[OS] ODROID GameStation Turbo with Kodi for C1

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Tue Nov 24, 2015 8:25 am

normally means a firmware is missing, since the Kernels should be nearly the same.
So the Kernel should not be the issue.
That's why I said you should check logs, and the other things.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

Jojo
Posts: 524
Joined: Mon May 18, 2015 12:13 am
languages_spoken: english, german
ODROIDs: C1, C1+, C2, HC1, HC2, VU8C
Location: Germany
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by Jojo » Wed Dec 16, 2015 11:43 pm

This looks very interesting. I will definitely give it a try!
Could you please tell me, just for information: why isn't it possible to just have the ROMs and by double-clicking the ROM, the corresponding core and the game will be started? Or is it possible?
And how will updates be handled? Let's say HK drings out a new USB driver for their official distro, will it merged into this distro, too?

One more thing: maybe it would make sense to move this thread into the "Other OS" section ;) .

Greetings and thank you!
How to ask questions the smart way:
http://www.catb.org/esr/faqs/smart-questions.html

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Thu Dec 17, 2015 2:43 am

Jojo wrote:This looks very interesting. I will definitely give it a try!
Could you please tell me, just for information: why isn't it possible to just have the ROMs and by double-clicking the ROM, the corresponding core and the game will be started? Or is it possible?
Technically it would be possible, but it's a lot of configuration. Also a lot of different emulators use the same file extensions (for example .bin or .zip) and there wouldn't be a way to determine which one is what.
Jojo wrote:And how will updates be handled? Let's say HK drings out a new USB driver for their official distro, will it merged into this distro, too?
Yes, I build Kernel and Headers myself and merge changes from HardKernel into them.
I build a lot more packages than that and update them regulary as well.
Jojo wrote:One more thing: maybe it would make sense to move this thread into the "Other OS" section ;) .

Greetings and thank you!
I started this project about 3 years ago as a project for the ODROID U2 and ported it to many ODROIDs by now X, X2, U2/U3, XU3/XU4 and C1. Since the first entry was setup as a project I used the same forum for all others as well.
But yes, there could have been better places to place this image to draw more attention. :)
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

Jojo
Posts: 524
Joined: Mon May 18, 2015 12:13 am
languages_spoken: english, german
ODROIDs: C1, C1+, C2, HC1, HC2, VU8C
Location: Germany
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by Jojo » Thu Dec 17, 2015 6:08 pm

@meveric
Thanky for your reply! I was searching for an image, that would cover all my needs:
- normal desktop-based Linux for stuff like media server, automated backups, Ambilight...
- Kodi for watching movies
- possibility to play retro games

Until now I was running HKs official distro for "general" stuff and Lakka on another SBC for gaming. But now it looks to me as if here is a distro, that combines everything :) ! Could you carefully confirm this?
Is my idea about this distro correct, that it is basically an official HK image, where you have added things?
Does IR work and do you have integrated the FIQ-SPI driver?

Sorry for asking these noob-like questions... I just want to be sure, before changing to another OS and go through the whole setup process... again!

Thanks!
How to ask questions the smart way:
http://www.catb.org/esr/faqs/smart-questions.html

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Fri Dec 18, 2015 3:43 am

Jojo wrote:Until now I was running HKs official distro for "general" stuff and Lakka on another SBC for gaming. But now it looks to me as if here is a distro, that combines everything :) ! Could you carefully confirm this?
Yes, the image was created for that purpose, it's an entertainment image, with a full desktop environment for many different purposes, like listen to music, writing letters, browsing the web, basically everything that you would expect from a standard desktop image, but it's also a multi media image with Kodi as a frontend to watch movies and play games. It was originally designed as a gaming image for kids, very save and easy to use, fully controlable just by using a gamepad (XBox360 controller for example).
Although the image itself was made for it, I personally think the C1 is not a good device to use it as such. The little RAM and rather slow CPU is often a show stopper compared to other ODROID products and with the many issues that the C1 has (USB drivers, graphics drivers, SD card support, etc.) it's my least favorite ODROID device.
Jojo wrote:Is my idea about this distro correct, that it is basically an official HK image, where you have added things?
No, not at all. It's a Debian Jessie image (HK uses Ubuntu) with many custom made programs and a very large repository for programs compiled directly for ODROIDs. (Check the HOWTO link in my signature to find a list of the available packages - mostly games)
Jojo wrote:Does IR work and do you have integrated the FIQ-SPI driver?
Not out of the box, but the guides from HardKernel should work just fine on this image. It uses a similar Kernel as HardKernel and therefore supports all that HK supports (and more).
Jojo wrote:Sorry for asking these noob-like questions... I just want to be sure, before changing to another OS and go through the whole setup process... again!

Thanks!
It's ok to ask questions. Feel free to ask whatever you'd like to know.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

Jojo
Posts: 524
Joined: Mon May 18, 2015 12:13 am
languages_spoken: english, german
ODROIDs: C1, C1+, C2, HC1, HC2, VU8C
Location: Germany
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by Jojo » Fri Dec 18, 2015 5:27 pm

meveric wrote: It's ok to ask questions. Feel free to ask whatever you'd like to know.
Thanks alot! You clarified most things and the rest will occur during use ;) .

ATM I am very busy to tidy up my new home, but as soon as all boxes are empty, I will definitely give it a try!

Greetings
How to ask questions the smart way:
http://www.catb.org/esr/faqs/smart-questions.html

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Sat Jan 02, 2016 8:50 pm

Hello, I'm French, newbie in Odroid, I come from Raspberry Pi.First of all, congrats for the image which seems to be very cool : desktop, Kodi and games, unfortunetly i've tried to install "Gamestation" but i've got an error after the second boot : It boot, starts, I see the nice desktop but after the reboot (for resize the card I think) the error appears :

Code: Select all

don't set the same mode as current
emmc: mmc_reason_try_freq: trying to init card at 300000Hz
aml_emmc_hw_reset 1379
When I restart everytime I don't see the desktop, error appears directly; I saw the desktop just one time (the first boot).
All systems I ve flashed before are working (android, ubuntu, debian) perfectly but this one and Odrobian give me the same error.; perhaps anyone have an idea to help me.
I saw on the Odrobian discussion (first page) that a guy (sam-williams) had the same problem...
I post here and on the Odrobian discussion for help.
Thanks for all and Happy new year !

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Sat Jan 02, 2016 8:53 pm

I forgot : I'm on Odroid C1+, I've tried to disabled "setnev disable-uhs" in the boot.ini without succes, reflash the card three times and my screen is this one : https://shop.pimoroni.com/products/hdmi ... it-800-600
Sorry.

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Sat Jan 02, 2016 9:48 pm

Same as it was said on the "Odroibian" topic it looks like you have an incompatible SD card.
Most SanDisk SD cards seem to work fine on ODROID C1. It's one of the many issues the C1 has.
But it's rather interesting, that you say it's working on android and Ubuntu.
I don't have any of these SD cards that are not working, so it's hard for me to figure out what could help as a solution.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Sat Jan 02, 2016 10:02 pm

Thanks for answer, ok I'll try soon with another card but I don't understand why too cause this card works with another distro like I said, Mystery !!!
I'll do that and I'll post my report.
I really want to try your distro meveric and hope it will be ok 4 me.
See you soon.

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Sun Jan 03, 2016 9:55 am

Update:
(No new image this time)
This update is mainly to bring emulators and frontends up to date as well as adding some new emulators.
I updated all cores with their current versions and updated the retroarch-cores-good and retroarch-cores-bad packages.
Some of the cores got a little extra speed compared to the older version (for example the picodrive core for SEGA 32X, and other SEGA Consoles)
With now a total of 74 working cores on the ODROIDs.
37 are used with this image, another 37 can be downloaded via the retroarch-cores-bad package; Including different types of MAME emulators (mame2000 aka 037b5, mame2003 aka 078, mame2010 aka 139, mame2014 aka 159, as well as 151 and 152 from about a year ago), different types of SNES and GBA emulator cores, that you can easily switch with the ones used by this image, in case you need faster cores, or other features provided by the cores. There are also some cores for doom and quake1 (hardware accelerated through OpenGL ES) or even cores to watch videos and images, or 3D models.

New Cores:
Following cores and systems are new:

Code: Select all

System             Emulator used      Where to put ROMS                    Format of ROMS
AMSTRAD CPC        retroarch          /home/odroid/ROMS/CPC                *.dsk,*.sna
ATARI 7800         retroarch          /home/odroid/ROMS/ATARI/A7800        *.a78,*.bin
FB Alpha           retroarch          /home/odroid/ROMS/FBA                *.zip,*.iso
Game and Watch     retroarch          /home/odroid/ROMS/GW                 *.mgw
ZX81               retroarch          /home/odroid/ROMS/ZX81               *.tzx,*.p
ZX Spectrum        retroarch          /home/odroid/ROMS/ZXSpectr           *.tzx,*.tap,*.z80,*.rzx,*.scl,*.trd
Changed Cores:
I replaced PCSX_reARMed with the new pcsx1 core which seems to be better optimized for ARM and gives better performance for PS1 emulation.

Other new things:
I also updated retroarch to its current development branch (I'm not satisfied with the UI experience).
Together with retroarch package I updated many additional parts, such as the autoconfiguration for controllers, the assets for the different types of GUIs for retroarch, audio and video filters and more stuff.
I also replaced the old .cg shaders (which do not work on ODROIDs since they are for OpenGL) with .glsl shaders (for OpenGL ES) and made some of them available for you to cycle through shader next and previous keys ("m" and "n" key on the keyboard). Other shaders can be loaded via presets from within retroarch (be careful some of the shaders are still too demanding for ODROIDs).


All new packages and configurations are deployed via normal update procedures

Code: Select all

apt-get update && apt-get upgrade && apt-get dist-upgrade
Have fun with the new / updated features.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

tekn0
Posts: 10
Joined: Fri Oct 16, 2015 7:28 am
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by tekn0 » Sun Jan 03, 2016 2:36 pm

nice one meveric!

Any chance of adding retrofe as a front end with fbdev?

Also is there a fbdev version of this image? If so how is the n64 and shader performance in retroarch with the fbdev drivers?

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Sun Jan 03, 2016 5:19 pm

right now there is no fbdev version of this image.. but there might be in the future.

I haven't had time to check on retrofe again, but I'll probably do that in the next couple days again.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

tekn0
Posts: 10
Joined: Fri Oct 16, 2015 7:28 am
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by tekn0 » Mon Jan 04, 2016 2:45 am

meveric wrote:right now there is no fbdev version of this image.. but there might be in the future.

I haven't had time to check on retrofe again, but I'll probably do that in the next couple days again.
Thanks for the updates. :)

Jojo
Posts: 524
Joined: Mon May 18, 2015 12:13 am
languages_spoken: english, german
ODROIDs: C1, C1+, C2, HC1, HC2, VU8C
Location: Germany
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by Jojo » Mon Jan 04, 2016 5:25 pm

Hi meveric,

Thank you for this great image :) ! I had time to play with it last weekend and it looked promising to me!

At the beginning I stepped into the same problems as kolkovrok ("aml_emmc_hw_reset 1379"), but I solved it by myself with another SD card.

One "bad" thing I noticed was the well known screen blanks problem. This was widely spread on the C1 until an update around May/June 2015 (sry, I don't remember the version number...).
Did you, meveric, or anyone else also notice this?

I could also need some help to compile my beloved ambilight program "hyperion". This worked w/o any problems on the official Ubuntu release. But on the Debian, the compile process complains about missing/unset variables. Would you like to help we with that? If yes we could switch to PMs to not litter up this thread ;) .

And where do I set program to autostart? On the official release, there is a file "/home/odroid/.config/lxsession/LXDE/autostart", that I used. How does it work here?

Thanky a lot!
How to ask questions the smart way:
http://www.catb.org/esr/faqs/smart-questions.html

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Tue Jan 05, 2016 1:44 am

Jojo wrote:Hi meveric,

Thank you for this great image :) ! I had time to play with it last weekend and it looked promising to me!

At the beginning I stepped into the same problems as kolkovrok ("aml_emmc_hw_reset 1379"), but I solved it by myself with another SD card.
Yes, that's sadly a very common issue with the C1. Especially under Debian it seems. Some people reported it works better with Ubuntu, but I don't have issues like this with my SD cards (I only have SanDisk atm). So it's very hard to debug this issue and to try to find a solution for this (if it's even possible at all)
Jojo wrote:One "bad" thing I noticed was the well known screen blanks problem. This was widely spread on the C1 until an update around May/June 2015 (sry, I don't remember the version number...).
Did you, meveric, or anyone else also notice this?
To be honest, I never heard of it up to now, and I don't follow developments around C1 that much. The current Kernel is from Nov. 2015, so if it was a fix in the Kernel it should be included. If it was a fix in the libMali.so then I might have to check out the newer version of it and upload a new mali450-odroid package, which doesn't take long. Do you know what solved that issue?
Jojo wrote:I could also need some help to compile my beloved ambilight program "hyperion". This worked w/o any problems on the official Ubuntu release. But on the Debian, the compile process complains about missing/unset variables. Would you like to help we with that? If yes we could switch to PMs to not litter up this thread ;) .
Sure go ahead and send me a PM for it. I can add it to my repository when we figured out how to compile it, so everyone can use it if they want to :)
Jojo wrote:And where do I set program to autostart? On the official release, there is a file "/home/odroid/.config/lxsession/LXDE/autostart", that I used. How does it work here?
Couple of different and more easy ways than on Ubuntu. The two easierst ways are:
1. add a .desktop file of the program you want to add to autostart to /home/odroid/.config/autostart
Every .desktop file that's in there will be started when the user logs into the desktop.
2. Use the Control Center and search for Autostart Programs and add the program there (it will create a .desktop file in the autostart folder)
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

Jojo
Posts: 524
Joined: Mon May 18, 2015 12:13 am
languages_spoken: english, german
ODROIDs: C1, C1+, C2, HC1, HC2, VU8C
Location: Germany
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by Jojo » Tue Jan 05, 2016 5:11 am

Hi meveric and thanks a lot for the reply!

@screen blanks:
I had a PM conversation with tobetter about that during the development/testing process. I will ask him what exactly had changed. I think it was something regarding the HDMI clock frequency... It was a really wide spread issue until middle of last year, and it is really annoying. If I remember correctly, the reason was a handshake problem.

@autostart
ok, that sound not too complicated. I will read about .desktop files :) .

@hyperion
ok, cool. Thank you in advance! I just made a screenshot of the compile try. I will send you a PM :) .

Cheers!
How to ask questions the smart way:
http://www.catb.org/esr/faqs/smart-questions.html

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Tue Feb 09, 2016 10:31 pm

Hi ! I'm trying to use a wireless keyboard (K230) from logitech and his "unifying" receiver, unfortunately it doesn't works, the C1+ don't boot or restart every time (if I plug the dongle when I have the desktop).
I tried under official ubuntu and it works, so I made some reshearch on this forum and I found this : https://pwr.github.io/Solaar/ or this : https://github.com/mlinuxguy/odroid-c1- ... itech-dj.c
perhaps there is another solution or users wich had the same problems in the past on this distribution and I would like to know what will be the best process to accomplish before starting, so I ask...
Thank you ;)

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Tue Feb 09, 2016 10:58 pm

since the Kernel for Ubuntu and Debian are nearly identical, that shouldn't be the issue.
Can you check what modules are loaded when you plug in the receiver on Ubuntu and on Debian?
lsmod before and after plug in in the receiver.
Also check dmesg outputs before and after connecting the receiver as well.
If you could post the output here I could try looking into it.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Tue Feb 09, 2016 11:50 pm

Ok thanks for very fast answer.
I'll do this in two times, here the first for ubuntu (lubuntu in fact) an after I'll restart under your distro but I'm not sure if I can have the outputs you want with the receiver plugged cause it crash immediatly...

lsmod lsmod usb ubuntu with dongle unplugged :

Code: Select all

lsmod
Module                  Size  Used by
uinput                  6669  1 
ir_rc6_decoder          2024  0 
ir_sanyo_decoder        1638  0 
ir_lirc_codec           4243  3 
ir_mce_kbd_decoder      3092  0 
ir_jvc_decoder          1664  0 
ir_sony_decoder         1667  0 
ir_nec_decoder          1776  0 
lirc_dev               10110  1 ir_lirc_codec
ir_rc5_decoder          1552  0 
meson_ir                2898  0 
joydev                  8607  0 
aml_gpio                7838  0 
fuse                   70879  2 
nls_cp437               5125  1 

odroid@blackintosh:~$ lsusb
Bus 001 Device 004: ID 1a2c:0e24 China Resource Semico Co., Ltd 
Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod lsmod usb and dmesg ubuntu with dongle plugged : [/b]

