for root device /dev/mmcblk1p2...
[    1.868409] usb 1-1: new high-speed USB device number 2 using dwc2
[    2.078122] hub 1-1:1.0: USB hub found
[    2.078424] hub 1-1:1.0: 4 ports detected

Any ideas why ? I'm using emmc card.

crashoverride
Posts: 4492
Joined: Tue Dec 30, 2014 8:42 pm
languages_spoken: english
ODROIDs: C1
Has thanked: 0
Been thanked: 62 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by crashoverride » Wed May 03, 2017 8:14 am

Code: Select all

[    1.541690] Waiting for root device /dev/mmcblk1p2...
Its trying to load the rootfs from the SD card that is not preset. The eMMC is shown as /dev/mmcblk0 (note zero instead of one).

You should change the entry in the boot.ini (or whatever is used[*]) to match your eMMC (/dev/mmcblk0p2).

[*] I have not used the image.

otec
Posts: 168
Joined: Sat Feb 06, 2016 7:08 pm
languages_spoken: english
ODROIDs: C2 + eMMC 64Gb
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by otec » Wed May 03, 2017 2:27 pm

crashoverride wrote:

Code: Select all

[    1.541690] Waiting for root device /dev/mmcblk1p2...
Its trying to load the rootfs from the SD card that is not preset. The eMMC is shown as /dev/mmcblk0 (note zero instead of one).

You should change the entry in the boot.ini (or whatever is used[*]) to match your eMMC (/dev/mmcblk0p2).

[*] I have not used the image.
This worked, thank you!

otec
Posts: 168
Joined: Sat Feb 06, 2016 7:08 pm
languages_spoken: english
ODROIDs: C2 + eMMC 64Gb
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by otec » Wed May 03, 2017 3:41 pm

How do I enable Ethernet device? I don't see eth0 interface in /dev.

Do I need to make some config changes?

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Wed May 03, 2017 6:51 pm

otec wrote:How do I enable Ethernet device? I don't see eth0 interface in /dev.

Do I need to make some config changes?
A network device is not normally part of the /dev filesystem in Linux and it not normally read or written to, but the Ethernet port should be enabled by default.

To confirm you can check on the sys flesystem...

Code: Select all

$ cat /sys/class/net/eth0/operstate 
up

umiddelb
Posts: 451
Joined: Thu Jan 29, 2015 6:42 am
languages_spoken: English, German
ODROIDs: ODROID-C1, ODROID-XU4, ODROID-C2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by umiddelb » Fri May 05, 2017 6:01 pm

brad wrote:...
BTW I have now upload the source I used to build prebuilt version at http://repo.builtonline.net/testing/cus ... ded.tar.gz
Patches used are in the patches folder and there is a .config file with the config used to build
Hi Brad,

I've put the content of your patches folder into this github repository (and tried to find appropriate categories for them). The branch v4.10 is your original patchset. In branch v4.11 I've added my own patches for the C2 (starting with 'c2.') and removed patches which cannot be applied to the 4.11 kernel tree (still have to check patches in the 'video' folder).

Cheers
Uli

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Fri May 05, 2017 6:11 pm

umiddelb wrote:
brad wrote:...
BTW I have now upload the source I used to build prebuilt version at http://repo.builtonline.net/testing/cus ... ded.tar.gz
Patches used are in the patches folder and there is a .config file with the config used to build
Hi Brad,

I've put the content of your patches folder into this github repository (and tried to find appropriate categories for them). The branch v4.10 is your original patchset. In branch v4.11 I've added my own patches for the C2 (starting with 'c2.') and removed patches which cannot be applied to the 4.11 kernel tree (still have to check patches in the 'video' folder).

Cheers
Uli
Thank you Uli this is awsome (they are really Neil's patches) I noticed I accidentally I left the mmc patches starting with b000* in the source :( they were not suposed to be there for the moment and only the beginning, they are a WIP to attempt to apply to 4.10.10 and were not part of my build, sorry for this)

FYI there is a "series" file there which I use to allow quilt patch tool to apply and reverse in the correct order.

PS: there should also be a hidden ".pc" file if I tarred correctly that would allow quilt (if you use it) to undo the changes I made in the source tar.gz file that I made before uploading the source with patches b001....-b004..... applied.

giov
Posts: 1
Joined: Sat May 06, 2017 5:26 pm
languages_spoken: english
ODROIDs: c1, c1+, c2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by giov » Sat May 06, 2017 5:34 pm

Many many thanks for your amazing work !
It would be very great to get usb FTDI drivers

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Sun May 07, 2017 4:40 pm

Same version 4.10.10 but with a different kernel config including the following drivers and features.

- CIFS support (included CIFS extended support)
- Additional USB Drivers (webcams, DVB, audio, serial, keyboards, mice, gamepads, video dongles, industrial, sensors, etc)
- Additional I2C bus based driver support
- Dallas 1 wire support
- Additional NFS client and server features support

Folder:
http://repo.builtonline.net/testing/cus ... esting/v2/

uImage: http://repo.builtonline.net/testing/cus ... /v2/uImage
devicetree: http://repo.builtonline.net/testing/cus ... roidc2.dtb
modules: http://repo.builtonline.net/testing/cus ... -v2.tar.gz

Use the same boot.ini: http://repo.builtonline.net/testing/cus ... g/boot.ini

Next version will hopefully be based on 4.11 with improved mmc support, a full alsa soundcard to support most of the odroid C2 sound interfaces (PCM, I2S, SPDIF, HDMI) and remote IR driver.

best_odroidfreak
Posts: 365
Joined: Wed May 04, 2016 1:07 am
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by best_odroidfreak » Sun May 07, 2017 8:29 pm

See Kernel mainlining progress http://linux-meson.com/doku.php

Current upstreaming efforts are focused around the S905/S905D/S905X/S912 SoCs (GXBB/GXL/GXM from the Meson GX family). Secondarily there are also some efforts around the S805 SoC (Meson8b), and the AML7826MX (Meson6) since they are widespread in many consumer products.
Supported/WiP SoC Families

Meson6 : Dual 32bit Cortex-A9
AML8726MX
Meson8 : Quad 32bit Cortex-A9
S802
Meson8b : Similar as Meson8 but with Quad 32bit Cortex-A5
S805
GXBB : Quad 64bit Cortex-A53
S905
GXL : Quad 64bit Cortex-A53
S905D : Similar as S905, but with internal 10/100 Ethernet PHY (Gigabit Ethernet still requires an external PHY)
S905X : Identical to S905D but without Gigabit Ethernet
GXM : Identical to GXL but with Octo 64bit Cortex-A53
S912 : Pin compatible with S905D

v4.12 (WiP)
DRM/KMS: added support for HDMI output
clocks: added clocks for audio, GFX (Mali)
pinctrl: added pins for audio, missing pins for GXL/GXM
phy: added GPIO resets for ethernet PHYs
Add clocks and DT node for Mali-450 support for GXBB/GXL (using off-tree driver)
Meson GX MMC
performance improvements
eMMC calibration support
CMD23 support
misc. cleanup and refactoring
Enhanced board support
Amlogic P212 (S905X)
new boards
Khadas Vim (S905X)
HwaCom AmazeTV (S905X)

v4.11

SAR ADC support
ADC laddered keys (P200 board)
New board support
Wetek Play (S905)
Wetek Hub (S905)

Basharat
Posts: 3
Joined: Wed Nov 30, 2016 6:10 am
languages_spoken: english
ODROIDs: odroid C2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by Basharat » Mon May 08, 2017 11:52 pm

brad wrote:
rgadsdon wrote:I have booted the C2 with a recent version of 'Linux-Next', plus the meson-ethernet-tx patch from Jerome Brunet. USB still does not work, but Ethernet works correctly, at full speed...
More info here: http://rglinuxtech.com/?p=1850

Robert Gadsdon.
November 21, 2016.
Hi Robert,

USB is working well for me with recent linux-next although others have reported problems like yourself. Are you using the master branch of linux-next? 4.9-rc6 is stil missing the relevant config for the meson/odroid but linux-next seems to have it all.

Thanks Brad.

could you please send me your defconfig where the usb is working ?

redhad
Posts: 20
Joined: Wed May 03, 2017 10:58 pm
languages_spoken: english, german, russian, french
ODROIDs: C2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by redhad » Tue May 09, 2017 1:02 am

I have here gentoo-sources-4.11 running. Those are just vanilla sources. I did a minimal config of mine (driver-wise).
USB works. I've commented out gentoo-specific settings, which trigger some cgroups/namespaces options, which will still be enabled in a vanilla kernel.
(This config favors nftables in favor of xtables.)

