C1(+) LibreELEC 7.0.3 - Kodi Jarvis 16.1 / 24p+HEVC

danny_ice · Post by **danny_ice** » Wed Dec 23, 2015 3:07 am

hi all,

is there any way to make it turn off the tv via cec? like on the pi where it turns the tv off when acivating screensaver

Cheers
Dan

Deaddy · Post by **Deaddy** » Wed Dec 23, 2015 11:40 pm

Hello guys, I have a big problem!

I just bought a ODROID c1+ board, a micro-SDHC Sandisk Ultra UHS-I 16GB and this adapter Hama.

I tried "OpenELEC 6.0.3 - Kodi Isengard 15.2 Final" and "OpenELEC 6.95.4.0 - Kodi Jarvis 16.0 Beta4" but both, after the restart following the resizing of the file system, give me a lot of errors, always different. An example.
Unfortunately I get stuck in these screens and kodi doesn't start,I have no way to see any log.

I also tried Odrobian (downloaded from this forum) and boot with no apparent problems.

The Hama adapter can be the problem? Any advice is welcome, thank you!!

XeoSal · Post by **XeoSal** » Wed Dec 23, 2015 11:54 pm

Deaddy wrote:Hello guys, I have a big problem! I just bought a ODROID c1+ board, a micro-SDHC Sandisk Ultra UHS-I 16GB and this adapter Hama.

I tried "OpenELEC 6.0.3 - Kodi Isengard 15.2 Final" and "OpenELEC 6.95.4.0 - Kodi Jarvis 16.0 Beta4" but both, after the restart following the resizing of the file system, give me a lot of errors, always different. An example.
Unfortunately I get stuck in these screens and kodi don't start,I have no way to see any log.

I also tried Odrobian (downloaded from this forum) and boot with no apparent problems.

The Hama adapter can be the problem? Any advice is welcome, thank you!!

Your adapator has nothing to do with this, Odrobian has "disableuhs" option inside the "boot.ini" file commented, I am guessing that this openelec image has it uncommented, while you stated that your card does actually support "UHS" I would advise you to re-flash it again but uncomment the option that I told you about this time before putting the SD card into your ODROID C1 board and then boot up.

Deaddy · Post by **Deaddy** » Thu Dec 24, 2015 12:06 am

Fantastic, thank you so much, now it works!
Now I read everything in order to understand better how to use my Harmony that on a PC with Openlec worked without problems.

EDIT: ok found, with a Harmony Touch remote, configured as a MCE remote:

Code: Select all

cp /etc/lirc/lircd.conf.rpi /storage/.config/lircd.conf
reboot

and everything magically works

varma · Post by **varma** » Thu Dec 24, 2015 6:36 am

Is this product compatible with this Openelec distro?

http://it.aliexpress.com/item/Free-Ship ... eb201560_3

otherwise, does anybody know a board with analog AND optical output at a similar price?

Deaddy · Post by **Deaddy** » Thu Dec 24, 2015 7:42 am

I have a lot of freeze, I am forced to remove the power supply and brutally restart

It happens every time I browse through my collection of movies (500+ file) located on a Windows server, the system freezes and no longer responds.
Since I have not made any special configuration (Installed OpenELEC, configured lirc, connected shared folders, scraper scan and nothing else), it can be a hardware problem?
Where can I find any log to look what happens?

Sorry but I am a bit noob

rooted · Post by **rooted** » Fri Dec 25, 2015 5:46 pm

Deaddy wrote:I have a lot of freeze, I am forced to remove the power supply and brutally restart
It happens every time I browse through my collection of movies (500+ file) located on a Windows server, the system freezes and no longer responds.
Since I have not made any special configuration (Installed OpenELEC, configured lirc, connected shared folders, scraper scan and nothing else), it can be a hardware problem?
Where can I find any log to look what happens?

Sorry but I am a bit noob

Sounds like a power issue.

What type of power supply are you using?

nubleet · Post by **nubleet** » Fri Dec 25, 2015 10:07 pm

Having an issue on "OpenELEC (WRXTASY) - v.6.0.0". It looks like it may be due to poorly encoded rips. From what I have read, there is a way to disable the hardware decoder for only Xvid encodes. I have added this:

Code: Select all

  <video>
    <stagefright>
      <usemp4codec>0</usemp4codec>
    </stagefright>
  </video>

to my advancedsettings.xml as suggested for some FireTV users, but I don't believe that these releases have libstagefright installed?