Code: Select all

lsmod
Module                  Size  Used by
hid_logitech_dj        11634  0 
uinput                  6669  1 
ir_lirc_codec           4243  3 
lirc_dev               10110  1 ir_lirc_codec
ir_mce_kbd_decoder      3092  0 
ir_sanyo_decoder        1638  0 
ir_sony_decoder         1667  0 
ir_jvc_decoder          1664  0 
ir_rc6_decoder          2024  0 
ir_rc5_decoder          1552  0 
ir_nec_decoder          1776  0 
meson_ir                2898  0 
joydev                  8607  0 
aml_gpio                7838  0 
fuse                   70879  2 
nls_cp437               5125  1 
odroid@blackintosh:~$ lsusb
Bus 001 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
odroid@blackintosh:~$ dmesg
[    0.000000@0] Booting Linux on physical CPU 0x200
[    0.000000@0] Initializing cgroup subsys cpuset
[    0.000000@0] Initializing cgroup subsys cpu
[    0.000000@0] Initializing cgroup subsys cpuacct
[    0.000000@0] Linux version 3.10.80-141 (root@xu3-b2) (gcc version 4.9.2 (Ubuntu/Linaro 4.9.2-0ubuntu1~14.04) ) #1 SMP PREEMPT Wed Jan 27 23:07:36 BRST 2016
[    0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
[    0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000@0] Machine: ODROIDC, model: AMLOGIC
[    0.000000@0] physical memory start address is 0x200000
[    0.000000@0] reserved_end is e3fffff 
[    0.000000@0]  
[    0.000000@0] Total memory is 1022 MiB
[    0.000000@0] Reserved low memory from 0x06000000 to 0x0e3fffff, size: 132 MiB 
[    0.000000@0] 	mesonfb0(low)   	: 0x06100000 - 0x07900000 ( 24 MiB)
[    0.000000@0] 	mesonfb1(low)   	: 0x07900000 - 0x07a00000 (  1 MiB)
[    0.000000@0] 	mesonstream0(low)   	: 0x07a00000 - 0x09a00000 ( 32 MiB)
[    0.000000@0] 	vdec0(low)   	: 0x09a00000 - 0x0da00000 ( 64 MiB)
[    0.000000@0] 	ppmgr0(high)   	: 0x3f000000 - 0x40000000 ( 16 MiB)
[    0.000000@0] 	amvideocap0(low)   	: 0x0da00000 - 0x0e400000 ( 10 MiB)
[    0.000000@0] cma: CMA: reserved 8 MiB at 3e800000
[    0.000000@0] Memory policy: ECC disabled, Data cache writealloc
[    0.000000@0] On node 0 totalpages: 220160
[    0.000000@0] free_area_init_node: node 0, pgdat c09e9c00, node_mem_map c0c83000
[    0.000000@0]   Normal zone: 1520 pages used for memmap
[    0.000000@0]   Normal zone: 0 pages reserved
[    0.000000@0]   Normal zone: 157184 pages, LIFO batch:31
[    0.000000@0]   HighMem zone: 492 pages used for memmap
[    0.000000@0]   HighMem zone: 62976 pages, LIFO batch:15
[    0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
[    0.000000@0] PERCPU: Embedded 8 pages/cpu @c146c000 s8256 r8192 d16320 u32768
[    0.000000@0] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 218640
[    0.000000@0] Kernel command line: root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro console=tty0 console=ttyS0,115200n8 no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=800x600p60hz m_bpp=32 vout=hdmi disableuhs disablehpd=true
[    0.000000@0] cvbs trimming line = 0xa000
[    0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
[    0.000000@0] osd1:1
[    0.000000@0] loaded:268435459
[    0.000000@0] logo has been loaded
[    0.000000@0] 720p:11
[    0.000000@0] full:2
[    0.000000@0] kernel get cvbsmode form uboot is 576cvbs
[    0.000000@0] kernel get hdmimode form uboot is 800x600p60hz
[    0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000@0] allocated 2060288 bytes of page_cgroup
[    0.000000@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000@0] Memory: 64MB 16MB 780MB = 860MB total
[    0.000000@0] Memory: 846504k/846504k available, 34136k reserved, 243712K highmem
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000@0]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000@0]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000@0]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000@0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000@0]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000@0]       .text : 0xc0008000 - 0xc0937cfc   (9408 kB)
[    0.000000@0]       .init : 0xc0938000 - 0xc0970040   ( 225 kB)
[    0.000000@0]       .data : 0xc0972000 - 0xc09eab40   ( 483 kB)
[    0.000000@0]        .bss : 0xc09eab40 - 0xc0c7e6fc   (2639 kB)
[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0] NR_IRQS:256
[    0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000@0] Global timer: MESON TIMER-F (c098d400) initialized
[    0.000000@0] Switching to timer-based delay loop
[    0.000000@0] Console: colour dummy device 80x30
[    0.000000@0] console [tty0] enabled
[    0.000000@0] meson_serial_console_setup
[    0.000000@0] console [ttyS0] enabled
[    0.348810@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.359083@0] pid_max: default: 32768 minimum: 301
[    0.364065@0] Security Framework initialized
[    0.368123@0] AppArmor: AppArmor initialized
[    0.372452@0] Mount-cache hash table entries: 512
[    0.381334@0] Initializing cgroup subsys memory
[    0.381562@0] Initializing cgroup subsys devices
[    0.386102@0] Initializing cgroup subsys freezer
[    0.390746@0] Initializing cgroup subsys blkio
[    0.395105@0] Initializing cgroup subsys perf_event
[    0.400148@0] CPU: Testing write buffer coherency: ok
[    0.405440@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
[    0.410923@0] Setting up static identity map for 0xc0693e40 - 0xc0693e98
[    0.417564@0] L310 cache controller enabled
[    0.421649@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9,  Cache size: 524288 B
[    0.429045@0]       AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL  0x00000000
[    0.437196@0]       TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
[    0.520324@1] CPU1: Booted secondary processor
[    0.520342@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
[    0.540321@2] CPU2: Booted secondary processor
[    0.540340@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
[    0.560320@3] CPU3: Booted secondary processor
[    0.560338@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
[    0.560427@0] Brought up 4 CPUs
[    0.588615@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
[    0.594846@0] CPU: All CPU(s) started in SVC mode.
[    0.600344@0] devtmpfs: initialized
[    0.609533@0] clkrate [ xtal 	] : 24000000
[    0.609578@0] clkrate [ pll_sys 	] : 1200000000
[    0.612534@0] clkrate [ pll_fixed 	] : 2550000000
[    0.617185@0] clkrate [ pll_vid 	] : 732000000
[    0.621613@0] clkrate [ pll_ddr 	] : 0
[    0.625323@0] clkrate [ a9_clk 	] : 1200000000
[    0.629739@0] clkrate [ clk81 	] : 159375000
[    0.634364@0] pinctrl core: initialized pinctrl subsystem
[    0.639565@0] regulator-dummy: no parameters
[    0.644122@0] NET: Registered protocol family 16
[    0.652344@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.656339@0] VPU driver version: v02
[    0.658921@0] load vpu_clk in dts: 182150000Hz(3)
[    0.663650@0] vpu_probe OK
[    0.668167@0] amlogic_gpio gpio: Probed amlogic GPIO driver
[    0.672232@0] register lm device lm-root
[    0.675749@0] register lm device lm1
[    0.679296@0] register lm device lm0
[    0.682901@0] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.690981@0] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.697029@0] Init pinux probe!
[    0.700732@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
[    0.705884@0] tv_init_module
[    0.708713@0] major number 254 for disp
[    0.712535@0] vout_register_server
[    0.715893@0] register tv module server ok
[    0.720041@0] hdmitx: system: amhdmitx_init
[    0.724120@0] hdmitx: system: Ver: 2014May6
[    0.728336@0] hdmitx: system: amhdmitx_probe
[    0.732810@0] hdmitx: system: gate/pwr cmd: 7
[    0.736851@0] hdmitx: system: ALREADY init VIC = 4
[    0.741628@0] hdmitx: system: gate/pwr cmd: 0
[    0.746363@1] hdmitx: system: reset intr mask
[    0.770379@0] hdmitx: system: irq 1
[    0.777258@0] bio: create slab <bio-0> at 0
[    0.777948@0] SCSI subsystem initialized
[    0.779885@0] usbcore: registered new interface driver usbfs
[    0.785417@0] usbcore: registered new interface driver hub
[    0.790905@0] usbcore: registered new device driver usb
[    0.796064@0] media: Linux media interface: v0.10
[    0.800719@0] Linux video capture interface: v2.00
[    0.805853@0] switch_vpu_mem_pd: unsupport vpu mod
[    0.810213@0] unsupport vmod
[    0.813047@0] TV mode 800x600p60hz selected.
[    0.817293@0] tvoutc_setmode[459]
[    0.820602@0] aml_logo: outputmode changed(11->17), reset osd1 scaler.
[    0.847387@0] Advanced Linux Sound Architecture Driver Initialized.
[    0.848430@0] Bluetooth: Core ver 2.16
[    0.851820@0] NET: Registered protocol family 31
[    0.856345@0] Bluetooth: HCI device and connection manager initialized
[    0.862860@0] Bluetooth: HCI socket layer initialized
[    0.867865@0] Bluetooth: L2CAP socket layer initialized
[    0.873086@0] Bluetooth: SCO socket layer initialized
[    0.878232@0] Loading modules backported from Linux version next-20150129-0-g828f79f
[    0.885808@0] Backport integrated by backports.git backports-20150129-0-gdd4a670
[    0.893395@0] cfg80211: Calling CRDA to update world regulatory domain
[    0.900292@0] Switching to clocksource Timer-E
[    0.904385@0] AppArmor: AppArmor Filesystem Enabled
[    0.916395@0] NET: Registered protocol family 2
[    0.917123@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.922612@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.929212@0] TCP: Hash tables configured (established 8192 bind 8192)
[    0.935646@0] TCP: reno registered
[    0.938951@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.945054@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.951710@0] NET: Registered protocol family 1
[    0.956231@0] Unpacking initramfs...
[    1.072572@0] Freeing initrd memory: 2040K (c4e08000 - c5006000)
[    1.073563@0] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 3 counters available
[    1.081764@0] audit: initializing netlink socket (disabled)
[    1.086795@0] type=2000 audit(1.000:1): initialized
[    1.092279@0] bounce pool size: 64 pages
[    1.100615@0] VFS: Disk quotas dquot_6.5.2
[    1.100882@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.108062@0] aufs 3.10.x
[    1.108814@0] msgmni has been set to 1181
[    1.114354@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.120338@0] io scheduler noop registered
[    1.124412@0] io scheduler deadline registered
[    1.128937@0] io scheduler cfq registered (default)
[    1.175742@0] [drm] Initialized drm 1.1.0 20060810
[    1.175909@0] gpu cooling register okay with err=0
[    1.182451@0] Mali: Mali device driver loaded
[    1.184224@0] UMP: UMP device driver -jenkins-deb_kernel_c1-141 loaded
[    1.193347@0] loop: module loaded
[    1.194336@0] tun: Universal TUN/TAP device driver, 1.6
[    1.198992@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.205469@0] PPP generic driver version 2.4.2
[    1.210069@0] usbcore: registered new interface driver usb-storage
[    1.216008@0] usbcore: registered new interface driver usbserial
[    1.221884@0] usbcore: registered new interface driver usbserial_generic
[    1.228567@0] usbserial: USB Serial support registered for generic
[    1.234927@0] mousedev: PS/2 mouse device common for all mice
[    1.240658@0] i2c /dev entries driver
[    1.244390@0] device-mapper: uevent: version 1.0.3
[    1.249054@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.257516@0] Bluetooth: HCI UART driver ver 2.2
[    1.261940@0] Bluetooth: HCI H4 protocol initialized
[    1.266890@0] Bluetooth: HCI BCSP protocol initialized
[    1.271980@0] Bluetooth: HCILL protocol initialized
[    1.276842@0] Bluetooth: HCIATH3K protocol initialized
[    1.281937@0] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[    1.288972@0] ledtrig-cpu: registered to indicate activity on CPUs
[    1.294677@0] hidraw: raw HID events driver (C) Jiri Kosina
[    1.300365@0] usbcore: registered new interface driver usbhid
[    1.305857@0] usbhid: USB HID core driver
[    1.310045@0] efuse===========================================
[    1.315792@0] efuse: device efuse created
[    1.319653@0] efuse--------------------------------------------
[    1.325514@0] vout_init_module
[    1.328554@0] start init vout module 
[    1.332276@0] create  vout attribute ok 
[    1.336319@0] ge2d_init
[    1.338649@0] ge2d_dev major:244
[    1.342090@0] ge2d start monitor
[    1.345335@0] osd_init
[    1.345349@1] ge2d workqueue monitor start
[    1.351768@0] osd_probe, vinfo:c06d40d8
[    1.355863@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
[    1.363689@0] osd_probe, mydef_var:c09c06d0, vinfo:c06d40d8
[    1.369243@0] init fbdev bpp is :32
[    1.372766@0] ---------------clear framebuffer0 memory  
[    1.402171@0] Console: switching to colour frame buffer device 160x90
[    1.415397@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
[    1.423360@0] osd_probe, mydef_var:c09c06d0, vinfo:c06d40d8
[    1.428887@0] don't find to display_size_default from mesonfb-dts
[    1.434951@0] init fbdev bpp is :24
[    1.442531@0] osd probe ok  
[    1.442599@0] hdmitx: video: get current mode: 800x600p60hz
[    1.446988@0] hdmitx: video: get current mode: 800x600p60hz
[    1.452513@0] hdmitx: system: gate/pwr cmd: 7
[    1.456890@0] hdmitx: system: already init VIC = 0  Now VIC = 76
[    1.462821@0] hdmitx: system:  76 (cd0,cs0,pm1,vd0,1) 
[    1.467931@0] hdmitx: system: gate/pwr cmd: 0
[    1.472238@0] hdmitx: system: hw reset
[    1.477006@0] hdmitx: audio: SPDIF
[    1.479375@0] reconfig packet setting done
[    1.503388@0] hdmitx: system: set pll
[    1.503460@0] hdmitx: system: param->VIC:76
[    1.505642@0] mode is: 17
[    1.508203@0] VPU_VIU_VENC_MUX_CTRL: 0xa
[    1.512117@0] viu chan = 1
[    1.514803@0] VPU_VIU_VENC_MUX_CTRL: 0xa
[    1.518699@0] config HPLL
[    1.534107@0] config HPLL done
[    1.534177@0] enc_vpu_bridge_reset[314]
[    1.674099@0] hdmitx: system: phy setting done
[    1.674186@0] hdmi: Fixing to HDMI Mode
[    1.676762@0] hdmi: Sink is HDMI device
[    1.680574@0] hdmi: No sink attached
[    1.684173@0] hdmitx: audio: audio channel num is 0
[    1.688993@0] hdmitx: audio: SPDIF
[    1.692351@0] hdmitx: audio: current VIC: 76
[    1.696612@0] hdmitx: audio: audio sample rate: 0
[    1.701277@0] hdmitx: audio: reset audio N para
[    1.705804@0] hdmitx: audio: PCM out to HDMI
[    1.722451@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[    1.722627@0] hdmitx: audio: i2s_to_spdif_flag:1 
[    1.727303@0] hdmitx: audio: Enable audio spdif to HDMI
[    1.770295@0] amlvideo-000: V4L2 device registered as video10
[    1.770699@0] ionvideo-000: V4L2 device registered as video13
[    1.776210@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
[    1.784661@0] DI: di_init
[    1.784760@0] aml_wdt_driver_init,306
[    1.788207@0] ** disable watchdog
[    1.791571@0] one-secod=7812,min_timeout=1,max_timeout=8,default_timeout=10,reset_watchdog_method=0,reset_watchdog_time=2,shutdown_timeout=10,firmware_timeout=6,suspend_timeout=6
[    1.807747@0] AML Watchdog Timer probed done 
[    1.811976@0] set uart_ao pinmux use pinctrl subsystem
[    1.816820@0] P_AO_RTI_PIN_MUX_REG:1801
[    1.820611@0] start uart_ao_ttyS0:(irq = 122)
[    1.824938@0] register uart_ao ok
[    1.828414@0] set uart_b pinmux use pinctrl subsystem
[    1.833243@0] P_AO_RTI_PIN_MUX_REG:1801
[    1.840496@0] start uart_b_ttyS2:(irq = 107)
[    1.844669@0] register uart_b ok
[    1.848169@0] dwc_otg: version 3.10a 12-MAY-2014
[    1.852467@0] dwc_otg lm-root: dwc_otg_driver_probe(ef343800)
[    1.852477@0] dwc_otg_driver_probe NOT match
[    1.856730@0] dwc_otg lm1: dwc_otg_driver_probe(ef343a00)
[    1.896733@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
[    1.903229@0] USB (1) use clock source: XTAL input
[    1.909043@0] dwc_otg lm1: base=0xfe080000
[    1.909054@0] dwc_otg lm1: dwc_otg_device=0xef4cf200
[    1.929183@0] Core Release: 3.10a
[    1.932716@0] Setting default values for core params
[    1.936273@0] curmode: 1, host_only: 1
[    1.939789@0] dwc_otg lm1: DMA config: BURST_DEFAULT
[    1.959945@0] Using Buffer DMA mode
[    1.963426@0] OTG VER PARAM: 1, OTG VER FLAG: 1
[    1.966921@0] Working on port type = HOST
[    1.970633@0] dwc_otg lm1: DWC OTG Controller
[    1.974151@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
[    1.980779@0] dwc_otg lm1: irq 63, io mem 0x00000000
[    1.985687@0] -------hcd->flags.d32 = 0
[    1.989494@0] Init: Port Power? op_state=1
[    1.993546@0] Init1: Power Port (0)
[    1.997540@0] hub 1-0:1.0: USB hub found
[    2.001055@0] hub 1-0:1.0: 1 port detected
[    2.005180@0] dwc_otg lm0: dwc_otg_driver_probe(ef343c00)
[    2.005217@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
[    2.013693@0] USB (0) use clock source: XTAL input
[    2.019459@0] dwc_otg lm0: base=0xfe040000
[    2.019470@0] dwc_otg lm0: dwc_otg_device=0xef5e2480
[    2.039566@0] Core Release: 3.10a
[    2.043151@0] Setting default values for core params
[    2.046750@0] curmode: 1, host_only: 0
[    2.090252@0] dwc_otg lm0: DMA config: BURST_DEFAULT
[    2.110411@0] Using Buffer DMA mode
[    2.113914@0] OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.117430@0] Working on port type = OTG
[    2.120915@0] Current port type: SLAVE
[    2.124631@0] dwc_otg lm0: DWC OTG Controller
[    2.128178@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
[    2.134861@0] dwc_otg lm0: irq 62, io mem 0x00000000
[    2.140187@0] hub 2-0:1.0: USB hub found
[    2.143635@0] hub 2-0:1.0: 1 port detected
[    2.147828@0] Dedicated Tx FIFOs mode
[    2.151680@0] using timer detect id change, ef5a2400
[    2.156458@0] ethernet_driver probe!
[    2.159871@0] ethernetinit(dbg[c09c52ec]=1)
[    2.163982@0] ethernet base addr is fe0c0000
[    2.168254@0] write mac add to:ef5e7e48: 00 1e 06 10 34 19 |.\x1e.\x104\x19|
[    2.178825@0] libphy: AMLMAC MII Bus: probed
[    2.182302@0] eth0: PHY ID 001cc916 at 0 IRQ -1 (0:00) active
[    2.186668@0] eth0: PHY ID 001cc916 at 1 IRQ -1 (0:01) active
[    2.192493@0] amvideocap_init_module
[    2.196074@0] amvideocap_probe,amvideocap
[    2.199870@0] amvideocap_dev_register buf:0da00000,size:a00000.
[    2.205852@1] Indeed it is in host mode hprt0 = 00021501
[    2.211220@0] Amlogic A/V streaming port init
[    2.216669@0] init vdec memsource 9a00000->d9fffff
[    2.220341@0] [tsync_pcr_init]init success. 
[    2.224511@0] regist mpeg12 codec profile
[    2.228483@0] regist mpeg4 codec profile
[    2.232319@0] amvdec_vc1 module init
[    2.235940@0] regist vc1 codec profile
[    2.239583@0] amvdec_h264 module init
[    2.243296@0] regist h264 codec profile
[    2.247071@0] amvdec_h265 module init
[    2.250710@0] regist hevc codec profile
[    2.254546@0] regist mjpeg codec profile
[    2.258371@0] amvdec_real module init
[    2.262057@0] regist real codec profile
[    2.265904@0] amvdec_avs module init
[    2.269632@0] regist avc codec profile
[    2.273173@0] jpegenc module init
[    2.276939@0] alloc_keep_buffer keep_y_addr ee600000
[    2.281419@0] alloc_keep_buffer keep_u_addr eeb00000
[    2.286293@0] alloc_keep_buffer keep_v_addr eec00000
[    2.291198@0] yaddr=ee600000,u_addr=eeb00000,v_addr=eec00000
[    2.297111@0] create_ge2d_work_queue video task ok 
[    2.301848@0] SARADC Driver init.
[    2.305479@0] __saradc_probe__
[    2.384144@0] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.388665@3] Indeed it is in host mode hprt0 = 00001101
[    2.454223@0] saradc calibration: ref_val = 506
[    2.457513@0] saradc calibration: ref_nominal = 512
[    2.461196@0] saradc calibration: coef = 4017
[    2.465758@0] ir irblaster probe
[    2.469194@0] Remote Driver
[    2.472524@0] ==touch_ts_init==
[    2.475834@0] ==ft5x0x_ts_init==
[    2.479040@0] ==goodix_ts_init==
[    2.482242@0] i2c-core: driver [gslx680_compatible] using legacy suspend method
[    2.488304@0] i2c-core: driver [gslx680_compatible] using legacy resume method
[    2.495491@0] !!!ntp_ts: ret = 0. 
[    2.498762@0] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
[    2.505246@0] i2c-core: driver [ct36x] using legacy suspend method
[    2.511347@0] i2c-core: driver [ct36x] using legacy resume method
[    2.517398@0] VTL ct36x TouchScreen driver End.
[    2.521887@0] ==gsl_ts_init==
[    2.525074@0] ret=0
[    2.528379@0] i2c-core: driver [mir3da] using legacy suspend method
[    2.533174@0] i2c-core: driver [mir3da] using legacy resume method
[    2.539378@2] i2c-core: driver [lis3dh_acc] using legacy suspend method
[    2.545918@2] i2c-core: driver [lis3dh_acc] using legacy resume method
[    2.552374@2] i2c-core: driver [bma222] using legacy suspend method
[    2.558570@2] i2c-core: driver [bma222] using legacy resume method
[    2.564762@2] i2c-core: driver [dmard06] using legacy suspend method
[    2.571022@2] i2c-core: driver [dmard06] using legacy resume method
[    2.577284@2] lsm303d driver: init
[    2.580660@2] i2c-core: driver [dmard10] using legacy suspend method
[    2.586191@3] hub 1-1:1.0: USB hub found
[    2.586537@3] hub 1-1:1.0: 4 ports detected
[    2.594952@2] i2c-core: driver [dmard10] using legacy resume method
[    2.601241@2] stk8313_init
[    2.604346@2] ======stk831x init ok======
[    2.607867@2] stk831x_init
[    2.610935@2] mxc622x accelerometer driver: init
[    2.615187@2] i2c-core: driver [mxc622x] using legacy suspend method
[    2.621509@2] i2c-core: driver [mxc622x] using legacy resume method
[    2.627742@2] mxc6255xc accelerometer driver: init
[    2.632504@2] i2c-core: driver [mxc6255xc] using legacy suspend method
[    2.639017@2] i2c-core: driver [mxc6255xc] using legacy resume method
[    2.645481@2] cm3217 v.1.0.0.1
[    2.648606@2] i2c-core: driver [elan_epl6814] using legacy suspend method
[    2.655258@2] i2c-core: driver [elan_epl6814] using legacy resume method
[    2.661913@2] i2c-core: driver [LTR501] using legacy suspend method
[    2.668136@2] i2c-core: driver [LTR501] using legacy resume method
[    2.674402@2] mmc driver version: 1.07, 2014-06-30: eMMC add hw reset function
[    2.682450@2] host->base fe108e00
[    2.685747@2] pdata->caps 107
[    2.688867@2] pdata->caps2 0
[    2.691941@2] get property:                     port, value:0x00000004
[    2.697060@2] get property:                ocr_avail, value:0x00200080
[    2.703509@2] get property:                    f_min, value:0x000493e0
[    2.710019@2] get property:                    f_max, value:0x05f5e100
[    2.716489@2] get property:             max_req_size, value:0x00020000
[    2.722936@2] get property:                   irq_in, value:0x00000003
[    2.729419@2] get property:                  irq_out, value:0x00000005
[    2.735899@2] get property:                  gpio_cd, str:CARD_6
[    2.741834@2] get property:                  pinname, str:sd
[    2.747459@2] get property:                card_type, value:0x00000005
[    2.753959@2] get property:                gpio_dat3, str:CARD_4
[    2.759938@2] get property:               gpio_volsw, str:GPIOAO_3
[    2.766251@2] aml_sd_voltage_switch[1309] : Switched to voltage -> 3.30 V
[    2.824139@1] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    2.864437@3] usb 1-1.1: new low-speed USB device number 3 using dwc_otg
[    2.884113@2] [aml_sdhc_probe] aml_sdhc_probe() success!
[    2.887935@2] host->base fe108c20
[    2.891114@2] pdata->caps 80000507
[    2.894255@2] pdata->caps2 1
[    2.897351@2] get property:                     port, value:0x00000002
[    2.902929@2] get property:                ocr_avail, value:0x00200000
[    2.909433@2] get property:                    f_min, value:0x000493e0
[    2.915919@2] get property:                    f_max, value:0x02faf080
[    2.922373@2] get property:                  f_max_w, value:0x02faf080
[    2.928883@2] get property:             max_req_size, value:0x00020000
[    2.935398@2] get property:                  pinname, str:emmc
[    2.941156@2] get property:                card_type, value:0x00000001
[    2.947660@2] get property:                gpio_dat3, str:BOOT_3
[    2.953602@2] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=1
[    2.972062@3] input: PixArt USB Optical Mouse as /devices/lm1/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[    2.979071@3] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-lm1-1.1/input0
[    3.003403@1] sd: new high speed SDHC card at address 59b4, clock 50000000, 4-bit-bus-width
[    3.009758@1] mmcblk0: sd:59b4 NCard 14.9 GiB 
[    3.014764@1]  mmcblk0: p1 p2
[    3.018611@1] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    3.023566@1] aml_emmc_hw_reset 1379
[    3.054111@2] [aml_sdio_probe] aml_sdio_probe() success!
[    3.057636@2] [dsp]DSP start addr 0xc5e00000
[    3.061448@2] [dsp]register dsp to char divece(257)
[    3.067336@2] aml_rtc rtc.1: rtc core: registered aml_rtc as rtc0
[    3.073808@2] amlogic rfkill init
[    3.077391@2] Bluetooth: btwake_control_init Driver Ver 1.1
[    3.081573@2] aml_hw_crypto initialization.
[    3.086499@2] pcm5102_platform_probe
[    3.090241@2] enter aml_i2s_dai_probe
[    3.090250@2] i2s get no clk src setting in dts, use the default mpll 0
[    3.095670@2] enter aml_pcm_dai_probe
[    3.095875@2] enter spdif_dit_probe 
[    3.099321@2] aml_spdif_unmute 
[    3.103701@2] aml-i2s 0:playback preallocate_dma_buffer: area=f0516000, addr=3ec40000, size=65536
[    3.111441@2] aml-i2s 1:capture preallocate_dma_buffer: area=f0528000, addr=3ec60000, size=65536
[    3.119894@2] aml_snd_m8 aml_m8_sound_card.4:  dit-hifi <-> aml-spdif-dai.0 mapping ok
[    3.128818@2] GACT probability NOT on
[    3.132428@2] Mirror/redirect action on
[    3.136667@2] NET: Registered protocol family 10
[    3.140997@2] mip6: Mobile IPv6
[    3.144649@2] sit: IPv6 over IPv4 tunneling driver
[    3.149209@2] NET: Registered protocol family 17
[    3.152901@2] NET: Registered protocol family 15
[    3.156946@2] Bridge firewalling registered
[    3.161125@2] Bluetooth: RFCOMM TTY layer initialized
[    3.166055@2] Bluetooth: RFCOMM socket layer initialized
[    3.171290@2] Bluetooth: RFCOMM ver 1.11
[    3.175154@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.180592@2] Bluetooth: BNEP filters: protocol multicast
[    3.185984@2] Bluetooth: BNEP socket layer initialized
[    3.191066@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.197168@2] Bluetooth: HIDP socket layer initialized
[    3.202245@2] NET: Registered protocol family 35
[    3.207363@2] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
[    3.214682@2] Registering SWP/SWPB emulation handler
[    3.219725@2] pm-meson: probe of aml_pm_m8 failed with error -1
[    3.225997@2] registered taskstats version 1
[    3.229814@2] regulator-dummy: disabling
[    3.233823@2] Mali DRM initialize, driver name: mali_drm, version 2.1
[    3.240383@2] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
[    3.246281@2] Mali DRM initialize, driver name: mali_drm, version 2.1
[    3.252889@2] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
[    3.259419@2] aml_rtc rtc.1: setting system clock to 2016-02-09 14:12:44 UTC (1455027164)
[    3.267037@2] ### dt-test ### No testcase data in device tree; not running tests
[    3.274434@3] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[    3.274508@2] meson_cpufreq_probe:SYSPLL request to be fixed
[    3.274511@2] meson_cpufreq: no voltage_control prop
[    3.274513@2] voltage_control = 0
[    3.275346@2] <<-GTP-INFO->> GTP driver installing...
[    3.275556@2] buf[0]=f1,buf[1]=af,err=4
[    3.275560@2] adc=383,TS_C=17,flag=1
[    3.275561@2] efuse_flag=a
[    3.275565@2] amlogic_thermal_probe, this chip is trimmed, use thermal
[    3.275570@2] amlogic-thermal aml_thermal: amlogic thermal probe start
[    3.275574@2] #thermal-cells=7
[    3.275576@2] pdata->temp_trip_count=4
[    3.275580@2] temperature=70 on trip point=0
[    3.275586@2] fixing high_freq=1488001 to 1488000 at trip point 0,level=3
[    3.275591@2] fixing low_freq=1488001 to 1488000 at trip point 0,level=3
[    3.275593@2] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
[    3.275595@2] cpu[0] core num==3
[    3.275596@2] gpu[0] core num==2
[    3.275598@2] temperature=80 on trip point=1
[    3.275602@2] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
[    3.275607@2] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
[    3.275609@2] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
[    3.275611@2] cpu[1] core num==2
[    3.275612@2] gpu[1] core num==2
[    3.275614@2] temperature=90 on trip point=2
[    3.275618@2] fixing high_freq=800001 to 696000 at trip point 2,level=11
[    3.275622@2] fixing low_freq=800001 to 696000 at trip point 2,level=11
[    3.275625@2] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
[    3.275627@2] cpu[2] core num==1
[    3.275628@2] gpu[2] core num==1
[    3.275630@2] temperature=110 on trip point=3
[    3.275634@2] fixing high_freq=-1 to -22 at trip point 3,level=-1
[    3.275638@2] fixing low_freq=-1 to -22 at trip point 3,level=-1
[    3.275641@2] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
[    3.275642@2] cpu[3] core num==-1
[    3.275644@2] gpu[3] core num==-1
[    3.275647@2] idle interval=1000
[    3.275649@2] pdata->name:aml_thermal
[    3.275837@2] tmp_trip[0].cpu_core_upper=1
[    3.275849@2] tmp_trip[1].cpu_core_upper=2
[    3.275857@2] tmp_trip[2].cpu_core_upper=3
[    3.275865@2] tmp_trip[3].cpu_core_upper=-1
[    3.275874@2] aml_thermal bind thermal-cpucore-0 okay !
[    3.275904@2] aml_thermal bind thermal-cpufreq-0 okay !
[    3.275908@2] pdata->tmp_trip[0].gpu_lower_level=1
[    3.275910@2] pdata->tmp_trip[0].gpu_upper_level=1
[    3.275919@2] pdata->tmp_trip[1].gpu_lower_level=2
[    3.275921@2] pdata->tmp_trip[1].gpu_upper_level=2
[    3.275930@2] pdata->tmp_trip[2].gpu_lower_level=4
[    3.275931@2] pdata->tmp_trip[2].gpu_upper_level=4
[    3.275940@2] pdata->tmp_trip[3].gpu_lower_level=-1
[    3.275941@2] pdata->tmp_trip[3].gpu_upper_level=-1
[    3.275950@2] aml_thermal bind thermal-gpufreq-0 okay !
[    3.276081@2] amlogic: Kernel Thermal management registered
[    3.276086@2] amlogic-thermal aml_thermal: amlogic thermal probe done
[    3.276132@2] hdmitx: cec: CEC init
[    3.276209@1] hdmitx: cec: CEC task process
[    3.276342@2] input: cec_input as /devices/virtual/input/input1
[    3.276497@2] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[    3.276497@2] ALSA device list:
[    3.276500@2]   #0: ODROID-HDMI
[    3.563556@2] config uart_ao_ttyS0:: Character length 8bits/char
[    3.574115@2] Changing uart_ao_ttyS0: baud from 0 to 115200
[    3.594309@2] Freeing unused kernel memory: 224K (c0938000 - c0970000)
[    3.649825@3] systemd-udevd[113]: starting version 204
[    3.673734@3] input: SEM USB Keyboard as /devices/lm1/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[    3.679586@3] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-lm1-1.2/input0
[    3.694337@3] input: SEM USB Keyboard as /devices/lm1/usb1/1-1/1-1.2/1-1.2:1.1/input/input3
[    3.700237@3] hid-generic 0003:1A2C:0E24.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-lm1-1.2/input1
[    3.743189@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.746354@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.752361@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.759698@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.765112@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.771455@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.777914@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.785362@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.793084@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.800843@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.809639@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.810830@2] tvmode set to 800x600p60hz
[    3.810830@2] 
[    3.810840@2] don't set the same mode as current.
[    3.835188@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.835195@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.835200@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.835208@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.835869@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.835874@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.835879@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.835885@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.836519@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.836524@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.836530@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.836536@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.837196@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.837200@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.837205@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.837211@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.845337@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.845346@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.845353@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.845983@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.845988@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.845993@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.845998@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.846651@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.846656@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.846661@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    4.020231@0] tvmode set to 800x600p60hz
[    4.020231@0] 
[    4.025824@0] don't set the same mode as current.
[    4.136068@1] force enable DISCARD here for ext4 fs
[    4.165190@1] checked enable EXT4 DISCARD here
[    4.168036@1] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard
[    4.179418@1] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.767907@0] config uart_ao_ttyS0:: Character length 8bits/char
[    4.826619@1] init: plymouth-upstart-bridge main process (165) terminated with status 1
[    4.832589@1] init: plymouth-upstart-bridge main process ended, respawning
[    4.843727@2] config uart_ao_ttyS0:: Character length 8bits/char
[    4.865201@2] init: plymouth-upstart-bridge main process (175) terminated with status 1
[    4.870777@2] init: plymouth-upstart-bridge main process ended, respawning
[    4.879862@3] config uart_ao_ttyS0:: Character length 8bits/char
[    4.894461@2] init: plymouth-upstart-bridge main process (178) terminated with status 1
[    4.899987@2] init: plymouth-upstart-bridge main process ended, respawning
[    4.912997@3] config uart_ao_ttyS0:: Character length 8bits/char
[    4.928782@1] init: plymouth-upstart-bridge main process (180) terminated with status 1
[    4.934474@1] init: plymouth-upstart-bridge main process ended, respawning
[    4.947195@2] config uart_ao_ttyS0:: Character length 8bits/char
[    4.966740@0] init: plymouth-upstart-bridge main process (182) terminated with status 1
[    4.972396@0] init: plymouth-upstart-bridge main process ended, respawning
[    4.990796@0] config uart_ao_ttyS0:: Character length 8bits/char
[    5.826156@3] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    6.552818@2] systemd-udevd[330]: starting version 204
[    6.601021@0] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    6.732970@1] fuse init (API version 7.22)
[    7.002055@1] aml_gpio_probe : success
[    7.035201@3] emmc: mmc_rescan_try_freq: trying to init card at 300000 Hz
[    7.074140@3] aml_emmc_hw_reset 1379
[    7.086511@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.090218@1] quiet_error: 1 callbacks suppressed
[    7.090232@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.144135@2] mmcblk0: r/w command failed, status = 0x80000b00
[    7.147883@2] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.172672@2] mmcblk0: r/w command failed, status = 0x80000b00
[    7.176235@2] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.186194@2] mmcblk0: r/w command failed, status = 0x80000b00
[    7.189718@2] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.198707@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.202279@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.211473@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.215097@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.324869@2] mmcblk0: r/w command failed, status = 0x80000b00
[    7.328606@2] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.499999@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.503201@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.511487@0] mmcblk0: r/w command failed, status = 0x80000b00
[    7.515924@0] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.541403@2] mmcblk0: r/w command failed, status = 0x80000b00
[    7.541420@2] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.883690@1] ionvideo open
[    7.883864@1] ionvideo_stop_generating!!!!
[    7.883878@1] ionvideo release
[    9.508267@3] config uart_b_ttyS2:: Character length 8bits/char
[    9.524264@3] Changing uart_b_ttyS2: baud from 0 to 115200
[    9.547464@2] config uart_b_ttyS2:: Character length 8bits/char
[   10.417520@3] netdev_open
[   10.417534@3] Ethernet reset
[   10.417562@3] NET MDA descpter start addr=ecf00000
[   10.501623@3] phy_interface = 0
[   10.501638@3] aml_phy_init:  trying to attach to 0:01
[   10.501822@3] am_rtl811f called phy reset
[    7.883658@3] amlvideo openamlvideo close
[   10.514258@3] --1--write mac add to:ef5e7e48: 00 1e 06 10 34 19 |.\x1e.\x104\x19|
[   10.514304@3] --2--write mac add to:ef5e7e48: 00 1e 06 10 34 19 |.\x1e.\x104\x19|
[   10.514343@3] write mac add to:ef5e7e48: 00 1e 06 10 34 19 |.\x1e.\x104\x19|
[   10.514379@3] Current DMA mode=0, set mode=621c100
[   10.514422@3] eth0: opened (irq 40).
[   10.524429@3] ether leave promiscuous mode
[   10.524442@3] ether leave all muticast mode
[   10.524611@3] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.524539@1] Registered IR keymap rc-empty
[   11.528169@1] input: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0/input4
[   11.530988@1] rc0: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0
[   11.555024@1] IR NEC protocol handler initialized
[   11.557180@1] IR RC5(x) protocol handler initialized
[   11.564128@0] IR RC6 protocol handler initialized
[   11.570966@0] IR JVC protocol handler initialized
[   11.580320@0] IR Sony protocol handler initialized
[   11.594390@0] meson-ir c8100580.meson-ir: receiver initialized
[   11.678235@0] IR SANYO protocol handler initialized
[   11.679582@3] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input5
[   11.680936@3] IR MCE Keyboard/mouse protocol handler initialized
[   11.681970@0] lirc_dev: IR Remote Control driver registered, major 238 
[   11.686338@1] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
[   11.686355@1] IR LIRC bridge handler initialized
[   12.049945@0] input: lircd as /devices/virtual/input/input6
[   12.476612@0] init: plymouth-upstart-bridge main process ended, respawning
[   13.072318@3] create_disp_get_ump_secure_id******0
[   13.072951@3] create_disp_get_ump_secure_id******1
[   13.137706@1] init: plymouth-stop pre-start process (1085) terminated with status 1
[   14.514246@3] [adjust link] -> eth: full-duplex
[   14.514265@3] [adjust link] -> eth: phy_speed <> priv_speed)
[   14.514279@3] [adjust link -> eth: am_adjust_link state change (new_state=true)
[   14.514286@3] libphy: 0:01 - Link is Up - 1000/Full
[   14.514358@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   24.496255@1] The PHY does not support set_wol, was CONFIG_MICREL_PHY enabled?
[   24.716844@0] runtime dma_bytes 65536,stream type 0 
[   24.716946@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   24.716954@0] audio_set_958_clk, freq=5,
[   24.716962@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   24.716968@0] iec958 mode PCM16
[   24.716976@0] IEC958 16bit
[   24.716984@0] hdmitx: audio: aout notify rate 44100
[   24.716989@0] hdmitx: audio: aout notify size 16
[   24.716994@0] hdmitx: audio: aout notify format CT_PCM
[   24.717001@0] hdmitx: audio: audio channel num is 1
[   24.717009@0] hdmitx: audio: SPDIF
[   24.717021@0] hdmitx: audio: current VIC: 76
[   24.717026@0] hdmitx: audio: audio sample rate: 2
[   24.717031@0] hdmitx: audio: reset audio N para
[   24.717041@0] hdmitx: audio: PCM out to HDMI
[   24.731796@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   24.731814@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   24.731819@0] hdmitx: audio: Enable audio spdif to HDMI
[   24.731829@0] hdmitx: audio: Audio Type: PCM
[   24.731872@0] hdmitx: audio: set audio param
[   24.732028@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   24.732036@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   24.732043@0] iec958 mode PCM16
[   24.732050@0] IEC958 16bit
[   24.732057@0] hdmitx: audio: aout notify rate 44100
[   24.732063@0] hdmitx: audio: aout notify size 16
[   24.732069@0] hdmitx: audio: audio channel num is 1
[   24.732077@0] hdmitx: audio: SPDIF
[   24.732089@0] hdmitx: audio: current VIC: 76
[   24.732094@0] hdmitx: audio: audio sample rate: 2
[   24.732098@0] hdmitx: audio: reset audio N para
[   24.732109@0] hdmitx: audio: PCM out to HDMI
[   24.744316@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   24.744335@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   24.744340@0] hdmitx: audio: Enable audio spdif to HDMI
[   24.744349@0] hdmitx: audio: Audio Type: PCM
[   24.744393@0] hdmitx: audio: set audio param
[   24.841036@2] runtime dma_bytes 65536,stream type 1 
[   25.944067@3] alsa capture long time no data, quit xrun!
[   26.963982@3] alsa capture long time no data, quit xrun!
[   27.983424@3] alsa capture long time no data, quit xrun!
[   29.002925@3] alsa capture long time no data, quit xrun!
[   30.022425@3] alsa capture long time no data, quit xrun!
[   30.101536@0] runtime dma_bytes 65536,stream type 1 
[   30.147850@0] runtime dma_bytes 65536,stream type 1 
[   30.151300@0] runtime dma_bytes 65536,stream type 1 
[   30.153047@0] runtime dma_bytes 65536,stream type 0 
[   30.153083@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.153090@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.153097@0] iec958 mode PCM16
[   30.153105@0] IEC958 16bit
[   30.153112@0] hdmitx: audio: aout notify rate 44100
[   30.153117@0] hdmitx: audio: aout notify size 16
[   30.153123@0] hdmitx: audio: audio channel num is 0
[   30.153132@0] hdmitx: audio: SPDIF
[   30.153143@0] hdmitx: audio: current VIC: 76
[   30.153148@0] hdmitx: audio: audio sample rate: 2
[   30.153152@0] hdmitx: audio: reset audio N para
[   30.153163@0] hdmitx: audio: PCM out to HDMI
[   30.164439@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.164453@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.164458@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.164467@0] hdmitx: audio: Audio Type: PCM
[   30.164509@0] hdmitx: audio: set audio param
[   30.164671@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.164680@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.164687@0] iec958 mode PCM16
[   30.164694@0] IEC958 16bit
[   30.164702@0] hdmitx: audio: aout notify rate 44100
[   30.164707@0] hdmitx: audio: aout notify size 16
[   30.164713@0] hdmitx: audio: audio channel num is 0
[   30.164720@0] hdmitx: audio: SPDIF
[   30.164732@0] hdmitx: audio: current VIC: 76
[   30.164737@0] hdmitx: audio: audio sample rate: 2
[   30.164741@0] hdmitx: audio: reset audio N para
[   30.164752@0] hdmitx: audio: PCM out to HDMI
[   30.175994@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.176008@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.176013@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.176021@0] hdmitx: audio: Audio Type: PCM
[   30.176063@0] hdmitx: audio: set audio param
[   30.189139@0] runtime dma_bytes 65536,stream type 1 
[   30.190753@0] runtime dma_bytes 65536,stream type 1 
[   30.192233@0] runtime dma_bytes 65536,stream type 1 
[   30.194063@0] runtime dma_bytes 65536,stream type 0 
[   30.194101@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.194107@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.194114@0] iec958 mode PCM16
[   30.194122@0] IEC958 16bit
[   30.194130@0] hdmitx: audio: aout notify rate 44100
[   30.194135@0] hdmitx: audio: aout notify size 16
[   30.194141@0] hdmitx: audio: audio channel num is 1
[   30.194149@0] hdmitx: audio: SPDIF
[   30.194160@0] hdmitx: audio: current VIC: 76
[   30.194165@0] hdmitx: audio: audio sample rate: 2
[   30.194169@0] hdmitx: audio: reset audio N para
[   30.194180@0] hdmitx: audio: PCM out to HDMI
[   30.205432@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.205446@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.205451@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.205459@0] hdmitx: audio: Audio Type: PCM
[   30.205501@0] hdmitx: audio: set audio param
[   30.205671@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.205681@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.205688@0] iec958 mode PCM16
[   30.205695@0] IEC958 16bit
[   30.205702@0] hdmitx: audio: aout notify rate 44100
[   30.205707@0] hdmitx: audio: aout notify size 16
[   30.205713@0] hdmitx: audio: audio channel num is 1
[   30.205722@0] hdmitx: audio: SPDIF
[   30.205734@0] hdmitx: audio: current VIC: 76
[   30.205738@0] hdmitx: audio: audio sample rate: 2
[   30.205742@0] hdmitx: audio: reset audio N para
[   30.205753@0] hdmitx: audio: PCM out to HDMI
[   30.216976@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.216989@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.216994@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.217002@0] hdmitx: audio: Audio Type: PCM
[   30.217044@0] hdmitx: audio: set audio param
[   30.218514@0] runtime dma_bytes 65536,stream type 1 
[   30.220174@0] runtime dma_bytes 65536,stream type 1 
[   30.221756@0] runtime dma_bytes 65536,stream type 1 
[   30.228580@0] runtime dma_bytes 65536,stream type 0 
[   30.228618@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.228625@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.228632@0] iec958 mode PCM16
[   30.228640@0] IEC958 16bit
[   30.228647@0] hdmitx: audio: aout notify rate 44100
[   30.228652@0] hdmitx: audio: aout notify size 16
[   30.228659@0] hdmitx: audio: audio channel num is 1
[   30.228667@0] hdmitx: audio: SPDIF
[   30.228679@0] hdmitx: audio: current VIC: 76
[   30.228684@0] hdmitx: audio: audio sample rate: 2
[   30.228688@0] hdmitx: audio: reset audio N para
[   30.228699@0] hdmitx: audio: PCM out to HDMI
[   30.240094@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.240110@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.240116@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.240124@0] hdmitx: audio: Audio Type: PCM
[   30.240167@0] hdmitx: audio: set audio param
[   30.240334@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.240344@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.240351@0] iec958 mode PCM16
[   30.240359@0] IEC958 16bit
[   30.240365@0] hdmitx: audio: aout notify rate 44100
[   30.240370@0] hdmitx: audio: aout notify size 16
[   30.240376@0] hdmitx: audio: audio channel num is 1
[   30.240384@0] hdmitx: audio: SPDIF
[   30.240396@0] hdmitx: audio: current VIC: 76
[   30.240401@0] hdmitx: audio: audio sample rate: 2
[   30.240406@0] hdmitx: audio: reset audio N para
[   30.240417@0] hdmitx: audio: PCM out to HDMI
[   30.251647@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.251659@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.251663@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.251671@0] hdmitx: audio: Audio Type: PCM
[   30.251713@0] hdmitx: audio: set audio param
[   30.298744@0] runtime dma_bytes 65536,stream type 1 
[   31.371719@2] alsa capture long time no data, quit xrun!
[   32.391203@2] alsa capture long time no data, quit xrun!
[   33.420702@2] alsa capture long time no data, quit xrun!
[   34.440184@2] alsa capture long time no data, quit xrun!
[   77.808656@3] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
[   77.984072@3] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-lm1-1.4/input2
[   77.989689@3] input: Logitech Unifying Device. Wireless PID:400d as /devices/lm1/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0006/input/input7
[   77.990935@3] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400d] on usb-lm1-1.4:2
[   80.385255@3] usb 1-1.2: USB disconnect, device number 4
[  129.958886@1] config uart_b_ttyS2:: Character length 8bits/char
[  129.961577@1] config uart_b_ttyS2:: Character length 8bits/char
[  130.699242@2] init: plymouth-stop pre-start process (1954) terminated with status 1

