[OS] Debian Jessie

itsmaxdd
Posts: 52
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by itsmaxdd »

# HDMI Hotplug Force (HPD)
# 1 = Enables HOTPlug Detection
# 0 = Disables HOTPlug Detection and force the connected status
setenv hpd "0"

it was already there

Should i tinker with disableUHS?

Here's my power supply https://imgur.com/a/kYME9Qr

I can't even format an external usb hdd with separate psu that everything freezes..... is that normal? :$

User avatar
rooted
Posts: 10573
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 818 times
Been thanked: 724 times
Contact:

Re: [OS] Debian Jessie

Post by rooted »

I would try disabling UHS. Do you have a multimeter?

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

itsmaxdd wrote:I have c1+ though, btw i hope to see a Stretch release from you
Have to test that later.. the problem is the Kernel, it's actually too old for Stretch, normally you would require at least Kernel 3.16 but the C1 only has 3.10 so this might be an issue, although it might still work, just with lots of errors.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

User avatar
odroid
Site Admin
Posts: 42184
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 3615 times
Been thanked: 2004 times
Contact:

Re: [OS] Debian Jessie

Post by odroid »

@itsmaxdd,
Since you are using the official PSU, remove the J8 jumper from the C1+ board.
https://wiki.odroid.com/odroid-c1/hardw ... wer_enable

itsmaxdd
Posts: 52
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by itsmaxdd »

I'll give it a try with the jumper, hopefully i dont need to desolder :D What about the multimeter? What should i measure?

User avatar
odroid
Site Admin
Posts: 42184
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 3615 times
Been thanked: 2004 times
Contact:

Re: [OS] Debian Jessie

Post by odroid »

If you have a DMM, measure 5.0V power rails on the 40pin header. The voltage should be stable at 4.7~5.3V in the boot process.
https://wiki.odroid.com/odroid-c1/hardw ... connectors
Because you have the official PSU, I don't think you need to measure it.

itsmaxdd
Posts: 52
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by itsmaxdd »

I've removed the jumper.
4.76V was the lowest between 2 - 6 and 4 - 6
With disableUHS commented out the reboot problems seems solved though (i havent tested it much).
Anyway still can't format a 500GB ext4 HDD, kernel panic occurs halfway through :( i think if i use the stock image file i can format it (it is a little bit of time since a stopped playing with the odroid but i started remembering why i've always avoided to upgrade and dist-upgrade)

User avatar
odroid
Site Admin
Posts: 42184
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 3615 times
Been thanked: 2004 times
Contact:

Re: [OS] Debian Jessie

Post by odroid »

Try to add coherent_pool=2M in the kernel boot parameter string in boot.ini file.

itsmaxdd
Posts: 52
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by itsmaxdd »

I tried and during the boot i've noticed that it said something along this line "reset high speed usb 5 with dwc_otg" or something similar, i had then to remove the usb to finally boot into debian (the second boot worked fine though) yet even if it took more time everything crashed anyway. Below the top output before it crashed (there was find command from user nobody running at 71% and then khungtaskd came in right before the crash