USB for the C2 hides under CONFIG_USB_DWC2, (Device Drivers --> USB Support --> DesignWare USB2 DRD Core Support).

Code: Select all

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 4.11.0-gentoo Kernel Configuration
#

#
# Gentoo Linux
#
#CONFIG_GENTOO_LINUX=y
#CONFIG_GENTOO_LINUX_UDEV=y
#CONFIG_GENTOO_LINUX_PORTAGE=y

#
# Support for init systems, system and service managers
#
#CONFIG_GENTOO_LINUX_INIT_SCRIPT=y
# CONFIG_GENTOO_LINUX_INIT_SYSTEMD is not set
CONFIG_ARM64=y
CONFIG_64BIT=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_ARM64_PAGE_SHIFT=12
CONFIG_ARM64_CONT_SHIFT=4
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_BITS_MAX=33
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NO_IOPORT_MAP=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
CONFIG_HAVE_GENERIC_RCU_GUP=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_SMP=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_DEFAULT_HOSTNAME="c2"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_SOCK_CGROUP_DATA is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not set
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
CONFIG_GCC_PLUGIN_STRUCTLEAK=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_CLONE_BACKWARDS=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y

#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS=y
CONFIG_MODULE_COMPRESS_GZIP=y
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_MQ_IOSCHED_DEADLINE is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set

#
# Platform selection
#
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_ALPINE is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_BCM_IPROC is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_BRCMSTB is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_LG1K is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_MEDIATEK is not set
CONFIG_ARCH_MESON=y
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SEATTLE is not set
# CONFIG_ARCH_RENESAS is not set
# CONFIG_ARCH_STRATIX10 is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_SPRD is not set
# CONFIG_ARCH_THUNDER is not set
# CONFIG_ARCH_THUNDER2 is not set
# CONFIG_ARCH_UNIPHIER is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_VULCAN is not set
# CONFIG_ARCH_XGENE is not set
# CONFIG_ARCH_ZX is not set
# CONFIG_ARCH_ZYNQMP is not set

#
# Bus support
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_DOMAINS_GENERIC is not set
# CONFIG_PCI_SYSCALL is not set

#
# DesignWare PCI Core Support
#

#
# Kernel Features
#

#
# ARM errata workarounds via the alternatives framework
#
CONFIG_ARM64_ERRATUM_826319=y
CONFIG_ARM64_ERRATUM_827319=y
CONFIG_ARM64_ERRATUM_824069=y
CONFIG_ARM64_ERRATUM_819472=y
CONFIG_ARM64_ERRATUM_832075=y
CONFIG_ARM64_ERRATUM_843419=y
CONFIG_CAVIUM_ERRATUM_22375=y
CONFIG_CAVIUM_ERRATUM_23144=y
CONFIG_CAVIUM_ERRATUM_23154=y
CONFIG_CAVIUM_ERRATUM_27456=y
CONFIG_QCOM_FALKOR_ERRATUM_1003=y
CONFIG_QCOM_FALKOR_ERRATUM_1009=y
CONFIG_QCOM_QDF2400_ERRATUM_0065=y
CONFIG_ARM64_4K_PAGES=y
# CONFIG_ARM64_16K_PAGES is not set
# CONFIG_ARM64_64K_PAGES is not set
# CONFIG_ARM64_VA_BITS_39 is not set
CONFIG_ARM64_VA_BITS_48=y
CONFIG_ARM64_VA_BITS=48
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SCHED_MC=y
# CONFIG_SCHED_SMT is not set
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=2
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_HOLES_IN_ZONE=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MOVABLE_NODE is not set
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_AREAS=7
# CONFIG_ZSWAP is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_SECCOMP=y
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# CONFIG_XEN is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_ARM64_SW_TTBR0_PAN is not set

#
# ARMv8.1 architectural features
#
CONFIG_ARM64_HW_AFDBM=y
CONFIG_ARM64_PAN=y
# CONFIG_ARM64_LSE_ATOMICS is not set
CONFIG_ARM64_VHE=y

#
# ARMv8.2 architectural features
#
CONFIG_ARM64_UAO=y
CONFIG_ARM64_MODULE_CMODEL_LARGE=y
CONFIG_ARM64_MODULE_PLTS=y
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_RANDOMIZE_MODULE_REGION_FULL=y

#
# Boot options
#
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_EFI is not set

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# CONFIG_COMPAT is not set

#
# Power management options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y

#
# CPU Power Management
#

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_DT_IDLE_STATES=y

#
# ARM CPU Idle Drivers
#
CONFIG_ARM_CPUIDLE=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
# CONFIG_ARM_DT_BL_CPUFREQ is not set
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
CONFIG_ARM_SCPI_CPUFREQ=y
# CONFIG_QORIQ_CPUFREQ is not set
CONFIG_NET=y
CONFIG_NET_INGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
# CONFIG_NF_CONNTRACK_MARK is not set
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_NF_NAT_TFTP is not set
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=m
CONFIG_NF_TABLES_NETDEV=m
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
CONFIG_NFT_RT=m
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_SET_RBTREE=m
CONFIG_NFT_SET_HASH=m
CONFIG_NFT_SET_BITMAP=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
# CONFIG_NFT_FIB_INET is not set
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
# CONFIG_NETFILTER_XTABLES is not set
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NFT_MASQ_IPV4=m
CONFIG_NFT_REDIR_IPV4=m
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NF_NAT_MASQUERADE_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
# CONFIG_IP6_NF_IPTABLES is not set
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_LOG_BRIDGE=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_ARM_AMBA=y

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
# CONFIG_ARM_CCI400_PMU is not set
# CONFIG_ARM_CCI5xx_PMU is not set
# CONFIG_ARM_CCN is not set
# CONFIG_VEXPRESS_CONFIG is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=m
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=m
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_SPI_NOR=m
# CONFIG_MTD_MT81xx_NOR is not set
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_UBI is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_NUMA=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=m
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_HAVE_PATA_PLATFORM=y
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_QORIQ is not set
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
# CONFIG_NLMON is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_DWMAC_DWC_QOS_ETH=y
CONFIG_DWMAC_GENERIC=y
CONFIG_DWMAC_MESON=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MDIO bus device drivers
#
# CONFIG_MDIO_BCM_UNIMAC is not set
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_BUS_MUX=m
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_MDIO_BUS_MUX_MMIOREG=m
CONFIG_MDIO_GPIO=m
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_OCTEON is not set

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MESON_GXL_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
# CONFIG_WLAN_VENDOR_INTEL is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_WLAN_VENDOR_REALTEK is not set
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_AMBAKMI is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_MESON=y
# CONFIG_R3964 is not set

#
# PCMCIA character devices
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CADENCE is not set
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MESON=y
# CONFIG_I2C_NOMADIK is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
CONFIG_SPI_MESON_SPIFC=y
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PL022 is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_SX150X is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_DWAPB is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_PL061 is not set
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_XGENE is not set
# CONFIG_GPIO_XILINX is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set

#
# SPI or I2C GPIO expanders
#
# CONFIG_GPIO_MCP23S08 is not set

#
# USB GPIO expanders
#
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_XGENE is not set
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_ARM_SCPI=y
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
# CONFIG_CLOCK_THERMAL is not set
CONFIG_THERMAL_EMULATION=y
# CONFIG_QORIQ_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
# CONFIG_ARM_SBSA_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_MESON_GXBB_WATCHDOG=y
# CONFIG_MESON_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_DRM=m
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_UDL is not set
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_HISI_KIRIN is not set
# CONFIG_DRM_MXSFB is not set
CONFIG_DRM_MESON=m
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_ARMCLCD is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FB_CON_DECOR is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# HD-Audio
#
CONFIG_SND_HDA_PREALLOC_SIZE=2048
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_DEBUG is not set
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_DUMMY_HCD is not set
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_ARMMMCI is not set
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_MESON_GX=y
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_SYSCON=y
# CONFIG_LEDS_USER is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
# CONFIG_AMBA_PL08X is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_MV_XOR_V2 is not set
# CONFIG_PL330_DMA is not set
# CONFIG_XILINX_DMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
CONFIG_COMMON_CLK_VERSATILE=y
CONFIG_CLK_SP810=y
CONFIG_COMMON_CLK_SCPI=y
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_COMMON_CLK_XGENE is not set
# CONFIG_COMMON_CLK_NXP is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_COMMON_CLK_VC5 is not set
CONFIG_COMMON_CLK_AMLOGIC=y
CONFIG_COMMON_CLK_GXBB=y