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Wed Feb 10, 2016 12:05 am

here the dmsg with dongle unplugged always ubuntu (too much caracters for the first message)

Code: Select all

dmesg
[    0.000000@0] Booting Linux on physical CPU 0x200
[    0.000000@0] Initializing cgroup subsys cpuset
[    0.000000@0] Initializing cgroup subsys cpu
[    0.000000@0] Initializing cgroup subsys cpuacct
[    0.000000@0] Linux version 3.10.80-141 (root@xu3-b2) (gcc version 4.9.2 (Ubuntu/Linaro 4.9.2-0ubuntu1~14.04) ) #1 SMP PREEMPT Wed Jan 27 23:07:36 BRST 2016
[    0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
[    0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000@0] Machine: ODROIDC, model: AMLOGIC
[    0.000000@0] physical memory start address is 0x200000
[    0.000000@0] reserved_end is e3fffff 
[    0.000000@0]  
[    0.000000@0] Total memory is 1022 MiB
[    0.000000@0] Reserved low memory from 0x06000000 to 0x0e3fffff, size: 132 MiB 
[    0.000000@0] 	mesonfb0(low)   	: 0x06100000 - 0x07900000 ( 24 MiB)
[    0.000000@0] 	mesonfb1(low)   	: 0x07900000 - 0x07a00000 (  1 MiB)
[    0.000000@0] 	mesonstream0(low)   	: 0x07a00000 - 0x09a00000 ( 32 MiB)
[    0.000000@0] 	vdec0(low)   	: 0x09a00000 - 0x0da00000 ( 64 MiB)
[    0.000000@0] 	ppmgr0(high)   	: 0x3f000000 - 0x40000000 ( 16 MiB)
[    0.000000@0] 	amvideocap0(low)   	: 0x0da00000 - 0x0e400000 ( 10 MiB)
[    0.000000@0] cma: CMA: reserved 8 MiB at 3e800000
[    0.000000@0] Memory policy: ECC disabled, Data cache writealloc
[    0.000000@0] On node 0 totalpages: 220160
[    0.000000@0] free_area_init_node: node 0, pgdat c09e9c00, node_mem_map c0c83000
[    0.000000@0]   Normal zone: 1520 pages used for memmap
[    0.000000@0]   Normal zone: 0 pages reserved
[    0.000000@0]   Normal zone: 157184 pages, LIFO batch:31
[    0.000000@0]   HighMem zone: 492 pages used for memmap
[    0.000000@0]   HighMem zone: 62976 pages, LIFO batch:15
[    0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
[    0.000000@0] PERCPU: Embedded 8 pages/cpu @c146c000 s8256 r8192 d16320 u32768
[    0.000000@0] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 218640
[    0.000000@0] Kernel command line: root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro console=tty0 console=ttyS0,115200n8 no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=800x600p60hz m_bpp=32 vout=hdmi disableuhs disablehpd=true
[    0.000000@0] cvbs trimming line = 0xa000
[    0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
[    0.000000@0] osd1:1
[    0.000000@0] loaded:268435459
[    0.000000@0] logo has been loaded
[    0.000000@0] 720p:11
[    0.000000@0] full:2
[    0.000000@0] kernel get cvbsmode form uboot is 576cvbs
[    0.000000@0] kernel get hdmimode form uboot is 800x600p60hz
[    0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000@0] allocated 2060288 bytes of page_cgroup
[    0.000000@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000@0] Memory: 64MB 16MB 780MB = 860MB total
[    0.000000@0] Memory: 846504k/846504k available, 34136k reserved, 243712K highmem
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000@0]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000@0]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000@0]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000@0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000@0]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000@0]       .text : 0xc0008000 - 0xc0937cfc   (9408 kB)
[    0.000000@0]       .init : 0xc0938000 - 0xc0970040   ( 225 kB)
[    0.000000@0]       .data : 0xc0972000 - 0xc09eab40   ( 483 kB)
[    0.000000@0]        .bss : 0xc09eab40 - 0xc0c7e6fc   (2639 kB)
[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0] NR_IRQS:256
[    0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000@0] Global timer: MESON TIMER-F (c098d400) initialized
[    0.000000@0] Switching to timer-based delay loop
[    0.000000@0] Console: colour dummy device 80x30
[    0.000000@0] console [tty0] enabled
[    0.000000@0] meson_serial_console_setup
[    0.000000@0] console [ttyS0] enabled
[    0.348810@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.359082@0] pid_max: default: 32768 minimum: 301
[    0.364062@0] Security Framework initialized
[    0.368124@0] AppArmor: AppArmor initialized
[    0.372453@0] Mount-cache hash table entries: 512
[    0.381342@0] Initializing cgroup subsys memory
[    0.381560@0] Initializing cgroup subsys devices
[    0.386100@0] Initializing cgroup subsys freezer
[    0.390748@0] Initializing cgroup subsys blkio
[    0.395105@0] Initializing cgroup subsys perf_event
[    0.400147@0] CPU: Testing write buffer coherency: ok
[    0.405429@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
[    0.410923@0] Setting up static identity map for 0xc0693e40 - 0xc0693e98
[    0.417563@0] L310 cache controller enabled
[    0.421648@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9,  Cache size: 524288 B
[    0.429045@0]       AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL  0x00000000
[    0.437194@0]       TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
[    0.520320@1] CPU1: Booted secondary processor
[    0.520339@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
[    0.540321@2] CPU2: Booted secondary processor
[    0.540338@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
[    0.560318@3] CPU3: Booted secondary processor
[    0.560335@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
[    0.560425@0] Brought up 4 CPUs
[    0.588613@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
[    0.594844@0] CPU: All CPU(s) started in SVC mode.
[    0.600347@0] devtmpfs: initialized
[    0.609556@0] clkrate [ xtal 	] : 24000000
[    0.609603@0] clkrate [ pll_sys 	] : 1200000000
[    0.612557@0] clkrate [ pll_fixed 	] : 2550000000
[    0.617209@0] clkrate [ pll_vid 	] : 732000000
[    0.621636@0] clkrate [ pll_ddr 	] : 0
[    0.625347@0] clkrate [ a9_clk 	] : 1200000000
[    0.629763@0] clkrate [ clk81 	] : 159375000
[    0.634391@0] pinctrl core: initialized pinctrl subsystem
[    0.639588@0] regulator-dummy: no parameters
[    0.644134@0] NET: Registered protocol family 16
[    0.652359@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.656366@0] VPU driver version: v02
[    0.658945@0] load vpu_clk in dts: 182150000Hz(3)
[    0.663672@0] vpu_probe OK
[    0.668196@0] amlogic_gpio gpio: Probed amlogic GPIO driver
[    0.672256@0] register lm device lm-root
[    0.675773@0] register lm device lm1
[    0.679320@0] register lm device lm0
[    0.682925@0] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.691006@0] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.697051@0] Init pinux probe!
[    0.700754@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
[    0.705907@0] tv_init_module
[    0.708736@0] major number 254 for disp
[    0.712558@0] vout_register_server
[    0.715917@0] register tv module server ok
[    0.720063@0] hdmitx: system: amhdmitx_init
[    0.724145@0] hdmitx: system: Ver: 2014May6
[    0.728360@0] hdmitx: system: amhdmitx_probe
[    0.732837@0] hdmitx: system: gate/pwr cmd: 7
[    0.736875@0] hdmitx: system: ALREADY init VIC = 4
[    0.741652@0] hdmitx: system: gate/pwr cmd: 0
[    0.746391@1] hdmitx: system: reset intr mask
[    0.770379@0] hdmitx: system: irq 1
[    0.777292@0] bio: create slab <bio-0> at 0
[    0.777979@0] SCSI subsystem initialized
[    0.779918@0] usbcore: registered new interface driver usbfs
[    0.785451@0] usbcore: registered new interface driver hub
[    0.790937@0] usbcore: registered new device driver usb
[    0.796099@0] media: Linux media interface: v0.10
[    0.800753@0] Linux video capture interface: v2.00
[    0.805888@0] switch_vpu_mem_pd: unsupport vpu mod
[    0.810248@0] unsupport vmod
[    0.813080@0] TV mode 800x600p60hz selected.
[    0.817327@0] tvoutc_setmode[459]
[    0.820635@0] aml_logo: outputmode changed(11->17), reset osd1 scaler.
[    0.847422@0] Advanced Linux Sound Architecture Driver Initialized.
[    0.848465@0] Bluetooth: Core ver 2.16
[    0.851858@0] NET: Registered protocol family 31
[    0.856380@0] Bluetooth: HCI device and connection manager initialized
[    0.862897@0] Bluetooth: HCI socket layer initialized
[    0.867900@0] Bluetooth: L2CAP socket layer initialized
[    0.873121@0] Bluetooth: SCO socket layer initialized
[    0.878269@0] Loading modules backported from Linux version next-20150129-0-g828f79f
[    0.885842@0] Backport integrated by backports.git backports-20150129-0-gdd4a670
[    0.893428@0] cfg80211: Calling CRDA to update world regulatory domain
[    0.900320@0] Switching to clocksource Timer-E
[    0.904420@0] AppArmor: AppArmor Filesystem Enabled
[    0.916449@0] NET: Registered protocol family 2
[    0.917181@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.922664@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.929267@0] TCP: Hash tables configured (established 8192 bind 8192)
[    0.935699@0] TCP: reno registered
[    0.939006@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.945108@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.951766@0] NET: Registered protocol family 1
[    0.956281@0] Unpacking initramfs...
[    1.072701@0] Freeing initrd memory: 2040K (c4e08000 - c5006000)
[    1.073691@0] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 3 counters available
[    1.081898@0] audit: initializing netlink socket (disabled)
[    1.086922@0] type=2000 audit(1.000:1): initialized
[    1.092401@0] bounce pool size: 64 pages
[    1.100760@0] VFS: Disk quotas dquot_6.5.2
[    1.101026@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.108302@0] aufs 3.10.x
[    1.108942@0] msgmni has been set to 1181
[    1.114463@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.120466@0] io scheduler noop registered
[    1.124566@0] io scheduler deadline registered
[    1.129071@0] io scheduler cfq registered (default)
[    1.178278@0] [drm] Initialized drm 1.1.0 20060810
[    1.178446@0] gpu cooling register okay with err=0
[    1.185170@0] Mali: Mali device driver loaded
[    1.186683@0] UMP: UMP device driver -jenkins-deb_kernel_c1-141 loaded
[    1.195885@0] loop: module loaded
[    1.196837@0] tun: Universal TUN/TAP device driver, 1.6
[    1.201531@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.208007@0] PPP generic driver version 2.4.2
[    1.212603@0] usbcore: registered new interface driver usb-storage
[    1.218546@0] usbcore: registered new interface driver usbserial
[    1.224442@0] usbcore: registered new interface driver usbserial_generic
[    1.231081@0] usbserial: USB Serial support registered for generic
[    1.237461@0] mousedev: PS/2 mouse device common for all mice
[    1.243172@0] i2c /dev entries driver
[    1.246922@0] device-mapper: uevent: version 1.0.3
[    1.251594@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.260054@0] Bluetooth: HCI UART driver ver 2.2
[    1.264492@0] Bluetooth: HCI H4 protocol initialized
[    1.269408@0] Bluetooth: HCI BCSP protocol initialized
[    1.274531@0] Bluetooth: HCILL protocol initialized
[    1.279365@0] Bluetooth: HCIATH3K protocol initialized
[    1.284488@0] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[    1.291492@0] ledtrig-cpu: registered to indicate activity on CPUs
[    1.297212@0] hidraw: raw HID events driver (C) Jiri Kosina
[    1.302899@0] usbcore: registered new interface driver usbhid
[    1.308397@0] usbhid: USB HID core driver
[    1.312574@0] efuse===========================================
[    1.318324@0] efuse: device efuse created
[    1.322188@0] efuse--------------------------------------------
[    1.328050@0] vout_init_module
[    1.331090@0] start init vout module 
[    1.334827@0] create  vout attribute ok 
[    1.338839@0] ge2d_init
[    1.341192@0] ge2d_dev major:244
[    1.344642@0] ge2d start monitor
[    1.347844@0] osd_init
[    1.347858@1] ge2d workqueue monitor start
[    1.354332@0] osd_probe, vinfo:c06d40d8
[    1.358379@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
[    1.366244@0] osd_probe, mydef_var:c09c06d0, vinfo:c06d40d8
[    1.371759@0] init fbdev bpp is :32
[    1.375314@0] ---------------clear framebuffer0 memory  
[    1.406687@0] Console: switching to colour frame buffer device 160x90
[    1.419888@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
[    1.427872@0] osd_probe, mydef_var:c09c06d0, vinfo:c06d40d8
[    1.433360@0] don't find to display_size_default from mesonfb-dts
[    1.439444@0] init fbdev bpp is :24
[    1.447031@0] osd probe ok  
[    1.447099@0] hdmitx: video: get current mode: 800x600p60hz
[    1.451458@0] hdmitx: video: get current mode: 800x600p60hz
[    1.457031@0] hdmitx: system: gate/pwr cmd: 7
[    1.461359@0] hdmitx: system: already init VIC = 0  Now VIC = 76
[    1.467329@0] hdmitx: system:  76 (cd0,cs0,pm1,vd0,1) 
[    1.472407@0] hdmitx: system: gate/pwr cmd: 0
[    1.476743@0] hdmitx: system: hw reset
[    1.481483@0] hdmitx: audio: SPDIF
[    1.483866@0] reconfig packet setting done
[    1.507895@0] hdmitx: system: set pll
[    1.507966@0] hdmitx: system: param->VIC:76
[    1.510134@0] mode is: 17
[    1.512709@0] VPU_VIU_VENC_MUX_CTRL: 0xa
[    1.516639@0] viu chan = 1
[    1.519296@0] VPU_VIU_VENC_MUX_CTRL: 0xa
[    1.523205@0] config HPLL
[    1.544142@0] config HPLL done
[    1.544212@0] enc_vpu_bridge_reset[314]
[    1.684139@0] hdmitx: system: phy setting done
[    1.684227@0] hdmi: Fixing to HDMI Mode
[    1.686802@0] hdmi: Sink is HDMI device
[    1.690614@0] hdmi: No sink attached
[    1.694213@0] hdmitx: audio: audio channel num is 0
[    1.699033@0] hdmitx: audio: SPDIF
[    1.702391@0] hdmitx: audio: current VIC: 76
[    1.706652@0] hdmitx: audio: audio sample rate: 0
[    1.711317@0] hdmitx: audio: reset audio N para
[    1.715850@0] hdmitx: audio: PCM out to HDMI
[    1.732485@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[    1.732660@0] hdmitx: audio: i2s_to_spdif_flag:1 
[    1.737337@0] hdmitx: audio: Enable audio spdif to HDMI
[    1.780320@0] amlvideo-000: V4L2 device registered as video10
[    1.780727@0] ionvideo-000: V4L2 device registered as video13
[    1.786269@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
[    1.794661@0] DI: di_init
[    1.794759@0] aml_wdt_driver_init,306
[    1.798233@0] ** disable watchdog
[    1.801592@0] one-secod=7812,min_timeout=1,max_timeout=8,default_timeout=10,reset_watchdog_method=0,reset_watchdog_time=2,shutdown_timeout=10,firmware_timeout=6,suspend_timeout=6
[    1.817768@0] AML Watchdog Timer probed done 
[    1.822004@0] set uart_ao pinmux use pinctrl subsystem
[    1.826845@0] P_AO_RTI_PIN_MUX_REG:1801
[    1.830636@0] start uart_ao_ttyS0:(irq = 122)
[    1.834964@0] register uart_ao ok
[    1.838439@0] set uart_b pinmux use pinctrl subsystem
[    1.843268@0] P_AO_RTI_PIN_MUX_REG:1801
[    1.850525@0] start uart_b_ttyS2:(irq = 107)
[    1.854697@0] register uart_b ok
[    1.858198@0] dwc_otg: version 3.10a 12-MAY-2014
[    1.862498@0] dwc_otg lm-root: dwc_otg_driver_probe(ef343800)
[    1.862509@0] dwc_otg_driver_probe NOT match
[    1.866757@0] dwc_otg lm1: dwc_otg_driver_probe(ef343a00)
[    1.906762@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
[    1.913262@0] USB (1) use clock source: XTAL input
[    1.919073@0] dwc_otg lm1: base=0xfe080000
[    1.919085@0] dwc_otg lm1: dwc_otg_device=0xef5de200
[    1.939211@0] Core Release: 3.10a
[    1.942745@0] Setting default values for core params
[    1.946301@0] curmode: 1, host_only: 1
[    1.949819@0] dwc_otg lm1: DMA config: BURST_DEFAULT
[    1.969974@0] Using Buffer DMA mode
[    1.973457@0] OTG VER PARAM: 1, OTG VER FLAG: 1
[    1.976961@0] Working on port type = HOST
[    1.980644@0] dwc_otg lm1: DWC OTG Controller
[    1.984176@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
[    1.990807@0] dwc_otg lm1: irq 63, io mem 0x00000000
[    1.995712@0] -------hcd->flags.d32 = 0
[    1.999528@0] Init: Port Power? op_state=1
[    2.003577@0] Init1: Power Port (0)
[    2.007579@0] hub 1-0:1.0: USB hub found
[    2.011091@0] hub 1-0:1.0: 1 port detected
[    2.015215@0] dwc_otg lm0: dwc_otg_driver_probe(ef343c00)
[    2.015252@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
[    2.023727@0] USB (0) use clock source: XTAL input
[    2.029491@0] dwc_otg lm0: base=0xfe040000
[    2.029502@0] dwc_otg lm0: dwc_otg_device=0xeea03480
[    2.049597@0] Core Release: 3.10a
[    2.053183@0] Setting default values for core params
[    2.056784@0] curmode: 1, host_only: 0
[    2.100288@0] dwc_otg lm0: DMA config: BURST_DEFAULT
[    2.120445@0] Using Buffer DMA mode
[    2.123950@0] OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.127473@0] Working on port type = OTG
[    2.130960@0] Current port type: SLAVE
[    2.134674@0] dwc_otg lm0: DWC OTG Controller
[    2.138216@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
[    2.144898@0] dwc_otg lm0: irq 62, io mem 0x00000000
[    2.150220@0] hub 2-0:1.0: USB hub found
[    2.153673@0] hub 2-0:1.0: 1 port detected
[    2.157863@0] Dedicated Tx FIFOs mode
[    2.161719@0] using timer detect id change, ef5ae400
[    2.166491@0] ethernet_driver probe!
[    2.169903@0] ethernetinit(dbg[c09c52ec]=1)
[    2.174018@0] ethernet base addr is fe0c0000
[    2.178292@0] write mac add to:ef5e4e48: 00 1e 06 10 34 19 |.\x1e.\x104\x19|
[    2.188838@0] libphy: AMLMAC MII Bus: probed
[    2.192314@0] eth0: PHY ID 001cc916 at 0 IRQ -1 (0:00) active
[    2.196672@0] eth0: PHY ID 001cc916 at 1 IRQ -1 (0:01) active
[    2.202506@0] amvideocap_init_module
[    2.206083@0] amvideocap_probe,amvideocap
[    2.209883@0] amvideocap_dev_register buf:0da00000,size:a00000.
[    2.215861@1] Indeed it is in host mode hprt0 = 00021501
[    2.221239@0] Amlogic A/V streaming port init
[    2.226747@0] init vdec memsource 9a00000->d9fffff
[    2.230417@0] [tsync_pcr_init]init success. 
[    2.234528@0] regist mpeg12 codec profile
[    2.238495@0] regist mpeg4 codec profile
[    2.242328@0] amvdec_vc1 module init
[    2.245934@0] regist vc1 codec profile
[    2.249593@0] amvdec_h264 module init
[    2.253304@0] regist h264 codec profile
[    2.257083@0] amvdec_h265 module init
[    2.260723@0] regist hevc codec profile
[    2.264556@0] regist mjpeg codec profile
[    2.268382@0] amvdec_real module init
[    2.272066@0] regist real codec profile
[    2.275852@0] amvdec_avs module init
[    2.279562@0] regist avc codec profile
[    2.283109@0] jpegenc module init
[    2.286858@0] alloc_keep_buffer keep_y_addr ee600000
[    2.291431@0] alloc_keep_buffer keep_u_addr eeb00000
[    2.296294@0] alloc_keep_buffer keep_v_addr eec00000
[    2.301206@0] yaddr=ee600000,u_addr=eeb00000,v_addr=eec00000
[    2.307129@0] create_ge2d_work_queue video task ok 
[    2.311855@0] SARADC Driver init.
[    2.315460@0] __saradc_probe__
[    2.394167@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.398651@3] Indeed it is in host mode hprt0 = 00001101
[    2.464259@0] saradc calibration: ref_val = 506
[    2.467546@0] saradc calibration: ref_nominal = 512
[    2.471229@0] saradc calibration: coef = 4017
[    2.475791@0] ir irblaster probe
[    2.479230@0] Remote Driver
[    2.482554@0] ==touch_ts_init==
[    2.485864@0] ==ft5x0x_ts_init==
[    2.489072@0] ==goodix_ts_init==
[    2.492274@0] i2c-core: driver [gslx680_compatible] using legacy suspend method
[    2.498337@0] i2c-core: driver [gslx680_compatible] using legacy resume method
[    2.505534@0] !!!ntp_ts: ret = 0. 
[    2.508797@0] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
[    2.515275@0] i2c-core: driver [ct36x] using legacy suspend method
[    2.521381@0] i2c-core: driver [ct36x] using legacy resume method
[    2.527432@0] VTL ct36x TouchScreen driver End.
[    2.531921@0] ==gsl_ts_init==
[    2.535106@0] ret=0
[    2.538408@0] i2c-core: driver [mir3da] using legacy suspend method
[    2.543208@0] i2c-core: driver [mir3da] using legacy resume method
[    2.549419@2] i2c-core: driver [lis3dh_acc] using legacy suspend method
[    2.555920@2] i2c-core: driver [lis3dh_acc] using legacy resume method
[    2.562403@2] i2c-core: driver [bma222] using legacy suspend method
[    2.568602@2] i2c-core: driver [bma222] using legacy resume method
[    2.574795@2] i2c-core: driver [dmard06] using legacy suspend method
[    2.581052@2] i2c-core: driver [dmard06] using legacy resume method
[    2.587318@2] lsm303d driver: init
[    2.590695@2] i2c-core: driver [dmard10] using legacy suspend method
[    2.596210@3] hub 1-1:1.0: USB hub found
[    2.596541@3] hub 1-1:1.0: 4 ports detected
[    2.604989@2] i2c-core: driver [dmard10] using legacy resume method
[    2.611279@2] stk8313_init
[    2.614377@2] ======stk831x init ok======
[    2.617901@2] stk831x_init
[    2.620968@2] mxc622x accelerometer driver: init
[    2.625221@2] i2c-core: driver [mxc622x] using legacy suspend method
[    2.631542@2] i2c-core: driver [mxc622x] using legacy resume method
[    2.637775@2] mxc6255xc accelerometer driver: init
[    2.642538@2] i2c-core: driver [mxc6255xc] using legacy suspend method
[    2.649052@2] i2c-core: driver [mxc6255xc] using legacy resume method
[    2.655519@2] cm3217 v.1.0.0.1
[    2.658645@2] i2c-core: driver [elan_epl6814] using legacy suspend method
[    2.665293@2] i2c-core: driver [elan_epl6814] using legacy resume method
[    2.671949@2] i2c-core: driver [LTR501] using legacy suspend method
[    2.678178@2] i2c-core: driver [LTR501] using legacy resume method
[    2.684436@2] mmc driver version: 1.07, 2014-06-30: eMMC add hw reset function
[    2.692508@2] host->base fe108e00
[    2.695803@2] pdata->caps 107
[    2.698923@2] pdata->caps2 0
[    2.701996@2] get property:                     port, value:0x00000004
[    2.707095@2] get property:                ocr_avail, value:0x00200080
[    2.713544@2] get property:                    f_min, value:0x000493e0
[    2.720054@2] get property:                    f_max, value:0x05f5e100
[    2.726524@2] get property:             max_req_size, value:0x00020000
[    2.732972@2] get property:                   irq_in, value:0x00000003
[    2.739455@2] get property:                  irq_out, value:0x00000005
[    2.745934@2] get property:                  gpio_cd, str:CARD_6
[    2.751873@2] get property:                  pinname, str:sd
[    2.757495@2] get property:                card_type, value:0x00000005
[    2.763996@2] get property:                gpio_dat3, str:CARD_4
[    2.769978@2] get property:               gpio_volsw, str:GPIOAO_3
[    2.776293@2] aml_sd_voltage_switch[1309] : Switched to voltage -> 3.30 V
[    2.834180@0] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    2.874471@3] usb 1-1.1: new low-speed USB device number 3 using dwc_otg
[    2.894143@2] [aml_sdhc_probe] aml_sdhc_probe() success!
[    2.897986@2] host->base fe108c20
[    2.901171@2] pdata->caps 80000507
[    2.904314@2] pdata->caps2 1
[    2.907416@2] get property:                     port, value:0x00000002
[    2.912966@2] get property:                ocr_avail, value:0x00200000
[    2.919468@2] get property:                    f_min, value:0x000493e0
[    2.925955@2] get property:                    f_max, value:0x02faf080
[    2.932409@2] get property:                  f_max_w, value:0x02faf080
[    2.938918@2] get property:             max_req_size, value:0x00020000
[    2.945435@2] get property:                  pinname, str:emmc
[    2.951191@2] get property:                card_type, value:0x00000001
[    2.957696@2] get property:                gpio_dat3, str:BOOT_3
[    2.963636@2] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=1
[    2.982073@3] input: PixArt USB Optical Mouse as /devices/lm1/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[    2.989110@3] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-lm1-1.1/input0
[    3.013438@1] sd: new high speed SDHC card at address 59b4, clock 50000000, 4-bit-bus-width
[    3.019798@1] mmcblk0: sd:59b4 NCard 14.9 GiB 
[    3.024804@1]  mmcblk0: p1 p2
[    3.028658@1] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    3.033604@1] aml_emmc_hw_reset 1379
[    3.064162@2] [aml_sdio_probe] aml_sdio_probe() success!
[    3.067689@2] [dsp]DSP start addr 0xc5e00000
[    3.071501@2] [dsp]register dsp to char divece(257)
[    3.077383@2] aml_rtc rtc.1: rtc core: registered aml_rtc as rtc0
[    3.083854@2] amlogic rfkill init
[    3.087445@2] Bluetooth: btwake_control_init Driver Ver 1.1
[    3.091629@2] aml_hw_crypto initialization.
[    3.096549@2] pcm5102_platform_probe
[    3.100297@2] enter aml_i2s_dai_probe
[    3.100307@2] i2s get no clk src setting in dts, use the default mpll 0
[    3.105727@2] enter aml_pcm_dai_probe
[    3.105932@2] enter spdif_dit_probe 
[    3.109378@2] aml_spdif_unmute 
[    3.113779@2] aml-i2s 0:playback preallocate_dma_buffer: area=f0516000, addr=3ec40000, size=65536
[    3.121489@2] aml-i2s 1:capture preallocate_dma_buffer: area=f0528000, addr=3ec60000, size=65536
[    3.129946@2] aml_snd_m8 aml_m8_sound_card.4:  dit-hifi <-> aml-spdif-dai.0 mapping ok
[    3.138870@2] GACT probability NOT on
[    3.142484@2] Mirror/redirect action on
[    3.146726@2] NET: Registered protocol family 10
[    3.151057@2] mip6: Mobile IPv6
[    3.154705@2] sit: IPv6 over IPv4 tunneling driver
[    3.159267@2] NET: Registered protocol family 17
[    3.162964@2] NET: Registered protocol family 15
[    3.166999@2] Bridge firewalling registered
[    3.171182@2] Bluetooth: RFCOMM TTY layer initialized
[    3.176108@2] Bluetooth: RFCOMM socket layer initialized
[    3.181343@2] Bluetooth: RFCOMM ver 1.11
[    3.185210@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.190647@2] Bluetooth: BNEP filters: protocol multicast
[    3.196040@2] Bluetooth: BNEP socket layer initialized
[    3.201122@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.207225@2] Bluetooth: HIDP socket layer initialized
[    3.212303@2] NET: Registered protocol family 35
[    3.217420@2] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
[    3.224735@2] Registering SWP/SWPB emulation handler
[    3.229782@2] pm-meson: probe of aml_pm_m8 failed with error -1
[    3.236053@2] registered taskstats version 1
[    3.239871@2] regulator-dummy: disabling
[    3.243877@2] Mali DRM initialize, driver name: mali_drm, version 2.1
[    3.250441@2] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
[    3.256335@2] Mali DRM initialize, driver name: mali_drm, version 2.1
[    3.262950@2] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
[    3.269480@2] aml_rtc rtc.1: setting system clock to 2016-02-09 14:35:57 UTC (1455028557)
[    3.277092@2] ### dt-test ### No testcase data in device tree; not running tests
[    3.284463@3] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[    3.284564@2] meson_cpufreq_probe:SYSPLL request to be fixed
[    3.284567@2] meson_cpufreq: no voltage_control prop
[    3.284570@2] voltage_control = 0
[    3.285395@2] <<-GTP-INFO->> GTP driver installing...
[    3.285604@2] buf[0]=f1,buf[1]=af,err=4
[    3.285607@2] adc=383,TS_C=17,flag=1
[    3.285608@2] efuse_flag=a
[    3.285612@2] amlogic_thermal_probe, this chip is trimmed, use thermal
[    3.285617@2] amlogic-thermal aml_thermal: amlogic thermal probe start
[    3.285621@2] #thermal-cells=7
[    3.285623@2] pdata->temp_trip_count=4
[    3.285626@2] temperature=70 on trip point=0
[    3.285633@2] fixing high_freq=1488001 to 1488000 at trip point 0,level=3
[    3.285638@2] fixing low_freq=1488001 to 1488000 at trip point 0,level=3
[    3.285640@2] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
[    3.285642@2] cpu[0] core num==3
[    3.285643@2] gpu[0] core num==2
[    3.285645@2] temperature=80 on trip point=1
[    3.285649@2] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
[    3.285654@2] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
[    3.285656@2] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
[    3.285658@2] cpu[1] core num==2
[    3.285659@2] gpu[1] core num==2
[    3.285661@2] temperature=90 on trip point=2
[    3.285665@2] fixing high_freq=800001 to 696000 at trip point 2,level=11
[    3.285669@2] fixing low_freq=800001 to 696000 at trip point 2,level=11
[    3.285672@2] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
[    3.285674@2] cpu[2] core num==1
[    3.285675@2] gpu[2] core num==1
[    3.285677@2] temperature=110 on trip point=3
[    3.285681@2] fixing high_freq=-1 to -22 at trip point 3,level=-1
[    3.285685@2] fixing low_freq=-1 to -22 at trip point 3,level=-1
[    3.285688@2] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
[    3.285689@2] cpu[3] core num==-1
[    3.285691@2] gpu[3] core num==-1
[    3.285693@2] idle interval=1000
[    3.285695@2] pdata->name:aml_thermal
[    3.285883@2] tmp_trip[0].cpu_core_upper=1
[    3.285893@2] tmp_trip[1].cpu_core_upper=2
[    3.285902@2] tmp_trip[2].cpu_core_upper=3
[    3.285910@2] tmp_trip[3].cpu_core_upper=-1
[    3.285918@2] aml_thermal bind thermal-cpucore-0 okay !
[    3.285949@2] aml_thermal bind thermal-cpufreq-0 okay !
[    3.285954@2] pdata->tmp_trip[0].gpu_lower_level=1
[    3.285955@2] pdata->tmp_trip[0].gpu_upper_level=1
[    3.285964@2] pdata->tmp_trip[1].gpu_lower_level=2
[    3.285966@2] pdata->tmp_trip[1].gpu_upper_level=2
[    3.285975@2] pdata->tmp_trip[2].gpu_lower_level=4
[    3.285976@2] pdata->tmp_trip[2].gpu_upper_level=4
[    3.285985@2] pdata->tmp_trip[3].gpu_lower_level=-1
[    3.285987@2] pdata->tmp_trip[3].gpu_upper_level=-1
[    3.285996@2] aml_thermal bind thermal-gpufreq-0 okay !
[    3.286125@2] amlogic: Kernel Thermal management registered
[    3.286130@2] amlogic-thermal aml_thermal: amlogic thermal probe done
[    3.286174@2] hdmitx: cec: CEC init
[    3.286253@1] hdmitx: cec: CEC task process
[    3.286389@2] input: cec_input as /devices/virtual/input/input1
[    3.286542@2] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[    3.286543@2] ALSA device list:
[    3.286546@2]   #0: ODROID-HDMI
[    3.573604@2] config uart_ao_ttyS0:: Character length 8bits/char
[    3.584148@2] Changing uart_ao_ttyS0: baud from 0 to 115200
[    3.604346@2] Freeing unused kernel memory: 224K (c0938000 - c0970000)
[    3.659855@3] systemd-udevd[113]: starting version 204
[    3.683860@3] input: SEM USB Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
[    3.689753@3] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-lm1-1.3/input0
[    3.704754@3] input: SEM USB Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.1/input/input3
[    3.710665@3] hid-generic 0003:1A2C:0E24.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-lm1-1.3/input1
[    3.748737@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.751790@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.764216@0] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.768886@0] mmcblk0: r/w command failed, status = 0x80000b00
[    3.774046@0] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.780884@0] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.787556@0] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.797587@0] mmcblk0: r/w command failed, status = 0x80000b00
[    3.804844@2] tvmode set to 800x600p60hz
[    3.804844@2] 
[    3.804855@2] don't set the same mode as current.
[    3.816746@0] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.816754@0] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.816763@0] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.817482@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.817488@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.817493@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.817499@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.818126@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.818131@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.818136@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.818141@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.819067@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.819072@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.819077@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.819083@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.820177@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.820183@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.820188@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.820193@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.830490@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.830499@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.830505@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.831123@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.831129@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.831134@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    3.831140@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    3.831782@1] mmcblk0: r/w command failed, status = 0x80000b00
[    3.831788@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
[    3.831793@1] end_request: I/O error, dev mmcblk0, sector 31291384
[    4.013574@2] tvmode set to 800x600p60hz
[    4.013574@2] 
[    4.019159@2] don't set the same mode as current.
[    4.127262@1] force enable DISCARD here for ext4 fs
[    4.170685@1] checked enable EXT4 DISCARD here
[    4.173522@1] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard
[    4.184910@1] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.728433@0] config uart_ao_ttyS0:: Character length 8bits/char
[    4.786799@1] init: plymouth-upstart-bridge main process (169) terminated with status 1
[    4.792829@1] init: plymouth-upstart-bridge main process ended, respawning
[    4.803762@2] config uart_ao_ttyS0:: Character length 8bits/char
[    4.831903@2] init: plymouth-upstart-bridge main process (178) terminated with status 1
[    4.838160@2] init: plymouth-upstart-bridge main process ended, respawning
[    4.846456@3] config uart_ao_ttyS0:: Character length 8bits/char
[    4.862745@3] init: plymouth-upstart-bridge main process (181) terminated with status 1
[    4.868309@3] init: plymouth-upstart-bridge main process ended, respawning
[    4.883305@0] config uart_ao_ttyS0:: Character length 8bits/char
[    4.897027@2] init: plymouth-upstart-bridge main process (183) terminated with status 1
[    4.902590@2] init: plymouth-upstart-bridge main process ended, respawning
[    4.915102@3] config uart_ao_ttyS0:: Character length 8bits/char
[    4.934081@1] init: plymouth-upstart-bridge main process (185) terminated with status 1
[    4.939755@1] init: plymouth-upstart-bridge main process ended, respawning
[    4.957569@1] config uart_ao_ttyS0:: Character length 8bits/char
[    5.769008@3] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    6.501140@2] systemd-udevd[333]: starting version 204
[    6.568508@0] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    6.692204@0] fuse init (API version 7.22)
[    6.909652@1] aml_gpio_probe : success
[    7.045331@1] emmc: mmc_rescan_try_freq: trying to init card at 300000 Hz
[    7.061512@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.065296@1] quiet_error: 1 callbacks suppressed
[    7.065311@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.084265@3] aml_emmc_hw_reset 1379
[    7.152796@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.156056@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.172774@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.176109@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.196501@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.200878@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.214906@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.218069@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.242440@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.245655@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.264600@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.267756@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.385683@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.389117@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.411173@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.414579@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.430250@1] mmcblk0: r/w command failed, status = 0x80000b00
[    7.433797@1] Buffer I/O error on device mmcblk0, logical block 3911423
[    7.797606@0] ionvideo open
[    7.797800@0] ionvideo_stop_generating!!!!
[    7.797827@0] ionvideo release
[    9.184463@0] config uart_b_ttyS2:: Character length 8bits/char
[    9.204183@2] Changing uart_b_ttyS2: baud from 0 to 115200
[    9.228838@2] config uart_b_ttyS2:: Character length 8bits/char
[   10.150430@2] netdev_open
[   10.150443@2] Ethernet reset
[   10.150472@2] NET MDA descpter start addr=ed300000
[   10.285437@2] phy_interface = 0
[   10.285451@2] aml_phy_init:  trying to attach to 0:01
[   10.285621@2] am_rtl811f called phy reset
[    7.795029@2] amlvideo openamlvideo close
[   10.304268@2] --1--write mac add to:ef5e4e48: 00 1e 06 10 34 19 |.\x1e.\x104\x19|
[   10.304306@2] --2--write mac add to:ef5e4e48: 00 1e 06 10 34 19 |.\x1e.\x104\x19|
[   10.304331@2] write mac add to:ef5e4e48: 00 1e 06 10 34 19 |.\x1e.\x104\x19|
[   10.304365@2] Current DMA mode=0, set mode=621c100
[   10.304406@2] eth0: opened (irq 40).
[   10.314689@2] ether leave promiscuous mode
[   10.314701@2] ether leave all muticast mode
[   10.314858@2] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.551708@2] Registered IR keymap rc-empty
[   11.553646@2] input: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0/input4
[   11.554669@2] rc0: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0
[   11.611955@3] meson-ir c8100580.meson-ir: receiver initialized
[   11.616213@2] IR RC5(x) protocol handler initialized
[   11.618293@3] lirc_dev: IR Remote Control driver registered, major 238 
[   11.619220@2] IR NEC protocol handler initialized
[   11.620124@1] IR Sony protocol handler initialized
[   11.621318@2] IR JVC protocol handler initialized
[   11.623172@2] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input5
[   11.623497@2] IR MCE Keyboard/mouse protocol handler initialized
[   11.629013@3] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
[   11.629042@3] IR LIRC bridge handler initialized
[   11.629506@2] IR SANYO protocol handler initialized
[   11.629986@2] IR RC6 protocol handler initialized
[   11.947446@1] input: lircd as /devices/virtual/input/input6
[   12.641589@0] init: plymouth-upstart-bridge main process ended, respawning
[   13.036266@1] create_disp_get_ump_secure_id******0
[   13.036973@1] create_disp_get_ump_secure_id******1
[   14.304271@2] [adjust link] -> eth: full-duplex
[   14.304288@2] [adjust link] -> eth: phy_speed <> priv_speed)
[   14.304304@2] [adjust link -> eth: am_adjust_link state change (new_state=true)
[   14.304312@2] libphy: 0:01 - Link is Up - 1000/Full
[   14.304370@2] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   24.677937@1] runtime dma_bytes 65536,stream type 0 
[   24.678212@1] ----aml_hw_iec958_init,runtime->rate=44100--
[   24.678225@1] audio_set_958_clk, freq=5,
[   24.678233@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   24.678239@1] iec958 mode PCM16
[   24.678248@1] IEC958 16bit
[   24.678255@1] hdmitx: audio: aout notify rate 44100
[   24.678261@1] hdmitx: audio: aout notify size 16
[   24.678266@1] hdmitx: audio: aout notify format CT_PCM
[   24.678273@1] hdmitx: audio: audio channel num is 1
[   24.678282@1] hdmitx: audio: SPDIF
[   24.678293@1] hdmitx: audio: current VIC: 76
[   24.678298@1] hdmitx: audio: audio sample rate: 2
[   24.678303@1] hdmitx: audio: reset audio N para
[   24.678313@1] hdmitx: audio: PCM out to HDMI
[   24.698156@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   24.698172@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   24.698177@0] hdmitx: audio: Enable audio spdif to HDMI
[   24.698186@0] hdmitx: audio: Audio Type: PCM
[   24.698235@0] hdmitx: audio: set audio param
[   24.698454@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   24.698465@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   24.698472@0] iec958 mode PCM16
[   24.698480@0] IEC958 16bit
[   24.698487@0] hdmitx: audio: aout notify rate 44100
[   24.698492@0] hdmitx: audio: aout notify size 16
[   24.698499@0] hdmitx: audio: audio channel num is 1
[   24.698506@0] hdmitx: audio: SPDIF
[   24.698519@0] hdmitx: audio: current VIC: 76
[   24.698523@0] hdmitx: audio: audio sample rate: 2
[   24.698528@0] hdmitx: audio: reset audio N para
[   24.698539@0] hdmitx: audio: PCM out to HDMI
[   24.725353@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   24.725370@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   24.725375@0] hdmitx: audio: Enable audio spdif to HDMI
[   24.725383@0] hdmitx: audio: Audio Type: PCM
[   24.725427@0] hdmitx: audio: set audio param
[   24.798128@2] The PHY does not support set_wol, was CONFIG_MICREL_PHY enabled?
[   24.805419@0] runtime dma_bytes 65536,stream type 1 
[   25.894108@1] alsa capture long time no data, quit xrun!
[   26.914104@1] alsa capture long time no data, quit xrun!
[   27.698505@2] init: plymouth-stop pre-start process (1691) terminated with status 1
[   27.933990@1] alsa capture long time no data, quit xrun!
[   28.953472@1] alsa capture long time no data, quit xrun!
[   29.972979@1] alsa capture long time no data, quit xrun!
[   30.076802@0] runtime dma_bytes 65536,stream type 1 
[   30.123641@0] runtime dma_bytes 65536,stream type 1 
[   30.127066@0] runtime dma_bytes 65536,stream type 1 
[   30.128688@0] runtime dma_bytes 65536,stream type 0 
[   30.128724@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.128731@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.128738@0] iec958 mode PCM16
[   30.128745@0] IEC958 16bit
[   30.128753@0] hdmitx: audio: aout notify rate 44100
[   30.128758@0] hdmitx: audio: aout notify size 16
[   30.128764@0] hdmitx: audio: audio channel num is 0
[   30.128773@0] hdmitx: audio: SPDIF
[   30.128784@0] hdmitx: audio: current VIC: 76
[   30.128789@0] hdmitx: audio: audio sample rate: 2
[   30.128793@0] hdmitx: audio: reset audio N para
[   30.128804@0] hdmitx: audio: PCM out to HDMI
[   30.140077@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.140091@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.140096@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.140105@0] hdmitx: audio: Audio Type: PCM
[   30.140147@0] hdmitx: audio: set audio param
[   30.140307@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.140316@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.140323@0] iec958 mode PCM16
[   30.140330@0] IEC958 16bit
[   30.140338@0] hdmitx: audio: aout notify rate 44100
[   30.140343@0] hdmitx: audio: aout notify size 16
[   30.140348@0] hdmitx: audio: audio channel num is 0
[   30.140356@0] hdmitx: audio: SPDIF
[   30.140368@0] hdmitx: audio: current VIC: 76
[   30.140372@0] hdmitx: audio: audio sample rate: 2
[   30.140377@0] hdmitx: audio: reset audio N para
[   30.140387@0] hdmitx: audio: PCM out to HDMI
[   30.151632@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.151644@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.151649@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.151658@0] hdmitx: audio: Audio Type: PCM
[   30.151699@0] hdmitx: audio: set audio param
[   30.165193@0] runtime dma_bytes 65536,stream type 1 
[   30.166928@0] runtime dma_bytes 65536,stream type 1 
[   30.168539@0] runtime dma_bytes 65536,stream type 1 
[   30.170356@0] runtime dma_bytes 65536,stream type 0 
[   30.170393@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.170400@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.170407@0] iec958 mode PCM16
[   30.170415@0] IEC958 16bit
[   30.170423@0] hdmitx: audio: aout notify rate 44100
[   30.170428@0] hdmitx: audio: aout notify size 16
[   30.170435@0] hdmitx: audio: audio channel num is 1
[   30.170443@0] hdmitx: audio: SPDIF
[   30.170455@0] hdmitx: audio: current VIC: 76
[   30.170460@0] hdmitx: audio: audio sample rate: 2
[   30.170464@0] hdmitx: audio: reset audio N para
[   30.170475@0] hdmitx: audio: PCM out to HDMI
[   30.181730@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.181743@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.181748@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.181756@0] hdmitx: audio: Audio Type: PCM
[   30.181798@0] hdmitx: audio: set audio param
[   30.181938@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.181946@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.181953@0] iec958 mode PCM16
[   30.181960@0] IEC958 16bit
[   30.181967@0] hdmitx: audio: aout notify rate 44100
[   30.181973@0] hdmitx: audio: aout notify size 16
[   30.181978@0] hdmitx: audio: audio channel num is 1
[   30.181986@0] hdmitx: audio: SPDIF
[   30.181998@0] hdmitx: audio: current VIC: 76
[   30.182002@0] hdmitx: audio: audio sample rate: 2
[   30.182007@0] hdmitx: audio: reset audio N para
[   30.182017@0] hdmitx: audio: PCM out to HDMI
[   30.193321@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.193335@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.193339@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.193347@0] hdmitx: audio: Audio Type: PCM
[   30.193390@0] hdmitx: audio: set audio param
[   30.194758@0] runtime dma_bytes 65536,stream type 1 
[   30.196205@0] runtime dma_bytes 65536,stream type 1 
[   30.197810@0] runtime dma_bytes 65536,stream type 1 
[   30.205061@0] runtime dma_bytes 65536,stream type 0 
[   30.205096@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.205103@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.205110@0] iec958 mode PCM16
[   30.205117@0] IEC958 16bit
[   30.205125@0] hdmitx: audio: aout notify rate 44100
[   30.205130@0] hdmitx: audio: aout notify size 16
[   30.205136@0] hdmitx: audio: audio channel num is 1
[   30.205145@0] hdmitx: audio: SPDIF
[   30.205157@0] hdmitx: audio: current VIC: 76
[   30.205162@0] hdmitx: audio: audio sample rate: 2
[   30.205166@0] hdmitx: audio: reset audio N para
[   30.205177@0] hdmitx: audio: PCM out to HDMI
[   30.216417@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.216430@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.216435@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.216443@0] hdmitx: audio: Audio Type: PCM
[   30.216485@0] hdmitx: audio: set audio param
[   30.216643@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   30.216652@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   30.216659@0] iec958 mode PCM16
[   30.216666@0] IEC958 16bit
[   30.216673@0] hdmitx: audio: aout notify rate 44100
[   30.216678@0] hdmitx: audio: aout notify size 16
[   30.216684@0] hdmitx: audio: audio channel num is 1
[   30.216691@0] hdmitx: audio: SPDIF
[   30.216704@0] hdmitx: audio: current VIC: 76
[   30.216709@0] hdmitx: audio: audio sample rate: 2
[   30.216713@0] hdmitx: audio: reset audio N para
[   30.216724@0] hdmitx: audio: PCM out to HDMI
[   30.227953@0] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   30.227968@0] hdmitx: audio: i2s_to_spdif_flag:1 
[   30.227973@0] hdmitx: audio: Enable audio spdif to HDMI
[   30.227981@0] hdmitx: audio: Audio Type: PCM
[   30.228023@0] hdmitx: audio: set audio param
[   30.273716@0] runtime dma_bytes 65536,stream type 1 
[   31.342310@2] alsa capture long time no data, quit xrun!
[   32.361794@2] alsa capture long time no data, quit xrun!
[   33.381254@2] alsa capture long time no data, quit xrun!
[   34.400764@2] alsa capture long time no data, quit xrun!
[  129.914934@0] init: failsafe main process (737) killed by TERM signal
[  130.019699@1] config uart_b_ttyS2:: Character length 8bits/char
[  130.022352@1] config uart_b_ttyS2:: Character length 8bits/char
[  130.690429@0] init: plymouth-stop pre-start process (2048) terminated with status 1
I'll be back in minutes for the gamestation turbo.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Wed Feb 10, 2016 12:20 am

