Fedora image for C1?

ashish_nagarudr
Posts: 1
Joined: Fri Jan 02, 2015 3:51 pm
languages_spoken: english
ODROIDs: C1
Contact:

Fedora image for C1?

Unread post by ashish_nagarudr » Fri Jan 02, 2015 3:56 pm

Hi,

I would like to run Fedora 20 or 21 on C1 board. Can anyone help me point to a instructions on how to build Fedroa image from scratch so that I can replace Ubuntu with Fedora 20/21.

Any pointer will be greatly appreciated.

Thanks

Ashish

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sun Jan 11, 2015 8:40 am

I'd also be interested.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Fri Jan 23, 2015 10:19 am

Making some progress... Ignore the "Connected: RaspberryPi"; I'm using a Bluetooth console, and that's what I named it. The Fedora 21 minimal rootfs boots up using the odroid-c1 kernel. Some work yet to do; once I'm done, I'll post the img file - unless someone beats me to it.

Image

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Fri Jan 23, 2015 11:06 pm

The image is ready, download here.

Fedora 21 ODROID-C1 Headless Server Image

The image can be dd copied to an 8GB or larger SD card:

xz -d fedora21-odroidc1-20150123.img.xz
dd if=fedora21-odroidc1-20150123.img of=/dev/sdX

- Rootfs is based on Fedora-Minimal-armhfp-21-5
- Based on ODROID-C1 3.10.64 kernel
- Tuning in /etc/rc.d/rc.local
- Upstream 3.10.65 kernel patch applied
- RTL8192du dual-band WiFi support added
- All outstanding Fedora maintenance applied
- Added packages:
wget, git, linux_logo, gcc, which, strace, dd_rescue
- Ssh enabled, root login only, password odroid
- Selinux in permissive mode
- Fedora kernel updates excluded in:
/etc/yum.conf
/etc/dnf/dnf,conf
- WiringPi installed from Hardkernel
(source on root login)
- Added executables are in /usr/local/bin
- Rootfs uses 1.1GB

Recommendations:

- ssh-copy-id root@xxx.xxx.xxx.xxx to set key login
- In /etc/ssh/sshd_config:
PermitEmptyPasswords no
PasswordAuthentication no
PubkeyAuthentication yes
- Enable selinux: in /etc/selinux/config:
SELINUX=enforcing

If you have any feedback or suggestions, let me know.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sat Jan 24, 2015 8:04 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:04 pm, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sat Jan 24, 2015 8:21 am

Yes, you can add a desktop, for example:

Code: Select all

# yum groupinstall "Xfce Desktop"
I'm using exactly that with VNC:

Code: Select all

# yum install tigervnc-server
SELinux enforcing is a recommendation, but you can certainly leave it in permissive or even disable it if you choose. Also the rootfs is mounted read-only by default. Fedora runs fine that way, and the flash doesn't get any wear. But if you are going to be installing software or using it via VNC, you probably want to change /media/boot/boot.ini:

setenv bootargs "root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait rw console=ttyS2,115200n8 no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=${m} m_bpp=${m_bpp} vout=${vout_mode} ${disableuhs}

The only advantage that the Raspberry Pi has is that I can run the current stable kernel (currently 3.18.3). They post the Raspberry Pi kernel literally within hours of release on kernel.org. That provides a lot of new functionality that the C1 unfortunately doesn't have access to with the long-term support kernel. I'm not even sure what will happen when the 3.10 kernel is end-of-life'd in September.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sat Jan 24, 2015 8:50 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:05 pm, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sat Jan 24, 2015 8:58 am

It's configured as a headless server, so I have the video modules removed in /media/boot/boot.ini to free up the RAM. I haven't done any testing with the HDMI, or installed any userspace that it may require. The only local console I use is a Bluetooth serial adapter on the 40-pin header (/dev/ttyS2).

maskimko
Posts: 1
Joined: Sat Jan 24, 2015 8:29 am
languages_spoken: english ukrainian
ODROIDs: c1
Contact:

Re: Fedora image for C1?

Unread post by maskimko » Sat Jan 24, 2015 9:27 am

Cool! For me it really works! Only 150M of RAM is user. Thank you very much for the image!

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sat Jan 24, 2015 9:29 am

You're welcome! :)

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sat Jan 24, 2015 9:50 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:05 pm, edited 1 time in total.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sat Jan 24, 2015 10:03 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:06 pm, edited 1 time in total.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sat Jan 24, 2015 10:06 am

...
Last edited by vk4tux on Sun Jan 25, 2015 7:25 am, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sat Jan 24, 2015 10:07 am

vk4tux wrote: Mace can you give me a procedure to re add those video modules, or was that covered in the bootargs you gave before ?