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_FSL_ERRATUM_A008585 is not set
# CONFIG_HISILICON_ERRATUM_161010101 is not set
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_ARM_MHU=y
CONFIG_PLATFORM_MHU=y
# CONFIG_PL320_MBOX is not set
# CONFIG_ALTERA_MBOX is not set
# CONFIG_MAILBOX_TEST is not set
# CONFIG_BCM_PDC_MBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
CONFIG_IOMMU_IOVA=y
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_V3=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_SOC_ZTE is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
# CONFIG_IIO_BUFFER is not set
# CONFIG_IIO_CONFIGFS is not set
# CONFIG_IIO_TRIGGER is not set
# CONFIG_IIO_SW_DEVICE is not set
# CONFIG_IIO_SW_TRIGGER is not set

#
# Accelerometers
#
# CONFIG_BMA180 is not set
# CONFIG_BMA220 is not set
# CONFIG_BMC150_ACCEL is not set
# CONFIG_DA280 is not set
# CONFIG_DA311 is not set
# CONFIG_DMARD06 is not set
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_MC3230 is not set
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
# CONFIG_MMA7660 is not set
# CONFIG_MMA8452 is not set
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
# CONFIG_MXC4005 is not set
# CONFIG_MXC6255 is not set
# CONFIG_SCA3000 is not set
# CONFIG_STK8312 is not set
# CONFIG_STK8BA50 is not set

#
# Analog to digital converters
#
# CONFIG_AD7266 is not set
# CONFIG_AD7291 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7766 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7923 is not set
# CONFIG_AD799X is not set
# CONFIG_CC10001_ADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
# CONFIG_HI8435 is not set
# CONFIG_HX711 is not set
# CONFIG_INA2XX_ADC is not set
# CONFIG_LTC2485 is not set
# CONFIG_MAX1027 is not set
# CONFIG_MAX11100 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MCP320X is not set
# CONFIG_MCP3422 is not set
CONFIG_MESON_SARADC=y
# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_TI_ADC0832 is not set
# CONFIG_TI_ADC12138 is not set
# CONFIG_TI_ADC128S052 is not set
# CONFIG_TI_ADC161S626 is not set
# CONFIG_TI_ADS1015 is not set
# CONFIG_TI_ADS7950 is not set
# CONFIG_TI_ADS8688 is not set
# CONFIG_TI_TLC4541 is not set
# CONFIG_VF610_ADC is not set

#
# Amplifiers
#
# CONFIG_AD8366 is not set

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_IAQCORE is not set
# CONFIG_VZ89X is not set

#
# Hid Sensor IIO Common
#

#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set

#
# Counters
#

#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5449 is not set
# CONFIG_AD5592R is not set
# CONFIG_AD5593R is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_AD5686 is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5761 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD7303 is not set
# CONFIG_AD8801 is not set
# CONFIG_DPOT_DAC is not set
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
# CONFIG_MCP4922 is not set
# CONFIG_VF610_DAC is not set

#
# IIO dummy driver
#

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set

#
# Digital gyroscope sensors
#
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16136 is not set
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS450 is not set
# CONFIG_BMG160 is not set
# CONFIG_MPU3050_I2C is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4403 is not set
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set

#
# Humidity sensors
#
# CONFIG_AM2315 is not set
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
# CONFIG_HTS221 is not set
# CONFIG_HTU21 is not set
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set

#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16480 is not set
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
# CONFIG_KMX61 is not set
# CONFIG_INV_MPU6050_SPI is not set
# CONFIG_IIO_ST_LSM6DSX is not set

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_AL3320A is not set
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
# CONFIG_BH1750 is not set
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
# CONFIG_CM3605 is not set
# CONFIG_CM36651 is not set
# CONFIG_GP2AP020A00F is not set
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_ISL29125 is not set
# CONFIG_JSA1212 is not set
# CONFIG_RPR0521 is not set
# CONFIG_LTR501 is not set
# CONFIG_MAX44000 is not set
# CONFIG_OPT3001 is not set
# CONFIG_PA12203001 is not set
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set
# CONFIG_VEML6070 is not set

#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
# CONFIG_BMC150_MAGN_I2C is not set
# CONFIG_BMC150_MAGN_SPI is not set
# CONFIG_MAG3110 is not set
# CONFIG_MMC35240 is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_HMC5843_SPI is not set

#
# Inclinometer sensors
#

#
# Digital potentiometers
#
# CONFIG_DS1803 is not set
# CONFIG_MAX5481 is not set
# CONFIG_MAX5487 is not set
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
# CONFIG_TPL0102 is not set

#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
# CONFIG_BMP280 is not set
# CONFIG_HP03 is not set
# CONFIG_MPL115_I2C is not set
# CONFIG_MPL115_SPI is not set
# CONFIG_MPL3115 is not set
# CONFIG_MS5611 is not set
# CONFIG_MS5637 is not set
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set
# CONFIG_HP206C is not set
# CONFIG_ZPA2326 is not set

#
# Lightning sensors
#
# CONFIG_AS3935 is not set

#
# Proximity and distance sensors
#
# CONFIG_LIDAR_LITE_V2 is not set
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set

#
# Temperature sensors
#
# CONFIG_MAXIM_THERMOCOUPLE is not set
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
# CONFIG_TMP007 is not set
# CONFIG_TSYS01 is not set
# CONFIG_TSYS02D is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_MESON=y
# CONFIG_PWM_PCA9685 is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_GIC_V3=y
CONFIG_PARTITION_PERCPU=y
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
CONFIG_RESET_MESON=y
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_TI_SYSCON_RESET is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_XGENE is not set
CONFIG_PHY_MESON8B_USB2=y
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_ARM_PMU=y
CONFIG_RAS=y

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
# CONFIG_DEV_DAX is not set
CONFIG_NVMEM=y
CONFIG_MESON_EFUSE=y
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
CONFIG_ARM_PSCI_FW=y
# CONFIG_ARM_PSCI_CHECKER is not set
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_MESON_SM=y

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_VIRTUALIZATION is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_STACKTRACE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_HAVE_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set

#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM64_PTDUMP_CORE is not set
# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
# CONFIG_DEBUG_WX is not set
# CONFIG_DEBUG_ALIGN_RODATA is not set
# CONFIG_CORESIGHT is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
CONFIG_ARM64_CRYPTO=y
# CONFIG_CRYPTO_SHA256_ARM64 is not set
# CONFIG_CRYPTO_SHA512_ARM64 is not set
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_GHASH_ARM64_CE=y
# CONFIG_CRYPTO_CRCT10DIF_ARM64_CE is not set
# CONFIG_CRYPTO_CRC32_ARM64_CE is not set
# CONFIG_CRYPTO_AES_ARM64 is not set
CONFIG_CRYPTO_AES_ARM64_CE=y
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
# CONFIG_CRYPTO_CHACHA20_NEON is not set
# CONFIG_CRYPTO_AES_ARM64_BS is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_LIBFDT=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_SBITMAP=y

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Tue May 09, 2017 4:36 pm

Basharat wrote: could you please send me your defconfig where the usb is working ?
Which version of the kernel are you using, you may need a patch similar to this to workaround in the devicetree for the moment https://git.kernel.org/pub/scm/linux/ke ... 905adf0c6b

USB should be enabled through a normal defconf

OpenProgger
Posts: 7
Joined: Sat Apr 29, 2017 2:58 am
languages_spoken: english,german
ODROIDs: Odroid C2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by OpenProgger » Wed May 10, 2017 5:46 am

I finally bought a UART-USB adapter and booted again a 4.10 kernel with hdmi support.
You can see it hangs while loading DRM(still using mainline u-boot).