So now lsmod lsusb and dmesg under gamestationturbo with receiver unplugged

Code: Select all

lsmod
Module                  Size  Used by
nls_cp437               5134  1 
w1_gpio                 3178  0 
aml_gpio                7315  0 
wire                   20485  1 w1_gpio
snd_seq_midi            4673  0 
snd_seq_midi_event      5811  1 snd_seq_midi
snd_seq                50416  2 snd_seq_midi_event,snd_seq_midi
snd_rawmidi            19275  1 snd_seq_midi
snd_seq_device          5902  3 snd_seq,snd_rawmidi,snd_seq_midi
fuse                   72461  3 
autofs4                22325  2 
odroid@gamestation-turbo:~$ lsusb
Bus 001 Device 004: ID 1a2c:0e24 China Resource Semico Co., Ltd 
Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
odroid@gamestation-turbo:~$ dmesg
[    0.000000] Booting Linux on physical CPU 0x200
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.80 (root@odroid-wheezy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP PREEMPT Wed Jan 20 16:18:02 CET 2016
[    0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: ODROIDC, model: AMLOGIC
[    0.000000] physical memory start address is 0x200000
[    0.000000] reserved_end is e3fffff 
 
[    0.000000] Total memory is 1022 MiB
[    0.000000] Reserved low memory from 0x06000000 to 0x0e3fffff, size: 132 MiB 
[    0.000000] 	mesonfb0(low)   	: 0x06100000 - 0x07900000 ( 24 MiB)
[    0.000000] 	mesonfb1(low)   	: 0x07900000 - 0x07a00000 (  1 MiB)
[    0.000000] 	mesonstream0(low)   	: 0x07a00000 - 0x09a00000 ( 32 MiB)
[    0.000000] 	vdec0(low)   	: 0x09a00000 - 0x0da00000 ( 64 MiB)
[    0.000000] 	ppmgr0(high)   	: 0x3f000000 - 0x40000000 ( 16 MiB)
[    0.000000] 	amvideocap0(low)   	: 0x0da00000 - 0x0e400000 ( 10 MiB)
[    0.000000] cma: CMA: reserved 8 MiB at 3e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 220160
[    0.000000] free_area_init_node: node 0, pgdat c09e8e40, node_mem_map c0cef000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 157184 pages, LIFO batch:31
[    0.000000]   HighMem zone: 492 pages used for memmap
[    0.000000]   HighMem zone: 62976 pages, LIFO batch:15
[    0.000000] Meson chip version = RevA (1B:A - 0:B72)
[    0.000000] PERCPU: Embedded 8 pages/cpu @c14d8000 s8384 r8192 d16192 u32768
[    0.000000] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 218640
[    0.000000] Kernel command line: root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro console=tty0 console=ttyS0,115200n8 no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=800x600p60hz m_bpp=32 vout=hdmi disableuhs disablehpd=true
[    0.000000] cvbs trimming line = 0xa000
[    0.000000] cvbs trimming.1.v5: 0xa0, 0x0
[    0.000000] osd1:1
[    0.000000] loaded:268435459
[    0.000000] logo has been loaded
[    0.000000] 720p:11
[    0.000000] full:2
[    0.000000] kernel get cvbsmode form uboot is 576cvbs
[    0.000000] kernel get hdmimode form uboot is 800x600p60hz
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 2060288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 64MB 16MB 780MB = 860MB total
[    0.000000] Memory: 845668k/845668k available, 34972k reserved, 243712K highmem
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc093830c   (9409 kB)
      .init : 0xc0939000 - 0xc09710c0   ( 225 kB)
      .data : 0xc0972000 - 0xc09e9d80   ( 480 kB)
       .bss : 0xc09e9d80 - 0xc0cea574   (3074 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Global timer: MESON TIMER-F (c098d100) initialized
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] meson_serial_console_setup
[    0.000000] console [ttyS0] enabled
[    0.347262] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.357534] pid_max: default: 32768 minimum: 301
[    0.362526] Security Framework initialized
[    0.366570] AppArmor: AppArmor initialized
[    0.370902] Mount-cache hash table entries: 512
[    0.380915] Initializing cgroup subsys memory
[    0.381019] Initializing cgroup subsys devices
[    0.384552] Initializing cgroup subsys freezer
[    0.389135] Initializing cgroup subsys blkio
[    0.393609] Initializing cgroup subsys perf_event
[    0.398552] CPU: Testing write buffer coherency: ok
[    0.403885] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
[    0.409317] Setting up static identity map for 0xc0683d68 - 0xc0683dc0
[    0.416074] L310 cache controller enabled
[    0.420103] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9,  Cache size: 524288 B
[    0.427499]       AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL  0x00000000
[    0.435649]       TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
[    0.520326] CPU1: Booted secondary processor
[    0.520345] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
[    0.540327] CPU2: Booted secondary processor
[    0.540345] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
[    0.560323] CPU3: Booted secondary processor
[    0.560342] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
[    0.560438] Brought up 4 CPUs
[    0.588627] SMP: Total of 4 processors activated (8.00 BogoMIPS).
[    0.594858] CPU: All CPU(s) started in SVC mode.
[    0.600405] devtmpfs: initialized
[    0.609971] clkrate [ xtal 	] : 24000000
[    0.610045] clkrate [ pll_sys 	] : 1200000000
[    0.612950] clkrate [ pll_fixed 	] : 2550000000
[    0.617624] clkrate [ pll_vid 	] : 732000000
[    0.622053] clkrate [ pll_ddr 	] : 0
[    0.625763] clkrate [ a9_clk 	] : 1200000000
[    0.630193] clkrate [ clk81 	] : 159375000
[    0.634880] pinctrl core: initialized pinctrl subsystem
[    0.640069] regulator-dummy: no parameters
[    0.644520] NET: Registered protocol family 16
[    0.653067] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.656945] VPU driver version: v02
[    0.659360] load vpu_clk in dts: 182150000Hz(3)
[    0.664090] vpu_probe OK
[    0.669027] amlogic_gpio gpio: Probed amlogic GPIO driver
[    0.672774] register lm device lm-root
[    0.676208] register lm device lm1
[    0.679749] register lm device lm0
[    0.683346] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.691422] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.697479] Init pinux probe!
[    0.701179] pinmux-m8b pinmux: Probed amlogic pinctrl driver
[    0.706327] tv_init_module
[    0.709152] major number 254 for disp
[    0.712974] vout_register_server
[    0.716332] register tv module server ok
[    0.720476] hdmitx: system: amhdmitx_init
[    0.724560] hdmitx: system: Ver: 2014May6
[    0.728781] hdmitx: system: amhdmitx_probe
[    0.733301] hdmitx: system: gate/pwr cmd: 7
[    0.737290] hdmitx: system: ALREADY init VIC = 4
[    0.742069] hdmitx: system: gate/pwr cmd: 0
[    0.746818] hdmitx: system: reset intr mask
[    0.770386] hdmitx: system: irq 1
[    0.780113] bio: create slab <bio-0> at 0
[    0.780868] SCSI subsystem initialized
[    0.782752] usbcore: registered new interface driver usbfs
[    0.788243] usbcore: registered new interface driver hub
[    0.793766] usbcore: registered new device driver usb
[    0.798931] media: Linux media interface: v0.10
[    0.803585] Linux video capture interface: v2.00
[    0.808738] switch_vpu_mem_pd: unsupport vpu mod
[    0.813068] unsupport vmod
[    0.815911] TV mode 800x600p60hz selected.
[    0.820163] tvoutc_setmode[459]
[    0.823444] aml_logo: outputmode changed(11->17), reset osd1 scaler.
[    0.850376] Advanced Linux Sound Architecture Driver Initialized.
[    0.851490] Bluetooth: Core ver 2.16
[    0.854774] NET: Registered protocol family 31
[    0.859333] Bluetooth: HCI device and connection manager initialized
[    0.865857] Bluetooth: HCI socket layer initialized
[    0.870869] Bluetooth: L2CAP socket layer initialized
[    0.876065] Bluetooth: SCO socket layer initialized
[    0.881249] Loading modules backported from Linux version next-20150129-0-g828f79f
[    0.888781] Backport integrated by backports.git backports-20150129-0-gdd4a670
[    0.896404] cfg80211: Calling CRDA to update world regulatory domain
[    0.903375] Switching to clocksource Timer-E
[    0.907408] AppArmor: AppArmor Filesystem Enabled
[    0.920740] NET: Registered protocol family 2
[    0.921507] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.926956] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.933554] TCP: Hash tables configured (established 8192 bind 8192)
[    0.939992] TCP: reno registered
[    0.943296] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.949400] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.956068] NET: Registered protocol family 1
[    0.960569] Unpacking initramfs...
[    1.106462] Freeing initrd memory: 2444K (c4e08000 - c506b000)
[    1.107605] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 3 counters available
[    1.115729] audit: initializing netlink socket (disabled)
[    1.120682] type=2000 audit(1.020:1): initialized
[    1.126243] bounce pool size: 64 pages
[    1.134570] VFS: Disk quotas dquot_6.5.2
[    1.134844] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.142147] aufs 3.10.x
[    1.142705] msgmni has been set to 1180
[    1.148178] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.154227] io scheduler noop registered
[    1.158332] io scheduler deadline registered
[    1.162834] io scheduler cfq registered (default)
[    1.220728] [drm] Initialized drm 1.1.0 20060810
[    1.220946] gpu cooling register okay with err=0
[    1.227526] Mali: Mali device driver loaded
[    1.229151] UMP: UMP device driver -v3.10.59-4500-ga164240 loaded
[    1.238623] loop: module loaded
[    1.239216] tun: Universal TUN/TAP device driver, 1.6
[    1.243719] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.250209] PPP generic driver version 2.4.2
[    1.254809] usbcore: registered new interface driver usb-storage
[    1.260730] usbcore: registered new interface driver usbserial
[    1.266607] usbcore: registered new interface driver usbserial_generic
[    1.273289] usbserial: USB Serial support registered for generic
[    1.279684] mousedev: PS/2 mouse device common for all mice
[    1.285363] i2c /dev entries driver
[    1.289102] device-mapper: uevent: version 1.0.3
[    1.293785] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.302232] Bluetooth: HCI UART driver ver 2.2
[    1.306664] Bluetooth: HCI H4 protocol initialized
[    1.311613] Bluetooth: HCI BCSP protocol initialized
[    1.316707] Bluetooth: HCILL protocol initialized
[    1.321570] Bluetooth: HCIATH3K protocol initialized
[    1.326664] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[    1.333742] ledtrig-cpu: registered to indicate activity on CPUs
[    1.339388] hidraw: raw HID events driver (C) Jiri Kosina
[    1.345106] usbcore: registered new interface driver usbhid
[    1.350586] usbhid: USB HID core driver
[    1.354778] efuse===========================================
[    1.360533] efuse: device efuse created
[    1.364373] efuse--------------------------------------------
[    1.370240] vout_init_module
[    1.373276] start init vout module 
[    1.377008] create  vout attribute ok 
[    1.381051] ge2d_init
[    1.383382] ge2d_dev major:244
[    1.386824] ge2d start monitor
[    1.390064] osd_init
[    1.390077] ge2d workqueue monitor start
[    1.396496] osd_probe, vinfo:c06c5ad8
[    1.400590] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
[    1.408438] osd_probe, mydef_var:c09bf5ec, vinfo:c06c5ad8
[    1.413948] init fbdev bpp is :32
[    1.417508] ---------------clear framebuffer0 memory  
[    1.443048] Console: switching to colour frame buffer device 160x90
[    1.454274] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
[    1.462250] osd_probe, mydef_var:c09bf5ec, vinfo:c06c5ad8
[    1.467758] don't find to display_size_default from mesonfb-dts
[    1.473810] init fbdev bpp is :24
[    1.481128] osd probe ok  
[    1.481193] hdmitx: video: get current mode: 800x600p60hz
[    1.485848] hdmitx: video: get current mode: 800x600p60hz
[    1.491404] hdmitx: system: gate/pwr cmd: 7
[    1.495744] hdmitx: system: already init VIC = 0  Now VIC = 76
[    1.501711] hdmitx: system:  76 (cd0,cs0,pm1,vd0,1) 
[    1.506790] hdmitx: system: gate/pwr cmd: 0
[    1.511129] hdmitx: system: hw reset
[    1.515871] hdmitx: audio: SPDIF
[    1.518268] reconfig packet setting done
[    1.542265] hdmitx: system: set pll
[    1.542331] hdmitx: system: param->VIC:76
[    1.544498] mode is: 17
[    1.547093] VPU_VIU_VENC_MUX_CTRL: 0xa
[    1.550989] viu chan = 1
[    1.553661] VPU_VIU_VENC_MUX_CTRL: 0xa
[    1.557584] config HPLL
[    1.577098] config HPLL done
[    1.577165] enc_vpu_bridge_reset[314]
[    1.717098] hdmitx: system: phy setting done
[    1.717178] hdmi: Fixing to HDMI Mode
[    1.719755] hdmi: Sink is HDMI device
[    1.723568] hdmi: No sink attached
[    1.727171] hdmitx: audio: audio channel num is 0
[    1.731985] hdmitx: audio: SPDIF
[    1.735345] hdmitx: audio: current VIC: 76
[    1.739605] hdmitx: audio: audio sample rate: 0
[    1.744269] hdmitx: audio: reset audio N para
[    1.748796] hdmitx: audio: PCM out to HDMI
[    1.765438] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[    1.765604] hdmitx: audio: i2s_to_spdif_flag:1 
[    1.770283] hdmitx: audio: Enable audio spdif to HDMI
[    1.813345] amlvideo-000: V4L2 device registered as video10
[    1.813765] ionvideo-000: V4L2 device registered as video13
[    1.819256] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
[    1.827698] DI: di_init
[    1.827808] aml_wdt_driver_init,306
[    1.831252] ** disable watchdog
[    1.834619] one-secod=7812,min_timeout=1,max_timeout=8,default_timeout=10,reset_watchdog_method=0,reset_watchdog_time=2,shutdown_timeout=10,firmware_timeout=6,suspend_timeout=6
[    1.850801] AML Watchdog Timer probed done 
[    1.855065] set uart_ao pinmux use pinctrl subsystem
[    1.859861] P_AO_RTI_PIN_MUX_REG:1801
[    1.863653] start uart_ao_ttyS0:(irq = 122)
[    1.867979] register uart_ao ok
[    1.871505] set uart_b pinmux use pinctrl subsystem
[    1.876285] P_AO_RTI_PIN_MUX_REG:1801
[    1.883096] start uart_b_ttyS2:(irq = 107)
[    1.887276] register uart_b ok
[    1.890516] dwc_otg: version 3.10a 12-MAY-2014
[    1.895086] dwc_otg lm-root: dwc_otg_driver_probe(ef339e00)
[    1.895097] dwc_otg_driver_probe NOT match
[    1.899340] dwc_otg lm1: dwc_otg_driver_probe(ef33a000)
[    1.939344] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
[    1.945376] USB (1) use clock source: XTAL input
[    1.951196] dwc_otg lm1: base=0xfe080000
[    1.951207] dwc_otg lm1: dwc_otg_device=0xeea49100
[    1.971335] Core Release: 3.10a
[    1.974412] Setting default values for core params
[    1.977515] curmode: 1, host_only: 1
[    1.980715] dwc_otg lm1: DMA config: BURST_DEFAULT
[    2.000881] Using Buffer DMA mode
[    2.003917] OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.006948] Working on port type = HOST
[    2.010443] dwc_otg lm1: DWC OTG Controller
[    2.014571] dwc_otg lm1: new USB bus registered, assigned bus number 1
[    2.021276] dwc_otg lm1: irq 63, io mem 0x00000000
[    2.026143] -------hcd->flags.d32 = 0
[    2.029999] Init: Port Power? op_state=1
[    2.034024] Init1: Power Port (0)
[    2.038101] hub 1-0:1.0: USB hub found
[    2.041432] hub 1-0:1.0: 1 port detected
[    2.045718] dwc_otg lm0: dwc_otg_driver_probe(ef33a200)
[    2.045753] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
[    2.054177] USB (0) use clock source: XTAL input
[    2.059917] dwc_otg lm0: base=0xfe040000
[    2.059928] dwc_otg lm0: dwc_otg_device=0xeea4ca40
[    2.080026] Core Release: 3.10a
[    2.083150] Setting default values for core params
[    2.086270] curmode: 1, host_only: 0
[    2.129410] dwc_otg lm0: DMA config: BURST_DEFAULT
[    2.149585] Using Buffer DMA mode
[    2.152640] OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.155685] Working on port type = OTG
[    2.158862] Current port type: SLAVE
[    2.162759] dwc_otg lm0: DWC OTG Controller
[    2.166884] dwc_otg lm0: new USB bus registered, assigned bus number 2
[    2.173583] dwc_otg lm0: irq 62, io mem 0x00000000
[    2.178931] hub 2-0:1.0: USB hub found
[    2.182350] hub 2-0:1.0: 1 port detected
[    2.186570] Dedicated Tx FIFOs mode
[    2.190374] using timer detect id change, eea6cc00
[    2.195142] ethernet_driver probe!
[    2.198571] ethernetinit(dbg[c09c4380]=1)
[    2.202697] ethernet base addr is fe0c0000
[    2.206936] write mac add to:eea8ac88: 00 1e 06 10 34 19 |..4|
[    2.217585] libphy: AMLMAC MII Bus: probed
[    2.220623] eth0: PHY ID 001cc916 at 0 IRQ -1 (0:00) active
[    2.224948] eth0: PHY ID 001cc916 at 1 IRQ -1 (0:01) active
[    2.230837] amvideocap_init_module
[    2.234303] amvideocap_probe,amvideocap
[    2.238230] amvideocap_dev_register buf:0da00000,size:a00000.
[    2.238274] Indeed it is in host mode hprt0 = 00021501
[    2.249666] Amlogic A/V streaming port init
[    2.255220] init vdec memsource 9a00000->d9fffff
[    2.258645] [tsync_pcr_init]init success. 
[    2.262805] regist mpeg12 codec profile
[    2.266787] regist mpeg4 codec profile
[    2.270643] amvdec_vc1 module init
[    2.274216] regist vc1 codec profile
[    2.277927] amvdec_h264 module init
[    2.281623] regist h264 codec profile
[    2.285345] amvdec_h265 module init
[    2.289030] regist hevc codec profile
[    2.292829] regist mjpeg codec profile
[    2.296684] amvdec_real module init
[    2.300390] regist real codec profile
[    2.304133] amvdec_avs module init
[    2.307891] regist avc codec profile
[    2.311407] jpegenc module init
[    2.314900] alloc_keep_buffer keep_y_addr ee600000
[    2.319747] alloc_keep_buffer keep_u_addr eec00000
[    2.324580] alloc_keep_buffer keep_v_addr eeb80000
[    2.329528] yaddr=ee600000,u_addr=eec00000,v_addr=eeb80000
[    2.335435] create_ge2d_work_queue video task ok 
[    2.340210] SARADC Driver init.
[    2.343342] __saradc_probe__
[    2.417143] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.421224] Indeed it is in host mode hprt0 = 00001101
[    2.487209] saradc calibration: ref_val = 506
[    2.490093] saradc calibration: ref_nominal = 512
[    2.493780] saradc calibration: coef = 4025
[    2.498398] ir irblaster probe
[    2.501516] Remote Driver
[    2.504437] ==touch_ts_init==
[    2.507355] ==ft5x0x_ts_init==
[    2.510383] ==goodix_ts_init==
[    2.513620] i2c-core: driver [gslx680_compatible] using legacy suspend method
[    2.520887] i2c-core: driver [gslx680_compatible] using legacy resume method
[    2.528086] !!!ntp_ts: ret = 0. 
[    2.531375] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
[    2.537834] i2c-core: driver [ct36x] using legacy suspend method
[    2.543918] i2c-core: driver [ct36x] using legacy resume method
[    2.550025] VTL ct36x TouchScreen driver End.
[    2.554459] ==gsl_ts_init==
[    2.557436] ret=0
[    2.560336] i2c-core: driver [mir3da] using legacy suspend method
[    2.565778] i2c-core: driver [mir3da] using legacy resume method
[    2.571947] i2c-core: driver [lis3dh_acc] using legacy suspend method
[    2.578471] i2c-core: driver [lis3dh_acc] using legacy resume method
[    2.585037] i2c-core: driver [bma222] using legacy suspend method
[    2.591179] i2c-core: driver [bma222] using legacy resume method
[    2.597420] i2c-core: driver [dmard06] using legacy suspend method
[    2.603627] i2c-core: driver [dmard06] using legacy resume method
[    2.609905] lsm303d driver: init
[    2.613275] i2c-core: driver [dmard10] using legacy suspend method
[    2.619232] hub 1-1:1.0: USB hub found
[    2.619564] hub 1-1:1.0: 4 ports detected
[    2.627566] i2c-core: driver [dmard10] using legacy resume method
[    2.633851] stk8313_init
[    2.636556] ======stk831x init ok======
[    2.640493] stk831x_init
[    2.643198] mxc622x accelerometer driver: init
[    2.647800] i2c-core: driver [mxc622x] using legacy suspend method
[    2.654110] i2c-core: driver [mxc622x] using legacy resume method
[    2.660344] mxc6255xc accelerometer driver: init
[    2.665114] i2c-core: driver [mxc6255xc] using legacy suspend method
[    2.671627] i2c-core: driver [mxc6255xc] using legacy resume method
[    2.678100] cm3217 v.1.0.0.1
[    2.681051] i2c-core: driver [elan_epl6814] using legacy suspend method
[    2.687851] i2c-core: driver [elan_epl6814] using legacy resume method
[    2.694512] i2c-core: driver [LTR501] using legacy suspend method
[    2.700730] i2c-core: driver [LTR501] using legacy resume method
[    2.706999] mmc driver version: 1.07, 2014-06-30: eMMC add hw reset function
[    2.715042] host->base fe108e00
[    2.717945] pdata->caps 107
[    2.720678] pdata->caps2 0
[    2.723371] get property:                     port, value:0x00000004
[    2.729654] get property:                ocr_avail, value:0x00200080
[    2.736108] get property:                    f_min, value:0x000493e0
[    2.742620] get property:                    f_max, value:0x05f5e100
[    2.749092] get property:             max_req_size, value:0x00020000
[    2.755547] get property:                   irq_in, value:0x00000003
[    2.762036] get property:                  irq_out, value:0x00000005
[    2.768518] get property:                  gpio_cd, str:CARD_6
[    2.774458] get property:                  pinname, str:sd
[    2.780083] get property:                card_type, value:0x00000005
[    2.786581] get property:                gpio_dat3, str:CARD_4
[    2.792566] get property:               gpio_volsw, str:GPIOAO_3
[    2.798896] aml_sd_voltage_switch[1309] : Switched to voltage -> 3.30 V
[    2.857131] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    2.897431] usb 1-1.1: new low-speed USB device number 3 using dwc_otg
[    2.917101] [aml_sdhc_probe] aml_sdhc_probe() success!
[    2.920555] host->base fe108c20
[    2.923352] pdata->caps 80000507
[    2.926155] pdata->caps2 1
[    2.929019] get property:                     port, value:0x00000002
[    2.935535] get property:                ocr_avail, value:0x00200000
[    2.942034] get property:                    f_min, value:0x000493e0
[    2.948524] get property:                    f_max, value:0x02faf080
[    2.954980] get property:                  f_max_w, value:0x02faf080
[    2.961490] get property:             max_req_size, value:0x00020000
[    2.968001] get property:                  pinname, str:emmc
[    2.973764] get property:                card_type, value:0x00000001
[    2.980269] get property:                gpio_dat3, str:BOOT_3
[    2.986214] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=1
[    3.004698] input: PixArt USB Optical Mouse as /devices/lm1/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[    3.011385] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-lm1-1.1/input0
[    3.061023] sd: new high speed SDHC card at address aaaa, clock 50000000, 4-bit-bus-width
[    3.066973] mmcblk0: sd:aaaa SL16G 14.8 GiB 
[    3.076731]  mmcblk0: p1 p2
[    3.080215] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    3.084282] aml_emmc_hw_reset 1379
[    3.087120] [aml_sdio_probe] aml_sdio_probe() success!
[    3.087247] [dsp]DSP start addr 0xc5e00000
[    3.087276] [dsp]register dsp to char divece(257)
[    3.103231] aml_rtc rtc.1: rtc core: registered aml_rtc as rtc0
[    3.109989] amlogic rfkill init
[    3.113103] Bluetooth: btwake_control_init Driver Ver 1.1
[    3.117562] aml_hw_crypto initialization.
[    3.122479] pcm5102_platform_probe
[    3.125805] enter aml_i2s_dai_probe
[    3.125815] i2s get no clk src setting in dts, use the default mpll 0
[    3.131642] enter aml_pcm_dai_probe
[    3.131856] enter spdif_dit_probe 
[    3.134995] aml_spdif_unmute 
[    3.139082] aml-i2s 0:playback preallocate_dma_buffer: area=f0516000, addr=3ec40000, size=65536
[    3.147459] aml-i2s 1:capture preallocate_dma_buffer: area=f0528000, addr=3ec60000, size=65536
[    3.155821] aml_snd_m8 aml_m8_sound_card.4:  dit-hifi <-> aml-spdif-dai.0 mapping ok
[    3.164885] GACT probability NOT on
[    3.168059] Mirror/redirect action on
[    3.171846] NET: Registered protocol family 10
[    3.176497] mip6: Mobile IPv6
[    3.179682] sit: IPv6 over IPv4 tunneling driver
[    3.184645] NET: Registered protocol family 17
[    3.188305] NET: Registered protocol family 15
[    3.192870] Bridge firewalling registered
[    3.197093] Bluetooth: RFCOMM TTY layer initialized
[    3.201979] Bluetooth: RFCOMM socket layer initialized
[    3.207259] Bluetooth: RFCOMM ver 1.11
[    3.211095] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.216544] Bluetooth: BNEP filters: protocol multicast
[    3.221939] Bluetooth: BNEP socket layer initialized
[    3.227023] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.233124] Bluetooth: HIDP socket layer initialized
[    3.238223] NET: Registered protocol family 35
[    3.243403] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
[    3.250635] Registering SWP/SWPB emulation handler
[    3.255892] pm-meson: probe of aml_pm_m8 failed with error -1
[    3.262088] registered taskstats version 1
[    3.265766] regulator-dummy: disabling
[    3.269829] Mali DRM initialize, driver name: mali_drm, version 2.1
[    3.276318] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
[    3.282231] Mali DRM initialize, driver name: mali_drm, version 2.1
[    3.288866] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
[    3.295352] aml_rtc rtc.1: setting system clock to 1991-09-01 15:15:26 UTC (683738126)
[    3.302888] ### dt-test ### No testcase data in device tree; not running tests
[    3.307428] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[    3.317051] meson_cpufreq_probe:SYSPLL request to be fixed
[    3.322595] meson_cpufreq: no voltage_control prop
[    3.327531] voltage_control = 0
[    3.331673] <<-GTP-INFO->> GTP driver installing...
[    3.335356] buf[0]=f1,buf[1]=af,err=4
[    3.338986] adc=383,TS_C=17,flag=1
[    3.342505] efuse_flag=a
[    3.345187] amlogic_thermal_probe, this chip is trimmed, use thermal
[    3.351754] amlogic-thermal aml_thermal: amlogic thermal probe start
[    3.358260] #thermal-cells=7
[    3.361266] pdata->temp_trip_count=4
[    3.364992] temperature=70 on trip point=0
[    3.369253] fixing high_freq=1488001 to 1488000 at trip point 0,level=3
[    3.375986] fixing low_freq=1488001 to 1488000 at trip point 0,level=3
[    3.382650] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
[    3.389095] cpu[0] core num==3
[    3.392256] gpu[0] core num==2
[    3.395434] temperature=80 on trip point=1
[    3.399702] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
[    3.406463] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
[    3.413143] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
[    3.416871] input: SEM USB Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.0/input/input1
[    3.417217] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-lm1-1.3/input0
[    3.420712] input: SEM USB Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.1/input/input2
[    3.420980] hid-generic 0003:1A2C:0E24.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-lm1-1.3/input1
[    3.458823] cpu[1] core num==2
[    3.462004] gpu[1] core num==2
[    3.465186] temperature=90 on trip point=2