Code: Select all

top - 22:20:55 up 8 min,  3 users,  load average: 4.16, 2.80, 1.36
Tasks: 161 total,   5 running, 155 sleeping,   0 stopped,   1 zombie
%Cpu(s):  1.0 us, 20.2 sy,  3.3 ni, 39.8 id, 35.7 wa,  0.0 hi,  0.0 si,  0.0 st
KiB Mem:    937992 total,   686704 used,   251288 free,   198724 buffers
KiB Swap:        0 total,        0 used,        0 free.   138216 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND
   43 root      20   0       0      0      0 R  45.9  0.0   0:01.47 khungtaskd
  209 root      20   0    7800   1512   1116 R  39.4  0.2   0:02.38 systemd-jo+
  418 root      20   0   31392   1768   1164 S  38.7  0.2   0:01.48 rsyslogd
 1070 nobody    30  10    3616    992    688 D  26.9  0.1   0:39.89 find
   86 root      20   0       0      0      0 S   4.4  0.0   0:06.73 mmcqd/0
   34 root      20   0       0      0      0 S   3.7  0.0   0:09.76 kworker/0:1
   76 root     -51   0       0      0      0 R   3.1  0.0   0:08.81 irq/110-sd+
   44 root      20   0       0      0      0 S   2.5  0.0   0:00.15 kswapd0
  414 deluge    20   0   59248  23976   5524 S   2.2  2.6   0:23.48 deluged
   31 root      20   0       0      0      0 S   0.6  0.0   0:00.84 kworker/1:1
   67 root      20   0       0      0      0 S   0.6  0.0   0:05.04 kthread_di
 1048 root      30  10    9412   5608    596 S   0.6  0.6   0:15.28 sort
 1093 root      20   0    4552   1192    816 R   0.6  0.1   0:01.07 top
    8 root      20   0       0      0      0 S   0.3  0.0   0:00.62 rcu_preempt
   32 root      20   0       0      0      0 S   0.3  0.0   0:00.39 kworker/2:1
   35 root      20   0       0      0      0 S   0.3  0.0   0:00.60 kthread_hd+
  192 root      20   0       0      0      0 S   0.3  0.0   0:00.47 kworker/3:2
  258 root      20   0       0      0      0 S   0.3  0.0   0:00.04 w1_bus_mas+
    1 root      20   0    5040   3072   1528 S   0.0  0.3   0:04.90 systemd
Also i've noticed with htop that the command mkfs.ext4 was stuck at 0.0% of cpu usage. During the weekend hopefully i can try vanilla debian and OGST

Code: Select all

  1  [|||||||||||||                                             17.5%]     Tasks: 81, 78 thr; 2 running
  2  [||||||||||||||||                                          24.5%]     Load average: 3.38 2.09 0.91
  3  [|||||||||||||||||||||                                     29.2%]     Uptime: 00:05:33
  4  [||||||||||||||||||||||||||                                38.6%]
  Mem[||||||||||||||||||||||||||||||||||||||                240/916MB]
  Swp[                                                          0/0MB]

  PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
 1021 nobody     30  10  3616   992   688 R 78.7  0.1  0:07.52 /usr/bin/find / -ignore_readdir_race ( -fstype NFS -o -fstype nfs -o -fstype nfs4 -o
  881 root       20   0  4788  1688  1052 R  6.9  0.2  0:14.53 htop
  411 deluge     20   0 59248 23800  5344 S  3.2  2.5  0:19.69 /usr/bin/python /usr/bin/deluged -d -l /var/log/deluge/daemon.log -L warning
  999 root       30  10  9412  2740   552 S  1.1  0.3  0:00.12 /usr/bin/sort -z -f
  857 root       20   0  4008  1316   956 D  0.0  0.1  0:01.46 mkfs.ext4 /dev/sda1
  597 deluge     20   0 40636 24740  3532 S  0.3  2.6  0:07.29 /usr/bin/python /usr/bin/deluge-web -l /var/log/deluge/web.log -L warning
  595 odroid     20   0 79636 10792  8120 S  0.0  1.2  0:00.08 mate-panel
  494 root       20   0 35552  3832  2440 S  0.0  0.4  0:01.07 /usr/lib/policykit-1/polkitd --no-debug
  427 messagebu  20   0  5048  1880  1168 S  0.0  0.2  0:00.89 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-acti
 1017 nobody     20   0  4532  1920  1184 S  0.0  0.2  0:00.26 /lib/systemd/systemd --user
  418 root       20   0 52728  6352  5036 S  0.0  0.7  0:00.65 /usr/sbin/NetworkManager --no-daemon
    1 root       20   0  5200  3220  1528 S  0.0  0.3  0:04.86 /sbin/init
  497 root       20   0 35552  3832  2440 S  0.0  0.4  0:00.30 /usr/lib/policykit-1/polkitd --no-debug
  206 root       20   0  7800  1464  1088 S  0.0  0.2  0:00.96 /lib/systemd/systemd-journald
  479 root       20   0 52728  6352  5036 S  0.0  0.7  0:00.13 /usr/sbin/NetworkManager --no-daemon
  425 root       20   0  3088  1252   992 S  0.0  0.1  0:00.12 /lib/systemd/systemd-logind
  605 odroid     20   0 27316  4164  3304 S  0.0  0.4  0:00.13 /usr/lib/arm-linux-gnueabihf/polkit-mate/polkit-mate-authentication-agent-1
  990 root       30  10  1432   464   388 S  0.0  0.0  0:00.03 /bin/sh /usr/bin/updatedb.findutils
  415 root       20   0 31392  1792  1164 S  0.0  0.2  0:00.19 /usr/sbin/rsyslogd -n
  433 root       20   0 31392  1792  1164 S  0.0  0.2  0:00.11 /usr/sbin/rsyslogd -n
F1Help  F2Setup F3SearchF4FilterF5Tree  F6SortByF7Nice -F8Nice +F9Kill  F10Quit