Deaddy · Post by **Deaddy** » Sat Dec 26, 2015 12:49 am

rooted wrote: Sounds like a power issue.

What type of power supply are you using?

Original by Hardkernel

Same issue with Odrobian, freeze remaining on the desktop without starting a program. Removing the top of case the freeze disappear, but I have a lot of lag in the Kodi gui. Temperature problem?
But at this point maybe I should open a topic in the section "Issues"

noggin · Post by **noggin** » Sat Dec 26, 2015 9:41 pm

nubleet wrote:Having an issue on "OpenELEC (WRXTASY) - v.6.0.0". It looks like it may be due to poorly encoded rips. From what I have read, there is a way to disable the hardware decoder for only Xvid encodes. I have added this:
Code: Select all
  <video>
    <stagefright>
      <usemp4codec>0</usemp4codec>
    </stagefright>
  </video>
to my advancedsettings.xml as suggested for some FireTV users, but I don't believe that these releases have libstagefright installed?

I think that refers to Android builds of Kodi - as libstagefright is an Android API/library for video playback. Don't think it is relevant for OpenElec (which is Linux not Android)

Math1010 · Post by **Math1010** » Mon Dec 28, 2015 1:31 am

Hello,
I installed OpenELEC 6.95.4.0 on my ODROID-C1+ with the HiFi shield and I have a few questions.
Is it possible to have resolution 1366x768 with OpenELEC ?
I changed the asound.conf file like this to operate the hifi shield:

Code: Select all

pcm.! default {
   Type plug
   Slavic {
     pcm 'hw: 1,0 "
   }
}
ctl.! default {
   Type hw
   card 1
}

The HiFi Shield works but I can not choose the output device in the kodi settings, is there a solution ?
Thank you.

giacombum · Post by **giacombum** » Tue Dec 29, 2015 1:39 am

Maybe a stupid question: the two wifi-usb adapters selled by hardkernel are compatible with openelec? Is there a better compatible usb dongle for wifi connection?

Hominidae · Post by **Hominidae** » Tue Dec 29, 2015 1:44 am

..both wifi adapters work with this openelec distro, but only module 4 can be used in host/AP mode

giacombum · Post by **giacombum** » Tue Dec 29, 2015 1:56 am

Hominidae wrote:only module 4 can be used in host/AP mode

Can you explain what do you mean?

Is there a better (also not from hardkernel) compatible usb dongle?

Hominidae · Post by **Hominidae** » Wed Dec 30, 2015 3:47 pm

AP -> Access Point ... when you want the openelec box to run as your wifi Acess Point and your wifi clients to connect to it directly.
You do not need that if you want your openlec box to connect as a client to your wifi AP.
I use this mode, when taking my setup traveling and then connect my mobile phone, running kodi-remote app, to it.

Pienoet · Post by **Pienoet** » Thu Dec 31, 2015 12:07 am

wrxtsy i have a CEC usb adapter from pulse-eight and i wonder if i can the standard cec turn of so that libcec only uses the usb adapter.

Cause now i think it's interfering.
On my samsung tv i have in cec settings kodi and odroid c1.
odroid c1 is the standard cec enabled in the image and kodi is the usb cec adapter from pulse-eight.

When turn tv off for a while it automaticly switch to odroid c1 even when in cec settings in kodi change the hdmi port to 0x4000.

Is it possible in boot.ini to turn off cec or is cec totally disabledthen?

I want to use the usb cec adapter from pulse-eight the same way like the rpi2 does when turn off tv for a while and then turn on and cec is still enabled.

Thanks!

danny_ice · Post by **danny_ice** » Thu Dec 31, 2015 1:51 am

hi there, from what i understand if you disable cec it will just be the hdmi port cec that stops working, i think the usb pulse 8 adapter would carry on functioning like normal. or you could try a cec-less hdmi cable from the pulse8 to the odroid

Pienoet · Post by **Pienoet** » Thu Dec 31, 2015 4:19 am

danny_ice wrote:hi there, from what i understand if you disable cec it will just be the hdmi port cec that stops working, i think the usb pulse 8 adapter would carry on functioning like normal. or you could try a cec-less hdmi cable from the pulse8 to the odroid

Thanks i disable cec in the boot.ini and now after reboot it goes to hdmi 1.

I set the hdmi physical adress in kodi to 0x4000 so why after reboot it goes to hdmi por 1?