Code: Select all

INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State ON
INFO:      AffInst: Level 0, MPID 0x2, State ON
INFO:      AffInst: Level 0, MPID 0x3, State ON
bl31 reb�GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:0;
TE: 131295
no sdio debug board detected 

BL2 Built : 11:44:26, Nov 25 2015. 
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from SD, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK. 
Run bl30...
Load bl301 from SD, src: 0x0001c200, des: 0x01000000, size: 0x000012d0
Wait bl30...Done
Sending bl301.....OK. 
Run bl301...
d bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: ef be Load bl33 from SD, src: 0x00034200, des: 0x01000000, size: 0x000550b0
ad de d f0 ad ba ef be ad de not ES chip
[0.246053 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2017.05-rc2-00129-g1e6776000e-dirty (May 09 2017 - 19:42:31 +0200) odroid-c2

DRAM:  2 GiB
MMC:   mmc@72000: 0, mmc@74000: 1
Using default environment

In:    serial@4c0
Out:   serial@4c0
Err:   serial@4c0
Net:   eth0: ethernet@c9410000
Hit any key to stop autoboot:  0 
18650 bytes read in 13 ms (1.4 MiB/s)
10082816 bytes read in 493 ms (19.5 MiB/s)
## Starting EFI application at 01080000 ...
Scanning disk mmc@72000.blk...
Card did not respond to voltage select!
mmc_init: -95, time 9
Found 1 disks
EFI stub: Booting Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied
EFI stub: ERROR: could not determine UEFI Secure Boot status.
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
Booting Linux on physical CPU 0x0
Linux version 4.10.13-gentoo (root@odroidc2) (gcc version 6.3.0 (Gentoo 6.3.0 p1.0) ) #1 SMP Tue May 9 22:19:42 CEST 2017
Boot CPU: AArch64 Processor [410fd034]
efi: Getting EFI parameters from FDT:
efi: EFI v2.05 by Das U-boot
efi:  SMBIOS=0x7c568000 
Reserved memory: created CMA memory pool at 0x0000000070800000, size 188 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
psci: probing for conduit method from DT.
psci: PSCIv0.2 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
percpu: Embedded 21 pages/cpu @ffffffc07ff55000 s46360 r8192 d31464 u86016
Detected VIPT I-cache on CPU0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 511551
Kernel command line: console=tty0 console=ttyAML0,115200n8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1839592K/2078716K available (5244K kernel code, 374K rwdata, 1340K rodata, 2816K init, 324K bss, 46612K reserved, 192512K cma-reserved)
Virtual kernel memory layout:
    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
    vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
      .text : 0xffffff8008080000 - 0xffffff80085a0000   (  5248 KB)
    .rodata : 0xffffff80085a0000 - 0xffffff8008700000   (  1408 KB)
      .init : 0xffffff8008700000 - 0xffffff80089c0000   (  2816 KB)
      .data : 0xffffff80089c0000 - 0xffffff8008a1da00   (   375 KB)
       .bss : 0xffffff8008a1da00 - 0xffffff8008a6ea04   (   325 KB)
    fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
    PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
    vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
              0xffffffbf00040000 - 0xffffffbf02000000   (    31 MB actual)
    memory  : 0xffffffc001000000 - 0xffffffc080000000   (  2032 MB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 64.
NR_IRQS:64 nr_irqs:64 0
GIC: Using split EOI/Deactivate mode
arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
ASID allocator initialised with 65536 entries
Remapping and enabling EFI services.
  EFI remap 0x000000007c568000 => 0000000020008000
  EFI remap 0x000000007ffa9000 => 0000000020019000
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
CPU1: Booted secondary processor [410fd034]
Detected VIPT I-cache on CPU2
CPU2: Booted secondary processor [410fd034]
Detected VIPT I-cache on CPU3
CPU3: Booted secondary processor [410fd034]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected feature: 32-bit EL0 Support
CPU: All CPU(s) started at EL2
devtmpfs: initialized
SMBIOS 3.0 present.
DMI: amlogic odroid-c2/odroid-c2, BIOS 2017.05-rc2-00129-g1e6776000e-dirty 05/09/2017
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 1024 (order: 5, 131072 bytes)
xor: measuring software checksum speed
   8regs     :  2947.200 MB/sec
   8regs_prefetch:  2627.200 MB/sec
   32regs    :  3491.200 MB/sec
   32regs_prefetch:  3047.600 MB/sec
xor: using function: 32regs (3491.200 MB/sec)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor menu
vdso: 2 pages (1 code @ ffffff80085a5000, 1 data @ ffffff80089c4000)
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
DMA: preallocated 256 KiB pool for atomic allocations
HugeTLB registered 2 MB page size, pre-allocated 0 pages
raid6: int64x1  gen()   522 MB/s
raid6: int64x1  xor()   561 MB/s
raid6: int64x2  gen()   835 MB/s
raid6: int64x2  xor()   757 MB/s
raid6: int64x4  gen()  1258 MB/s
raid6: int64x4  xor()   967 MB/s
raid6: int64x8  gen()  1408 MB/s
raid6: int64x8  xor()   933 MB/s
raid6: neonx1   gen()   926 MB/s
raid6: neonx1   xor()   969 MB/s
raid6: neonx2   gen()  1483 MB/s
raid6: neonx2   xor()  1322 MB/s
raid6: neonx4   gen()  1933 MB/s
raid6: neonx4   xor()  1513 MB/s
raid6: neonx8   gen()  2032 MB/s
raid6: neonx8   xor()  1565 MB/s
raid6: using algorithm neonx8 gen() 2032 MB/s
raid6: .... xor() 1565 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
kvm [1]: 8-bit VMID
kvm [1]: IDMAP page: 1599000
kvm [1]: HYP VA range: 4000000000:7fffffffff
kvm [1]: Hyp mode initialized successfully
kvm [1]: vgic-v2@c4304000
kvm [1]: vgic interrupt IRQ1
kvm [1]: virtual timer IRQ4
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(3.210:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=19 bucket_order=0
zbud: loaded
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v8r8 (with cgroups support)
GPIO line 4 (usb-hub-reset) hogged as output/high
c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 12, base_baud = 1500000) is a meson_uart
console [ttyAML0] enabled
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform: EHCI generic platform driver
usbcore: registered new interface driver usb-storage
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
ledtrig-cpu: registered to indicate activity on CPUs
meson-sm: secure-monitor enabled
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: a3f1b02f656a39bb7b34a0351c3b72c8955ccc1e'
zswap: loaded using pool lzo/zbud
Btrfs loaded, crc32c=crc32c-arm64-hw
c9000000.usb supply vusb_d not found, using dummy regulator
c9000000.usb supply vusb_a not found, using dummy regulator
phy phy-c0000000.phy.0: USB ID detect failed!
phy phy-c0000000.phy.0: phy poweron failed --> -22
dwc2: probe of c9000000.usb failed with error -22
c9100000.usb supply vusb_d not found, using dummy regulator
c9100000.usb supply vusb_a not found, using dummy regulator
dwc2 c9100000.usb: DWC OTG Controller
dwc2 c9100000.usb: new USB bus registered, assigned bus number 1
dwc2 c9100000.usb: irq 33, io mem 0x00000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 4.10.13-gentoo dwc2_hsotg
usb usb1: SerialNumber: c9100000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
meson-gx-mmc d0072000.mmc: Got CD GPIO
hctosys: unable to open rtc device (rtc0)
VCC1V8: disabling
VCC3V3: disabling
USB_OTG_PWR: disabling
Freeing unused kernel memory: 2816K
mmc1: new high speed SDHC card at address a530
mmcblk1: mmc1:a530 SU04G 3.69 GiB 
 mmcblk1: p1 p2
usb 1-1: new high-speed USB device number 2 using dwc2
usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
random: fast init done
usb 1-1.4: new high-speed USB device number 3 using dwc2
usb 1-1.4: New USB device found, idVendor=0930, idProduct=0b09
usb 1-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-1.4: Product: USB 3.5"-HDD
usb 1-1.4: Manufacturer: TOSHIBA
usb 1-1.4: SerialNumber: 201001120FCD
usb-storage 1-1.4:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1.4:1.0
random: crng init done
scsi 0:0:0:0: Direct-Access     TOSHIBA  USB 3.5"-HDD          PQ: 0 ANSI: 4
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
bcache: register_bdev() registered backing device sda
BTRFS: device label Root devid 1 transid 14728 /dev/mapper/Root
BTRFS info (device dm-0): disk space caching is enabled
BTRFS info (device dm-0): has skinny extents
BTRFS info (device dm-0): detected SSD devices, enabling SSD mode
System time before build time, advancing clock.
systemd[1]: systemd 233 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL -XZ +LZ4 +SECCOMP +BLKID -)
systemd[1]: Detected architecture arm64.