Code: Select all

  1  [||||                                                                    4.8%]     Tasks: 81, 78 thr; 3 running
  2  [|||                                                                     1.9%]     Load average: 4.00 2.44 1.08
  3  [|                                                                       0.5%]     Uptime: 00:06:19
  4  [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||96.2%]
  Mem[||||||||||||||||||||||||||||||||||||||||||||||||||||||||           326/916MB]
  Swp[                                                                       0/0MB]

  PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
  999 root       30  10  9416  5532   588 R 95.4  0.6  0:14.37 /usr/bin/sort -z -f
  881 root       20   0  4788  1820  1052 R  1.4  0.2  0:16.80 htop
  411 deluge     20   0 59248 23980  5520 S  0.9  2.6  0:20.67 /usr/bin/python /usr/bin/deluged -d -l /var/log/deluge/daemon.log -L warning
  597 deluge     20   0 40636 24740  3532 S  0.0  2.6  0:07.39 /usr/bin/python /usr/bin/deluge-web -l /var/log/deluge/web.log -L warning
 1021 nobody     30  10  3616   992   688 S  0.0  0.1  0:28.33 /usr/bin/find / -ignore_readdir_race ( -fstype NFS -o -fstype nfs -o -fstype nfs4 -o -fstype afs -o -fstype b
  857 root       20   0  4008  1316   956 D  0.0  0.1  0:01.50 mkfs.ext4 /dev/sda1
  831 deluge     20   0 59248 23980  5520 S  0.0  2.6  0:01.12 /usr/bin/python /usr/bin/deluged -d -l /var/log/deluge/daemon.log -L warning
  521 root       20   0  132M 14236  9076 S  0.0  1.5  0:01.72 /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
  580 odroid     20   0  236M 12816  8996 S  0.0  1.4  0:00.06 /usr/bin/mate-settings-daemon
  858 root       20   0 10760  3084  2412 S  0.0  0.3  0:00.90 sshd: root@pts/1
  486 ntp        20   0  4736  1716  1288 S  0.0  0.2  0:00.31 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:109
  595 odroid     20   0 79636 10792  8120 S  0.0  1.2  0:00.08 mate-panel
  494 root       20   0 35552  3832  2440 S  0.0  0.4  0:01.07 /usr/lib/policykit-1/polkitd --no-debug
  427 messagebu  20   0  5048  1880  1168 S  0.0  0.2  0:00.89 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
 1017 nobody     20   0  4532  1920  1184 S  0.0  0.2  0:00.26 /lib/systemd/systemd --user
  418 root       20   0 52728  6352  5036 S  0.0  0.7  0:00.65 /usr/sbin/NetworkManager --no-daemon
    1 root       20   0  5200  3220  1528 S  0.0  0.3  0:04.86 /sbin/init
  497 root       20   0 35552  3832  2440 S  0.0  0.4  0:00.30 /usr/lib/policykit-1/polkitd --no-debug
  206 root       20   0  7800  1464  1088 S  0.0  0.2  0:00.96 /lib/systemd/systemd-journald
  479 root       20   0 52728  6352  5036 S  0.0  0.7  0:00.13 /usr/sbin/NetworkManager --no-daemon
F1Help  F2Setup F3SearchF4FilterF5Tree  F6SortByF7Nice -F8Nice +F9Kill  F10Quit
Also after the crash

Code: Select all

root@odroid-jessie:~# htop

Message from syslogd@localhost at May 30 22:41:28 ...                         0.0%]     Tasks: 69, 78 thr; 2 running
 kernel:[  484.323626@1] Kernel panic - not syncing: hung_task: blocked tasks 2.6%]     Load average: 3.83 2.86 1.38
  3  [|                                                                       1.3%]     Uptime: 00:08:03
  4  [|||||||||||||||                                                        17.9%]
  Mem[|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||      373/916MB]
  Swp[                                                                       0/0MB]

  PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
  206 root       20   0  7800  1496  1120 R 61.6  0.2  0:01.83 /lib/systemd/systemd-journald
  415 root       20   0 31392  1808  1172 S 61.6  0.2  0:01.02 /usr/sbin/rsyslogd -n
  433 root       20   0 31392  1808  1172 S  3.0  0.2  0:00.16 /usr/sbin/rsyslogd -n
  881 root       20   0  4788  1820  1052 R  2.3  0.2  0:26.31 htop
  411 deluge     20   0 59248 23980  5520 R  0.8  2.6  0:23.98 /usr/bin/python /usr/bin/deluged -d -l /var/log/deluge/daemon.log -L warning
  597 deluge     20   0 40636 24888  3664 S  0.8  2.7  0:07.67 /usr/bin/python /usr/bin/deluge-web -l /var/log/deluge/web.log -L warning
  432 root       20   0 31392  1808  1172 R  0.8  0.2  0:00.02 /usr/sbin/rsyslogd -n
  569 odroid     20   0  236M 12816  8996 S  0.0  1.4  0:01.15 /usr/bin/mate-settings-daemon
  595 odroid     20   0 79636 10792  8120 S  0.0  1.2  0:00.11 mate-panel
  836 root       20   0 10620  3084  2412 S  0.0  0.3  0:00.81 sshd: root@pts/0
  857 root       20   0     0     0     0 D  0.0  0.0  0:01.77 mkfs.ext4 /dev/sda1
  831 deluge     20   0 59248 23980  5520 S  0.0  2.6  0:01.25 /usr/bin/python /usr/bin/deluged -d -l /var/log/deluge/daemon.log -L warning
  207 root       20   0 10916  1704   904 S  0.0  0.2  0:00.43 /lib/systemd/systemd-udevd
 1073 root       20   0 10916  1048   248 D  0.0  0.1  0:00.01 /lib/systemd/systemd-udevd
  486 ntp        20   0  4736  1716  1288 S  0.0  0.2  0:00.37 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:109
    1 root       20   0  5200  3220  1528 S  0.0  0.3  0:05.16 /sbin/init
  521 root       20   0  132M 14300  9140 R  0.0  1.5  0:01.83 /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
  594 odroid     20   0  104M 16644 13564 S  0.0  1.8  0:01.82 caja
  413 root       20   0  4448  1064   852 S  0.0  0.1  0:00.02 /usr/sbin/cron -f
  750 odroid     20   0 65420 12804  9688 S  0.0  1.4  0:00.84 /usr/lib/mate-panel/clock-applet
F1Help  F2Setup F3SearchF4FilterF5Tree  F6SortByF7Nice -F8Nice +F9Kill  F10Quit

itsmaxdd
Posts: 52
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by itsmaxdd »

OGST pretty much the same thing. Can't format a USB HDD and i'm also guessing that random kernel crashes will occur even if i dont disconnect any usb as well, i guess my odroid c1+ will stay in the bin unless kernel 4.x will support it.

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

all my images use the same Kernel, would have been strange if OGST works while Debian Jessie does not.
What's the size of the HDD?
I would try to avoid partitions larger than 2TB it's still a 32bit system and the memory is rather limited on the C1.
But yes Kernel is not very good on the C1 sadly.
C1 is a nice little toy and good at video decoding, but I wouldn't use it for anything serious.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

itsmaxdd
Posts: 52
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by itsmaxdd »

Only 500GB unfortunately, i'm also trying to setup a samba server with the following smb.conf with no luck

Code: Select all

[drive]
comment = Public Storage
path = /media/odroid/Volume
browseable = yes
writeable = yes
only guest = no
create mask = 0777
directory mask = 0777
public = yes
guest ok = yes
/media/odroid/Volume is the path used by Mate when it autmounts the HDD.
It says i dont have the authorization when trying to connect from a mobile/windows desktop

Code: Select all

root@odroid-jessie:~# stat -c %a /media/odroid/
755
root@odroid-jessie:~# stat -c %a /media/odroid/Volume/
700
Last edited by itsmaxdd on Sat Jun 02, 2018 9:26 pm, edited 1 time in total.