[    3.469452] fixing high_freq=800001 to 696000 at trip point 2,level=11
[    3.476098] fixing low_freq=800001 to 696000 at trip point 2,level=11
[    3.482669] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
[    3.489069] cpu[2] core num==1
[    3.492194] gpu[2] core num==1
[    3.495354] temperature=110 on trip point=3
[    3.499701] fixing high_freq=-1 to -22 at trip point 3,level=-1
[    3.505733] fixing low_freq=-1 to -22 at trip point 3,level=-1
[    3.511712] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
[    3.517982] cpu[3] core num==-1
[    3.521241] gpu[3] core num==-1
[    3.524514] idle interval=1000
[    3.527710] pdata->name:aml_thermal
[    3.531585] tmp_trip[0].cpu_core_upper=1
[    3.535409] tmp_trip[1].cpu_core_upper=2
[    3.539468] tmp_trip[2].cpu_core_upper=3
[    3.543500] tmp_trip[3].cpu_core_upper=-1
[    3.547641] aml_thermal bind thermal-cpucore-0 okay !
[    3.552844] aml_thermal bind thermal-cpufreq-0 okay !
[    3.558012] pdata->tmp_trip[0].gpu_lower_level=1
[    3.562730] pdata->tmp_trip[0].gpu_upper_level=1
[    3.567481] pdata->tmp_trip[1].gpu_lower_level=2
[    3.572174] pdata->tmp_trip[1].gpu_upper_level=2
[    3.576903] pdata->tmp_trip[2].gpu_lower_level=4
[    3.581660] pdata->tmp_trip[2].gpu_upper_level=4
[    3.586401] pdata->tmp_trip[3].gpu_lower_level=-1
[    3.591238] pdata->tmp_trip[3].gpu_upper_level=-1
[    3.596066] aml_thermal bind thermal-gpufreq-0 okay !
[    3.601398] amlogic: Kernel Thermal management registered
[    3.606832] amlogic-thermal aml_thermal: amlogic thermal probe done
[    3.613324] hdmitx: cec: CEC init
[    3.616798] hdmitx: cec: CEC task process
[    3.616939] input: cec_input as /devices/virtual/input/input3
[    3.617140] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[    3.617140] ALSA device list:
[    3.617143]   #0: ODROID-HDMI
[    3.638912] config uart_ao_ttyS0:: Character length 8bits/char
[    3.657099] Changing uart_ao_ttyS0: baud from 0 to 115200
[    3.677297] Freeing unused kernel memory: 224K (c0939000 - c0971000)
[    3.730386] systemd-udevd[109]: starting version 215
[    4.114006] tvmode set to 800x600p60hz

[    4.120742] don't set the same mode as current.
[    4.146518] tvmode set to 800x600p60hz

[    4.150906] don't set the same mode as current.
[    5.995809] force enable DISCARD here for ext4 fs
[    6.057601] checked enable EXT4 DISCARD here
[    6.059756] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard
[    6.070371] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    6.354675] config uart_ao_ttyS0:: Character length 8bits/char
[    6.357017] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.369595] systemd[1]: Detected architecture 'arm'.
[    6.389588] config uart_ao_ttyS0:: Character length 8bits/char
[    6.461620] systemd[1]: Inserted module 'autofs4'
[    6.465228] systemd[1]: Set hostname to <gamestation-turbo>.
[    6.497687] config uart_ao_ttyS0:: Character length 8bits/char
[    6.847202] systemd[1]: Cannot add dependency job for unit c1-init.service, ignoring: Unit c1-init.service failed to load: No such file or directory.
[    6.862470] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.867424] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.874780] systemd[1]: Expecting device dev-ttyS0.device...
[    6.881007] config uart_ao_ttyS0:: Character length 8bits/char
[    6.897213] systemd[1]: Starting Remote File Systems (Pre).
[    6.899927] config uart_ao_ttyS0:: Character length 8bits/char
[    6.917167] systemd[1]: Reached target Remote File Systems (Pre).
[    6.920201] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.928561] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.936463] systemd[1]: Starting Paths.
[    6.940695] config uart_ao_ttyS0:: Character length 8bits/char
[    6.957176] systemd[1]: Reached target Paths.
[    6.959680] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.968019] config uart_ao_ttyS0:: Character length 8bits/char
[    6.987191] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.995869] systemd[1]: Starting Encrypted Volumes.
[    6.998809] config uart_ao_ttyS0:: Character length 8bits/char
[    7.017181] systemd[1]: Reached target Encrypted Volumes.
[    7.019570] systemd[1]: Starting Swap.
[    7.023549] config uart_ao_ttyS0:: Character length 8bits/char
[    7.037197] systemd[1]: Reached target Swap.
[    7.039576] systemd[1]: Expecting device dev-mmcblk0p1.device...
[    7.044723] config uart_ao_ttyS0:: Character length 8bits/char
[    7.057177] systemd[1]: Starting Root Slice.
[    7.059838] config uart_ao_ttyS0:: Character length 8bits/char
[    7.077179] systemd[1]: Created slice Root Slice.
[    7.079549] systemd[1]: Starting Delayed Shutdown Socket.
[    7.084647] config uart_ao_ttyS0:: Character length 8bits/char
[    7.097167] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.099746] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.106893] config uart_ao_ttyS0:: Character length 8bits/char
[    7.108144] emmc: mmc_rescan_try_freq: trying to init card at 300000 Hz
[    7.127188] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.131061] systemd[1]: Starting Journal Socket (/dev/log).
[    7.137187] config uart_ao_ttyS0:: Character length 8bits/char
[    7.147106] aml_emmc_hw_reset 1379
[    7.157191] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.160017] systemd[1]: Starting User and Session Slice.
[    7.165902] config uart_ao_ttyS0:: Character length 8bits/char
[    7.177179] systemd[1]: Created slice User and Session Slice.
[    7.179893] systemd[1]: Starting udev Control Socket.
[    7.185397] config uart_ao_ttyS0:: Character length 8bits/char
[    7.197168] systemd[1]: Listening on udev Control Socket.
[    7.199623] systemd[1]: Starting udev Kernel Socket.
[    7.204927] config uart_ao_ttyS0:: Character length 8bits/char
[    7.217174] systemd[1]: Listening on udev Kernel Socket.
[    7.219672] systemd[1]: Starting Journal Socket.
[    7.224600] config uart_ao_ttyS0:: Character length 8bits/char
[    7.237200] systemd[1]: Listening on Journal Socket.
[    7.239775] systemd[1]: Starting System Slice.
[    7.244120] config uart_ao_ttyS0:: Character length 8bits/char
[    7.257194] systemd[1]: Created slice System Slice.
[    7.259749] systemd[1]: Started File System Check on Root Device.
[    7.265323] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    7.271832] config uart_ao_ttyS0:: Character length 8bits/char
[    7.287168] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.290549] systemd[1]: Starting Increase datagram queue length...
[    7.297119] config uart_ao_ttyS0:: Character length 8bits/char
[    7.319095] systemd[1]: Starting udev Coldplug all Devices...
[    7.322283] config uart_ao_ttyS0:: Character length 8bits/char
[    7.339498] systemd[1]: Mounting Debug File System...
[    7.342535] config uart_ao_ttyS0:: Character length 8bits/char
[    7.378811] systemd[1]: Starting Load Kernel Modules...
[    7.381856] config uart_ao_ttyS0:: Character length 8bits/char
[    7.399252] systemd[1]: Mounting POSIX Message Queue File System...
[    7.403017] config uart_ao_ttyS0:: Character length 8bits/char
[    7.429000] systemd[1]: Started Set Up Additional Binary Formats.
[    7.432506] systemd[1]: Mounted Huge Pages File System.
[    7.438028] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.450032] config uart_ao_ttyS0:: Character length 8bits/char
[    7.463978] fuse init (API version 7.22)
[    7.489426] systemd[1]: Starting system-getty.slice.
[    7.492929] config uart_ao_ttyS0:: Character length 8bits/char
[    7.507234] systemd[1]: Created slice system-getty.slice.
[    7.509929] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.516360] config uart_ao_ttyS0:: Character length 8bits/char
[    7.527188] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.530689] systemd[1]: Starting LSB: Resize the root filesystem to fill partition...
[    7.538931] config uart_ao_ttyS0:: Character length 8bits/char
[    7.558842] systemd[1]: Starting Slices.
[    7.561929] config uart_ao_ttyS0:: Character length 8bits/char
[    7.577222] systemd[1]: Reached target Slices.
[    7.581784] config uart_ao_ttyS0:: Character length 8bits/char
[    7.597254] systemd[1]: Mounted POSIX Message Queue File System.
[    7.600906] config uart_ao_ttyS0:: Character length 8bits/char
[    7.617228] systemd[1]: Mounted Debug File System.
[    7.621212] config uart_ao_ttyS0:: Character length 8bits/char
[    7.637271] systemd[1]: Started Increase datagram queue length.
[    7.645242] config uart_ao_ttyS0:: Character length 8bits/char
[    7.657315] systemd[1]: Started Load Kernel Modules.
[    7.662026] config uart_ao_ttyS0:: Character length 8bits/char
[    7.677280] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.686823] systemd[1]: resize2fs_once.service: control process exited, code=exited status=1
[    7.693428] config uart_ao_ttyS0:: Character length 8bits/char
[    7.707508] config uart_ao_ttyS0:: Character length 8bits/char
[    7.727252] systemd[1]: Failed to start LSB: Resize the root filesystem to fill partition.
[    7.732795] systemd[1]: Unit resize2fs_once.service entered failed state.
[    7.740780] config uart_ao_ttyS0:: Character length 8bits/char
[    7.757250] systemd[1]: Started udev Coldplug all Devices.
[    7.848541] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.852528] config uart_ao_ttyS0:: Character length 8bits/char
[    7.869457] systemd[1]: Starting Apply Kernel Variables...
[    7.872522] config uart_ao_ttyS0:: Character length 8bits/char
[    7.889861] systemd[1]: Mounting Configuration File System...
[    7.893326] config uart_ao_ttyS0:: Character length 8bits/char
[    7.909337] systemd[1]: Mounting FUSE Control File System...
[    7.912736] config uart_ao_ttyS0:: Character length 8bits/char
[    7.929258] systemd[1]: Starting Syslog Socket.
[    7.932862] config uart_ao_ttyS0:: Character length 8bits/char
[    7.947228] systemd[1]: Listening on Syslog Socket.
[    7.949979] systemd[1]: Starting Journal Service...
[    7.954599] config uart_ao_ttyS0:: Character length 8bits/char
[    7.969585] config uart_ao_ttyS0:: Character length 8bits/char
[    7.987225] systemd[1]: Started Journal Service.
[    7.994471] config uart_ao_ttyS0:: Character length 8bits/char
[    8.007675] config uart_ao_ttyS0:: Character length 8bits/char
[    8.028631] config uart_ao_ttyS0:: Character length 8bits/char
[    8.048487] config uart_ao_ttyS0:: Character length 8bits/char
[    8.111278] config uart_ao_ttyS0:: Character length 8bits/char
[    8.163141] systemd-udevd[212]: starting version 215
[    8.165962] config uart_ao_ttyS0:: Character length 8bits/char
[    8.177959] config uart_ao_ttyS0:: Character length 8bits/char
[    8.201532] config uart_ao_ttyS0:: Character length 8bits/char
[    8.221463] config uart_ao_ttyS0:: Character length 8bits/char
[    8.242090] config uart_ao_ttyS0:: Character length 8bits/char
[    8.324970] config uart_ao_ttyS0:: Character length 8bits/char
[    8.588876] config uart_ao_ttyS0:: Character length 8bits/char
[    8.652481] config uart_ao_ttyS0:: Character length 8bits/char
[    8.680037] Driver for 1-wire Dallas network protocol.
[    8.680283] config uart_ao_ttyS0:: Character length 8bits/char
[    8.683439] aml_gpio_probe : success
[    8.700274] config uart_ao_ttyS0:: Character length 8bits/char
[    8.762621] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    8.773634] config uart_ao_ttyS0:: Character length 8bits/char
[    8.807540] config uart_ao_ttyS0:: Character length 8bits/char
[    8.831733] config uart_ao_ttyS0:: Character length 8bits/char
[    8.903733] config uart_ao_ttyS0:: Character length 8bits/char
[    9.226443] ionvideo open
[    9.229456] ionvideo_stop_generating!!!!
[    9.232040] ionvideo release
[    9.434349] config uart_ao_ttyS0:: Character length 8bits/char
[    9.449797] config uart_ao_ttyS0:: Character length 8bits/char
[    9.487873] config uart_ao_ttyS0:: Character length 8bits/char
[    9.589234] config uart_ao_ttyS0:: Character length 8bits/char
[    9.621111] config uart_ao_ttyS0:: Character length 8bits/char
[    9.673481] config uart_ao_ttyS0:: Character length 8bits/char
[    9.700706] config uart_ao_ttyS0:: Character length 8bits/char
[    9.719633] config uart_ao_ttyS0:: Character length 8bits/char
[    9.740937] config uart_ao_ttyS0:: Character length 8bits/char
[    9.761157] config uart_ao_ttyS0:: Character length 8bits/char
[    9.777758] config uart_ao_ttyS0:: Character length 8bits/char
[    9.800144] config uart_ao_ttyS0:: Character length 8bits/char
[    9.820656] config uart_ao_ttyS0:: Character length 8bits/char
[    9.844394] config uart_ao_ttyS0:: Character length 8bits/char
[    9.890001] config uart_ao_ttyS0:: Character length 8bits/char
[    9.927341] systemd-journald[211]: Received request to flush runtime journal from PID 1
[    9.933037] config uart_ao_ttyS0:: Character length 8bits/char
[    9.991587] config uart_ao_ttyS0:: Character length 8bits/char
[   10.014119] config uart_ao_ttyS0:: Character length 8bits/char
[   10.086409] config uart_ao_ttyS0:: Character length 8bits/char
[   10.103296] config uart_ao_ttyS0:: Character length 8bits/char
[   10.117909] config uart_ao_ttyS0:: Character length 8bits/char
[   10.314702] config uart_ao_ttyS0:: Character length 8bits/char
[   10.333110] config uart_ao_ttyS0:: Character length 8bits/char
[   10.349823] config uart_ao_ttyS0:: Character length 8bits/char
[   10.369736] config uart_ao_ttyS0:: Character length 8bits/char
[   10.387663] config uart_ao_ttyS0:: Character length 8bits/char
[   10.411350] config uart_ao_ttyS0:: Character length 8bits/char
[   10.427792] config uart_ao_ttyS0:: Character length 8bits/char
[   10.449639] config uart_ao_ttyS0:: Character length 8bits/char
[   10.469999] config uart_ao_ttyS0:: Character length 8bits/char
[   10.487891] config uart_ao_ttyS0:: Character length 8bits/char
[   10.509608] config uart_ao_ttyS0:: Character length 8bits/char
[   10.530199] config uart_ao_ttyS0:: Character length 8bits/char
[   10.627566] config uart_ao_ttyS0:: Character length 8bits/char
[   11.383564] config uart_ao_ttyS0:: Character length 8bits/char
[   11.400623] config uart_ao_ttyS0:: Character length 8bits/char
[   11.420262] config uart_ao_ttyS0:: Character length 8bits/char
[   11.441696] config uart_ao_ttyS0:: Character length 8bits/char
[   11.460376] config uart_ao_ttyS0:: Character length 8bits/char
[   11.480542] config uart_ao_ttyS0:: Character length 8bits/char
[   11.500044] config uart_ao_ttyS0:: Character length 8bits/char
[   11.532207] config uart_ao_ttyS0:: Character length 8bits/char
[   11.552402] config uart_ao_ttyS0:: Character length 8bits/char
[   11.568909] config uart_ao_ttyS0:: Character length 8bits/char
[   11.588956] config uart_ao_ttyS0:: Character length 8bits/char
[   11.610469] config uart_ao_ttyS0:: Character length 8bits/char
[   11.628925] config uart_ao_ttyS0:: Character length 8bits/char
[   11.649002] config uart_ao_ttyS0:: Character length 8bits/char
[   11.668729] config uart_ao_ttyS0:: Character length 8bits/char
[   11.689303] config uart_ao_ttyS0:: Character length 8bits/char
[   11.812246] config uart_ao_ttyS0:: Character length 8bits/char
[   11.840853] config uart_ao_ttyS0:: Character length 8bits/char
[   11.860958] config uart_ao_ttyS0:: Character length 8bits/char
[   11.879250] config uart_ao_ttyS0:: Character length 8bits/char
[   11.899743] config uart_ao_ttyS0:: Character length 8bits/char
[   11.921159] config uart_ao_ttyS0:: Character length 8bits/char
[   11.939872] config uart_ao_ttyS0:: Character length 8bits/char
[   11.960502] config uart_ao_ttyS0:: Character length 8bits/char
[   11.980287] config uart_ao_ttyS0:: Character length 8bits/char
[   11.998471] config uart_ao_ttyS0:: Character length 8bits/char
[   12.021066] config uart_ao_ttyS0:: Character length 8bits/char
[   12.038415] config uart_ao_ttyS0:: Character length 8bits/char
[   12.075499] config uart_ao_ttyS0:: Character length 8bits/char
[   12.106097] config uart_ao_ttyS0:: Character length 8bits/char
[   12.137326] config uart_ao_ttyS0:: Character length 8bits/char
[   12.193628] config uart_ao_ttyS0:: Character length 8bits/char
[   12.223666] config uart_ao_ttyS0:: Character length 8bits/char
[   12.233101] netdev_open
[   12.235470] Ethernet reset
[   12.237861] NET MDA descpter start addr=edb00000
[   12.297298] phy_interface = 0
[   12.299963] aml_phy_init:  trying to attach to 0:01
[   12.302554] am_rtl811f called phy reset
[    9.223394] amlvideo openamlvideo close
[   12.317257] --1--write mac add to:
[   12.319733] eea8ac88: 00 1e 06 10 34 19 |..4|
[   12.322990] --2--write mac add to:eea8ac88: 00 1e 06 10 34 19 |..4|
[   12.331126] write mac add to:eea8ac88: 00 1e 06 10 34 19 |..4|
[   12.336092] Current DMA mode=0, set mode=621c100
[   12.341366] eth0: opened (irq 40).
[   12.351376] ether leave promiscuous mode
[   12.353671] ether leave all muticast mode
[   12.356510] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.381513] config uart_ao_ttyS0:: Character length 8bits/char
[   12.402339] config uart_ao_ttyS0:: Character length 8bits/char
[   12.912987] config uart_ao_ttyS0:: Character length 8bits/char
[   13.188258] create_disp_get_ump_secure_id******0
[   13.189199] create_disp_get_ump_secure_id******1
[   14.088866] config uart_ao_ttyS0:: Character length 8bits/char
[   14.117635] config uart_ao_ttyS0:: Character length 8bits/char
[   14.424791] config uart_ao_ttyS0:: Character length 8bits/char
[   14.442567] config uart_ao_ttyS0:: Character length 8bits/char
[   14.570438] config uart_ao_ttyS0:: Character length 8bits/char
[   14.803329] config uart_ao_ttyS0:: Character length 8bits/char
[   14.933240] config uart_ao_ttyS0:: Character length 8bits/char
[   14.948779] config uart_ao_ttyS0:: Character length 8bits/char
[   16.125452] config uart_ao_ttyS0:: Character length 8bits/char
[   16.148995] config uart_ao_ttyS0:: Character length 8bits/char
[   16.167829] config uart_ao_ttyS0:: Character length 8bits/char
[   16.189964] config uart_ao_ttyS0:: Character length 8bits/char
[   16.207757] config uart_ao_ttyS0:: Character length 8bits/char
[   16.233297] config uart_ao_ttyS0:: Character length 8bits/char
[   16.247460] config uart_ao_ttyS0:: Character length 8bits/char
[   16.285630] config uart_ao_ttyS0:: Character length 8bits/char
[   16.309463] config uart_ao_ttyS0:: Character length 8bits/char
[   16.309779] config uart_ao_ttyS0:: Character length 8bits/char
[   16.317717] [adjust link] -> eth: full-duplex
[   16.317758] [adjust link] -> eth: phy_speed <> priv_speed)
[   16.322276] [adjust link -> eth: am_adjust_link state change (new_state=true)
[   16.329565] libphy: 0:01 - Link is Up - 1000/Full
[   16.335619] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.356114] config uart_ao_ttyS0:: Character length 8bits/char
[   16.357527] config uart_ao_ttyS0:: Character length 8bits/char
[   24.820486] runtime dma_bytes 65536,stream type 0 
[   24.820642] ----aml_hw_iec958_init,runtime->rate=44100--
[   24.825315] audio_set_958_clk, freq=5,
[   24.829431] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   24.835923] iec958 mode PCM16
[   24.839189] IEC958 16bit
[   24.841731] hdmitx: audio: aout notify rate 44100
[   24.846965] hdmitx: audio: aout notify size 16
[   24.851384] hdmitx: audio: aout notify format CT_PCM
[   24.856314] hdmitx: audio: audio channel num is 1
[   24.861524] hdmitx: audio: SPDIF
[   24.864585] hdmitx: audio: current VIC: 76
[   24.868974] hdmitx: audio: audio sample rate: 2
[   24.873507] hdmitx: audio: reset audio N para
[   24.878191] hdmitx: audio: PCM out to HDMI
[   24.893821] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   24.893957] hdmitx: audio: i2s_to_spdif_flag:1 
[   24.898851] hdmitx: audio: Enable audio spdif to HDMI
[   24.903865] hdmitx: audio: Audio Type: PCM
[   24.908315] hdmitx: audio: set audio param
[   24.912649] ----aml_hw_iec958_init,runtime->rate=44100--
[   24.918022] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   24.924536] iec958 mode PCM16
[   24.927807] IEC958 16bit
[   24.930356] hdmitx: audio: aout notify rate 44100
[   24.935221] hdmitx: audio: aout notify size 16
[   24.939998] hdmitx: audio: audio channel num is 1
[   24.944681] hdmitx: audio: SPDIF
[   24.948255] hdmitx: audio: current VIC: 76
[   24.952319] hdmitx: audio: audio sample rate: 2
[   24.957141] hdmitx: audio: reset audio N para
[   24.961518] hdmitx: audio: PCM out to HDMI
[   24.977278] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   24.977393] hdmitx: audio: i2s_to_spdif_flag:1 
[   24.982118] hdmitx: audio: Enable audio spdif to HDMI
[   24.987478] hdmitx: audio: Audio Type: PCM
[   24.991609] hdmitx: audio: set audio param
[   25.142225] runtime dma_bytes 65536,stream type 1 
[   26.187005] alsa capture long time no data, quit xrun!
[   27.207008] alsa capture long time no data, quit xrun!
[   28.226998] alsa capture long time no data, quit xrun!
[   29.246983] alsa capture long time no data, quit xrun!
[   50.137081] runtime dma_bytes 65536,stream type 1 
[   50.173540] runtime dma_bytes 65536,stream type 1 
[   50.176390] runtime dma_bytes 65536,stream type 1 
[   50.179596] runtime dma_bytes 65536,stream type 0 
[   50.182788] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.188302] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.194931] iec958 mode PCM16
[   50.198086] IEC958 16bit
[   50.200746] hdmitx: audio: aout notify rate 44100
[   50.205605] hdmitx: audio: aout notify size 16
[   50.210250] hdmitx: audio: audio channel num is 0
[   50.215075] hdmitx: audio: SPDIF
[   50.218492] hdmitx: audio: current VIC: 76
[   50.222717] hdmitx: audio: audio sample rate: 2
[   50.227428] hdmitx: audio: reset audio N para
[   50.231925] hdmitx: audio: PCM out to HDMI
[   50.247379] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.247484] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.252172] hdmitx: audio: Enable audio spdif to HDMI
[   50.257518] hdmitx: audio: Audio Type: PCM
[   50.261678] hdmitx: audio: set audio param
[   50.265989] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.271397] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.278081] iec958 mode PCM16
[   50.281180] IEC958 16bit
[   50.283871] hdmitx: audio: aout notify rate 44100
[   50.288753] hdmitx: audio: aout notify size 16
[   50.293337] hdmitx: audio: audio channel num is 0
[   50.298245] hdmitx: audio: SPDIF
[   50.301593] hdmitx: audio: current VIC: 76
[   50.305839] hdmitx: audio: audio sample rate: 2
[   50.310553] hdmitx: audio: reset audio N para
[   50.315052] hdmitx: audio: PCM out to HDMI
[   50.330536] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.330641] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.335329] hdmitx: audio: Enable audio spdif to HDMI
[   50.340562] hdmitx: audio: Audio Type: PCM
[   50.344837] hdmitx: audio: set audio param
[   50.364868] runtime dma_bytes 65536,stream type 1 
[   50.366267] runtime dma_bytes 65536,stream type 1 
[   50.370792] runtime dma_bytes 65536,stream type 1 
[   50.375479] runtime dma_bytes 65536,stream type 0 
[   50.379103] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.384517] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.391232] iec958 mode PCM16
[   50.394330] IEC958 16bit
[   50.397056] hdmitx: audio: aout notify rate 44100
[   50.401887] hdmitx: audio: aout notify size 16
[   50.406485] hdmitx: audio: audio channel num is 1
[   50.411403] hdmitx: audio: SPDIF
[   50.414742] hdmitx: audio: current VIC: 76
[   50.419015] hdmitx: audio: audio sample rate: 2
[   50.423678] hdmitx: audio: reset audio N para
[   50.428222] hdmitx: audio: PCM out to HDMI
[   50.443632] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.443737] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.448458] hdmitx: audio: Enable audio spdif to HDMI
[   50.453641] hdmitx: audio: Audio Type: PCM
[   50.457953] hdmitx: audio: set audio param
[   50.462248] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.467651] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.474307] iec958 mode PCM16
[   50.477457] IEC958 16bit
[   50.480126] hdmitx: audio: aout notify rate 44100
[   50.484985] hdmitx: audio: aout notify size 16
[   50.489613] hdmitx: audio: audio channel num is 1
[   50.494455] hdmitx: audio: SPDIF
[   50.497863] hdmitx: audio: current VIC: 76
[   50.502093] hdmitx: audio: audio sample rate: 2
[   50.506781] hdmitx: audio: reset audio N para
[   50.511326] hdmitx: audio: PCM out to HDMI
[   50.526761] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.526898] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.531557] hdmitx: audio: Enable audio spdif to HDMI
[   50.536769] hdmitx: audio: Audio Type: PCM
[   50.541080] hdmitx: audio: set audio param
[   50.546554] runtime dma_bytes 65536,stream type 1 
[   50.551720] runtime dma_bytes 65536,stream type 1 
[   50.556418] runtime dma_bytes 65536,stream type 1 
[   50.570054] runtime dma_bytes 65536,stream type 0 
[   50.570109] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.574853] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.581580] iec958 mode PCM16
[   50.584670] IEC958 16bit
[   50.587387] hdmitx: audio: aout notify rate 44100
[   50.592225] hdmitx: audio: aout notify size 16
[   50.597019] hdmitx: audio: audio channel num is 1
[   50.601690] hdmitx: audio: SPDIF
[   50.605078] hdmitx: audio: current VIC: 76
[   50.609356] hdmitx: audio: audio sample rate: 2
[   50.614017] hdmitx: audio: reset audio N para
[   50.618558] hdmitx: audio: PCM out to HDMI
[   50.633992] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.634097] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.638815] hdmitx: audio: Enable audio spdif to HDMI
[   50.644000] hdmitx: audio: Audio Type: PCM
[   50.648315] hdmitx: audio: set audio param
[   50.652613] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.658989] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.664901] iec958 mode PCM16
[   50.667859] IEC958 16bit
[   50.670496] hdmitx: audio: aout notify rate 44100
[   50.675355] hdmitx: audio: aout notify size 16
[   50.680004] hdmitx: audio: audio channel num is 1
[   50.684817] hdmitx: audio: SPDIF
[   50.688247] hdmitx: audio: current VIC: 76
[   50.692454] hdmitx: audio: audio sample rate: 2
[   50.697170] hdmitx: audio: reset audio N para
[   50.701665] hdmitx: audio: PCM out to HDMI
[   50.717120] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.717229] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.721916] hdmitx: audio: Enable audio spdif to HDMI
[   50.727157] hdmitx: audio: Audio Type: PCM
[   50.731423] hdmitx: audio: set audio param
[   50.757208] runtime dma_bytes 65536,stream type 1 
[   51.806841] alsa capture long time no data, quit xrun!
[   52.826826] alsa capture long time no data, quit xrun!
[   53.846823] alsa capture long time no data, quit xrun!
[   54.866814] alsa capture long time no data, quit xrun!