Welcome to Gentoo/Linux!

systemd[1]: Set hostname to <odroidc2>.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Listening on RPCbind Server Activation Socket.
[  OK  ] Created slice system-systemd\x2dfsck.slice.
[  OK  ] Reached target Swap.
         Mounting Temporary Directory...
         Mounting NFSD configuration filesystem...
BTRFS info (device dm-0): use lzo compression
BTRFS info (device dm-0): enabling auto defrag
BTRFS info (device dm-0): disk space caching is enabled
[  OK  ] Listening on Process Core Dump Socket.
[  OK  ] Reached target Slices.
[  OK  ] Reached target Remote File Systems.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
[  OK  ] Reached target RPC Port Mapper.
         Starting Journal Service...
         Mounting Huge Pages File System...
         Starting Create list of required st��ce nodes for the current kernel...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
         Starting Apply Kernel Variables...
[  OK  ] Reached target Host and Network Name Lookups.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on Network Service Netlink Socket.
[  OK  ] Listening on udev Control Socket.
         Mounting POSIX Message Queue File System...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Mounted NFSD configuration filesystem.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted Temporary Directory.
[  OK  ] Started Journal Service.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Create list of required sta��…vice nodes for the current kernel.
[  OK  ] Started Apply Kernel Variables.
         Starting Load/Save Random Seed...
         Starting Create Static Device Nodes in /dev...
         Starting udev Coldplug all Devices...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /srv/nfs/portage...
         Mounting /srv/nfs/overlays...
         Mounting /srv/nfs/linux...
[  OK  ] Mounted /srv/nfs/portage.
[  OK  ] Mounted /srv/nfs/overlays.
[  OK  ] Mounted /srv/nfs/linux.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started udev Kernel Device Manager.
systemd-journald[163]: Received request to flush runtime journal from PID 1
[  OK  ] Found device /dev/ttyAML0.
usbcore: registered new interface driver uas
platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version
[drm] Initialized
PTP clock support registered
Registered IR keymap rc-empty
input: meson-ir as /devices/platform/soc/c8100000.aobus/c8100580.ir/rc/rc0/input0
rc rc0: meson-ir as /devices/platform/soc/c8100000.aobus/c8100580.ir/rc/rc0
meson-ir c8100580.ir: receiver initialized
libphy: Fixed MDIO Bus: probed
lirc_dev: IR Remote Control driver registered, major 247
rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
IR LIRC bridge handler initialized
meson-drm d0100000.vpu: Queued 2 outputs on vpu
meson8b-dwmac c9410000.ethernet: no reset control found
stmmac - user ID: 0x11, Synopsys ID: 0x37
meson8b-dwmac c9410000.ethernet: Ring mode enabled
meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
meson8b-dwmac c9410000.ethernet: Normal descriptors
meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
meson8b-dwmac c9410000.ethernet: COE Type 2
meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
libphy: stmmac: probed
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
If i get the time i could try to boot with HK u-boot

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Wed May 10, 2017 5:59 pm

OpenProgger wrote: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.[/code]
If i get the time i could try to boot with HK u-boot
Its seems there is some HDMI config in the hardkernel uboot but not in mainline uboot, see my log below. Its also interesting to note you are using an EFI boot.

- Note the uboot setup of HDMI and canvas
- Note the amount of available ram in my log below (some is defined for HDMI/ vpu or mali maybe

Code: Select all

GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:0;
TE: 116770
no sdio debug board detected 

BL2 Built : 11:44:26, Nov 25 2015. 
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from SD, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK. 
Run bl30...
Load bl301 from SD, src: 0x0001c200, des: 0x01000000, size: 0x000018c0
Wait bl30...Done
Sending bl301.......OK. 
Run bl301...
D, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: ef be adLoad bl33 from SD, src: 0x00034200, des: 0x01000000, size: 0x00073510
 de d f0 ad ba ef be ad de not ES chip
[0.231817 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01-00189-g205c7b3 (Feb 27 2017 - 10:53:13)

DRAM:  2 GiB
Relocation Offset is: 76f32000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFCD95D
MAC : 00:1e:06:33:25:dd
BID : HKC2211602
-------------------------------------------------
register usb cfg[1][0] = 0000000077f95058
register usb cfg[0][1] = 0000000077f95078
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f2ad30
aml_priv->desc_buf = 0x0000000073f2cec0
SDIO Port B: 0, SDIO Port C: 1
ret = 1 .[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 16 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 61024, count 2048 ... 2048 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0 
reading boot.ini
3261 bytes read in 4 ms (795.9 KiB/s)
cfgload: applying boot.ini...
cfgload: setenv bootrootfs "boot=/dev/mmcblk1p1 disk=/dev/mmcblk1p2 root=/dev/mmcblk1p2"
cfgload: setenv console "console=tty0 console=ttyAML0,115200n8"
cfgload: setenv odroid   "no_console_suspend consoleblank=0 loglevel=8 debug ro rootwait"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1896"  # 1.896GHz
cfgload: setenv kernel  "fatload mmc 0:1 0x1080000 uImage"
cfgload: setenv dtb     "fatload mmc 0:1 0x1000000 meson-gxbb-odroidc2.dtb"
cfgload: setenv bootseq "bootm 0x1080000 - 0x1000000"
cfgload: setenv bootcmd "${kernel}; ${dtb}; ${bootseq}"
cfgload: setenv bootargs "${console} ${bootrootfs} ${odroid} ${libreelec}"
cfgload: run bootcmd
reading uImage
11348544 bytes read in 535 ms (20.2 MiB/s)
reading meson-gxbb-odroidc2.dtb
18650 bytes read in 7 ms (2.5 MiB/s)
ee_gate_off ...
## Booting kernel from Legacy Image at 01080000 ...
   Image Name:   linux
   Image Type:   AArch64 Linux Kernel Image (uncompressed)
   Data Size:    11348480 Bytes = 10.8 MiB
   Load Address: 01080000
   Entry Point:  01080000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Kernel Image ... OK
   kernel loaded at 0x01080000, end = 0x01b52a00
   Loading Device Tree to 000000001fff8000, end 000000001ffff8d9 ... OK

Starting kernel ...