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

I'd suggest mounting the HDD to a set folder like /srv/HDD/ on /etc/fstab and then use that path for samba,
as samba might be started before the HDD is ready and then the folder doesn't exist yet.
Therefore, crearte /srv/HDD or something like that as a folder and use samba on that, then mount the HDD in that folder
HDD not ready yet -> samba sees an empty folder (but still sees the folder)
HDD ready -> folder is populated in samba

should be a better option than to wait for /media/odroid/Volume
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

itsmaxdd
Posts: 52
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by itsmaxdd »

meveric wrote:I'd suggest mounting the HDD to a set folder like /srv/HDD/ on /etc/fstab and then use that path for samba,
as samba might be started before the HDD is ready and then the folder doesn't exist yet.
Therefore, crearte /srv/HDD or something like that as a folder and use samba on that, then mount the HDD in that folder
HDD not ready yet -> samba sees an empty folder (but still sees the folder)
HDD ready -> folder is populated in samba

should be a better option than to wait for /media/odroid/Volume
In that case it should work if i restart the samba service, but it doesnt.
It really feels like i don't have the permission though, i'll give it a try

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

/media/odroid/* should belong to the user "odroid" and for that the samba user might not have access to it. another reason why mounting it elsewhere could solve this.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

itsmaxdd
Posts: 52
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by itsmaxdd »

meveric wrote:/media/odroid/* should belong to the user "odroid" and for that the samba user might not have access to it. another reason why mounting it elsewhere could solve this.
Yes, that worked.
What i dont understand is how i've been able to use odroic c1+ as a seedbox for over 2 years with your distro.
Now it can't even save 2GB before getting Input/output error: /media/Drive1 everywhere.
Is this normal also?

I used to use your distro and OMV2

I've noticed that an old 320Gb works decently while the 500Gb doesnt.
The 500Gb draws 0.85A but i have an external power supply (the same i'm using for the 320Gb) so i dont really understand why

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

The image is probably not the issue, in fact the image is the same for many different ODROIDs (X,X2,U2/U3,XU3/XU4,C1).
But the hardware and the Kernel has many limitations.
The broken USB drivers are the biggest issue with the C1, and I can't even imagine whats all affected from this.
The low RAM can also be an issue especially with many torrents, in the past people had issues with different torrent clients crashing which turned all out to be RAM issues.

The C1 is my least favorite ODROID, due to the many issues it has.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

mcoburn
Posts: 104
Joined: Tue Feb 26, 2013 9:56 am
languages_spoken: English
ODROIDs: ODROID-U2, ODROID-XU, ODROID-C1
Location: Australia
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by mcoburn »

Sorry to bump a old thread, but would someone please tell me the instructions for setting up the Mali drivers? I have installed the mali450 package as per the first post, but it seems that it is missing the GL libraries as when I go to run glxgears it says "Unable to get a RGB, double-buffered visual". On my R-Pi 3B, glxgears runs without acceleration (since that's using a hacked fbdev-turbo driver). Thanks.
M. Coburn
Coburn Tech Solutions
ODROIDs owned: ODROID-U2/ODROID-XU Rev 0.3 (20130717)/ODROID-C1/ODROID-XU4
Accessories: eMMC NAND modules, ODROID-VU, WiFi Modules, Serial Terminal to USB Adapter

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

ODROIDs do not support OpenGL, they only support OpenGL ES.
Therefore you can not run OpenGL programs such as glxgears.
es2_gears is a EGL/GLESv2 version of glxgears which should work though if the drivers are installed and setup correctly.
Also these drivers are X11 drivers, means you need an X11 environment (or desktop) to start them in (not directly from VT).
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

rolloly
Posts: 23
Joined: Sat Jan 17, 2015 12:57 am
languages_spoken: english,greek
ODROIDs: C1
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by rolloly »

Something that might be useful for some. I am using a C1 with a Motorola Lapdock. With Ubuntu I had no problems with the keyboard. With Debian Jessie the keyboard worked erratically - missed or repeating keystrokes. After some investigation it turned out that it was only happening with the ondemand governor. Anybody have any clues as to reason for this?