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Wed Feb 10, 2016 12:27 am

now the same with receiver plugged but the keyboard is switch off
if I power the keyboard, it's crashing...

Code: Select all

lsmod
Module                  Size  Used by
hid_logitech_dj        10643  0 
nls_cp437               5134  1 
w1_gpio                 3178  0 
aml_gpio                7315  0 
wire                   20485  1 w1_gpio
snd_seq_midi            4673  0 
snd_seq_midi_event      5811  1 snd_seq_midi
snd_seq                50416  2 snd_seq_midi_event,snd_seq_midi
snd_rawmidi            19275  1 snd_seq_midi
snd_seq_device          5902  3 snd_seq,snd_rawmidi,snd_seq_midi
fuse                   72461  3 
autofs4                22325  2 
odroid@gamestation-turbo:~$ lsusb
Bus 001 Device 004: ID 1a2c:0e24 China Resource Semico Co., Ltd 
Bus 001 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
odroid@gamestation-turbo:~$ dmesg
[    0.000000] Booting Linux on physical CPU 0x200
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.80 (root@odroid-wheezy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP PREEMPT Wed Jan 20 16:18:02 CET 2016
[    0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: ODROIDC, model: AMLOGIC
[    0.000000] physical memory start address is 0x200000
[    0.000000] reserved_end is e3fffff 
 
[    0.000000] Total memory is 1022 MiB
[    0.000000] Reserved low memory from 0x06000000 to 0x0e3fffff, size: 132 MiB 
[    0.000000] 	mesonfb0(low)   	: 0x06100000 - 0x07900000 ( 24 MiB)
[    0.000000] 	mesonfb1(low)   	: 0x07900000 - 0x07a00000 (  1 MiB)
[    0.000000] 	mesonstream0(low)   	: 0x07a00000 - 0x09a00000 ( 32 MiB)
[    0.000000] 	vdec0(low)   	: 0x09a00000 - 0x0da00000 ( 64 MiB)
[    0.000000] 	ppmgr0(high)   	: 0x3f000000 - 0x40000000 ( 16 MiB)
[    0.000000] 	amvideocap0(low)   	: 0x0da00000 - 0x0e400000 ( 10 MiB)
[    0.000000] cma: CMA: reserved 8 MiB at 3e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 220160
[    0.000000] free_area_init_node: node 0, pgdat c09e8e40, node_mem_map c0cef000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 157184 pages, LIFO batch:31
[    0.000000]   HighMem zone: 492 pages used for memmap
[    0.000000]   HighMem zone: 62976 pages, LIFO batch:15
[    0.000000] Meson chip version = RevA (1B:A - 0:B72)
[    0.000000] PERCPU: Embedded 8 pages/cpu @c14d8000 s8384 r8192 d16192 u32768
[    0.000000] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 218640
[    0.000000] Kernel command line: root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro console=tty0 console=ttyS0,115200n8 no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=800x600p60hz m_bpp=32 vout=hdmi disableuhs disablehpd=true
[    0.000000] cvbs trimming line = 0xa000
[    0.000000] cvbs trimming.1.v5: 0xa0, 0x0
[    0.000000] osd1:1
[    0.000000] loaded:268435459
[    0.000000] logo has been loaded
[    0.000000] 720p:11
[    0.000000] full:2
[    0.000000] kernel get cvbsmode form uboot is 576cvbs
[    0.000000] kernel get hdmimode form uboot is 800x600p60hz
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 2060288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 64MB 16MB 780MB = 860MB total
[    0.000000] Memory: 845668k/845668k available, 34972k reserved, 243712K highmem
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc093830c   (9409 kB)
      .init : 0xc0939000 - 0xc09710c0   ( 225 kB)
      .data : 0xc0972000 - 0xc09e9d80   ( 480 kB)
       .bss : 0xc09e9d80 - 0xc0cea574   (3074 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Global timer: MESON TIMER-F (c098d100) initialized
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] meson_serial_console_setup
[    0.000000] console [ttyS0] enabled
[    0.347262] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.357534] pid_max: default: 32768 minimum: 301
[    0.362526] Security Framework initialized
[    0.366570] AppArmor: AppArmor initialized
[    0.370902] Mount-cache hash table entries: 512
[    0.380915] Initializing cgroup subsys memory
[    0.381019] Initializing cgroup subsys devices
[    0.384552] Initializing cgroup subsys freezer
[    0.389135] Initializing cgroup subsys blkio
[    0.393609] Initializing cgroup subsys perf_event
[    0.398552] CPU: Testing write buffer coherency: ok
[    0.403885] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
[    0.409317] Setting up static identity map for 0xc0683d68 - 0xc0683dc0
[    0.416074] L310 cache controller enabled
[    0.420103] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9,  Cache size: 524288 B
[    0.427499]       AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL  0x00000000
[    0.435649]       TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
[    0.520326] CPU1: Booted secondary processor
[    0.520345] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
[    0.540327] CPU2: Booted secondary processor
[    0.540345] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
[    0.560323] CPU3: Booted secondary processor
[    0.560342] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
[    0.560438] Brought up 4 CPUs
[    0.588627] SMP: Total of 4 processors activated (8.00 BogoMIPS).
[    0.594858] CPU: All CPU(s) started in SVC mode.
[    0.600405] devtmpfs: initialized
[    0.609971] clkrate [ xtal 	] : 24000000
[    0.610045] clkrate [ pll_sys 	] : 1200000000
[    0.612950] clkrate [ pll_fixed 	] : 2550000000
[    0.617624] clkrate [ pll_vid 	] : 732000000
[    0.622053] clkrate [ pll_ddr 	] : 0
[    0.625763] clkrate [ a9_clk 	] : 1200000000
[    0.630193] clkrate [ clk81 	] : 159375000
[    0.634880] pinctrl core: initialized pinctrl subsystem
[    0.640069] regulator-dummy: no parameters
[    0.644520] NET: Registered protocol family 16
[    0.653067] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.656945] VPU driver version: v02
[    0.659360] load vpu_clk in dts: 182150000Hz(3)
[    0.664090] vpu_probe OK
[    0.669027] amlogic_gpio gpio: Probed amlogic GPIO driver
[    0.672774] register lm device lm-root
[    0.676208] register lm device lm1
[    0.679749] register lm device lm0
[    0.683346] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.691422] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.697479] Init pinux probe!
[    0.701179] pinmux-m8b pinmux: Probed amlogic pinctrl driver
[    0.706327] tv_init_module
[    0.709152] major number 254 for disp
[    0.712974] vout_register_server
[    0.716332] register tv module server ok
[    0.720476] hdmitx: system: amhdmitx_init
[    0.724560] hdmitx: system: Ver: 2014May6
[    0.728781] hdmitx: system: amhdmitx_probe
[    0.733301] hdmitx: system: gate/pwr cmd: 7
[    0.737290] hdmitx: system: ALREADY init VIC = 4
[    0.742069] hdmitx: system: gate/pwr cmd: 0
[    0.746818] hdmitx: system: reset intr mask
[    0.770386] hdmitx: system: irq 1
[    0.780113] bio: create slab <bio-0> at 0
[    0.780868] SCSI subsystem initialized
[    0.782752] usbcore: registered new interface driver usbfs
[    0.788243] usbcore: registered new interface driver hub
[    0.793766] usbcore: registered new device driver usb
[    0.798931] media: Linux media interface: v0.10
[    0.803585] Linux video capture interface: v2.00
[    0.808738] switch_vpu_mem_pd: unsupport vpu mod
[    0.813068] unsupport vmod
[    0.815911] TV mode 800x600p60hz selected.
[    0.820163] tvoutc_setmode[459]
[    0.823444] aml_logo: outputmode changed(11->17), reset osd1 scaler.
[    0.850376] Advanced Linux Sound Architecture Driver Initialized.
[    0.851490] Bluetooth: Core ver 2.16
[    0.854774] NET: Registered protocol family 31
[    0.859333] Bluetooth: HCI device and connection manager initialized
[    0.865857] Bluetooth: HCI socket layer initialized
[    0.870869] Bluetooth: L2CAP socket layer initialized
[    0.876065] Bluetooth: SCO socket layer initialized
[    0.881249] Loading modules backported from Linux version next-20150129-0-g828f79f
[    0.888781] Backport integrated by backports.git backports-20150129-0-gdd4a670
[    0.896404] cfg80211: Calling CRDA to update world regulatory domain
[    0.903375] Switching to clocksource Timer-E
[    0.907408] AppArmor: AppArmor Filesystem Enabled
[    0.920740] NET: Registered protocol family 2
[    0.921507] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.926956] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.933554] TCP: Hash tables configured (established 8192 bind 8192)
[    0.939992] TCP: reno registered
[    0.943296] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.949400] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.956068] NET: Registered protocol family 1
[    0.960569] Unpacking initramfs...
[    1.106462] Freeing initrd memory: 2444K (c4e08000 - c506b000)
[    1.107605] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 3 counters available
[    1.115729] audit: initializing netlink socket (disabled)
[    1.120682] type=2000 audit(1.020:1): initialized
[    1.126243] bounce pool size: 64 pages
[    1.134570] VFS: Disk quotas dquot_6.5.2
[    1.134844] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.142147] aufs 3.10.x
[    1.142705] msgmni has been set to 1180
[    1.148178] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.154227] io scheduler noop registered
[    1.158332] io scheduler deadline registered
[    1.162834] io scheduler cfq registered (default)
[    1.220728] [drm] Initialized drm 1.1.0 20060810
[    1.220946] gpu cooling register okay with err=0
[    1.227526] Mali: Mali device driver loaded
[    1.229151] UMP: UMP device driver -v3.10.59-4500-ga164240 loaded
[    1.238623] loop: module loaded
[    1.239216] tun: Universal TUN/TAP device driver, 1.6
[    1.243719] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.250209] PPP generic driver version 2.4.2
[    1.254809] usbcore: registered new interface driver usb-storage
[    1.260730] usbcore: registered new interface driver usbserial
[    1.266607] usbcore: registered new interface driver usbserial_generic
[    1.273289] usbserial: USB Serial support registered for generic
[    1.279684] mousedev: PS/2 mouse device common for all mice
[    1.285363] i2c /dev entries driver
[    1.289102] device-mapper: uevent: version 1.0.3
[    1.293785] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.302232] Bluetooth: HCI UART driver ver 2.2
[    1.306664] Bluetooth: HCI H4 protocol initialized
[    1.311613] Bluetooth: HCI BCSP protocol initialized
[    1.316707] Bluetooth: HCILL protocol initialized
[    1.321570] Bluetooth: HCIATH3K protocol initialized
[    1.326664] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[    1.333742] ledtrig-cpu: registered to indicate activity on CPUs
[    1.339388] hidraw: raw HID events driver (C) Jiri Kosina
[    1.345106] usbcore: registered new interface driver usbhid
[    1.350586] usbhid: USB HID core driver
[    1.354778] efuse===========================================
[    1.360533] efuse: device efuse created
[    1.364373] efuse--------------------------------------------
[    1.370240] vout_init_module
[    1.373276] start init vout module 
[    1.377008] create  vout attribute ok 
[    1.381051] ge2d_init
[    1.383382] ge2d_dev major:244
[    1.386824] ge2d start monitor
[    1.390064] osd_init
[    1.390077] ge2d workqueue monitor start
[    1.396496] osd_probe, vinfo:c06c5ad8
[    1.400590] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
[    1.408438] osd_probe, mydef_var:c09bf5ec, vinfo:c06c5ad8
[    1.413948] init fbdev bpp is :32
[    1.417508] ---------------clear framebuffer0 memory  
[    1.443048] Console: switching to colour frame buffer device 160x90
[    1.454274] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
[    1.462250] osd_probe, mydef_var:c09bf5ec, vinfo:c06c5ad8
[    1.467758] don't find to display_size_default from mesonfb-dts
[    1.473810] init fbdev bpp is :24
[    1.481128] osd probe ok  
[    1.481193] hdmitx: video: get current mode: 800x600p60hz
[    1.485848] hdmitx: video: get current mode: 800x600p60hz
[    1.491404] hdmitx: system: gate/pwr cmd: 7
[    1.495744] hdmitx: system: already init VIC = 0  Now VIC = 76
[    1.501711] hdmitx: system:  76 (cd0,cs0,pm1,vd0,1) 
[    1.506790] hdmitx: system: gate/pwr cmd: 0
[    1.511129] hdmitx: system: hw reset
[    1.515871] hdmitx: audio: SPDIF
[    1.518268] reconfig packet setting done
[    1.542265] hdmitx: system: set pll
[    1.542331] hdmitx: system: param->VIC:76
[    1.544498] mode is: 17
[    1.547093] VPU_VIU_VENC_MUX_CTRL: 0xa
[    1.550989] viu chan = 1
[    1.553661] VPU_VIU_VENC_MUX_CTRL: 0xa
[    1.557584] config HPLL
[    1.577098] config HPLL done
[    1.577165] enc_vpu_bridge_reset[314]
[    1.717098] hdmitx: system: phy setting done
[    1.717178] hdmi: Fixing to HDMI Mode
[    1.719755] hdmi: Sink is HDMI device
[    1.723568] hdmi: No sink attached
[    1.727171] hdmitx: audio: audio channel num is 0
[    1.731985] hdmitx: audio: SPDIF
[    1.735345] hdmitx: audio: current VIC: 76
[    1.739605] hdmitx: audio: audio sample rate: 0
[    1.744269] hdmitx: audio: reset audio N para
[    1.748796] hdmitx: audio: PCM out to HDMI
[    1.765438] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[    1.765604] hdmitx: audio: i2s_to_spdif_flag:1 
[    1.770283] hdmitx: audio: Enable audio spdif to HDMI
[    1.813345] amlvideo-000: V4L2 device registered as video10
[    1.813765] ionvideo-000: V4L2 device registered as video13
[    1.819256] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
[    1.827698] DI: di_init
[    1.827808] aml_wdt_driver_init,306
[    1.831252] ** disable watchdog
[    1.834619] one-secod=7812,min_timeout=1,max_timeout=8,default_timeout=10,reset_watchdog_method=0,reset_watchdog_time=2,shutdown_timeout=10,firmware_timeout=6,suspend_timeout=6
[    1.850801] AML Watchdog Timer probed done 
[    1.855065] set uart_ao pinmux use pinctrl subsystem
[    1.859861] P_AO_RTI_PIN_MUX_REG:1801
[    1.863653] start uart_ao_ttyS0:(irq = 122)
[    1.867979] register uart_ao ok
[    1.871505] set uart_b pinmux use pinctrl subsystem
[    1.876285] P_AO_RTI_PIN_MUX_REG:1801
[    1.883096] start uart_b_ttyS2:(irq = 107)
[    1.887276] register uart_b ok
[    1.890516] dwc_otg: version 3.10a 12-MAY-2014
[    1.895086] dwc_otg lm-root: dwc_otg_driver_probe(ef339e00)
[    1.895097] dwc_otg_driver_probe NOT match
[    1.899340] dwc_otg lm1: dwc_otg_driver_probe(ef33a000)
[    1.939344] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
[    1.945376] USB (1) use clock source: XTAL input
[    1.951196] dwc_otg lm1: base=0xfe080000
[    1.951207] dwc_otg lm1: dwc_otg_device=0xeea49100
[    1.971335] Core Release: 3.10a
[    1.974412] Setting default values for core params
[    1.977515] curmode: 1, host_only: 1
[    1.980715] dwc_otg lm1: DMA config: BURST_DEFAULT
[    2.000881] Using Buffer DMA mode
[    2.003917] OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.006948] Working on port type = HOST
[    2.010443] dwc_otg lm1: DWC OTG Controller
[    2.014571] dwc_otg lm1: new USB bus registered, assigned bus number 1
[    2.021276] dwc_otg lm1: irq 63, io mem 0x00000000
[    2.026143] -------hcd->flags.d32 = 0
[    2.029999] Init: Port Power? op_state=1
[    2.034024] Init1: Power Port (0)
[    2.038101] hub 1-0:1.0: USB hub found
[    2.041432] hub 1-0:1.0: 1 port detected
[    2.045718] dwc_otg lm0: dwc_otg_driver_probe(ef33a200)
[    2.045753] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
[    2.054177] USB (0) use clock source: XTAL input
[    2.059917] dwc_otg lm0: base=0xfe040000
[    2.059928] dwc_otg lm0: dwc_otg_device=0xeea4ca40
[    2.080026] Core Release: 3.10a
[    2.083150] Setting default values for core params
[    2.086270] curmode: 1, host_only: 0
[    2.129410] dwc_otg lm0: DMA config: BURST_DEFAULT
[    2.149585] Using Buffer DMA mode
[    2.152640] OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.155685] Working on port type = OTG
[    2.158862] Current port type: SLAVE
[    2.162759] dwc_otg lm0: DWC OTG Controller
[    2.166884] dwc_otg lm0: new USB bus registered, assigned bus number 2
[    2.173583] dwc_otg lm0: irq 62, io mem 0x00000000
[    2.178931] hub 2-0:1.0: USB hub found
[    2.182350] hub 2-0:1.0: 1 port detected
[    2.186570] Dedicated Tx FIFOs mode
[    2.190374] using timer detect id change, eea6cc00
[    2.195142] ethernet_driver probe!
[    2.198571] ethernetinit(dbg[c09c4380]=1)
[    2.202697] ethernet base addr is fe0c0000
[    2.206936] write mac add to:eea8ac88: 00 1e 06 10 34 19 |..4|
[    2.217585] libphy: AMLMAC MII Bus: probed
[    2.220623] eth0: PHY ID 001cc916 at 0 IRQ -1 (0:00) active
[    2.224948] eth0: PHY ID 001cc916 at 1 IRQ -1 (0:01) active
[    2.230837] amvideocap_init_module
[    2.234303] amvideocap_probe,amvideocap
[    2.238230] amvideocap_dev_register buf:0da00000,size:a00000.
[    2.238274] Indeed it is in host mode hprt0 = 00021501
[    2.249666] Amlogic A/V streaming port init
[    2.255220] init vdec memsource 9a00000->d9fffff
[    2.258645] [tsync_pcr_init]init success. 
[    2.262805] regist mpeg12 codec profile
[    2.266787] regist mpeg4 codec profile
[    2.270643] amvdec_vc1 module init
[    2.274216] regist vc1 codec profile
[    2.277927] amvdec_h264 module init
[    2.281623] regist h264 codec profile
[    2.285345] amvdec_h265 module init
[    2.289030] regist hevc codec profile
[    2.292829] regist mjpeg codec profile
[    2.296684] amvdec_real module init
[    2.300390] regist real codec profile
[    2.304133] amvdec_avs module init
[    2.307891] regist avc codec profile
[    2.311407] jpegenc module init
[    2.314900] alloc_keep_buffer keep_y_addr ee600000
[    2.319747] alloc_keep_buffer keep_u_addr eec00000
[    2.324580] alloc_keep_buffer keep_v_addr eeb80000
[    2.329528] yaddr=ee600000,u_addr=eec00000,v_addr=eeb80000
[    2.335435] create_ge2d_work_queue video task ok 
[    2.340210] SARADC Driver init.
[    2.343342] __saradc_probe__
[    2.417143] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.421224] Indeed it is in host mode hprt0 = 00001101
[    2.487209] saradc calibration: ref_val = 506
[    2.490093] saradc calibration: ref_nominal = 512
[    2.493780] saradc calibration: coef = 4025
[    2.498398] ir irblaster probe
[    2.501516] Remote Driver
[    2.504437] ==touch_ts_init==
[    2.507355] ==ft5x0x_ts_init==
[    2.510383] ==goodix_ts_init==
[    2.513620] i2c-core: driver [gslx680_compatible] using legacy suspend method
[    2.520887] i2c-core: driver [gslx680_compatible] using legacy resume method
[    2.528086] !!!ntp_ts: ret = 0. 
[    2.531375] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
[    2.537834] i2c-core: driver [ct36x] using legacy suspend method
[    2.543918] i2c-core: driver [ct36x] using legacy resume method
[    2.550025] VTL ct36x TouchScreen driver End.
[    2.554459] ==gsl_ts_init==
[    2.557436] ret=0
[    2.560336] i2c-core: driver [mir3da] using legacy suspend method
[    2.565778] i2c-core: driver [mir3da] using legacy resume method
[    2.571947] i2c-core: driver [lis3dh_acc] using legacy suspend method
[    2.578471] i2c-core: driver [lis3dh_acc] using legacy resume method
[    2.585037] i2c-core: driver [bma222] using legacy suspend method
[    2.591179] i2c-core: driver [bma222] using legacy resume method
[    2.597420] i2c-core: driver [dmard06] using legacy suspend method
[    2.603627] i2c-core: driver [dmard06] using legacy resume method
[    2.609905] lsm303d driver: init
[    2.613275] i2c-core: driver [dmard10] using legacy suspend method
[    2.619232] hub 1-1:1.0: USB hub found
[    2.619564] hub 1-1:1.0: 4 ports detected
[    2.627566] i2c-core: driver [dmard10] using legacy resume method
[    2.633851] stk8313_init
[    2.636556] ======stk831x init ok======
[    2.640493] stk831x_init
[    2.643198] mxc622x accelerometer driver: init
[    2.647800] i2c-core: driver [mxc622x] using legacy suspend method
[    2.654110] i2c-core: driver [mxc622x] using legacy resume method
[    2.660344] mxc6255xc accelerometer driver: init
[    2.665114] i2c-core: driver [mxc6255xc] using legacy suspend method
[    2.671627] i2c-core: driver [mxc6255xc] using legacy resume method
[    2.678100] cm3217 v.1.0.0.1
[    2.681051] i2c-core: driver [elan_epl6814] using legacy suspend method
[    2.687851] i2c-core: driver [elan_epl6814] using legacy resume method
[    2.694512] i2c-core: driver [LTR501] using legacy suspend method
[    2.700730] i2c-core: driver [LTR501] using legacy resume method
[    2.706999] mmc driver version: 1.07, 2014-06-30: eMMC add hw reset function
[    2.715042] host->base fe108e00
[    2.717945] pdata->caps 107
[    2.720678] pdata->caps2 0
[    2.723371] get property:                     port, value:0x00000004
[    2.729654] get property:                ocr_avail, value:0x00200080
[    2.736108] get property:                    f_min, value:0x000493e0
[    2.742620] get property:                    f_max, value:0x05f5e100
[    2.749092] get property:             max_req_size, value:0x00020000
[    2.755547] get property:                   irq_in, value:0x00000003
[    2.762036] get property:                  irq_out, value:0x00000005
[    2.768518] get property:                  gpio_cd, str:CARD_6
[    2.774458] get property:                  pinname, str:sd
[    2.780083] get property:                card_type, value:0x00000005
[    2.786581] get property:                gpio_dat3, str:CARD_4
[    2.792566] get property:               gpio_volsw, str:GPIOAO_3
[    2.798896] aml_sd_voltage_switch[1309] : Switched to voltage -> 3.30 V
[    2.857131] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    2.897431] usb 1-1.1: new low-speed USB device number 3 using dwc_otg
[    2.917101] [aml_sdhc_probe] aml_sdhc_probe() success!
[    2.920555] host->base fe108c20
[    2.923352] pdata->caps 80000507
[    2.926155] pdata->caps2 1
[    2.929019] get property:                     port, value:0x00000002
[    2.935535] get property:                ocr_avail, value:0x00200000
[    2.942034] get property:                    f_min, value:0x000493e0
[    2.948524] get property:                    f_max, value:0x02faf080
[    2.954980] get property:                  f_max_w, value:0x02faf080
[    2.961490] get property:             max_req_size, value:0x00020000
[    2.968001] get property:                  pinname, str:emmc
[    2.973764] get property:                card_type, value:0x00000001
[    2.980269] get property:                gpio_dat3, str:BOOT_3
[    2.986214] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=1
[    3.004698] input: PixArt USB Optical Mouse as /devices/lm1/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[    3.011385] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-lm1-1.1/input0
[    3.061023] sd: new high speed SDHC card at address aaaa, clock 50000000, 4-bit-bus-width
[    3.066973] mmcblk0: sd:aaaa SL16G 14.8 GiB 
[    3.076731]  mmcblk0: p1 p2
[    3.080215] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    3.084282] aml_emmc_hw_reset 1379
[    3.087120] [aml_sdio_probe] aml_sdio_probe() success!
[    3.087247] [dsp]DSP start addr 0xc5e00000
[    3.087276] [dsp]register dsp to char divece(257)
[    3.103231] aml_rtc rtc.1: rtc core: registered aml_rtc as rtc0
[    3.109989] amlogic rfkill init
[    3.113103] Bluetooth: btwake_control_init Driver Ver 1.1
[    3.117562] aml_hw_crypto initialization.
[    3.122479] pcm5102_platform_probe
[    3.125805] enter aml_i2s_dai_probe
[    3.125815] i2s get no clk src setting in dts, use the default mpll 0
[    3.131642] enter aml_pcm_dai_probe
[    3.131856] enter spdif_dit_probe 
[    3.134995] aml_spdif_unmute 
[    3.139082] aml-i2s 0:playback preallocate_dma_buffer: area=f0516000, addr=3ec40000, size=65536
[    3.147459] aml-i2s 1:capture preallocate_dma_buffer: area=f0528000, addr=3ec60000, size=65536
[    3.155821] aml_snd_m8 aml_m8_sound_card.4:  dit-hifi <-> aml-spdif-dai.0 mapping ok
[    3.164885] GACT probability NOT on
[    3.168059] Mirror/redirect action on
[    3.171846] NET: Registered protocol family 10
[    3.176497] mip6: Mobile IPv6
[    3.179682] sit: IPv6 over IPv4 tunneling driver
[    3.184645] NET: Registered protocol family 17
[    3.188305] NET: Registered protocol family 15
[    3.192870] Bridge firewalling registered
[    3.197093] Bluetooth: RFCOMM TTY layer initialized
[    3.201979] Bluetooth: RFCOMM socket layer initialized
[    3.207259] Bluetooth: RFCOMM ver 1.11
[    3.211095] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.216544] Bluetooth: BNEP filters: protocol multicast
[    3.221939] Bluetooth: BNEP socket layer initialized
[    3.227023] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.233124] Bluetooth: HIDP socket layer initialized
[    3.238223] NET: Registered protocol family 35
[    3.243403] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
[    3.250635] Registering SWP/SWPB emulation handler
[    3.255892] pm-meson: probe of aml_pm_m8 failed with error -1
[    3.262088] registered taskstats version 1
[    3.265766] regulator-dummy: disabling
[    3.269829] Mali DRM initialize, driver name: mali_drm, version 2.1
[    3.276318] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
[    3.282231] Mali DRM initialize, driver name: mali_drm, version 2.1
[    3.288866] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
[    3.295352] aml_rtc rtc.1: setting system clock to 1991-09-01 15:15:26 UTC (683738126)
[    3.302888] ### dt-test ### No testcase data in device tree; not running tests
[    3.307428] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[    3.317051] meson_cpufreq_probe:SYSPLL request to be fixed
[    3.322595] meson_cpufreq: no voltage_control prop
[    3.327531] voltage_control = 0
[    3.331673] <<-GTP-INFO->> GTP driver installing...
[    3.335356] buf[0]=f1,buf[1]=af,err=4
[    3.338986] adc=383,TS_C=17,flag=1
[    3.342505] efuse_flag=a
[    3.345187] amlogic_thermal_probe, this chip is trimmed, use thermal
[    3.351754] amlogic-thermal aml_thermal: amlogic thermal probe start
[    3.358260] #thermal-cells=7
[    3.361266] pdata->temp_trip_count=4
[    3.364992] temperature=70 on trip point=0
[    3.369253] fixing high_freq=1488001 to 1488000 at trip point 0,level=3
[    3.375986] fixing low_freq=1488001 to 1488000 at trip point 0,level=3
[    3.382650] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
[    3.389095] cpu[0] core num==3
[    3.392256] gpu[0] core num==2
[    3.395434] temperature=80 on trip point=1
[    3.399702] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
[    3.406463] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
[    3.413143] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
[    3.416871] input: SEM USB Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.0/input/input1
[    3.417217] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-lm1-1.3/input0
[    3.420712] input: SEM USB Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.1/input/input2
[    3.420980] hid-generic 0003:1A2C:0E24.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-lm1-1.3/input1
[    3.458823] cpu[1] core num==2
[    3.462004] gpu[1] core num==2
[    3.465186] temperature=90 on trip point=2
[    3.469452] fixing high_freq=800001 to 696000 at trip point 2,level=11
[    3.476098] fixing low_freq=800001 to 696000 at trip point 2,level=11
[    3.482669] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
[    3.489069] cpu[2] core num==1
[    3.492194] gpu[2] core num==1
[    3.495354] temperature=110 on trip point=3
[    3.499701] fixing high_freq=-1 to -22 at trip point 3,level=-1
[    3.505733] fixing low_freq=-1 to -22 at trip point 3,level=-1
[    3.511712] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
[    3.517982] cpu[3] core num==-1
[    3.521241] gpu[3] core num==-1
[    3.524514] idle interval=1000
[    3.527710] pdata->name:aml_thermal
[    3.531585] tmp_trip[0].cpu_core_upper=1
[    3.535409] tmp_trip[1].cpu_core_upper=2
[    3.539468] tmp_trip[2].cpu_core_upper=3
[    3.543500] tmp_trip[3].cpu_core_upper=-1
[    3.547641] aml_thermal bind thermal-cpucore-0 okay !
[    3.552844] aml_thermal bind thermal-cpufreq-0 okay !
[    3.558012] pdata->tmp_trip[0].gpu_lower_level=1
[    3.562730] pdata->tmp_trip[0].gpu_upper_level=1
[    3.567481] pdata->tmp_trip[1].gpu_lower_level=2
[    3.572174] pdata->tmp_trip[1].gpu_upper_level=2
[    3.576903] pdata->tmp_trip[2].gpu_lower_level=4
[    3.581660] pdata->tmp_trip[2].gpu_upper_level=4
[    3.586401] pdata->tmp_trip[3].gpu_lower_level=-1
[    3.591238] pdata->tmp_trip[3].gpu_upper_level=-1
[    3.596066] aml_thermal bind thermal-gpufreq-0 okay !
[    3.601398] amlogic: Kernel Thermal management registered
[    3.606832] amlogic-thermal aml_thermal: amlogic thermal probe done
[    3.613324] hdmitx: cec: CEC init
[    3.616798] hdmitx: cec: CEC task process
[    3.616939] input: cec_input as /devices/virtual/input/input3
[    3.617140] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[    3.617140] ALSA device list:
[    3.617143]   #0: ODROID-HDMI
[    3.638912] config uart_ao_ttyS0:: Character length 8bits/char
[    3.657099] Changing uart_ao_ttyS0: baud from 0 to 115200
[    3.677297] Freeing unused kernel memory: 224K (c0939000 - c0971000)
[    3.730386] systemd-udevd[109]: starting version 215
[    4.114006] tvmode set to 800x600p60hz