What do you mean by: or you could try a cec-less hdmi cable from the pulse8 to the odroid

danny_ice · Post by **danny_ice** » Thu Dec 31, 2015 11:05 am

If you have a cec-less HDMI cable then the odroids built in cec wouldn't be able to Interfere with the pulse eight cec

Pienoet · Post by **Pienoet** » Thu Dec 31, 2015 5:04 pm

danny_ice wrote:If you have a cec-less HDMI cable then the odroids built in cec wouldn't be able to Interfere with the pulse eight cec

Thanks i will look into that then.

varma · Post by **varma** » Thu Dec 31, 2015 5:54 pm

varma wrote:Is this product compatible with this Openelec distro?

http://it.aliexpress.com/item/Free-Ship ... eb201560_3

otherwise, does anybody know a board with analog AND optical output at a similar price?

Will be this one any better??

http://www.aliexpress.com/item/New-Orig ... 58520.html

Thank you and happy new year!

Semirben · Post by **Semirben** » Thu Dec 31, 2015 10:52 pm

Hi guys,

I have the issue that the command "Power off" from the shutdown/restart menu is rebooting the Odroid C1+ instead of shutting it down. Is there a way to fix this?

Thanks and regards,
Daniel

marco_silva85 · Post by **marco_silva85** » Fri Jan 01, 2016 12:18 am

Semirben wrote:Hi guys,

I have the issue that the command "Power off" from the shutdown/restart menu is rebooting the Odroid C1+ instead of shutting it down. Is there a way to fix this?

Thanks and regards,
Daniel

I have that issue too.
Also, is there a way to powering ON Odroid when turning on the TV with CEC?

Gobam · Post by **Gobam** » Fri Jan 01, 2016 1:00 am

Gobam wrote:Wrxtasy,

First of all, thanks for your excellent work on this!!

I just installed version 6.95.3.0 from the image, and upgraded to 6.95.4.0. I have a MyGica T230, but it's not recognized when inserted. The following is the output of lsusb and dmesg:
Code: Select all
OpenELEC:~ # lsusb
Bus 001 Device 004: ID 0572:c688 Conexant Systems (Rockwell), Inc. Geniatech T230 DVB-T2 TV Stick
Code: Select all
[ 1819.764544@3] usb 1-1.4: new high-speed USB device number 4 using dwc_otg
[ 1819.865360@3] usb 1-1.4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
There is no other output in dmesg related to this card. The same card is correctly detected in a RPi 2. Could you please confirm if there is other config required for this card to work? Thanks!!

Hi @wrxtasy,

Regarding this, I was able to compile OpenElec 6.0.0 from @zalaare sources, using the patch provided by @vanti in http://forum.odroid.com/viewtopic.php?f=114&t=17838. With this version MyGicaT230 works fine. However, that version has some issues that makes it unusable for my needs, and all these issues are corrected in your version v6.95.4.0, which is, by the way, an outstanding version (everything else works almost perfect).

Is it possible to get a copy of the source for version 6.95.4.0, so we can try to apply the patch? Thank you very much!!

Xili · Post by **Xili** » Fri Jan 01, 2016 1:16 am

Deaddy wrote:Fantastic, thank you so much, now it works!
Now I read everything in order to understand better how to use my Harmony that on a PC with Openlec worked without problems.

EDIT: ok found, with a Harmony Touch remote, configured as a MCE remote:
Code: Select all
cp /etc/lirc/lircd.conf.rpi /storage/.config/lircd.conf
reboot 
and everything magically works

Could you give me more details about what you did, and the handling has perform.
I have a Harmony Touch remote, but impossible to operate with the odroid c1 under openelec 6.0.3.

settings Harmony Touch remote
from where comes the file lircd.conf , could you send me

Thank you for your help

wrxtasy · Post by **wrxtasy** » Sat Jan 02, 2016 3:26 am

Hi All,
Back in C1+ land again after a playing around in the WeTek bouncy castle for a while.

DVB - usb users will be happy as I've nabbed this Experimental Kernel v3.16 from Crashoverride:
http://forum.odroid.com/viewtopic.php?f=112&t=17929

And mixed in a bit of Runnerways Special HEVC Commit Sauce and came up with this:
OE 6.9.5 / Kodi 16.0 Jarvis beta5
https://mega.nz/#!i8szTLjb!RaCE94hmjhqz ... 85IFhhOb7k

So far, I've found the C1's IR receiver is not working with this v3.16 Kernel. There is likely more broken as well, experimental after all.
HDMI CEC still works tho, although thats not ideal.