uboot time: 4014601 us
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.10.10 (odroid@odroid64) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #3 SMP PREEMPT Sat May 6 23:08:58 EDT 2017
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000006c400000, size 188 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] On node 0 totalpages: 486912
[    0.000000]   DMA zone: 7616 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 486912 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] percpu: Embedded 21 pages/cpu @ffff80006c381000 s48280 r8192 d29544 u86016
[    0.000000] pcpu-alloc: s48280 r8192 d29544 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 479296
[    0.000000] Kernel command line: console=tty0 console=ttyAML0,115200n8 boot=/dev/mmcblk1p1 disk=/dev/mmcblk1p2 root=/dev/mmcblk1p2 no_console_suspend consoleblank=0 loglevel=8 debug ro r 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 1707256K/1947648K available (7356K kernel code, 522K rwdata, 2668K rodata, 512K init, 381K bss, 47880K reserved, 192512K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff0000087b0000   (  7360 KB)
[    0.000000]     .rodata : 0xffff0000087b0000 - 0xffff000008a50000   (  2688 KB)
[    0.000000]       .init : 0xffff000008a50000 - 0xffff000008ad0000   (   512 KB)
[    0.000000]       .data : 0xffff000008ad0000 - 0xffff000008b52a00   (   523 KB)
[    0.000000]        .bss : 0xffff000008b52a00 - 0xffff000008bb1f4c   (   382 KB)
[    0.000000]     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
[    0.000000]               0xffff7e0000040000 - 0xffff7e0001e00000   (    29 MB actual)
[    0.000000]     memory  : 0xffff800001000000 - 0xffff800078000000   (  1904 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000201] Console: colour dummy device 80x25
[    0.000668] console [tty0] enabled
[    0.000689] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000709] pid_max: default: 32768 minimum: 301
[    0.000758] Security Framework initialized
[    0.000792] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000805] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.011992] ASID allocator initialised with 65536 entries
[    0.032068] EFI services will not be available.
[    0.048031] smp: Bringing up secondary CPUs ...
[    0.080710] Detected VIPT I-cache on CPU1
[    0.080747] CPU1: Booted secondary processor [410fd034]
[    0.112723] Detected VIPT I-cache on CPU2
[    0.112741] CPU2: Booted secondary processor [410fd034]
[    0.144755] Detected VIPT I-cache on CPU3
[    0.144772] CPU3: Booted secondary processor [410fd034]
[    0.144801] smp: Brought up 1 node, 4 CPUs
[    0.144861] SMP: Total of 4 processors activated.
[    0.144873] CPU features: detected feature: 32-bit EL0 Support
[    0.144913] CPU: All CPU(s) started at EL2
[    0.144932] alternatives: patching kernel code
[    0.145317] devtmpfs: initialized
[    0.147804] DMI not present or invalid.
[    0.147948] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.147973] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.151230] pinctrl core: initialized pinctrl subsystem
[    0.152001] NET: Registered protocol family 16
[    0.168813] cpuidle: using governor menu
[    0.169153] vdso: 2 pages (1 code @ ffff0000087b7000, 1 data @ ffff000008ad5000)
[    0.169178] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.169688] DMA: preallocated 256 KiB pool for atomic allocations
[    0.169751] Serial: AMBA PL011 UART driver
[    0.196599] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.198531] SCSI subsystem initialized
[    0.198638] libata version 3.00 loaded.
[    0.198822] usbcore: registered new interface driver usbfs
[    0.198860] usbcore: registered new interface driver hub
[    0.198901] usbcore: registered new device driver usb
[    0.199062] pps_core: LinuxPPS API ver. 1 registered
[    0.199073] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.199100] PTP clock support registered
[    0.199196] dmi: Firmware registration failed.
[    0.199377] Advanced Linux Sound Architecture Driver Initialized.
[    0.201034] clocksource: Switched to clocksource arch_sys_counter
[    0.201138] VFS: Disk quotas dquot_6.6.0
[    0.201179] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.205296] NET: Registered protocol family 2
[    0.205655] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.205754] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.205945] TCP: Hash tables configured (established 16384 bind 16384)
[    0.206013] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.206053] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.206172] NET: Registered protocol family 1
[    0.206394] RPC: Registered named UNIX socket transport module.
[    0.206406] RPC: Registered udp transport module.
[    0.206416] RPC: Registered tcp transport module.
[    0.206426] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.206884] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.207054] kvm [1]: 8-bit VMID
[    0.207065] kvm [1]: IDMAP page: 1799000
[    0.207075] kvm [1]: HYP VA range: 800000000000:ffffffffffff
[    0.207481] kvm [1]: Hyp mode initialized successfully
[    0.207515] kvm [1]: vgic-v2@c4304000
[    0.207568] kvm [1]: vgic interrupt IRQ1
[    0.207585] kvm [1]: virtual timer IRQ4
[    0.208992] audit: initializing netlink subsys (disabled)
[    0.209509] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.214591] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.215035] NFS: Registering the id_resolver key type
[    0.215062] Key type id_resolver registered
[    0.215072] Key type id_legacy registered
[    0.215086] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.215212] 9p: Installing v9fs 9p2000 file system support
[    0.216628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.216649] io scheduler noop registered
[    0.216790] io scheduler cfq registered (default)
[    0.217745] GPIO line 4 (usb-hub-reset) hogged as output/high
[    0.219816] xenfs: not registering filesystem on non-xen platform
[    0.222519] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.223535] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 12, base_baud = 1500000) is a meson_uart
[    0.971443] console [ttyAML0] enabled
[    0.979368] loop: module loaded
[    0.979838] hisi_sas: driver version v1.6
[    0.983109] libphy: Fixed MDIO Bus: probed
[    0.986608] tun: Universal TUN/TAP device driver, 1.6
[    0.991142] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.998479] meson8b-dwmac c9410000.ethernet: no reset control found
[    1.003483] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    1.008476] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[    1.014252] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[    1.021676] meson8b-dwmac c9410000.ethernet: Normal descriptors
[    1.027533] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[    1.034957] meson8b-dwmac c9410000.ethernet: COE Type 2
[    1.040125] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[    1.047114] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[    1.053515] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.061533] libphy: stmmac: probed
[    1.065583] VFIO - User Level meta-driver version: 0.3
[    1.070622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.076362] ehci-platform: EHCI generic platform driver
[    1.081619] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.087666] ohci-platform: OHCI generic platform driver
[    1.093100] usbcore: registered new interface driver usb-storage
[    1.099601] mousedev: PS/2 mouse device common for all mice
[    1.104681] i2c /dev entries driver
[    1.109214] sdhci: Secure Digital Host Controller Interface driver
[    1.113877] sdhci: Copyright(c) Pierre Ossman
[    1.118221] Synopsys Designware Multimedia Card Interface Driver
[    1.124805] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[    1.169248] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.169672] ledtrig-cpu: registered to indicate activity on CPUs
[    1.175614] meson-sm: secure-monitor enabled
[    1.180703] hidraw: raw HID events driver (C) Jiri Kosina
[    1.187318] usbcore: registered new interface driver usbhid
[    1.190499] usbhid: USB HID core driver
[    1.194423] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[    1.202205] NET: Registered protocol family 17
[    1.205566] 9pnet: Installing 9P2000 support
[    1.209763] Key type dns_resolver registered
[    1.214359] registered taskstats version 1
[    1.222862] c9000000.usb supply vusb_d not found, using dummy regulator
[    1.224404] c9000000.usb supply vusb_a not found, using dummy regulator
[    1.232098] phy phy-c0000000.phy.0: USB ID detect failed!
[    1.236290] phy phy-c0000000.phy.0: phy poweron failed --> -22
[    1.242467] dwc2: probe of c9000000.usb failed with error -22
[    1.248015] c9100000.usb supply vusb_d not found, using dummy regulator
[    1.254334] c9100000.usb supply vusb_a not found, using dummy regulator
[    1.381173] dwc2 c9100000.usb: DWC OTG Controller
[    1.381213] dwc2 c9100000.usb: new USB bus registered, assigned bus number 1
[    1.387248] dwc2 c9100000.usb: irq 33, io mem 0x00000000
[    1.392630] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.399222] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.406383] usb usb1: Product: DWC OTG Controller
[    1.411035] usb usb1: Manufacturer: Linux 4.10.10 dwc2_hsotg
[    1.416641] usb usb1: SerialNumber: c9100000.usb
[    1.421543] hub 1-0:1.0: USB hub found
[    1.424928] hub 1-0:1.0: 1 port detected
[    1.429397] meson-gx-mmc d0072000.mmc: Got CD GPIO
[    1.474531] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version
[    1.480419] hctosys: unable to open rtc device (rtc0)
[    1.480907] VCC1V8: disabling
[    1.483469] VCC3V3: disabling
[    1.486396] USB_OTG_PWR: disabling
[    1.489765] ALSA device list:
[    1.492684]   No soundcards found.
[    1.501695] Waiting for root device /dev/mmcblk1p2...
[    1.656397] mmc1: new high speed SDHC card at address 59b4
[    1.656707] mmcblk1: mmc1:59b4       14.9 GiB 
[    1.661395]  mmcblk1: p1 p2
[    1.677829] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[    1.684961] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
[    1.687740] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.698332] devtmpfs: mounted
[    1.698548] Freeing unused kernel memory: 512K
[    1.742192] random: fast init done
[    1.817065] usb 1-1: new high-speed USB device number 2 using dwc2
[    2.026335] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    2.027402] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.034480] usb 1-1: Product: USB2.0 Hub
[    2.038893] hub 1-1:1.0: USB hub found
[    2.042347] hub 1-1:1.0: 4 ports detected
[    3.074499] systemd[1]: System time before build time, advancing clock.
[    5.501947] NET: Registered protocol family 10
[    5.502522] Segment Routing with IPv6
[    5.591356] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct.
[    5.595980] systemd[1]: Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices.
[    5.605086] systemd[1]: Mounting cgroup to /sys/fs/cgroup/pids of type cgroup with options pids.
[    5.613762] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset.
[    5.622881] systemd[1]: Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio.
[    5.631708] systemd[1]: Mounting cgroup to /sys/fs/cgroup/hugetlb of type cgroup with options hugetlb.
[    5.640940] systemd[1]: Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory.
[    5.650180] systemd[1]: Mounting cgroup to /sys/fs/cgroup/perf_event of type cgroup with options perf_event.
[    5.659741] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFU)
[    5.677724] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 16.04.2 LTS!