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

as i normally don't use ondemand governor I can't really answer that question.
But I believe the ondemand governor on the C1 was actually broken and only performance and conservative are working correctly on the C1.
If you set the governor to ondemand and check the current frequency it will always show maximum clock.. and it's not running stable, but with conservative it actually clocks up and down correctly.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

rolloly
Posts: 23
Joined: Sat Jan 17, 2015 12:57 am
languages_spoken: english,greek
ODROIDs: C1
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by rolloly »

I don't use ondemand either, but the problem was the system started with ondemand and I was ready to abandon Debian because it was unusable. I am glad I found out what was wrong since I prefer Debian to Ubuntu. Everything works nicely with conservative.

roman_hg
Posts: 5
Joined: Mon Apr 12, 2021 11:42 pm
languages_spoken: english, spanish
ODROIDs: 2x Odroid C0
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by roman_hg »

hi there! i'm struggling to go forward with Debian on my C0. is it still compatible?

I get it booting and accepting commands in the terminal. The thing is I cannot start my wifi dongle with "ifconfig wlan0 up" or any other method I've googled around.

Also, can't launch ifconfig with sudo as it doesn't come as default.

So, no internet=can't update (which is the first step to take), so running in circles...

My dongle is a pretty standard Realtek RTL8188EUs which does get recognised straight away in Ubuntu. Could it be a driver issue? How could I get these drivers included in the Debian image? Compiling the whole image myself sounds like an adventure, so any other possibility would be appreciated!

Thanks for any help!

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

the image probably hasn't installed WLAN drivers by default.
Back when I created the image I wasn't looking out for WLAN only users so it's not pre-installed.
It should work with LAN though.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

roman_hg
Posts: 5
Joined: Mon Apr 12, 2021 11:42 pm
languages_spoken: english, spanish
ODROIDs: 2x Odroid C0
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by roman_hg »

ok, I focused on the driver problem and managed to get my WiFi set up on the C0. Now waiting 30minutes to get XFCE installed so I'll leave my two cents in case it helps. I'm using another PC with linux and connected to the internet.
  • Mount your Debian image (SD card via USB in my case) and copy the .deb package into the root folder:
    /media/user/rootfs
  • Open a terminal and extract the deb package

    Code: Select all

    cd /media/user/rootfs
    sudo dpkg-deb --extract firmware*.deb .
    It should have installed the drivers in /lib/firmware by default,
    but the system drivers are in the subfolder /lib/firmware/3.10.104, so move them along:

    Code: Select all

    cd /lib/firmware/
    mv ./rtl* /lib/firmware/3.10.104
    mv ./RTL* /lib/firmware/3.10.104
  • Launch the Odroid C0 with the SD card and log in as root. Now we can set up a WLAN connection with WPA_Supplicant, which is included within the distro.
    These steps will help: https://unix.stackexchange.com/a/283757
    • First, check wlan0 is not visible using "ifconfig"
    • Check the driver is working by activating wlan0

      Code: Select all

      ifconfig wlan0 up
      dongle should blink some led
    • Define wpa_supplicant config file:

      Code: Select all

      wpa_passphrase YOUR_WIFI_SSID YOUR_WIFI_PASSWORD > /etc/wpa_supplicant/wpa_supplicant.conf
    • start wpa_supplicant

      Code: Select all

      wpa_supplicant -B -iwlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf -Dnl8011,wext
    • Assign a local IP to wlan0

      Code: Select all

      dhclient wlan0
    • Check wlan0 is now listed by "ifconfig" and with a local IP 192.168.1.X
  • Finally, check internet is working by, for example, updating packages

    Code: Select all

    apt-get update
    You should see package update progress without connection errors
Now, keep on with Debian config as stated along the whole thread.

roman_hg
Posts: 5
Joined: Mon Apr 12, 2021 11:42 pm
languages_spoken: english, spanish
ODROIDs: 2x Odroid C0
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by roman_hg »

all set up and running in the C0. this distro is awesome. really lightweight and fully customizable. after a week trial and testing, this is the one. great job :)

anatife
Posts: 24
Joined: Wed May 14, 2014 10:52 am
languages_spoken: english french spanish c c++ java perl python
ODROIDs: C4 (in a recycled food container) as desktop, Armbian Bullseye
U3 (in a recycled food container) as version-control server, Meveric Bullseye
C1 (in a genuine case) as Wiki server, Ubuntu 18.04 LTS
Has thanked: 15 times
Been thanked: 1 time
Contact:

Re: [OS] Debian Jessie

Post by anatife »

(2022-11-13) _ After trying many other images (DietPi Bullseye, Armbian Bullseye), I have meveric's Jessie image running my Odroid C1.

Is anyone else still using a C1 and if so, have you got something more recent (Bullseye) running stable?

