[OS] Debian Jessie

Moderators: mdrjr, odroid

Re: [OS] Debian Jessie

Unread postby itsmaxdd » Tue May 29, 2018 4:26 am

# HDMI Hotplug Force (HPD)
# 1 = Enables HOTPlug Detection
# 0 = Disables HOTPlug Detection and force the connected status
setenv hpd "0"

it was already there

Should i tinker with disableUHS?

Here's my power supply https://imgur.com/a/kYME9Qr

I can't even format an external usb hdd with separate psu that everything freezes..... is that normal? :$
itsmaxdd
 
Posts: 47
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english

Re: [OS] Debian Jessie

Unread postby rooted » Tue May 29, 2018 4:50 am

I would try disabling UHS. Do you have a multimeter?
User avatar
rooted
 
Posts: 5317
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: [OS] Debian Jessie

Unread postby meveric » Tue May 29, 2018 6:33 am

itsmaxdd wrote:I have c1+ though, btw i hope to see a Stretch release from you

Have to test that later.. the problem is the Kernel, it's actually too old for Stretch, normally you would require at least Kernel 3.16 but the C1 only has 3.10 so this might be an issue, although it might still work, just with lots of errors.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.
User avatar
meveric
 
Posts: 8988
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1

Re: [OS] Debian Jessie

Unread postby odroid » Tue May 29, 2018 7:13 am

@itsmaxdd,
Since you are using the official PSU, remove the J8 jumper from the C1+ board.
https://wiki.odroid.com/odroid-c1/hardw ... wer_enable
User avatar
odroid
Site Admin
 
Posts: 28521
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: [OS] Debian Jessie

Unread postby itsmaxdd » Tue May 29, 2018 3:07 pm

I'll give it a try with the jumper, hopefully i dont need to desolder :D What about the multimeter? What should i measure?
itsmaxdd
 
Posts: 47
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english

Re: [OS] Debian Jessie

Unread postby odroid » Tue May 29, 2018 3:13 pm

If you have a DMM, measure 5.0V power rails on the 40pin header. The voltage should be stable at 4.7~5.3V in the boot process.
https://wiki.odroid.com/odroid-c1/hardw ... connectors
Because you have the official PSU, I don't think you need to measure it.
User avatar
odroid
Site Admin
 
Posts: 28521
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: [OS] Debian Jessie

Unread postby itsmaxdd » Wed May 30, 2018 3:13 am

I've removed the jumper.
4.76V was the lowest between 2 - 6 and 4 - 6
With disableUHS commented out the reboot problems seems solved though (i havent tested it much).
Anyway still can't format a 500GB ext4 HDD, kernel panic occurs halfway through :( i think if i use the stock image file i can format it (it is a little bit of time since a stopped playing with the odroid but i started remembering why i've always avoided to upgrade and dist-upgrade)
itsmaxdd
 
Posts: 47
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english

Re: [OS] Debian Jessie

Unread postby odroid » Wed May 30, 2018 9:06 am

Try to add coherent_pool=2M in the kernel boot parameter string in boot.ini file.
User avatar
odroid
Site Admin
 
Posts: 28521
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: [OS] Debian Jessie

Unread postby itsmaxdd » Thu May 31, 2018 5:22 am

I tried and during the boot i've noticed that it said something along this line "reset high speed usb 5 with dwc_otg" or something similar, i had then to remove the usb to finally boot into debian (the second boot worked fine though) yet even if it took more time everything crashed anyway. Below the top output before it crashed (there was find command from user nobody running at 71% and then khungtaskd came in right before the crash

Code: Select all
top - 22:20:55 up 8 min,  3 users,  load average: 4.16, 2.80, 1.36
Tasks: 161 total,   5 running, 155 sleeping,   0 stopped,   1 zombie
%Cpu(s):  1.0 us, 20.2 sy,  3.3 ni, 39.8 id, 35.7 wa,  0.0 hi,  0.0 si,  0.0 st
KiB Mem:    937992 total,   686704 used,   251288 free,   198724 buffers
KiB Swap:        0 total,        0 used,        0 free.   138216 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND
   43 root      20   0       0      0      0 R  45.9  0.0   0:01.47 khungtaskd
  209 root      20   0    7800   1512   1116 R  39.4  0.2   0:02.38 systemd-jo+
  418 root      20   0   31392   1768   1164 S  38.7  0.2   0:01.48 rsyslogd
 1070 nobody    30  10    3616    992    688 D  26.9  0.1   0:39.89 find
   86 root      20   0       0      0      0 S   4.4  0.0   0:06.73 mmcqd/0
   34 root      20   0       0      0      0 S   3.7  0.0   0:09.76 kworker/0:1
   76 root     -51   0       0      0      0 R   3.1  0.0   0:08.81 irq/110-sd+
   44 root      20   0       0      0      0 S   2.5  0.0   0:00.15 kswapd0
  414 deluge    20   0   59248  23976   5524 S   2.2  2.6   0:23.48 deluged
   31 root      20   0       0      0      0 S   0.6  0.0   0:00.84 kworker/1:1
   67 root      20   0       0      0      0 S   0.6  0.0   0:05.04 kthread_di
 1048 root      30  10    9412   5608    596 S   0.6  0.6   0:15.28 sort
 1093 root      20   0    4552   1192    816 R   0.6  0.1   0:01.07 top
    8 root      20   0       0      0      0 S   0.3  0.0   0:00.62 rcu_preempt
   32 root      20   0       0      0      0 S   0.3  0.0   0:00.39 kworker/2:1
   35 root      20   0       0      0      0 S   0.3  0.0   0:00.60 kthread_hd+
  192 root      20   0       0      0      0 S   0.3  0.0   0:00.47 kworker/3:2
  258 root      20   0       0      0      0 S   0.3  0.0   0:00.04 w1_bus_mas+
    1 root      20   0    5040   3072   1528 S   0.0  0.3   0:04.90 systemd


