e-ink display

Post Reply
tamatura
Posts: 9
Joined: Mon Feb 22, 2016 6:07 pm
languages_spoken: english
Contact:

e-ink display

Unread post by tamatura » Sat Mar 26, 2016 4:25 am

Any e-ink displays available for the C0 specifically? I did not see any in the list. Looking for a 2.7" e-ink display on the C0.
Or any third party e-ink displays compatible with C0?

User avatar
odroid
Site Admin
Posts: 29981
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: e-ink display

Unread post by odroid » Sat Mar 26, 2016 3:03 pm

SPI interface compatible e-ink display should work. But we didn't try it.

tamatura
Posts: 9
Joined: Mon Feb 22, 2016 6:07 pm
languages_spoken: english
Contact:

Re: e-ink display

Unread post by tamatura » Sun Mar 27, 2016 11:44 am

Oh thats great. So do you see this working with the C0: http://www.embeddedartists.com/products ... epaper.php

User avatar
odroid
Site Admin
Posts: 29981
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: e-ink display

Unread post by odroid » Sun Mar 27, 2016 5:35 pm

It seems to be possible if their software accesses the /dev/spidev*.* like this example on C1+/C0.
http://odroid.com/dokuwiki/doku.php?id=en:c1_dotmatrix

tamatura
Posts: 9
Joined: Mon Feb 22, 2016 6:07 pm
languages_spoken: english
Contact:

Re: e-ink display

Unread post by tamatura » Mon Mar 28, 2016 1:36 am

Ok. It may just work. But I have sent an email to embedded artists to to verify.

gtj
Posts: 27
Joined: Thu Jun 02, 2016 4:21 am
languages_spoken: english
ODROIDs: XU4
Contact:

Re: e-ink display

Unread post by gtj » Sat Nov 11, 2017 11:25 pm

Are there any news on this?
I'd like to built a weather display based on my C2

Ronaldleess
Posts: 59
Joined: Wed May 24, 2017 6:52 am
languages_spoken: english
ODROIDs: XU4 C1 C1+
Contact:

Re: e-ink display

Unread post by Ronaldleess » Sat Nov 25, 2017 1:31 am

gtj wrote:Are there any news on this?
I'd like to built a weather display based on my C2
Yes, I've been thinking about an eInk display, but 2.75 inches is too small for me. I wonder what the likelihood is that the following displays (especially the 7 inch) could work on any of the Odroid boards:

https://www.waveshare.com/product/mini- ... splays.htm
I am The Umbrella Man

Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 1 guest