I need it to graphical boot direct. The ttyS2 uart port on this is very good we have used it with GPIO devices here.
I used the ttyS0 console socket for that, I guess you don't have that plug :) I bought the HK usb serial console cable for the U3 and
its good for the C1 also. Mace get a U3 its amazing.

regards

Adrian
In /media/boot/boot.ini, just remove or comment out these entries:

Code: Select all

fdt rm /mesonfb
fdt rm /mesonstream
fdt rm /vdec
fdt rm /ppmgr
However, as I said above, I haven't tested and the HDMI out and or X and or some other bit probably won't work. If you get it working let us know how.

The bluetooth serial adapter is one I bought for the Raspberry Pi, and it uses the pin connectors. Pretty much everything with a serial port has a connector that is compatible. I connect to that with BlueTerm on my Android phone. So using ttyS2 is really the easiest option for me.

Image

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sat Jan 24, 2015 10:09 am

vk4tux wrote:This issue ;

root@localhost:/media/boot# yum install nano
Cannot open logfile /var/log/yum.log


One of the configured repositories failed (Fedora 21 - armhfp),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
You can't install software with the rootfs mounted read-only. Read the earlier post with the highlighted red change required.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sat Jan 24, 2015 10:12 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:07 pm, edited 5 times in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sat Jan 24, 2015 10:16 am

No need to mount on a PC; /media/boot is a separate read-write partition (as it is on the Ubuntu image), so you can just change it and reboot. Or:

Code: Select all

# mount / -o remount,rw

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sat Jan 24, 2015 10:21 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:08 pm, edited 1 time in total.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 6:38 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:09 pm, edited 1 time in total.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 8:02 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:11 pm, edited 2 times in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sun Jan 25, 2015 8:28 am

vk4tux wrote:Mace how can I disable above please ? I looked in .bashrc, nothing seen there ?
That's linux_logo. In /etc/rc.d/rc.local you'll see the logo setup. Just comment that out and set whatever you want for /etc/issue, /etc/issue.net, and /etc/motd.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 8:30 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:11 pm, edited 3 times in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sun Jan 25, 2015 8:31 am

vk4tux wrote:default KDE boot on HDMI with above boot ini shown below as it boots up ;
looking good Mace, how can I get rid of the prompt penguin ? Getting sick of that .

thankyou

Adrian ... vk4tux
Excellent!

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 8:40 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:12 pm, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sun Jan 25, 2015 8:59 am

I use both wireless and wired, DHCP (pseudo-static DHCP reserve via dd-wrt dnsmasq) and static tested.

Code: Select all

Jan 24 18:59:40 morbius dhclient[6922]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 (xid=0x23f3dbe2)
Jan 24 18:59:40 morbius dhclient[6922]: DHCPREQUEST on eth0 to 255.255.255.255 port 67 (xid=0x23f3dbe2)
Jan 24 18:59:40 morbius dhclient[6922]: DHCPOFFER from 135.82.8.1
Jan 24 18:59:40 morbius dhclient[6922]: DHCPACK from 135.82.8.1 (xid=0x23f3dbe2)
Jan 24 18:59:40 morbius dhclient[6922]: bound to 135.82.8.5 -- renewal in 36969 seconds.
Jan 24 18:59:40 morbius nm-dispatcher: Dispatching action 'up' for eth0
It seems to be working fine (my dynamic addressing range is 135.82.8.200-220). It correctly got the '.5' address on the reservation.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 9:53 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:12 pm, edited 1 time in total.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 11:16 am

... Oxygen and reverse zion is pretty cool.
Last edited by vk4tux on Sun Jan 25, 2015 11:54 am, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sun Jan 25, 2015 11:26 am

I wasn't able to get a reply to connection attempt. How is the local responsiveness using KDE? I use a KDE desktop myself, and my home is on an NFS server. That would let me use the C1 as a 'backup' when the desktop is down for work.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 11:35 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:12 pm, edited 1 time in total.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 2:08 pm

...
Last edited by vk4tux on Sun Feb 14, 2016 1:13 pm, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sun Jan 25, 2015 6:52 pm

macemoneta wrote:
vk4tux wrote:Mace how can I disable above please ? I looked in .bashrc, nothing seen there ?
That's linux_logo. In /etc/rc.d/rc.local you'll see the logo setup. Just comment that out and set whatever you want for /etc/issue, /etc/issue.net, and /etc/motd.
So to clear the contents of the three files, just:

echo -n > /etc/issue
echo -n > /etc/issue.net
echo -n > /etc/motd

If the entry in /etc/rc.d/rc.local is commented out, the files won't be changed on subsequent boots.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 7:23 pm