Another thing of interest is this OE HDMI CEC ON/OFF Addon from the WeTek Play but its also compatible with the S805 C1:
http://openelec.tv/forum/146-wetek-play ... ler-add-on.

Currently working on 3D MVC and ISO support for OE AMLogic platforms, slowly making progress.
Expect to see a OE 6.0.0 Kodi Isengard 3D test version soon.

W.

Semirben · Post by **Semirben** » Sat Jan 02, 2016 6:58 pm

Hi @wrxtasy,

do you know what causes the problem that the command "Power off" from the shutdown/restart menu is rebooting the Odroid C1+ instead of shutting it down?

Thanks and regards,
Daniel

wrxtasy · Post by **wrxtasy** » Sat Jan 02, 2016 7:08 pm

Gday,
No its all shutting down properly here with the latest v6.95.5 of OpenELEC that I've just tested.
Blue flashing light extinguishes to signal no activity.

As always update to the latest version if you are having issues.

OpenELEC v6.95.5 Kodi Jarvis beta5 has just been released, see Page #1 for details.

I'm finally confident too this version will work properly with MyGica T230/August T210v2 DVB-T/T2/C USB Sticks now I've checked the Kernel properly.

Semirben · Post by **Semirben** » Sat Jan 02, 2016 8:08 pm

Thanks, I will try it and report back

Edit: Shutdown is working now using 6.95.5.0, thank you very much

rooted · Post by **rooted** » Sun Jan 03, 2016 3:19 am

Happy New Year, good to see you back @wrxtasy.

Running the latest Beta 5 build with latest tvheadend (ATSC) and everything seems to be fine thus far other than the same laggy mpeg4 playback the C1/+ has always suffered from. I will still have to use my Pi2 to watch mpeg4 content unfortunately.

wrxtasy · Post by **wrxtasy** » Sun Jan 03, 2016 10:13 am

Hi Rooted,

mpeg4 and Kodi on OE is about as good as it is going to get for the time being.
If you pull up the OSD Codec window it should be Hardware amcodec decoding (am-mpeg4), the alternative is ffmpeg Software decoding which will be worse. No idea if this will be fixed.

Can I ask you (and everyone else) that tells me their usb Tuners are working with TvHeadend (plugged into the C1) to list what device they are actually using for the benefit of others ?

The Brand and the name of the usb Tuner please, and just a simple: (lsusb -v for more info)

Code: Select all

lsusb

Mine is - Sony Play TV dual dvb-t Tuner, dvb-usb-dib0700 Firmware (from dmesg command):

Code: Select all

Bus 001 Device 005: ID 1415:0003 Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc.

rooted · Post by **rooted** » Sun Jan 03, 2016 10:35 am

The codec used is am-mpeg4, it's just not functioning correctly. It's an issue that has been around a long time, no worries I certainly don't expect you to fix it.

I'm using this ATSC TV adapter:

KWorld UB435-Q

Code: Select all

Bus 001 Device 003: ID 1b80:a340 Afatech

wrxtasy · Post by **wrxtasy** » Sun Jan 03, 2016 12:54 pm

Thanks, I'm compiling a list for Page #1 and yours was important as its an ATSC usb tuner.

Gobam · Post by **Gobam** » Sun Jan 03, 2016 3:21 pm

Hi @wrxtasy,

I tested version 6.95.5 and it is working fine with my DVB-T2 stick, thank you very much! I am using the following:

Code: Select all

Bus 001 Device 004: ID 0572:c688 Conexant Systems (Rockwell), Inc. Geniatech T230 DVB-T2 TV Stick

However, I had at least 3 freezes during video reproduction, in some case watching live TV, in other case playing a recorded video. All these freezes were in the OS, as nothing is responding, including the SSH server. Only option is to disconnect the power adaptor. Not sure if I can obtain a log of these events.. Is it possible this is caused by the new kernel?

Thank you!

IanPH · Post by **IanPH** » Sun Jan 03, 2016 8:38 pm

@wrxtasy,

Welcome back. Your long absence got me kinda worried as your such a great supporter of our beloved little monster.
I have a request. I'm using a TVHeadend dedicated server (4 sat tuners, 1 dvb-t tuner and a hand full of IPTV channels).
The latest pvr.hts now is 2.2.10 (see https://github.com/kodi-pvr/pvr.hts/blo ... ngelog.txt ) which has some interesting fixes for timeshift and other.
The one I'm using now is 2.1.18 (which comes with 6.0.3). Could you please compile the latest version?