[    5.725480] systemd-getty-generator[948]: Automatically adding serial getty for /dev/ttyAML0.
[    5.805374] systemd-rc-local-generator[951]: Automatically adding rc-local.service.
[    5.899753] systemd-fstab-generator[950]: Parsing /etc/fstab
[    5.905019] systemd-gpt-auto-generator[949]: /dev/mmcblk1p2: root device /dev/mmcblk1.
[    5.913112] systemd-sysv-generator[958]: Looking for unit files in (higher priority first):
[    5.915922] systemd-sysv-generator[958]:     /etc/systemd/system
[    5.921616] systemd-sysv-generator[958]:     /run/systemd/system
[    5.921732] systemd-fstab-generator[950]: Found entry what=/dev/disk/by-label/boot where=/media/boot type=vfat nofail=no noauto=no
[    5.921990] systemd-fstab-generator[950]: Found entry what=/dev/disk/by-uuid/e139ce78-9841-40fe-8823-96a304a09859 where=/ type=ext4 nofail=no noauto=no
[    5.952412] systemd-sysv-generator[958]:     /usr/local/lib/systemd/system
[    5.958957] systemd-sysv-generator[958]:     /lib/systemd/system
[    5.964649] systemd-sysv-generator[958]:     /usr/lib/systemd/system
[    5.970704] systemd-sysv-generator[958]: Looking for SysV init scripts in:
[    5.977501] systemd-sysv-generator[958]:     /etc/init.d
[    5.982502] systemd-sysv-generator[958]: Looking for SysV rcN.d links in:
[    5.989228] systemd-sysv-generator[958]:     /etc
[    6.405515] random: crng init done
[    6.644347] systemd-gpt-auto-generator[949]: /dev/mmcblk1: not a GPT partition table, ignoring.
[    6.897781] systemd-sysv-ge: 217 output lines suppressed due to ratelimiting
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on fsck to fsckd communication Socket.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Reached target User and Group Name Lookups.
[  OK  ] Listening on Journal Socket.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Reached target Swap.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Started Trigger resolvconf update for networkd DNS.
[  OK  ] Created slice System Slice.
[  OK  ] Reached target Slices.
         Starting Load Kernel Modules...
[  OK  ] Started Read required files in advance.
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Mounting Huge Pages File System...
         Starting Set console keymap...
         Starting Create list of required st... nodes for the current kernel...
[  OK  ] Started Braille Device Support.
         Mounting POSIX Message Queue File System...
         Mounting Debug File System...
         Starting Nameserver information manager...
         Starting LSB: controls configuration of serial ports...
         Starting File System Check on Root Device...
         Starting Uncomplicated firewall...
[  OK  ] Listening on Journal Socket (/dev/log).
         Starting Journal Service...
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
         Mounting Configuration File System...
         Starting Apply Kernel Variables...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Uncomplicated firewall.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started File System Check Daemon to report status.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Configuration File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Started Nameserver information manager.
[  OK  ] Reached target Network (Pre).
[  OK  ] Started Set console keymap.
[  OK  ] Started Journal Service.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started LSB: controls configuration of serial ports.
[  OK  ] Started File System Check on Root Device.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting udev Coldplug all Devices...
[  OK  ] Reached target Local File Systems (Pre).
         Starting Load/Save Random Seed...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Found device /dev/ttyAML0.
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /dev/disk/by-label/boot.
         Mounting /media/boot...
[  OK  ] Mounted /media/boot.
[  OK  ] Reached target Local File Systems.
         Starting Set console font and keymap...
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Create Volatile Files and Directories...
         Starting LSB: AppArmor initialization...
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started LSB: AppArmor initialization.
         Starting Raise network interfaces...
[  OK  ] Started Set console font and keymap.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
         Starting Socket activation for snappy daemon.
[  OK  ] Started CUPS Scheduler.
[  OK  ] Reached target Paths.
[  OK  ] Started Daily apt activities.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Timer to automatically refresh installed snaps.
[  OK  ] Reached target Timers.
[  OK  ] Listening on CUPS Scheduler.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on Socket activation for snappy daemon.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting System Logging Service...
         Starting Login Service...
         Starting Restore /etc/resolv.conf i...re the ppp link was shut down...
[  OK  ] Started Avahi DNS Configuration Daemon.
[  OK  ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting controls configuration of serial ports...
         Starting Modem Manager...
         Starting Initialize hardware monitoring sensors...
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
         Starting Accounts Service...
[  OK  ] Started Run anacron jobs.
[  OK  ] Started Snappy daemon.
[  OK  ] Started Regular background program processing daemon.
         Starting Auto import assertions from block devices...
         Starting Network Manager...
         Starting LSB: Load kernel modules needed to enable cpufreq scaling...
         Starting Save/Restore Sound Card State...
[  OK  ] Started crash report submission daemon.
         Starting Run Click system-level hooks...
         Starting LSB: automatic crash report generation...
         Starting LSB: Starts LIRC daemon....
[  OK  ] Started Cgroup management daemon.
         Starting LSB: Speech Dispatcher...
         Starting Initializes zram swaping...
[  OK  ] Started CUPS Scheduler.
[  OK  ] Started Make remote CUPS printers available locally.
         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
         Starting Permit User Sessions...
[  OK  ] Started System Logging Service.
[  OK  ] Started Restore /etc/resolv.conf if...fore the ppp link was shut down.
[  OK  ] Started Auto import assertions from block devices.
[  OK  ] Started LSB: Speech Dispatcher.
[  OK  ] Started Initialize hardware monitoring sensors.
[  OK  ] Started Save/Restore Sound Card State.
[  OK  ] Started Raise network interfaces.
[FAILED] Failed to start Initializes zram swaping.
See 'systemctl status zram-config.service' for details.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started LSB: Starts LIRC daemon..
[  OK  ] Started LSB: automatic crash report generation.
[  OK  ] Started Login Service.
         Starting Authenticate and Authorize Users to Run Privileged Tasks...
         Starting Light Display Manager...
[  OK  ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[  OK  ] Started controls configuration of serial ports.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[  OK  ] Started Accounts Service.
[  OK  ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
         Starting LSB: set CPUFreq kernel parameters...
[  OK  ] Started LSB: set CPUFreq kernel parameters.
[  OK  ] Started Light Display Manager.
[  OK  ] Started Network Manager.
         Starting Network Manager Wait Online...
[  OK  ] Reached target Network.
[  OK  ] Started Unattended Upgrades Shutdown.
         Starting OpenBSD Secure Shell server...
         Starting Network Manager Script Dispatcher Service...
[  OK  ] Started Modem Manager.
[  OK  ] Started Network Manager Script Dispatcher Service.
         Starting Hostname Service...
[  OK  ] Started Hostname Service.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started Network Manager Wait Online.
[  OK  ] Reached target Network is Online.
         Starting LSB: disk temperature monitoring daemon...
         Starting /etc/rc.local Compatibility...
         Starting LSB: Start NTP daemon...
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started LSB: disk temperature monitoring daemon.
         Starting Hold until boot process finishes up...
[  OK  ] Started Hold until boot process finishes up.
         Starting Set console scheme...
[  OK  ] Started Getty on tty1.
[  OK  ] Started Serial Getty on ttyAML0.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Set console scheme.
[  OK  ] Started LSB: Start NTP daemon.

Ubuntu 16.04.2 LTS odroid64 ttyAML0

odroid64 login: 

OpenProgger
Posts: 7
Joined: Sat Apr 29, 2017 2:58 am
languages_spoken: english,german
ODROIDs: Odroid C2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by OpenProgger » Thu May 11, 2017 8:23 am

I use the EFI boot because it doesn't need a boot.scr. It autoboots at /efi/boot/bootaa64.efi and i use only one kernel for my c2.
I tried to boot HK uboot but it hangs at kernel booting(even with disabled UEFI in kernel, uboot mainline works with same commands) :/
Doesn't matter if as Image(pure kernel) or uImage(generated with mkimage). I try to disable some kernel features that might make problems for older uboot.
Otherwise i have to wait until uboot get the required HDMI code mainlined.

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Thu May 11, 2017 9:11 am

OpenProgger wrote:I use the EFI boot because it doesn't need a boot.scr. It autoboots at /efi/boot/bootaa64.efi and i use only one kernel for my c2.
I tried to boot HK uboot but it hangs at kernel booting(even with disabled UEFI in kernel, uboot mainline works with same commands) :/
Doesn't matter if as Image(pure kernel) or uImage(generated with mkimage). I try to disable some kernel features that might make problems for older uboot.
Otherwise i have to wait until uboot get the required HDMI code mainlined.
With hardkernel uboot you will need to use boot.ini and uImage as hardkernel uses a modified entry point to the kernel and ttyS0 console by default. It also does not support efi but its not a problem for the support to exist in the kernel

Edit:
Example uboot.ini file here to use uImage, note the console parameters being passed to the 4.10 kernel http://repo.builtonline.net/testing/cus ... g/boot.ini

the mkimage command to create the uImage (using hardkernel uboot specific entry point) will be something like this

EDIT***(18/0617) - I had the incorrect entry point and load address, correct is 0x1080000 which I have updated......

Code: Select all

$ mkimage -A arm64 -O linux -C none -T kernel -a 0x1080000 -e 0x1080000 -n 4.10.10-custom -d Image uImage 
or refer to the very first post in this thread
Last edited by brad on Sun Jun 18, 2017 8:24 am, edited 1 time in total.

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Thu May 11, 2017 8:44 pm

In the past 24 hours seeing the new clock support being introduced into linux-next for S905 audio system and mali graphics.