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

I have a C1+ that I have not used in over 5+ years. I also have a C4 that is lost in my storage unit (long story). I just got the C1+ out again and am trying to set it up with this image. I am not able to get to some of the repositories for doing the updates. Is anyone watching this thread that can help me get this going again?

Thank you,
Galen Seaman

User avatar
mad_ady
Posts: 11935
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4 (HC1, HC2), C1+, C2, C4 (HC4), N1, N2, N2L, H2, H3+, Go, Go Advance, M1, M1S
Location: Bucharest, Romania
Has thanked: 662 times
Been thanked: 1256 times
Contact:

Re: [OS] Debian Jessie

Post by mad_ady »

What errors are you getting while doing the updates?

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

Debian Jessie is out of LTS support and the repos on this image will cause some issues as the lesencypt root certificate under Debian Jessie is expired.

You can try to ignore it and see how far you get:

Code: Select all

cat /etc/apt/apt.conf.d/99oph-mdrjr-net-cert
Acquire::https::oph.mdrjr.net::Verify-Peer "false";
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

mad_ady wrote:
Tue Jan 31, 2023 3:19 pm
What errors are you getting while doing the updates?
Thank you for responding. I am disconnecting and reconnect my screen, keyboard and ethernet, so I need to restart to get the exact message. However, it is about invalid certificates. I am going to try Meveric's suggestion below.

I am well aware that this device is not supported for a long time. If I were trying to do anything serious with it, I would just get a new odroid. Thank you for taking a moment to help.

Galen

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

meveric wrote:
Wed Feb 01, 2023 5:18 pm
Debian Jessie is out of LTS support and the repos on this image will cause some issues as the lesencypt root certificate under Debian Jessie is expired.

You can try to ignore it and see how far you get:

Code: Select all

cat /etc/apt/apt.conf.d/99oph-mdrjr-net-cert
Acquire::https::oph.mdrjr.net::Verify-Peer "false";
Thank you. I will print this out, connect and boot up the C1+ and see if this works. Thanks for the reply!

Galen

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

The first line gave the error -> No such file or command.
The second line -> No command found.

The original error said signatures were invalid: KEYEXPIRED 1668892417 and public key not available: NO_PUBKEY AA8E81B4331F7F50.

I noticed that each error was after a request to get files in directories that ended in "/InRelease".

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

cat is a command that prints the content of a file.
It was meant to show you what the file needs to look like and what the content is that you need to create.

But I guess we can do it in another way for you.
Run the following command as user root:

Code: Select all

echo 'Acquire::https::oph.mdrjr.net::Verify-Peer "false";' > /etc/apt/apt.conf.d/99oph-mdrjr-net-cert
this line will create the file with the content it's suppose to have.

After that you can try apt-get update again and see if you get further.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

I entered the code as root (very carefully), but the error remains. Any other ideas?

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

The error remains, but does it continue?
The error won't go away it's just meant to tell the system to ignore the error.

Try if:

Code: Select all

apt-get update && apt-get upgrade && apt-get dist-upgrade && apt-get autoremove && apt-get clean && apt-get update
Does more than just showing the error.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

Thanks. I only tried 'apt-get update', saw the error and stopped. I will give the rest of the commands and see what happens. It is after midnight here, so I will have to continue this in about 12 hours.

Galen

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

meveric wrote:
Thu Feb 02, 2023 5:26 pm
The error remains, but does it continue?
The error won't go away it's just meant to tell the system to ignore the error.

Try if:

Code: Select all

apt-get update && apt-get upgrade && apt-get dist-upgrade && apt-get autoremove && apt-get clean && apt-get update
Does more than just showing the error.
I followed apt-get update with apt-get upgrade and apt-get dist-upgrade. The commands downloaded 0 files and of course setup-odroid does not download a desktop.

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

let me check my other ODROIDs.. I have another one where I disabled the check, maybe I missed an option.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

meveric wrote:
Sat Feb 04, 2023 5:15 am
let me check my other ODROIDs.. I have another one where I disabled the check, maybe I missed an option.
Thank you. If it becomes too time-consuming to get this going, I understand. I appreciate the great work you do for the community.