Or is it easy to explain how I can compile it myself? As I haven't got a clue yet, how to do that.

Thanks in advance.

noggin · Post by **noggin** » Sun Jan 03, 2016 8:53 pm

Sadly no support for the August T210v1 (aka Geniatech T220) USB DVB-T2 tuner in the 6.95.5.0 build.

wrxtasy · Post by **wrxtasy** » Sun Jan 03, 2016 9:30 pm

@ Noggin, thanks for testing. Maybe try the Experimental v 6.95.5 with the Kernel v3.16

@ Gobham, you can do some Kernel Logging to look for errors to try and get something before crashing happens with:

Code: Select all

dmesg | paste

Then throw the http Link up here on the Forums.

@IanPH, the wee beastie is still getting some loving. I will post up some 3D MVC test Isengard releases this week for those who want to experiment with 3D.

All the most recent pvr clients are already packaged with v6.95.5, you have likely not been looking in the correct place:
(I'm using pvr.hts v2.2.10 currently)
Addons > MyAddons > PVR Clients

Updated TvHeadend server compiles that support Sat IP Tuners are found in here:
(Use the WeTek nightlies)
http://build.mycvh.de/Tvh/

IanPH · Post by **IanPH** » Sun Jan 03, 2016 10:23 pm

wrxtasy wrote:@IanPH, the wee beastie is still getting some loving. I will post up some 3D MVC test Isengard releases this week for those who want to experiment with 3D.

All the most recent pvr clients are already packaged with v6.95.5, you have likely not been looking in the correct place:
(I'm using pvr.hts v2.2.10 currently)
Addons > MyAddons > PVR Clients

Thanks for your support! Highly appreciate it!

But 6.95.5, as I recall is based on Jarvis while I have to stick to Isengard since I have several OE machines based on different hardware which all share the same MySQL database.
Can I just take the 2.2.10 pvr.hts from 6.95.5 and install it in Isengard?

thoniodu10 · Post by **thoniodu10** » Sun Jan 03, 2016 11:00 pm

Hello everyone,

Firstly, thank you for that great work.

One question : am I the only one with HEVC playback issue ?

I mean, I have two movies HEVC encoded, and both are crashing during playback.

I'm with Odroid C1+, and tried with latest build, Alpha 4 or 15.2, same issue.

Thank you for your support !

wrxtasy · Post by **wrxtasy** » Sun Jan 03, 2016 11:12 pm

This version onwards fixes HEVC playback issues. (see Page #1)
OpenELEC 5.95.6.2 - Kodi Isengard 15.2 Final aka the VFQ edition.

If you are still having problems I suspect its the encoding of the files themselves.

wrxtasy · Post by **wrxtasy** » Sun Jan 03, 2016 11:47 pm

IanPH wrote: But 6.95.5, as I recall is based on Jarvis while I have to stick to Isengard since I have several OE machines based on different hardware which all share the same MySQL database.
Can I just take the 2.2.10 pvr.hts from 6.95.5 and install it in Isengard?

Try this one pvr.hts v2.2.10, no Idea if it will work with Isengard.
https://dl.dropboxusercontent.com/u/276 ... 2.2.10.zip

The TvHeadend server may even need upgrading to at least v4.0.7

IanPH · Post by **IanPH** » Mon Jan 04, 2016 12:12 am

wrxtasy wrote:Try this one pvr.hts v2.2.10, no Idea if it will work with Isengard.
https://dl.dropboxusercontent.com/u/276 ... 2.2.10.zip

The TvHeadend server may even need upgrading to at least v4.0.7

Thanks, I will give it a try. I'm running a dedicated Linux Debian server with TVHeadend 4.1-1286.

*EDIT*
Well that doesn't work. It complains that dependencies are not met

.
Apparently it requires xbmc.pvr version 4.1.0 while Isengard uses version 1.9.6.

marco_silva85 · Post by **marco_silva85** » Mon Jan 04, 2016 5:44 am

IanPH wrote:
IanPH wrote:One question, I have marked out setenv hdmi_cec "hdmitx=cecf" with # in boot.ini, yet everytime I switch off my TV (which automatically also switches off my amp) I see the power-menu when I switch my TV back on. I'm pretty sure it's not something it receives through the IR-receiver of my Windows MCE remote as I unplugged it to rule that out. What might cause this? As I was under the impression that CEC is completely disabled when that line is marked out?!
Anyone an idea about this?