[    4.120742] don't set the same mode as current.
[    4.146518] tvmode set to 800x600p60hz

[    4.150906] don't set the same mode as current.
[    5.995809] force enable DISCARD here for ext4 fs
[    6.057601] checked enable EXT4 DISCARD here
[    6.059756] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard
[    6.070371] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    6.354675] config uart_ao_ttyS0:: Character length 8bits/char
[    6.357017] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.369595] systemd[1]: Detected architecture 'arm'.
[    6.389588] config uart_ao_ttyS0:: Character length 8bits/char
[    6.461620] systemd[1]: Inserted module 'autofs4'
[    6.465228] systemd[1]: Set hostname to <gamestation-turbo>.
[    6.497687] config uart_ao_ttyS0:: Character length 8bits/char
[    6.847202] systemd[1]: Cannot add dependency job for unit c1-init.service, ignoring: Unit c1-init.service failed to load: No such file or directory.
[    6.862470] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.867424] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.874780] systemd[1]: Expecting device dev-ttyS0.device...
[    6.881007] config uart_ao_ttyS0:: Character length 8bits/char
[    6.897213] systemd[1]: Starting Remote File Systems (Pre).
[    6.899927] config uart_ao_ttyS0:: Character length 8bits/char
[    6.917167] systemd[1]: Reached target Remote File Systems (Pre).
[    6.920201] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.928561] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.936463] systemd[1]: Starting Paths.
[    6.940695] config uart_ao_ttyS0:: Character length 8bits/char
[    6.957176] systemd[1]: Reached target Paths.
[    6.959680] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.968019] config uart_ao_ttyS0:: Character length 8bits/char
[    6.987191] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.995869] systemd[1]: Starting Encrypted Volumes.
[    6.998809] config uart_ao_ttyS0:: Character length 8bits/char
[    7.017181] systemd[1]: Reached target Encrypted Volumes.
[    7.019570] systemd[1]: Starting Swap.
[    7.023549] config uart_ao_ttyS0:: Character length 8bits/char
[    7.037197] systemd[1]: Reached target Swap.
[    7.039576] systemd[1]: Expecting device dev-mmcblk0p1.device...
[    7.044723] config uart_ao_ttyS0:: Character length 8bits/char
[    7.057177] systemd[1]: Starting Root Slice.
[    7.059838] config uart_ao_ttyS0:: Character length 8bits/char
[    7.077179] systemd[1]: Created slice Root Slice.
[    7.079549] systemd[1]: Starting Delayed Shutdown Socket.
[    7.084647] config uart_ao_ttyS0:: Character length 8bits/char
[    7.097167] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.099746] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.106893] config uart_ao_ttyS0:: Character length 8bits/char
[    7.108144] emmc: mmc_rescan_try_freq: trying to init card at 300000 Hz
[    7.127188] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.131061] systemd[1]: Starting Journal Socket (/dev/log).
[    7.137187] config uart_ao_ttyS0:: Character length 8bits/char
[    7.147106] aml_emmc_hw_reset 1379
[    7.157191] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.160017] systemd[1]: Starting User and Session Slice.
[    7.165902] config uart_ao_ttyS0:: Character length 8bits/char
[    7.177179] systemd[1]: Created slice User and Session Slice.
[    7.179893] systemd[1]: Starting udev Control Socket.
[    7.185397] config uart_ao_ttyS0:: Character length 8bits/char
[    7.197168] systemd[1]: Listening on udev Control Socket.
[    7.199623] systemd[1]: Starting udev Kernel Socket.
[    7.204927] config uart_ao_ttyS0:: Character length 8bits/char
[    7.217174] systemd[1]: Listening on udev Kernel Socket.
[    7.219672] systemd[1]: Starting Journal Socket.
[    7.224600] config uart_ao_ttyS0:: Character length 8bits/char
[    7.237200] systemd[1]: Listening on Journal Socket.
[    7.239775] systemd[1]: Starting System Slice.
[    7.244120] config uart_ao_ttyS0:: Character length 8bits/char
[    7.257194] systemd[1]: Created slice System Slice.
[    7.259749] systemd[1]: Started File System Check on Root Device.
[    7.265323] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    7.271832] config uart_ao_ttyS0:: Character length 8bits/char
[    7.287168] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.290549] systemd[1]: Starting Increase datagram queue length...
[    7.297119] config uart_ao_ttyS0:: Character length 8bits/char
[    7.319095] systemd[1]: Starting udev Coldplug all Devices...
[    7.322283] config uart_ao_ttyS0:: Character length 8bits/char
[    7.339498] systemd[1]: Mounting Debug File System...
[    7.342535] config uart_ao_ttyS0:: Character length 8bits/char
[    7.378811] systemd[1]: Starting Load Kernel Modules...
[    7.381856] config uart_ao_ttyS0:: Character length 8bits/char
[    7.399252] systemd[1]: Mounting POSIX Message Queue File System...
[    7.403017] config uart_ao_ttyS0:: Character length 8bits/char
[    7.429000] systemd[1]: Started Set Up Additional Binary Formats.
[    7.432506] systemd[1]: Mounted Huge Pages File System.
[    7.438028] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.450032] config uart_ao_ttyS0:: Character length 8bits/char
[    7.463978] fuse init (API version 7.22)
[    7.489426] systemd[1]: Starting system-getty.slice.
[    7.492929] config uart_ao_ttyS0:: Character length 8bits/char
[    7.507234] systemd[1]: Created slice system-getty.slice.
[    7.509929] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.516360] config uart_ao_ttyS0:: Character length 8bits/char
[    7.527188] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.530689] systemd[1]: Starting LSB: Resize the root filesystem to fill partition...
[    7.538931] config uart_ao_ttyS0:: Character length 8bits/char
[    7.558842] systemd[1]: Starting Slices.
[    7.561929] config uart_ao_ttyS0:: Character length 8bits/char
[    7.577222] systemd[1]: Reached target Slices.
[    7.581784] config uart_ao_ttyS0:: Character length 8bits/char
[    7.597254] systemd[1]: Mounted POSIX Message Queue File System.
[    7.600906] config uart_ao_ttyS0:: Character length 8bits/char
[    7.617228] systemd[1]: Mounted Debug File System.
[    7.621212] config uart_ao_ttyS0:: Character length 8bits/char
[    7.637271] systemd[1]: Started Increase datagram queue length.
[    7.645242] config uart_ao_ttyS0:: Character length 8bits/char
[    7.657315] systemd[1]: Started Load Kernel Modules.
[    7.662026] config uart_ao_ttyS0:: Character length 8bits/char
[    7.677280] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.686823] systemd[1]: resize2fs_once.service: control process exited, code=exited status=1
[    7.693428] config uart_ao_ttyS0:: Character length 8bits/char
[    7.707508] config uart_ao_ttyS0:: Character length 8bits/char
[    7.727252] systemd[1]: Failed to start LSB: Resize the root filesystem to fill partition.
[    7.732795] systemd[1]: Unit resize2fs_once.service entered failed state.
[    7.740780] config uart_ao_ttyS0:: Character length 8bits/char
[    7.757250] systemd[1]: Started udev Coldplug all Devices.
[    7.848541] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.852528] config uart_ao_ttyS0:: Character length 8bits/char
[    7.869457] systemd[1]: Starting Apply Kernel Variables...
[    7.872522] config uart_ao_ttyS0:: Character length 8bits/char
[    7.889861] systemd[1]: Mounting Configuration File System...
[    7.893326] config uart_ao_ttyS0:: Character length 8bits/char
[    7.909337] systemd[1]: Mounting FUSE Control File System...
[    7.912736] config uart_ao_ttyS0:: Character length 8bits/char
[    7.929258] systemd[1]: Starting Syslog Socket.
[    7.932862] config uart_ao_ttyS0:: Character length 8bits/char
[    7.947228] systemd[1]: Listening on Syslog Socket.
[    7.949979] systemd[1]: Starting Journal Service...
[    7.954599] config uart_ao_ttyS0:: Character length 8bits/char
[    7.969585] config uart_ao_ttyS0:: Character length 8bits/char
[    7.987225] systemd[1]: Started Journal Service.
[    7.994471] config uart_ao_ttyS0:: Character length 8bits/char
[    8.007675] config uart_ao_ttyS0:: Character length 8bits/char
[    8.028631] config uart_ao_ttyS0:: Character length 8bits/char
[    8.048487] config uart_ao_ttyS0:: Character length 8bits/char
[    8.111278] config uart_ao_ttyS0:: Character length 8bits/char
[    8.163141] systemd-udevd[212]: starting version 215
[    8.165962] config uart_ao_ttyS0:: Character length 8bits/char
[    8.177959] config uart_ao_ttyS0:: Character length 8bits/char
[    8.201532] config uart_ao_ttyS0:: Character length 8bits/char
[    8.221463] config uart_ao_ttyS0:: Character length 8bits/char
[    8.242090] config uart_ao_ttyS0:: Character length 8bits/char
[    8.324970] config uart_ao_ttyS0:: Character length 8bits/char
[    8.588876] config uart_ao_ttyS0:: Character length 8bits/char
[    8.652481] config uart_ao_ttyS0:: Character length 8bits/char
[    8.680037] Driver for 1-wire Dallas network protocol.
[    8.680283] config uart_ao_ttyS0:: Character length 8bits/char
[    8.683439] aml_gpio_probe : success
[    8.700274] config uart_ao_ttyS0:: Character length 8bits/char
[    8.762621] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    8.773634] config uart_ao_ttyS0:: Character length 8bits/char
[    8.807540] config uart_ao_ttyS0:: Character length 8bits/char
[    8.831733] config uart_ao_ttyS0:: Character length 8bits/char
[    8.903733] config uart_ao_ttyS0:: Character length 8bits/char
[    9.226443] ionvideo open
[    9.229456] ionvideo_stop_generating!!!!
[    9.232040] ionvideo release
[    9.434349] config uart_ao_ttyS0:: Character length 8bits/char
[    9.449797] config uart_ao_ttyS0:: Character length 8bits/char
[    9.487873] config uart_ao_ttyS0:: Character length 8bits/char
[    9.589234] config uart_ao_ttyS0:: Character length 8bits/char
[    9.621111] config uart_ao_ttyS0:: Character length 8bits/char
[    9.673481] config uart_ao_ttyS0:: Character length 8bits/char
[    9.700706] config uart_ao_ttyS0:: Character length 8bits/char
[    9.719633] config uart_ao_ttyS0:: Character length 8bits/char
[    9.740937] config uart_ao_ttyS0:: Character length 8bits/char
[    9.761157] config uart_ao_ttyS0:: Character length 8bits/char
[    9.777758] config uart_ao_ttyS0:: Character length 8bits/char
[    9.800144] config uart_ao_ttyS0:: Character length 8bits/char
[    9.820656] config uart_ao_ttyS0:: Character length 8bits/char
[    9.844394] config uart_ao_ttyS0:: Character length 8bits/char
[    9.890001] config uart_ao_ttyS0:: Character length 8bits/char
[    9.927341] systemd-journald[211]: Received request to flush runtime journal from PID 1
[    9.933037] config uart_ao_ttyS0:: Character length 8bits/char
[    9.991587] config uart_ao_ttyS0:: Character length 8bits/char
[   10.014119] config uart_ao_ttyS0:: Character length 8bits/char
[   10.086409] config uart_ao_ttyS0:: Character length 8bits/char
[   10.103296] config uart_ao_ttyS0:: Character length 8bits/char
[   10.117909] config uart_ao_ttyS0:: Character length 8bits/char
[   10.314702] config uart_ao_ttyS0:: Character length 8bits/char
[   10.333110] config uart_ao_ttyS0:: Character length 8bits/char
[   10.349823] config uart_ao_ttyS0:: Character length 8bits/char
[   10.369736] config uart_ao_ttyS0:: Character length 8bits/char
[   10.387663] config uart_ao_ttyS0:: Character length 8bits/char
[   10.411350] config uart_ao_ttyS0:: Character length 8bits/char
[   10.427792] config uart_ao_ttyS0:: Character length 8bits/char
[   10.449639] config uart_ao_ttyS0:: Character length 8bits/char
[   10.469999] config uart_ao_ttyS0:: Character length 8bits/char
[   10.487891] config uart_ao_ttyS0:: Character length 8bits/char
[   10.509608] config uart_ao_ttyS0:: Character length 8bits/char
[   10.530199] config uart_ao_ttyS0:: Character length 8bits/char
[   10.627566] config uart_ao_ttyS0:: Character length 8bits/char
[   11.383564] config uart_ao_ttyS0:: Character length 8bits/char
[   11.400623] config uart_ao_ttyS0:: Character length 8bits/char
[   11.420262] config uart_ao_ttyS0:: Character length 8bits/char
[   11.441696] config uart_ao_ttyS0:: Character length 8bits/char
[   11.460376] config uart_ao_ttyS0:: Character length 8bits/char
[   11.480542] config uart_ao_ttyS0:: Character length 8bits/char
[   11.500044] config uart_ao_ttyS0:: Character length 8bits/char
[   11.532207] config uart_ao_ttyS0:: Character length 8bits/char
[   11.552402] config uart_ao_ttyS0:: Character length 8bits/char
[   11.568909] config uart_ao_ttyS0:: Character length 8bits/char
[   11.588956] config uart_ao_ttyS0:: Character length 8bits/char
[   11.610469] config uart_ao_ttyS0:: Character length 8bits/char
[   11.628925] config uart_ao_ttyS0:: Character length 8bits/char
[   11.649002] config uart_ao_ttyS0:: Character length 8bits/char
[   11.668729] config uart_ao_ttyS0:: Character length 8bits/char
[   11.689303] config uart_ao_ttyS0:: Character length 8bits/char
[   11.812246] config uart_ao_ttyS0:: Character length 8bits/char
[   11.840853] config uart_ao_ttyS0:: Character length 8bits/char
[   11.860958] config uart_ao_ttyS0:: Character length 8bits/char
[   11.879250] config uart_ao_ttyS0:: Character length 8bits/char
[   11.899743] config uart_ao_ttyS0:: Character length 8bits/char
[   11.921159] config uart_ao_ttyS0:: Character length 8bits/char
[   11.939872] config uart_ao_ttyS0:: Character length 8bits/char
[   11.960502] config uart_ao_ttyS0:: Character length 8bits/char
[   11.980287] config uart_ao_ttyS0:: Character length 8bits/char
[   11.998471] config uart_ao_ttyS0:: Character length 8bits/char
[   12.021066] config uart_ao_ttyS0:: Character length 8bits/char
[   12.038415] config uart_ao_ttyS0:: Character length 8bits/char
[   12.075499] config uart_ao_ttyS0:: Character length 8bits/char
[   12.106097] config uart_ao_ttyS0:: Character length 8bits/char
[   12.137326] config uart_ao_ttyS0:: Character length 8bits/char
[   12.193628] config uart_ao_ttyS0:: Character length 8bits/char
[   12.223666] config uart_ao_ttyS0:: Character length 8bits/char
[   12.233101] netdev_open
[   12.235470] Ethernet reset
[   12.237861] NET MDA descpter start addr=edb00000
[   12.297298] phy_interface = 0
[   12.299963] aml_phy_init:  trying to attach to 0:01
[   12.302554] am_rtl811f called phy reset
[    9.223394] amlvideo openamlvideo close
[   12.317257] --1--write mac add to:
[   12.319733] eea8ac88: 00 1e 06 10 34 19 |..4|
[   12.322990] --2--write mac add to:eea8ac88: 00 1e 06 10 34 19 |..4|
[   12.331126] write mac add to:eea8ac88: 00 1e 06 10 34 19 |..4|
[   12.336092] Current DMA mode=0, set mode=621c100
[   12.341366] eth0: opened (irq 40).
[   12.351376] ether leave promiscuous mode
[   12.353671] ether leave all muticast mode
[   12.356510] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.381513] config uart_ao_ttyS0:: Character length 8bits/char
[   12.402339] config uart_ao_ttyS0:: Character length 8bits/char
[   12.912987] config uart_ao_ttyS0:: Character length 8bits/char
[   13.188258] create_disp_get_ump_secure_id******0
[   13.189199] create_disp_get_ump_secure_id******1
[   14.088866] config uart_ao_ttyS0:: Character length 8bits/char
[   14.117635] config uart_ao_ttyS0:: Character length 8bits/char
[   14.424791] config uart_ao_ttyS0:: Character length 8bits/char
[   14.442567] config uart_ao_ttyS0:: Character length 8bits/char
[   14.570438] config uart_ao_ttyS0:: Character length 8bits/char
[   14.803329] config uart_ao_ttyS0:: Character length 8bits/char
[   14.933240] config uart_ao_ttyS0:: Character length 8bits/char
[   14.948779] config uart_ao_ttyS0:: Character length 8bits/char
[   16.125452] config uart_ao_ttyS0:: Character length 8bits/char
[   16.148995] config uart_ao_ttyS0:: Character length 8bits/char
[   16.167829] config uart_ao_ttyS0:: Character length 8bits/char
[   16.189964] config uart_ao_ttyS0:: Character length 8bits/char
[   16.207757] config uart_ao_ttyS0:: Character length 8bits/char
[   16.233297] config uart_ao_ttyS0:: Character length 8bits/char
[   16.247460] config uart_ao_ttyS0:: Character length 8bits/char
[   16.285630] config uart_ao_ttyS0:: Character length 8bits/char
[   16.309463] config uart_ao_ttyS0:: Character length 8bits/char
[   16.309779] config uart_ao_ttyS0:: Character length 8bits/char
[   16.317717] [adjust link] -> eth: full-duplex
[   16.317758] [adjust link] -> eth: phy_speed <> priv_speed)
[   16.322276] [adjust link -> eth: am_adjust_link state change (new_state=true)
[   16.329565] libphy: 0:01 - Link is Up - 1000/Full
[   16.335619] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.356114] config uart_ao_ttyS0:: Character length 8bits/char
[   16.357527] config uart_ao_ttyS0:: Character length 8bits/char
[   24.820486] runtime dma_bytes 65536,stream type 0 
[   24.820642] ----aml_hw_iec958_init,runtime->rate=44100--
[   24.825315] audio_set_958_clk, freq=5,
[   24.829431] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   24.835923] iec958 mode PCM16
[   24.839189] IEC958 16bit
[   24.841731] hdmitx: audio: aout notify rate 44100
[   24.846965] hdmitx: audio: aout notify size 16
[   24.851384] hdmitx: audio: aout notify format CT_PCM
[   24.856314] hdmitx: audio: audio channel num is 1
[   24.861524] hdmitx: audio: SPDIF
[   24.864585] hdmitx: audio: current VIC: 76
[   24.868974] hdmitx: audio: audio sample rate: 2
[   24.873507] hdmitx: audio: reset audio N para
[   24.878191] hdmitx: audio: PCM out to HDMI
[   24.893821] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   24.893957] hdmitx: audio: i2s_to_spdif_flag:1 
[   24.898851] hdmitx: audio: Enable audio spdif to HDMI
[   24.903865] hdmitx: audio: Audio Type: PCM
[   24.908315] hdmitx: audio: set audio param
[   24.912649] ----aml_hw_iec958_init,runtime->rate=44100--
[   24.918022] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   24.924536] iec958 mode PCM16
[   24.927807] IEC958 16bit
[   24.930356] hdmitx: audio: aout notify rate 44100
[   24.935221] hdmitx: audio: aout notify size 16
[   24.939998] hdmitx: audio: audio channel num is 1
[   24.944681] hdmitx: audio: SPDIF
[   24.948255] hdmitx: audio: current VIC: 76
[   24.952319] hdmitx: audio: audio sample rate: 2
[   24.957141] hdmitx: audio: reset audio N para
[   24.961518] hdmitx: audio: PCM out to HDMI
[   24.977278] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   24.977393] hdmitx: audio: i2s_to_spdif_flag:1 
[   24.982118] hdmitx: audio: Enable audio spdif to HDMI
[   24.987478] hdmitx: audio: Audio Type: PCM
[   24.991609] hdmitx: audio: set audio param
[   25.142225] runtime dma_bytes 65536,stream type 1 
[   26.187005] alsa capture long time no data, quit xrun!
[   27.207008] alsa capture long time no data, quit xrun!
[   28.226998] alsa capture long time no data, quit xrun!
[   29.246983] alsa capture long time no data, quit xrun!
[   50.137081] runtime dma_bytes 65536,stream type 1 
[   50.173540] runtime dma_bytes 65536,stream type 1 
[   50.176390] runtime dma_bytes 65536,stream type 1 
[   50.179596] runtime dma_bytes 65536,stream type 0 
[   50.182788] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.188302] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.194931] iec958 mode PCM16
[   50.198086] IEC958 16bit
[   50.200746] hdmitx: audio: aout notify rate 44100
[   50.205605] hdmitx: audio: aout notify size 16
[   50.210250] hdmitx: audio: audio channel num is 0
[   50.215075] hdmitx: audio: SPDIF
[   50.218492] hdmitx: audio: current VIC: 76
[   50.222717] hdmitx: audio: audio sample rate: 2
[   50.227428] hdmitx: audio: reset audio N para
[   50.231925] hdmitx: audio: PCM out to HDMI
[   50.247379] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.247484] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.252172] hdmitx: audio: Enable audio spdif to HDMI
[   50.257518] hdmitx: audio: Audio Type: PCM
[   50.261678] hdmitx: audio: set audio param
[   50.265989] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.271397] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.278081] iec958 mode PCM16
[   50.281180] IEC958 16bit
[   50.283871] hdmitx: audio: aout notify rate 44100
[   50.288753] hdmitx: audio: aout notify size 16
[   50.293337] hdmitx: audio: audio channel num is 0
[   50.298245] hdmitx: audio: SPDIF
[   50.301593] hdmitx: audio: current VIC: 76
[   50.305839] hdmitx: audio: audio sample rate: 2
[   50.310553] hdmitx: audio: reset audio N para
[   50.315052] hdmitx: audio: PCM out to HDMI
[   50.330536] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.330641] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.335329] hdmitx: audio: Enable audio spdif to HDMI
[   50.340562] hdmitx: audio: Audio Type: PCM
[   50.344837] hdmitx: audio: set audio param
[   50.364868] runtime dma_bytes 65536,stream type 1 
[   50.366267] runtime dma_bytes 65536,stream type 1 
[   50.370792] runtime dma_bytes 65536,stream type 1 
[   50.375479] runtime dma_bytes 65536,stream type 0 
[   50.379103] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.384517] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.391232] iec958 mode PCM16
[   50.394330] IEC958 16bit
[   50.397056] hdmitx: audio: aout notify rate 44100
[   50.401887] hdmitx: audio: aout notify size 16
[   50.406485] hdmitx: audio: audio channel num is 1
[   50.411403] hdmitx: audio: SPDIF
[   50.414742] hdmitx: audio: current VIC: 76
[   50.419015] hdmitx: audio: audio sample rate: 2
[   50.423678] hdmitx: audio: reset audio N para
[   50.428222] hdmitx: audio: PCM out to HDMI
[   50.443632] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.443737] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.448458] hdmitx: audio: Enable audio spdif to HDMI
[   50.453641] hdmitx: audio: Audio Type: PCM
[   50.457953] hdmitx: audio: set audio param
[   50.462248] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.467651] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.474307] iec958 mode PCM16
[   50.477457] IEC958 16bit
[   50.480126] hdmitx: audio: aout notify rate 44100
[   50.484985] hdmitx: audio: aout notify size 16
[   50.489613] hdmitx: audio: audio channel num is 1
[   50.494455] hdmitx: audio: SPDIF
[   50.497863] hdmitx: audio: current VIC: 76
[   50.502093] hdmitx: audio: audio sample rate: 2
[   50.506781] hdmitx: audio: reset audio N para
[   50.511326] hdmitx: audio: PCM out to HDMI
[   50.526761] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.526898] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.531557] hdmitx: audio: Enable audio spdif to HDMI
[   50.536769] hdmitx: audio: Audio Type: PCM
[   50.541080] hdmitx: audio: set audio param
[   50.546554] runtime dma_bytes 65536,stream type 1 
[   50.551720] runtime dma_bytes 65536,stream type 1 
[   50.556418] runtime dma_bytes 65536,stream type 1 
[   50.570054] runtime dma_bytes 65536,stream type 0 
[   50.570109] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.574853] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.581580] iec958 mode PCM16
[   50.584670] IEC958 16bit
[   50.587387] hdmitx: audio: aout notify rate 44100
[   50.592225] hdmitx: audio: aout notify size 16
[   50.597019] hdmitx: audio: audio channel num is 1
[   50.601690] hdmitx: audio: SPDIF
[   50.605078] hdmitx: audio: current VIC: 76
[   50.609356] hdmitx: audio: audio sample rate: 2
[   50.614017] hdmitx: audio: reset audio N para
[   50.618558] hdmitx: audio: PCM out to HDMI
[   50.633992] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.634097] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.638815] hdmitx: audio: Enable audio spdif to HDMI
[   50.644000] hdmitx: audio: Audio Type: PCM
[   50.648315] hdmitx: audio: set audio param
[   50.652613] ----aml_hw_iec958_init,runtime->rate=44100--
[   50.658989] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   50.664901] iec958 mode PCM16
[   50.667859] IEC958 16bit
[   50.670496] hdmitx: audio: aout notify rate 44100
[   50.675355] hdmitx: audio: aout notify size 16
[   50.680004] hdmitx: audio: audio channel num is 1
[   50.684817] hdmitx: audio: SPDIF
[   50.688247] hdmitx: audio: current VIC: 76
[   50.692454] hdmitx: audio: audio sample rate: 2
[   50.697170] hdmitx: audio: reset audio N para
[   50.701665] hdmitx: audio: PCM out to HDMI
[   50.717120] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[   50.717229] hdmitx: audio: i2s_to_spdif_flag:1 
[   50.721916] hdmitx: audio: Enable audio spdif to HDMI
[   50.727157] hdmitx: audio: Audio Type: PCM
[   50.731423] hdmitx: audio: set audio param
[   50.757208] runtime dma_bytes 65536,stream type 1 
[   51.806841] alsa capture long time no data, quit xrun!
[   52.826826] alsa capture long time no data, quit xrun!
[   53.846823] alsa capture long time no data, quit xrun!
[   54.866814] alsa capture long time no data, quit xrun!
[  873.171818] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[  873.476306] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-lm1-1.2/input2
[  873.489181] input: Logitech Unifying Device. Wireless PID:400d as /devices/lm1/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0006/input/input4
[  873.497328] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400d] on usb-lm1-1.2:2
Hope this will help, Thank you again !