Galen

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

Seems it's not just my repos that are expired which makes it harder to get the image to run, but this should help:

Code: Select all

echo '// Do not verify peer certificate
Acquire::https::Verify-Peer "false";
// Do not verify that certificate name matches server name
Acquire::https::Verify-Host "false";' > /etc/apt/apt.conf.d/99-no-ca-verify
But you should consider updating the image to at least Debian Stretch depending on what your goal is with the image.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

meveric wrote:
Sat Feb 04, 2023 6:46 pm
Seems it's not just my repos that are expired which makes it harder to get the image to run, but this should help:

Code: Select all

echo '// Do not verify peer certificate
Acquire::https::Verify-Peer "false";
// Do not verify that certificate name matches server name
Acquire::https::Verify-Host "false";' > /etc/apt/apt.conf.d/99-no-ca-verify
But you should consider updating the image to at least Debian Stretch depending on what your goal is with the image.
Thanks again! I will try this now. My only goal is to learn a little bit more about debian, odriods, arm, etc.

Galen

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

galens wrote:
Sat Feb 04, 2023 10:38 pm
Thanks again! I will try this now. My only goal is to learn a little bit more about debian, odriods, arm, etc.

Galen
The C1 is probably a bad example for this with very little support nowadays and with many quirks specific for this board which does not apply to other boards, arm, debian or odroids in general.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

I understand. That is why I bought a C4 a few years ago. I had a major, unexpected move about 1.5 years ago, packed everything up and haven't found the C4 since. I am not able to buy any new devices right now, so, I am playing around with the C1+. If there is a better OS to use because of it's age, or it is time to throw away, it is no big deal.

Here is the first line that errors (hopefully without typing errors):

Code: Select all

W: GPG error http://ftp.debian.org jessie-updates InRelease: The following signatures were invalid: KEYEXPIRED 1668891673

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

Yes I've seen that line.. the image is out of support and some of the keys are expired.. that's why the command above tell the system to ignore verification.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

Any further ideas?

User avatar
meveric
Posts: 12137
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4, GoA v1.1, H2+, HC4, GoS
Has thanked: 94 times
Been thanked: 681 times
Contact:

Re: [OS] Debian Jessie

Post by meveric »

The line you posted shows the gpg error, that is expected, but with the config I gave you it should ignore this and continue anyway.
If it does not, then your output doesn't help to see what is the real issue, as it already shows what we know, and that part will never go away, but is also not was should block you from the update, if you done the other command I send you correctly.

Maybe you can post the entire output, rahter than a single line? Try to connect to the ODROID via SSH from your normal PC, that should allow you to copy the entire console output.

I'll keep looking if I can find another way, but it should work with the configs I gave you.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

galens
Posts: 12
Joined: Sun Jan 29, 2023 2:19 pm
languages_spoken: english
ODROIDs: C1+, C4 (lost in storage)
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by galens »

I will get the full output and post it. Thanks.

User avatar
bertieb
Posts: 1
Joined: Fri Apr 07, 2023 3:35 am
languages_spoken: english
ODROIDs: C1+ XU4
Has thanked: 1 time
Been thanked: 2 times
Contact:

Re: [OS] Debian Jessie

Post by bertieb »

I registered here to say two things: thank you for making these images; and that this image still works (for me) on my comparatively-ancient C1+.

It even updated to stretch, despite my slightly haphazard approach: changed all 'jessie' to 'stretch' in /etc/apt/sources.list*; then simply apt update; apt dist-upgrade. It complained a little but updated successfully.

Code: Select all

root@odroid-jessie:~# cat /etc/os-release
PRETTY_NAME="Debian GNU/Linux 9 (stretch)"
I should probably update the hostname now lol.

I'm using the C1+ to keep an eye on seedlings via motion:

seedlings
seedlings
seedlnig-motion.jpg (146.75 KiB) Viewed 4419 times
These users thanked the author bertieb for the post (total 2):
meveric (Fri Apr 07, 2023 4:43 am) • odroid (Fri Apr 07, 2023 9:25 am)

jonB
Posts: 8
Joined: Sat Mar 23, 2019 5:53 am
languages_spoken: english, italian, brazilian portuguese
ODROIDs: U3
Has thanked: 1 time
Been thanked: 0
Contact:

Re: [OS] Debian Jessie

Post by jonB »

You should check out dietpi... There is a more up to date image using Debian Bullseye:

https://dietpi.com/#downloadinfo

Post Reply

Return to “Other OS”

Who is online

Users browsing this forum: No registered users and 1 guest