...
Last edited by vk4tux on Sun Feb 14, 2016 1:13 pm, edited 1 time in total.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 8:55 pm

...
Last edited by vk4tux on Sun Feb 14, 2016 1:14 pm, edited 2 times in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Sun Jan 25, 2015 9:02 pm

Looks great! Fedora tends to have newer packages than most distributions, so perhaps some bugs in the package were corrected upstream but not yet picked up by Ubuntu.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Sun Jan 25, 2015 11:40 pm

...
Last edited by vk4tux on Sun Feb 14, 2016 1:14 pm, edited 1 time in total.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Mon Jan 26, 2015 4:38 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:14 pm, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Mon Jan 26, 2015 4:57 am

There's a newer version on Koji that hasn't been pushed yet (php-5.6.5-1). You might want to give that a try:

Code: Select all

  http://koji.fedoraproject.org/koji/buildinfo?buildID=605771
I'm setting up an updated image now with the various feedback I've gotten. So far:
Image

Let me know if there's anything else you want changed. Should the HDMI video be enabled by default, or leave it as a headless server image?

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Mon Jan 26, 2015 5:18 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:15 pm, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Mon Jan 26, 2015 5:26 am

I can't really support you on Fedora problems, unless you think there's an issue with the packaging? You can search the kernel bug tracker for known issues:

Code: Select all

https://bugzilla.kernel.org/
If you find a match to your symptoms and there's a patch for a kernel after 3.10.65, I can see if I can get it to apply (though it's a longshot).

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Mon Jan 26, 2015 5:47 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:15 pm, edited 1 time in total.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Tue Jan 27, 2015 2:45 pm

...
Last edited by vk4tux on Sun Feb 14, 2016 1:16 pm, edited 2 times in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Tue Jan 27, 2015 7:28 pm

Sorry, I don't have an eMMC to test with. Worst case, you might have to loopback mount the second partition and shrink it a bit.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Wed Jan 28, 2015 12:39 pm

...
Last edited by vk4tux on Sun Feb 14, 2016 1:16 pm, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Wed Jan 28, 2015 12:42 pm

vk4tux wrote:It works fine on eMMC
Thanks for checking it out. :)

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Wed Feb 04, 2015 3:49 pm

...
Last edited by vk4tux on Sun Feb 14, 2016 1:16 pm, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Wed Feb 04, 2015 11:50 pm

You don't need anyone to package Fedora 21 for the Pi2; just use the Fedora 21 rootfs, and the current (as of today, 3.18.5, soon to be 3.19) kernel from github.

Edit: I've been building the Raspberry Pi kernels for easy installation for a while. You can get them here. I announce each build on Twitter (@macemoneta) and the major releases on G+ (Mace Moneta).

gavidia
Posts: 4
Joined: Wed Dec 31, 2014 9:29 am
languages_spoken: english
Contact:

Re: Fedora image for C1?

Unread post by gavidia » Thu Feb 05, 2015 3:49 am

Hi

where i can download the image for fedora 21 the link http://vk4tux.openquad.net/filzzz/tuxOD ... ix.img.zip is not working

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Thu Feb 05, 2015 4:43 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:17 pm, edited 1 time in total.

vk4tux
Posts: 210
Joined: Wed Sep 24, 2014 6:59 pm
languages_spoken: english
ODROIDs: none
Contact:

Re: Fedora image for C1?

Unread post by vk4tux » Thu Feb 05, 2015 4:59 am

...
Last edited by vk4tux on Sun Feb 14, 2016 1:17 pm, edited 1 time in total.

macemoneta
Posts: 62
Joined: Sun Jan 11, 2015 8:38 am
languages_spoken: english
ODROIDs: odroid-c1
Location: NJ
Contact:

Re: Fedora image for C1?

Unread post by macemoneta » Thu Feb 05, 2015 5:13 am

I don't yet have a Pi2, but here's how I would do it:

- Get and install the Pidora 2014 image (Fedora 20 Remix)
- Replace the rootfs (partition /dev/mmcblk0p2) with the Fedora 21 rootfs of your choice from the above link
- Boot to verify proper operation
- Upgrade to the latest kernel using the procedure on my Dropbox link above.

That should be all. You can install the vanilla wiringpi if you want from the Fedora repository, since it was written for the Pi.

Post Reply

Return to “Other OS”

Who is online

Users browsing this forum: No registered users and 1 guest