Power supply via PoE ?

Moderators: odroid, mdrjr

Power supply via PoE ?

Unread postby supermario333333 » Fri Dec 12, 2014 11:45 pm

Hi @all,

is it planned or currently possible to power the board directly via PoE ?

Thanks
Mario
supermario333333
 
Posts: 8
Joined: Fri Dec 12, 2014 11:07 pm
languages_spoken: german
ODROIDs: C1

Re: Power supply via PoE ?

Unread postby mdrjr » Sat Dec 13, 2014 1:05 am

No, there's no support for PoE.
mdrjr
Site Admin
 
Posts: 11695
Joined: Fri Feb 22, 2013 11:34 pm
Location: Brazil
languages_spoken: english, portuguese
ODROIDs: -

Re: Power supply via PoE ?

Unread postby venkatbo » Sat Dec 13, 2014 1:36 am

Careful use of this cable set may be an option:
http://www.adafruit.com/products/435?gc ... AuQE8P8HAQ
User avatar
venkatbo
 
Posts: 472
Joined: Mon Feb 25, 2013 3:10 pm
Location: Bay Area, California
languages_spoken: english
ODROIDs: C0/C1+/C2 U3+ XU3-Lite/XU4 VU/VU7+ Touchscreen Show TFT Cloudshell SmartPower mAHRS DAC GPS Multiscope

Re: Power supply via PoE ?

Unread postby odroid » Sat Dec 13, 2014 9:16 pm

venkatbo wrote:Careful use of this cable set may be an option:
http://www.adafruit.com/products/435?gc ... AuQE8P8HAQ


It seems not to be compatible with the Gbit Ethernet. :(
User avatar
odroid
Site Admin
 
Posts: 29121
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: Power supply via PoE ?

Unread postby supermario333333 » Mon Dec 15, 2014 4:44 pm

Currently I use for my RASPi this Splitter but I think I can take it also for the C1 (incl. Gigabit network)

http://www.trendnet.com/products/prodde ... _TPE-114GS

Basically I search for a board where I can put the PoE cable direct in - without splitter etc.

cheers
Mario
supermario333333
 
Posts: 8
Joined: Fri Dec 12, 2014 11:07 pm
languages_spoken: german
ODROIDs: C1

Re: Power supply via PoE ?

Unread postby rosbeef » Thu May 10, 2018 3:38 am

Rasperry pi b+ consume upt to 3W-600mA [url]https://fr.wikipedia.org/wiki/Raspberry_Pi#Modèle_3B+_(Raspberry_Pi_3)
[/url] then it's compatible with POE

Odroid hc1 at least 4W up to 14W for 5V. I result in intensity up to 2,8 A. which is not alowded by the POE standard https://en.wikipedia.org/wiki/Power_over_Ethernet

Warning ethernet cable should not support this intensity. :oops:
rosbeef
 
Posts: 2
Joined: Mon Nov 06, 2017 2:29 am
languages_spoken: francais, english, español

Re: Power supply via PoE ?

Unread postby rosbeef » Thu May 10, 2018 3:41 am

rosbeef
 
Posts: 2
Joined: Mon Nov 06, 2017 2:29 am
languages_spoken: francais, english, español

Re: Power supply via PoE ?

Unread postby midnite » Wed Sep 05, 2018 7:20 pm

rosbeef, you are mistaken, 4w is nothing for poe. The amps limiting is for the ethernet cable, not for the device 5v power, that's why the poe voltage is normally at least 24v to minimize the amps in the network cable.
odroid can with no problem be powered by poe and a splitter cable.
/Midnite


rosbeef wrote:Rasperry pi b+ consume upt to 3W-600mA [url]https://fr.wikipedia.org/wiki/Raspberry_Pi#Modèle_3B+_(Raspberry_Pi_3)
[/url] then it's compatible with POE

Odroid hc1 at least 4W up to 14W for 5V. I result in intensity up to 2,8 A. which is not alowded by the POE standard https://en.wikipedia.org/wiki/Power_over_Ethernet

Warning ethernet cable should not support this intensity. :oops:
midnite
 
Posts: 1
Joined: Wed Sep 05, 2018 7:15 pm
languages_spoken: english


Return to Hardware and peripherals

Who is online

Users browsing this forum: Google [Bot] and 2 guests