It still happens, in every 6.0.x and every 6.95.x.
Powering off the TV sends the HDMI CEC shutdown, but that only brings the power menu in kodi - it's the hardkernel faulty implementation of their hacks around CEC. Odroid don't have a true CEC, it's a hacky implementation that in the end sends key-events to the system, and I bet the "power key" event is issued.

A way around it is maybe making a custom keymap.xml for a shutdown / power key... maybe wrxtasy would know..

danny_ice · Post by **danny_ice** » Mon Jan 04, 2016 6:37 am

hi all

is anyone else getting poor samba performance? I'm struggling to watch my higher bitrate files without them buffering

Cheers
Dan

thoniodu10 · Post by **thoniodu10** » Mon Jan 04, 2016 11:48 pm

wrxtasy wrote:This version onwards fixes HEVC playback issues. (see Page #1)
OpenELEC 5.95.6.2 - Kodi Isengard 15.2 Final aka the VFQ edition.

If you are still having problems I suspect its the encoding of the files themselves.

Thank you for your prompt answer wrxtasy.

In fact, after different testing, my conclusion is that movie such as 1080p/HEVC are too complex for odroid devices.
My panasonic TV is almost capable of reading this kind of movie. But odroid devices only accept low bitrates encoded files.

If someone has feedbacks on reading 1080p/HEVC movie, please let me know.

IanPH · Post by **IanPH** » Tue Jan 05, 2016 12:06 am

thoniodu10 wrote:Thank you for your prompt answer wrxtasy.

In fact, after different testing, my conclusion is that movie such as 1080p/HEVC are too complex for odroid devices.
My panasonic TV is almost capable of reading this kind of movie. But odroid devices only accept low bitrates encoded files.

If someone has feedbacks on reading 1080p/HEVC movie, please let me know.

Are you sure your movies are encoded with 8 bit because the S805 (in the ODroid C1) does not support 10 bit HEVC!

wrxtasy · Post by **wrxtasy** » Tue Jan 05, 2016 2:54 am

I suspect that is what the problem is because I've yet to find in all my numerous testing any 8-bit video 1080p HEVC that will not play on the C1 and that includes high bitrate stuff.

Sometimes the Audio codec or Audio settings can screw with playback too. Only way to be sure of whats in the video file is examining it with a PC/Mac program like Mediainfo.

DroidC1 · Post by **DroidC1** » Tue Jan 05, 2016 5:13 pm

Hi all, Anyone know how to force kodi to display HEVC movies in the video library? I don't see them in the menu "MOVIES". I need to go in the menu "VIDEOS" to launch them. I use 6.0.3 version. Thanks a lot!

Hominidae · Post by **Hominidae** » Tue Jan 05, 2016 8:25 pm

DroidC1 wrote:Hi all, Anyone know how to force kodi to display HEVC movies in the video library? I don't see them in the menu "MOVIES". I need to go in the menu "VIDEOS" to launch them. I use 6.0.3 version. Thanks a lot!

...first off, I think this is not releated to openelec, odroid or even HEVC but only related to kodi and how you scrape your content.

...second, I am not sure what you want...maybe you are confusing the semantics here? IMHO the video library is for videos and the movies library is for movies
For what I'd gather, you want your HEVC *movies* to show in the movies library (but they currently show up in the videos libary), right?

Possible solution:

- delete the entries from the library
- use the appropriate scraper form the movies library to create the entry there
...alternative: use an external scraper/helper, like MediaElch: http://www.kvibes.de/en/mediaelch/

wrxtasy · Post by **wrxtasy** » Tue Jan 05, 2016 10:36 pm

And in the words of Monty Python....now for something completely different !

OpenELEC 6.95.5 / Kodi Jarvis 16.0 beta5 with extras

Those being 3D ISO and MVC video playback, courtesy of source code from a number of people and places.
Koying and Popcornmix from Kodi and the Zidoo guys who modded the ffmpeg demuxer.
Lots of elboy grease was still required:

OE 6.96.6 Kodi Jarvis 16.0 beta5 .tar HERE

Test version, as I have no 3D TV, but Kernel and Kodi logs very encouraging.
3D ISO and MVC Test clips here:
http://kodi.wiki/view/Samples

Have Fun !