Im particularly interested in the audio work being done for meson to support the i2s, SPDIF, PCM & HDMI interfaces so I can attempt to interface through a custom board design to higher end audio codecs such as the Texas Instruments PCM3169A, Analog Devices AD1937 or maybe other options.

I think for 4.12 odroid C2 will almost be fully supported on all aspects with the exception of mali which will require some intensive work by experts in the future to rewrite the current user-space drivers to support high end hardware graphics. Others in this forum (including hardkernel) might be able to comment on the difficultly, resources and possibility of this happening in the near future. Although hardware graphics is not a huge priority of mine it would be very nice and considering the level of expertise required and I would consider donating to a community open source development if it were to occur. What are the thoughts of others and how likely are we to see hard-kernel continuing to produce C2's or improved versions of the C2 in the future?

redhad
Posts: 20
Joined: Wed May 03, 2017 10:58 pm
languages_spoken: english, german, russian, french
ODROIDs: C2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by redhad » Thu May 11, 2017 9:54 pm

What about viewtopic.php?f=135&t=26969#p189636?

The HiKey Board has a Mali 450 MP4, and the Mali drivers are provided by ARM itself on their developer site: https://developer.arm.com/products/soft ... user-space.

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Thu May 11, 2017 10:00 pm

redhad wrote:What about viewtopic.php?f=135&t=26969#p189636?

The HiKey Board has a Mali 450 MP4, and the Mali drivers are provided by ARM itself on their developer site: https://developer.arm.com/products/soft ... user-space.
Thank you for bringing that post to my attention, I shall eagerly await Hard kernels response!

User avatar
odroid
Site Admin
Posts: 31799
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 86 times
Been thanked: 242 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by odroid » Thu May 11, 2017 10:14 pm

After fixing some issues on XU4 Kernel 4.9 for several weeks, we will check the feasibility of Mali450 GPU bring-up on C2 Kernel 4.12.
Because of very limited resources, we can't support two platforms in parallel. Please understand our situation.

Do you think we can meet Kernel 4.12 in early July?

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Thu May 11, 2017 10:20 pm

odroid wrote:After fixing some issues on XU4 Kernel 4.9 for several weeks, we will check the feasibility of Mali450 GPU bring-up on C2 Kernel 4.12.
Because of very limited resources, we can't support two platforms in parallel. Please understand our situation.

Do you think we can meet Kernel 4.12 in early July?
I think it is well on the way, thank you for looking into this. Neil Armstrong would be a good person to answer this question and it looks like it will be more clear in a week or so. The target release is 4.12

Holzhaus
Posts: 163
Joined: Sat Jan 31, 2015 3:12 am
languages_spoken: english, german
ODROIDs: C1 (running ArchLinux ARM)
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by Holzhaus » Sat May 13, 2017 8:22 pm

I was wondering: How is hardware video decoding support in mainline? Couldn't find info if the VPU drIver has already been ported or reimplemented...

hhh1
Posts: 46
Joined: Wed Jun 15, 2016 3:35 am
languages_spoken: english
ODROIDs: c1 c1+ c2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by hhh1 » Sun May 14, 2017 4:27 am

Can somebody please tell me how to boot 4.x without boot partition?
My 3.x config is

Code: Select all

setenv bootargs "root=/dev/mmcblk0p1 rootwait rw ${condev} no_console_suspend cec=${cec} hdmimode=${m} ${cmode} m_bpp=
${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${max
cpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam
} serialno=${fbt_id#}"
setenv loadaddr "0x11000000"
setenv dtb_loadaddr "0x1000000"
setenv initrd_loadaddr "0x13000000"
load mmc 0:1 ${loadaddr} /boot/Image
load mmc 0:1 ${dtb_loadaddr} /boot/dtbs/meson64_odroidc2.dtb
fdt addr ${dtb_loadaddr}
load mmc 0:1 ${initrd_loadaddr} /boot/initramfs-linux.img
booti ${loadaddr} ${initrd_loadaddr}:${filesize} ${dtb_loadaddr}

User avatar
rooted
Posts: 6588
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 88 times
Been thanked: 17 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by rooted » Sun May 14, 2017 5:41 am

You mean your kernel and boot.ini reside on the same OS ext4 partition in /boot folder instead of /boot being a separate vfat partition?

hhh1
Posts: 46
Joined: Wed Jun 15, 2016 3:35 am
languages_spoken: english
ODROIDs: c1 c1+ c2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by hhh1 » Sun May 14, 2017 8:29 am

rooted wrote:You mean your kernel and boot.ini reside on the same OS ext4 partition in /boot folder instead of /boot being a separate vfat partition?
yes, and it's working fine.

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Sun May 14, 2017 9:10 am

Holzhaus wrote:I was wondering: How is hardware video decoding support in mainline? Couldn't find info if the VPU drIver has already been ported or reimplemented...
- VPU DRM display driver was implemented with CVBS output, HDMI encoder support is targeted for 4.12. (A working in development version posted above)
- GPU (Mali) kernel driver has been written and is working its way through development tree as well targeted for 4.12, this will also require userspace mali drivers but further work is required.

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Sun May 14, 2017 9:21 am

hhh1 wrote:Can somebody please tell me how to boot 4.x without boot partition?
My 3.x config is

Code: Select all

setenv bootargs "root=/dev/mmcblk0p1 rootwait rw ${condev} no_console_suspend cec=${cec} hdmimode=${m} ${cmode} m_bpp=
${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${max
cpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam
} serialno=${fbt_id#}"
setenv loadaddr "0x11000000"
setenv dtb_loadaddr "0x1000000"
setenv initrd_loadaddr "0x13000000"
load mmc 0:1 ${loadaddr} /boot/Image
load mmc 0:1 ${dtb_loadaddr} /boot/dtbs/meson64_odroidc2.dtb
fdt addr ${dtb_loadaddr}
load mmc 0:1 ${initrd_loadaddr} /boot/initramfs-linux.img
booti ${loadaddr} ${initrd_loadaddr}:${filesize} ${dtb_loadaddr}
You must use a uImage format rather than Image as the hardkernel uboot loads from a different entry point to the mainline kernel.

See the following for uImage example http://repo.builtonline.net/testing/cus ... g/boot.ini

For your purposes you would need to change the fatload commands to either "extload" or maybe "load mmc"

There is an example a few posts above for using mkimage to create the uImage from the Image file.

umiddelb
Posts: 451
Joined: Thu Jan 29, 2015 6:42 am
languages_spoken: English, German
ODROIDs: ODROID-C1, ODROID-XU4, ODROID-C2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by umiddelb » Sun May 14, 2017 5:31 pm

I'm very happy to see that 4.12-rc1 has fixed the USB and mmc related issues, no further patching seems to be required anymore.

I've still added some minor patches to ensure networking stability and cpufreq support. You can build your kernel from source using the gx_defconfig or try the precompiled image.

Cheers
Uli

brad
Posts: 957
Joined: Tue Mar 29, 2016 1:22 pm
languages_spoken: english
ODROIDs: C2 N1 N2 H2 (64 bit ftw)
Location: Australia
Has thanked: 14 times
Been thanked: 30 times
Contact:

Re: Odroid C2 mainline kernel support

Unread post by brad » Sun May 14, 2017 9:08 pm

umiddelb wrote:I'm very happy to see that 4.12-rc1 has fixed the USB and mmc related issues, no further patching seems to be required anymore.

I've still added some minor patches to ensure networking stability and cpufreq support. You can build your kernel from source using the gx_defconfig or try the precompiled image.

Cheers
Uli
Thanks Uli, I will have to try it out, have you noticed an improvement in mmc / sd speeds?

umiddelb
Posts: 451
Joined: Thu Jan 29, 2015 6:42 am
languages_spoken: English, German
ODROIDs: ODROID-C1, ODROID-XU4, ODROID-C2
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by umiddelb » Mon May 15, 2017 4:12 pm

brad wrote: Thanks Uli, I will have to try it out, have you noticed an improvement in mmc / sd speeds?
You're welcome.

I can run some perf tests (which tests do you run?) to see if speed has improved as well, but first of all I got rid of kernel oops, hangs, etc.

Cheers
Uli

moon.linux
Posts: 1165
Joined: Thu Oct 02, 2014 11:42 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C2 mainline kernel support

Unread post by moon.linux » Mon May 15, 2017 6:03 pm

Thanks @brad.
How can we compile and integrate mali driver with for Odroid C2 mainline.

I have tried to build 4.12-rc1 for odroid c2.

Post Reply

Return to “General Topics”

Who is online

Users browsing this forum: No registered users and 1 guest