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Wed Feb 10, 2016 12:51 am

In fact It works now ! I don't know why, :?: I tried three times this morning (with all combinaison : plug at start, plug after, keyboard on, keyboard off, etc.) without succes : crashing everytimes then after I made test under ubuntu and I'm actually typing with the keyboard, everything is ok I'm happy, very sorry for the inconvenience :shock: .Should I remove the precedent posts ?

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Wed Feb 10, 2016 1:18 am

nah it's fine, since it's in code tags it doesn't take up too much space, but at least we can see Ubuntu and Debian reacting the same here :)
The C1 has many issues with the USB drivers. I have wireless keyboard mouse as well and plug them in or out while C1 running can already cause the system to freeze/crash.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Wed Mar 02, 2016 12:01 am

Hello ! It's me again, I post for feedback and help.
My system C1+ starts directly in debian and I use Emulationstation instead of Kodi for gaming and my screen is a 800*600 lcd hdmi.
-Dreamcast = blackscreen
-PsPP doesn't works, I'v got the interface (with black transparency) but all games and demo I tried = blackscreen;
Do you think is it about my screen ? I didn't try on TV...

-For Neo Geo games, if I put them in the Neo Geo folder, it's "MSX" in emulationstation, so I put some real msx games to see and I have two "msx" logo now, it's not important cause I'll put them in FBA
-For Cps 1 and 2, emulationstation creates 2 "mame" logo/folder.
- I'll need help for scumm games, do you have any tips ? I don't have "scumm" in E.S (for gui), perhaps I missed something...

Except this little things (cause Dreamcast and Pspp is "bonus", I didn't expect this two emulators on my tiny C1+), everything is fine and I'm very satisfied by "Gamestation turbo".
Thanks.

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Wed Mar 02, 2016 4:46 pm

kolkovrok wrote:Hello ! It's me again, I post for feedback and help.
My system C1+ starts directly in debian and I use Emulationstation instead of Kodi for gaming and my screen is a 800*600 lcd hdmi.
-Dreamcast = blackscreen
Make sure you have the required BIOS files installed, or else it's gonna try to use the HLE BIOS which won't work.
kolkovrok wrote: -PsPP doesn't works, I'v got the interface (with black transparency) but all games and demo I tried = blackscreen;
Do you think is it about my screen ? I didn't try on TV...
No, that's an issue of the C1, it can't do Alpha correctly resulting in black borders. If you try to use Libreoffice for example you'll see the same thing, entire menu is black.
That's an C1 only issue and very annoying. Since you don't use Kodi, you can change the /boot/boot.ini file and select 24 or 16 bit color instead. This will remove Alpha completely in therefor you should get rid of the black borders as well. But with the limitation, that no software is working that relies on 32bit colors (for example you can't watch movies in Kodi without 32bit).
kolkovrok wrote:-For Neo Geo games, if I put them in the Neo Geo folder, it's "MSX" in emulationstation
I'll check on the options of NeoGeo in EmulationStation. Maybe I mixed them up. Also make sure your image is up to date:

Code: Select all

apt-get update && apt-get upgrade && apt-get dist-upgrade
kolkovrok wrote:so I put some real msx games to see and I have two "msx" logo now, it's not important cause I'll put them in FBA
The logos are a fake anyway.. You can replace them with anything you want. I even use the MAME logo multiple times, since there is none for FBA.
kolkovrok wrote:-For Cps 1 and 2, emulationstation creates 2 "mame" logo/folder.
as mentioned above there are no FBA logo in EmulationStation (maybe in some other Themes, but not in the default "simple" theme).
kolkovrok wrote:- I'll need help for scumm games, do you have any tips ? I don't have "scumm" in E.S (for gui), perhaps I missed something...
I'll check on that. Once again, make sure your image is up to date.
kolkovrok wrote:Except this little things (cause Dreamcast and Pspp is "bonus", I didn't expect this two emulators on my tiny C1+), everything is fine and I'm very satisfied by "Gamestation turbo".
Thanks.
Thanks for the feedback it's very appreciated :)
Dreamcast and PSP should work nonetheless. Especially DreamCast is not very demanding (for the games that work).
PSP should work in reduced quality but should work as well, just the Alpha issue on the C1 is very annoying with it. (try reducing the colors and see how it works).
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Wed Mar 02, 2016 10:41 pm

ola ! for yesterday :
Make sure you have the required BIOS files installed, or else it's gonna try to use the HLE BIOS which won't work.
I tried with different version of the bios ((dc_boot.bin, dc_flash.bin ??) and two games (san francisco rush and marvel vs capcom); with no succes, i'll continue to search and keep in touch with you.
No, that's an issue of the C1, it can't do Alpha correctly resulting in black borders., etc.
Yeah I read about that before on your first page and yet change the color bit : no way for me... and In fact I use kodi for mediacenter sometimes but not for gaming front end. I didn't see the issue in libreoffice (not important but cool to understand).
For the rest (the logos), I 'll change manually soon with my creations; and Scumm will be ok,I think (I found the gui acces in my files), thx.

But today I 've a new strange problem : updates and packages seems to be broken in my image, in terminal i've an error (for apt-get update) ;
package installer say to me "software index is broken";
I've a fatal error in Update manager too
and synaptic package manager say : "an error occured, unable to parse package file / var/lib/apt/lists/, etc the package lists or status file could not be parsed or opened.
E_cache open failed; please report" so I 'm blocked and I can't do anything
Fortunatly, I've made a copy of my image last week, all the update/packages manager gui works but for update in the terminal I've got the same error :

Code: Select all

Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied)
E: Unable to lock directory /var/lib/apt/lists/
could not open lock file /var/lib/dpkg/lock - open (13 : Permission denied)
E: unable to lock the administration directory (/var/lib/dpkg/), are you root ?
and if I'm root it say to me : "odroid is not in the sudoers file.this incident will be reported"
Bizarre Bizarre...

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Thu Mar 03, 2016 4:40 pm

Hello let's see what we can figure out :)
kolkovrok wrote:I tried with different version of the bios ((dc_boot.bin, dc_flash.bin ??) and two games (san francisco rush and marvel vs capcom); with no succes, i'll continue to search and keep in touch with you.
Make sure the BIOS files are in the right folder. Most likely /home/odroid/.reicast/data/
If you start the emulator without a ROM (for example from terminal) it should boot into the System Menu (BIOS) of the Dreamcast if the files are ok. That's a good way to test if the BIOS is working.
kolkovrok wrote:For the rest (the logos), I 'll change manually soon with my creations; and Scumm will be ok,I think (I found the gui acces in my files), thx.
I checked on ScummVM it's working fine for me. Make sure you have the ".svm" files in the SCUMMVM folder (check the example that's in there) and it should work fine :)
kolkovrok wrote:But today I 've a new strange problem : updates and packages seems to be broken in my image, in terminal i've an error (for apt-get update) ;
package installer say to me "software index is broken";
I've a fatal error in Update manager too
and synaptic package manager say : "an error occured, unable to parse package file / var/lib/apt/lists/, etc the package lists or status file could not be parsed or opened.
E_cache open failed; please report" so I 'm blocked and I can't do anything
Fortunatly, I've made a copy of my image last week, all the update/packages manager gui works but for update in the terminal I've got the same error :

Code: Select all

Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied)
E: Unable to lock directory /var/lib/apt/lists/
could not open lock file /var/lib/dpkg/lock - open (13 : Permission denied)
E: unable to lock the administration directory (/var/lib/dpkg/), are you root ?
and if I'm root it say to me : "odroid is not in the sudoers file.this incident will be reported"
Bizarre Bizarre...
Ok, first I separated "normal" user and "root" user on this image. Since the game should be "save" for children to use, the default user has no sudo permission and is not allowed to update install and do other root stuff.
You have to login as "root" to do so. For this, simply open a Terminal and type

Code: Select all

su -
After that all commands should work fine.

Code: Select all

apt-get update && apt-get upgrade && apt-get dist-upgrade
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Thu Mar 03, 2016 8:00 pm

Yep ! good morning
Make sure the BIOS files are in the right folder. Most likely /home/odroid/.reicast/data/
In the beginning I put it in the odroid/ROMS like the others bios, so It couldn''t be OK and now it's a first step but :
this file path doesn't exist in my image, the only "reicast" folder for me is in /usr/local/share (and I don't have the"."), I tried to put the bios in for see but permission denied; inside there is only a folder "mappings".
So...
I checked on ScummVM it's working fine for me. Make sure you have the ".svm" files in the SCUMMVM folder (check the example that's in there) and it should work fine :)
Everything is ok after the update, I have now scumm in the menu, perfect !
Ok, first I separated "normal" user and "root" user on this image. Since the game should be "save" for children to use, the default user has no sudo permission and is not allowed to update install and do other root stuff.
You have to login as "root" to do so. For this, simply open a Terminal and type
Ok cool security fonction I did it and everything is fine now (except reicast :D) , but I don't understand why errors appears , I have memory to do update without this "su -" but perhaps i confuse with another distro.
Thanks for all.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Thu Mar 03, 2016 8:30 pm

Ah, I forgot : GBA games are little laggy and sound crackle, any solution ? : some settings to modify ? (I tried in retropie without succes) or change and install new core manually ? (cause on my Pi with another distro, it's perfect so I ask)
OH OH OH Droïdo !!!

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Thu Mar 03, 2016 10:57 pm

kolkovrok wrote:this file path doesn't exist in my image, the only "reicast" folder for me is in /usr/local/share (and I don't have the"."), I tried to put the bios in for see but permission denied; inside there is only a folder "mappings".
Don't put files under /usr/local/reicast, that are the program files the user files are under your home folder.
There are a few reasons
first of all: .reicast is a hidden folder, that's why it has a leading "." (point) you should use "mc" a file manager for terminal to see if it really does not exist. (which should not be the case since it should be included in the C1 image).
If the .reicast folder does really not exist, there should be other folder under .config/reicast and .local/share/reicast both in the home folder as well (and .config and .local are hidden folders).
There you could place the BIOS as well.. I think under .local/share/reicast/data, but I would advice to use the .reicast folder in your home folder.
kolkovrok wrote:Everything is ok after the update, I have now scumm in the menu, perfect !
That's good to know :)
kolkovrok wrote:I did it and everything is fine now (except reicast :D) , but I don't understand why errors appears , I have memory to do update without this "su -" but perhaps i confuse with another distro.
Thanks for all.
You can always try to start reicast directly from terminal, that should be more verbose and tell you what could be the issue.
kolkovrok wrote:Ah, I forgot : GBA games are little laggy and sound crackle, any solution ? : some settings to modify ? (I tried in retropie without succes) or change and install new core manually ? (cause on my Pi with another distro, it's perfect so I ask)
OH OH OH Droïdo !!!
Yeah, I think that's cause the C1 is too slow. There are different cores for different emulators. I think for GBA alone there are 4 or 5 different cores that you can use to play GBA games.
I chose "meteor" as a core, since the sound was very improved in that version and sounds "better" than the original beeping sounds of the GBA. But it seems the C1 is too slow for it. The other ODROIDs can handle it easily.
Anyway. You could use one of the other cores to "fix" this.
Install the retroarch-cores-bad package:

Code: Select all

su -
apt-get install retroarch-cores-bad
This will download even more libretro cores for retroarch and will store them under /usr/local/share/retraorch/cores/bad/.
There are different gba cores that you can use as an alternative.
gpsp_libretro.so is a GBA core ported from PSP and should be rather fast
mgba_libretro.so, vba_next_libretro and vbam_libretro should work as well and should also be faster than meteor.
So I would suggest use one of these cores and overwrite the meteor core. For example:

Code: Select all

su -
cp /usr/local/share/retraorch/cores/bad/gpsp_libretro.so /usr/local/share/retraorch/cores/good/meteor_libretro.so
or copy it over (without overwriting the original core) and change the used core in /usr/local/bin/gba-xbmc.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Fri Mar 04, 2016 1:25 am

first of all: .reicast is a hidden folder, that's why it has a leading "." (point) you should use "mc" a file manager for terminal to see if it really does not exist.
Sorry man ! I suspected this but usually under other distro/desktop I use, I make a right click to show/hide hidden files, I'm not Stephen Gary Wozniak, just a guy who loves computer, so I apologize and I want to say It's a pleasure to learn everyday from you, you're a patient & good teacher.
I'm going to drink a beer now, and after I'll do everything you said and I'll report tonight or tomorrow.

Now I want to make just a Feedback cause It's not a problem since I have two cards and I save everychange :
Something strange happened today : I made the updates that you tell this morning, and on one card, it's perfect like I said, and on the other I lose Pulse audio I think : no sound ! : when I click on the volume control (upper right) or mate volume control, it report to me problems ("no gstreamer plug in, blah blah, install blah blah" something like this), so I tried to go in the package installer to install the the thing but It say to me : "you need pulse audio X11, etc.., another thing (I don't remember) is broken, blah blah."
So I don't know what is this, cause I did exactly the same thing on the two cards and I report; if you find interest in this for your work, I could post screen capture of the error next time.
Keep in touch.

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Fri Mar 04, 2016 2:14 am

It's always interesting to see what issues come up, and find a way to prevent or solve them. Even if it's just a rare thing. So feel free to post it and maybe we can investigate it together.
It's always a chance to learn something new :)
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Fri Mar 04, 2016 4:16 am


User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Fri Mar 04, 2016 5:34 am

Hmm that all looks a little odd.
Are you logging in as "root" or as "odroid"?

The picture with the "depends" looks a little strange.
It says it wants to install libpulse0 (a library needed for pulseaudio) that exists in two version 5.0 (which is from Debian Jessie) and 7.1 (from Jessie backports). While pulseaudio requires libpulse in version 5.0 for some reason version 7.1 is marked for being installed.
You probably have a mixed environment for that.
What you could try is the following:

Code: Select all

su -
apt-get install -t jessie-backports pulseaudio
this will install version 7.1 from pulseaudio. which should work fine (and is actually newer than the standard pulseaudio from default Debian Jessie).
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Fri Mar 04, 2016 5:37 am

Reicast is OK, now ! :D thanks; but my controler (shanwan PS3) is not OK :( , so I dug and searched on the forum, I found some topics but it's seem complicated for me, I don't understand all tips (like chinese)...
I found too the first page of gamestation turbo for XU3/XU4 when You say :
Dreamcast support:
You can now play dreamcast games with this image as well with up to 4 players.
In order to do so you need to place the BIOS files for Dreamcast (dc_boot.bin and dc_flash.bin) in the /home/odroid/.reicast/data folder.
You might also have to start the emulator without a game once to "format" VMUs in order to save your games.
In /home/odroid/.reicast/emu.cfg you'll find the configuration of reicast emulator. This normally should be fine and does not need to be touch.
In some cases you might want to change the evdev_device_id_X = Y configurations. These configuration options define which device under /dev/input/ should be used for Joystick/Gamepad support.
evdev_device_id_1 = 3 would mean, for the first Dreamcast gamepad the device 3 should be used, which would be /dev/input/event3.
So I think you must put the same intro (more complete) on the first page of this thread for gamestation turbo C1, it will be helpful (for the bios, etc), you'll have less questions from people like me in the future; it's just a suggestion.

I thinked to edit emu.cfg with something like this : https://github.com/RetroPie/RetroPie-Se ... /Dreamcast but I prefer wait your advice.
When you'll have time it will be appreciated to explain the way for reicast control configuration cause I abandon for tonight, I'll retry tomorrow with fresh head.

For now I'm going to try GBA, it will be more simple before sleeping.

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Fri Mar 04, 2016 8:30 am

yeah, with the C1 I normally just reffer to the other topics such as the XU3 or U2 forum, which have more detailed explainations.
The C1 is a rather buggy board, lots of issues, slow CPU, less RAM than most of the other ODROIDs.
Generally I'm not too fond of the C1, since it has so many issues. Still I'm thinking about making a manual for this image and put more detailed information in that and make this manual available instead.
Should be better, since this could be interactive with links to click at :)

But as usual time is short so I'll have to see when I can pull this.

The Joystick configuration for the PS3 controller on the retropie site looks interesting. I'll test if it works. I have a PS3 controller as well, so that's a good way to test it.
BTW. XBox 360 controllers are normally better supported than PS3 controllers (although PS3 has the better quality controllers I think). Also with a XBox 360 wireless PC adapter you can connect 4 controllers at the same time, while for PS3 you only can connect one PS3 controller over Bluetooth. (or one for each USB port you have to spare).
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Fri Mar 04, 2016 7:48 pm

It says it wants to install libpulse0 (a library needed for pulseaudio) that exists in two version 5.0 (which is from Debian Jessie) and 7.1 (from Jessie backports). While pulseaudio requires libpulse in version 5.0 for some reason version 7.1 is marked for being installed.
You probably have a mixed environment for that.
What you could try is the following:

Code: Select all
su -
apt-get install -t jessie-backports pulseaudio
Sound problem solved ! congratulations.
So I would suggest use one of these cores and overwrite the meteor core. For example:

Code: Select all
su -
cp /usr/local/share/retraorch/cores/bad/gpsp_libretro.so /usr/local/share/retraorch/cores/good/meteor_libretro.so


or copy it over (without overwriting the original core) and change the used core in /usr/local/bin/gba-xbmc.
terminal said me "no such file or directory ", but the file exist, I see it and If I want to it manually, I can't cause about the permissions.
I think I find some solutions on the web with "chmod" (I did that before) but perhaps there is another way more secure and simple ?
Thx.
Mister Questions.

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Fri Mar 04, 2016 9:28 pm

kolkovrok wrote:terminal said me "no such file or directory ", but the file exist, I see it and If I want to it manually, I can't cause about the permissions.
I think I find some solutions on the web with "chmod" (I did that before) but perhaps there is another way more secure and simple ?
Thx.
Mister Questions.
First question: did you install the retroarch-cores-bad package?
If so you should be able to use "mc" to copy the files
just open a terminal and try the following:

Code: Select all

# become root
su -
# change into the folder where the cores are:
cd /usr/local/share/retroarch/cores
# start mc and copy files with that
mc
in mc you open on one side the bad folder and on the other the good folder (you can switch left and right by using mouse or pressing the "TAB" key).
Copy the file over by using F5, either rename it directly when you copy it or later after it's copied on the other side.

That should work :)
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Fri Mar 04, 2016 11:43 pm

Yes I installed the "bad" packages, I could see all in the folder, I was root too but it didn't want to do the terminal task (I verify three times the name, the spell, the way, etc.)
I'm not at home until monday, so I'll try the new technique as soon as possible.
Have a good week end.

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Mon Mar 07, 2016 12:35 am

Update:
I've updated the base image on the first post to a more current version, only minor changes:
  • updated all packages to their latest versions
  • removed scummvm-odroid package in favor of scummvm package with OpenGL (ES) support
  • added my fix for some SD cards, that were previously not working (same that I use for my Debian Jessie image)
  • added a fix for cursor on VT
  • did some cleanup work
The update is mainly to support more SD cards as well as bringing the packages on the image to a newer version (including some security patches).
If you are already running this image there is no need to download the new one, it's only for new users.

Edit:
@kolkovrok
I've just updated my reicast package. It now includes a mapping file for PS3 controller :)
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Mon Mar 14, 2016 6:23 pm

Hello, I was away for a week, I'm back with my questions now ;)
As you remember I use two cards, like that I can modify/make updates without touch the other and only modify it when changes are safe for my system (C1+, Lcd 800*600 hdmi, Hdmi to Hdmi & audio converter).
The last update was a disaster for me :
- I lose all graphics in emulationsation (only white and blue with a simple font) and when I launch a game (every cores): blackscreen, only sound.
-If I launch a game on the dreamcast I have only the startup menu but I can't have a game ("please insert a disk"), so I couldn't try my gamepad.(Before when I did that I had the game directly)
-Sometimes when I quit kodi I have blackscreen and my desktop won't come back.
So I decided to make a fresh install and it's the same...
Happily I had my second cards and I changed the GBA core succesfuly with MC as you explained to me, It's better with gpsp but it don't work from emulationstation, I must launch it by retroarch.I suppose it's because I didn't change the used core in /usr/local/bin/gba-xbmc. (but I can't edit the file cause permission).
Finaly I keep my old good working version and I stop the update on it otherwise I will lose all...But it's not a problem, it's cool for me like that; the only problem on it I would like to solve is the dreamcast controler : I've tried to change device ID, I've tried too copying the mappings from the new image, etc. : no way !
Another thing : did you try gamestationturbo on the C2 ? about alpha problem ppsspp and performance of other cores ? I think I'll buy one quickly and I would like to know your first impressions; thank you.

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Mon Mar 14, 2016 10:44 pm

kolkovrok wrote:Hello, I was away for a week, I'm back with my questions now ;)
As you remember I use two cards, like that I can modify/make updates without touch the other and only modify it when changes are safe for my system (C1+, Lcd 800*600 hdmi, Hdmi to Hdmi & audio converter).
The last update was a disaster for me :
- I lose all graphics in emulationsation (only white and blue with a simple font) and when I launch a game (every cores): blackscreen, only sound.
Yes, it seems the latest Kernel update to activate correct cursor behaviour on VT made a big impact on X11 and it can't show anything now.
I'm currently trying to verify that's really the cause and if it's done I will push a Kernel update that should fix that.
Sorry for this: if you want to help you can try to install: http://oph.mdrjr.net/meveric/kernel/C1/ ... _armhf.deb and see if that fixes it for you :)
kolkovrok wrote: -If I launch a game on the dreamcast I have only the startup menu but I can't have a game ("please insert a disk"), so I couldn't try my gamepad.(Before when I did that I had the game directly)
You should be able to try the controller even if you are in BIOS mode of the Dreamcast. Navigating in there (setting clock etc.) should work with PS3 controller as well.
In fact, the new SixAxis drivers are very good and do autopairing and other nice features.
kolkovrok wrote: -Sometimes when I quit kodi I have blackscreen and my desktop won't come back.
So I decided to make a fresh install and it's the same...
That's related to the Kernel update.. Either wait for update or try the one I pointed up above. Sorry for that :(
kolkovrok wrote:Happily I had my second cards and I changed the GBA core succesfuly with MC as you explained to me, It's better with gpsp but it don't work from emulationstation, I must launch it by retroarch.I suppose it's because I didn't change the used core in /usr/local/bin/gba-xbmc. (but I can't edit the file cause permission).
Yep, the C1 is too slow for meteor it seems, which is a shame, cause the sound on meteor is so much better than on the other cores for GBA.
Lately I've done a lot of scripting, maybe I'll update the cores and starters again, checking on what system you're running, and I'll switch to the faster, but less capable cores for the C1 due to the lack of CPU power.
kolkovrok wrote: Finaly I keep my old good working version and I stop the update on it otherwise I will lose all...But it's not a problem, it's cool for me like that; the only problem on it I would like to solve is the dreamcast controler : I've tried to change device ID, I've tried too copying the mappings from the new image, etc. : no way !
On the old "working" image you can update a single package like this:

Code: Select all

apt-get update
apt-get install reicast-odroid
that way you only update that single package and not all packages that are available.
The new reicast mapping is done by both a new mappings file and inside the emulator itself. I made a new switch that is checking if the controller has the PLAYSTATION(R)3 tag in it and if so it should load the mapping file.
With out this you have to manually tell the emulator to use that mapping file.
kolkovrok wrote: Another thing : did you try gamestationturbo on the C2 ?
There is no "trying" ;)
I have to create a new one for this since it's an entire different architecture. I already have EmulationStation, Kodi, retroarch and many cores for the C2 ready, but not everything will work. The 64bit architecture is not yet supported and all emulators that require ASM optimization won't work on the C2 at the moment (at least not on 64bit images).
kolkovrok wrote:about alpha problem ppsspp and performance of other cores ? I think I'll buy one quickly and I would like to know your first impressions; thank you.
Alpha Issue still exists on the C2 there's just a dirty workaround for it, that changes some coloring values for Desktop. It's hard to tell what programs are affected by this. Kodi for example is affected and you need to revert the Alpha hack to get Kodi to work in 32bit. Other applications are probably affected as well.
Right now PPSSPP is NOT working on the C2, and it probably gonna take a while until it is supported, so I can't say if the alpha issue is still present for PPSSPP on the C2.

Generally the C2 is a lot of trouble in the moment. Many dirty hacks und issues left and right, especially with sound and graphics at the moment. Also the lacking support of 64bit in many projects is a show stopper.
No N64, no PSP, no NDS and several more, not even PS1 is working with optimization which makes is extremely slow on the C2. If you want a stable board for playing games, the C2 is really not your choice at the moment. Although the performance itself seems promising. The C2 is probably as fast as a U3 at the moment, which is quite nice. Not as good as a XU4, but not bad.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

kolkovrok
Posts: 42
Joined: Wed Dec 16, 2015 5:00 pm
languages_spoken: French, English
ODROIDs: Odroid C1+
Location: South of France
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by kolkovrok » Tue Mar 15, 2016 5:25 am

OK
Sorry for this: if you want to help you can try to install: http://oph.mdrjr.net/meveric/kernel/C1/ ... _armhf.deb and see if that fixes it for you :)
It's fixed, I have now acces to the games normally on the new card, Kodi is fine, but I continue with the older too cause it is a little bit different with my personal changes and on the new one I havn't change GBA core yet and I havn't graphics in emulationstation, so I keep an eye on the new, I'll made my modifications soon and I can wait to your definitive version.
Lately I've done a lot of scripting, maybe I'll update the cores and starters again, checking on what system you're running, and I'll switch to the faster, but less capable cores for the C1 due to the lack of CPU power.
At this time I only test gpsp, it's more pleasant than meteor; I'll try mgba_libretro.so, vba_next_libretro and vbam_libretro in the next days and I'll report to you which is the best (for me).
Speaking of starters I forgot to say for feedback (cause it was not a big problem) that the gameboy and neogeo pocket don't appears in emulationstation : I use retroarch menu to play to this games.
Another problem for me (more important) is for the PC engine CD : I can't play, they are not in emulationstation, I have the good bios (cause I used it on my pi) and testing two games (Akumajou dracula and Kaizou Choujin), Ive tried the two folders (PCE and Supergrafx) even using retroarch menu, without succes (about this I don't understand why there is two folders cause it the same machine, it's not a critic, just :?: ), so if you have a secret solution, I'll take.

For the Reicast controler, I follow the new instructions and others you gave here : http://forum.odroid.com/viewtopic.php?f=91&t=9700; and it still not working, I think it's because it's a Shanwan copy :
I made a new switch that is checking if the controller has the PLAYSTATION(R)3 tag in it and if so it should load the mapping file.
, so... I'll try to make a test with a friend's original PS3 or XBOX controler (&360, wired and wireless) when it'll be possible.
Thanks for your answer about the C2, I will wait a little before buying it, I was hesitant for a Pi3 too (but Ive heard/read problem of hot temperature with gaming) so I'll folow your advice and try the XU4 soon.
My project is being finalized now (it will be better with reicast), so I would like to thank you for your work, your time and availability, I'm happy and I'll send you a link if you are interested ,in one or two days.
:D :mrgreen: :lol: :P :roll:

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Tue Mar 15, 2016 4:58 pm

kolkovrok wrote:At this time I only test gpsp, it's more pleasant than meteor; I'll try mgba_libretro.so, vba_next_libretro and vbam_libretro in the next days and I'll report to you which is the best (for me).
Thanks for all the testing, that is really very helpful :)
kolkovrok wrote:Speaking of starters I forgot to say for feedback (cause it was not a big problem) that the gameboy and neogeo pocket don't appears in emulationstation : I use retroarch menu to play to this games.
What extensions do the games have? There are only a few supported file extensions the system searches for to determine if these games are gameboy or neogeo pocket games :)
kolkovrok wrote:Another problem for me (more important) is for the PC engine CD : I can't play, they are not in emulationstation, I have the good bios (cause I used it on my pi) and testing two games (Akumajou dracula and Kaizou Choujin)
I've just tried Kaizou Choujin and it was working fine It shows up as "TurboGrafx16" in EmulationStation.
Once again, make sure you have the supported file extension .cue, .ccd, .pce.
kolkovrok wrote:Ive tried the two folders (PCE and Supergrafx) even using retroarch menu, without succes (about this I don't understand why there is two folders cause it the same machine, it's not a critic, just :?: ), so if you have a secret solution, I'll take.
It should work from the PCE folder. Why are there two, well for once cause there are two cores: PCE_FAST and supergrafx.
The first is said to be for PC-Engine CD / TurboGrafx 16 the later for SuperGrafx (and does not support CDs). These are two different systems, although I asume they are pretty close to each other.
kolkovrok wrote: For the Reicast controler, I follow the new instructions and others you gave here : http://forum.odroid.com/viewtopic.php?f=91&t=9700; and it still not working, I think it's because it's a Shanwan copy :
You should still be able to use the mappings file I guess. Although I'm not 100% sure about the copied controllers.
kolkovrok wrote:so... I'll try to make a test with a friend's original PS3 or XBOX controler (&360, wired and wireless) when it'll be possible.
XBox360 has the best support it seems, although the controller quality of PS3 seems to be better.
kolkovrok wrote:My project is being finalized now (it will be better with reicast), so I would like to thank you for your work, your time and availability, I'm happy and I'll send you a link if you are interested ,in one or two days.
:D :mrgreen: :lol: :P :roll:
Sure I'm always interested to see what others come up with :)

Thanks again for all the feedback, it's very helptful.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

Floppie
Posts: 22
Joined: Sat Jan 31, 2015 5:18 am
languages_spoken: english
ODROIDs: C1
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by Floppie » Wed Mar 16, 2016 5:11 am

I'm currently running this build (fully updated through apt with Kodi 16.0, although had same results on 15.2) and getting weird Kodi crashes when I plug in a PS3 controller (or on startup, if I already have it plugged in). Nothing useful from debug logs, other than the 2nd to last statement is 'found Sony PS3 controller' (paraphrased). I'm working on an strace now.

Other than that, this is flawless. With keyboard control I'm running PleXBMC and quite happy with it ;)

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Wed Mar 16, 2016 6:39 am

I just tried it myself and you're right, if you connect PS3 controller via USB Kodi will alway crash.

I tried connecting PS3 controller via bluetooth instead, this doesn't crash Kodi and the controller is correctly found.

But the menu is permanently scrolling, I guess some options need to be adjust, so only the dpad keys are used in menu for Kodi.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

Floppie
Posts: 22
Joined: Sat Jan 31, 2015 5:18 am
languages_spoken: english
ODROIDs: C1
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by Floppie » Sat Mar 19, 2016 2:24 am

Interesting. Well, at least it isn't one of those "this only happens on my system" problems like I expected it to be haha.

Where does the code live for your ODROID Kodi builds? When I have some downtime I'll try to do some troubleshooting. (I also wouldn't mind building it for the XU I've got.) I don't have a Bluetooth dongle so fixing this over USB is something I'm interested in doing on my downtime ;)

User avatar
meveric
Posts: 10389
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2
Has thanked: 15 times
Been thanked: 117 times
Contact:

Re: [OS] ODROID GameStation Turbo with Kodi for C1

Unread post by meveric » Sat Mar 19, 2016 8:04 am

Search for Oversuns repository. That what my builds are based on :)
I think on github you find him under "Owersun"
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

Post Reply

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 1 guest