Also i've noticed with htop that the command mkfs.ext4 was stuck at 0.0% of cpu usage. During the weekend hopefully i can try vanilla debian and OGST

Code: Select all
  1  [|||||||||||||                                             17.5%]     Tasks: 81, 78 thr; 2 running
  2  [||||||||||||||||                                          24.5%]     Load average: 3.38 2.09 0.91
  3  [|||||||||||||||||||||                                     29.2%]     Uptime: 00:05:33
  4  [||||||||||||||||||||||||||                                38.6%]
  Mem[||||||||||||||||||||||||||||||||||||||                240/916MB]
  Swp[                                                          0/0MB]

  PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
 1021 nobody     30  10  3616   992   688 R 78.7  0.1  0:07.52 /usr/bin/find / -ignore_readdir_race ( -fstype NFS -o -fstype nfs -o -fstype nfs4 -o
  881 root       20   0  4788  1688  1052 R  6.9  0.2  0:14.53 htop
  411 deluge     20   0 59248 23800  5344 S  3.2  2.5  0:19.69 /usr/bin/python /usr/bin/deluged -d -l /var/log/deluge/daemon.log -L warning
  999 root       30  10  9412  2740   552 S  1.1  0.3  0:00.12 /usr/bin/sort -z -f
  857 root       20   0  4008  1316   956 D  0.0  0.1  0:01.46 mkfs.ext4 /dev/sda1
  597 deluge     20   0 40636 24740  3532 S  0.3  2.6  0:07.29 /usr/bin/python /usr/bin/deluge-web -l /var/log/deluge/web.log -L warning
  595 odroid     20   0 79636 10792  8120 S  0.0  1.2  0:00.08 mate-panel
  494 root       20   0 35552  3832  2440 S  0.0  0.4  0:01.07 /usr/lib/policykit-1/polkitd --no-debug
  427 messagebu  20   0  5048  1880  1168 S  0.0  0.2  0:00.89 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-acti
 1017 nobody     20   0  4532  1920  1184 S  0.0  0.2  0:00.26 /lib/systemd/systemd --user
  418 root       20   0 52728  6352  5036 S  0.0  0.7  0:00.65 /usr/sbin/NetworkManager --no-daemon
    1 root       20   0  5200  3220  1528 S  0.0  0.3  0:04.86 /sbin/init
  497 root       20   0 35552  3832  2440 S  0.0  0.4  0:00.30 /usr/lib/policykit-1/polkitd --no-debug
  206 root       20   0  7800  1464  1088 S  0.0  0.2  0:00.96 /lib/systemd/systemd-journald
  479 root       20   0 52728  6352  5036 S  0.0  0.7  0:00.13 /usr/sbin/NetworkManager --no-daemon
  425 root       20   0  3088  1252   992 S  0.0  0.1  0:00.12 /lib/systemd/systemd-logind
  605 odroid     20   0 27316  4164  3304 S  0.0  0.4  0:00.13 /usr/lib/arm-linux-gnueabihf/polkit-mate/polkit-mate-authentication-agent-1
  990 root       30  10  1432   464   388 S  0.0  0.0  0:00.03 /bin/sh /usr/bin/updatedb.findutils
  415 root       20   0 31392  1792  1164 S  0.0  0.2  0:00.19 /usr/sbin/rsyslogd -n
  433 root       20   0 31392  1792  1164 S  0.0  0.2  0:00.11 /usr/sbin/rsyslogd -n
F1Help  F2Setup F3SearchF4FilterF5Tree  F6SortByF7Nice -F8Nice +F9Kill  F10Quit


Code: Select all
  1  [||||                                                                    4.8%]     Tasks: 81, 78 thr; 3 running
  2  [|||                                                                     1.9%]     Load average: 4.00 2.44 1.08
  3  [|                                                                       0.5%]     Uptime: 00:06:19
  4  [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||96.2%]
  Mem[||||||||||||||||||||||||||||||||||||||||||||||||||||||||           326/916MB]
  Swp[                                                                       0/0MB]

  PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
  999 root       30  10  9416  5532   588 R 95.4  0.6  0:14.37 /usr/bin/sort -z -f
  881 root       20   0  4788  1820  1052 R  1.4  0.2  0:16.80 htop
  411 deluge     20   0 59248 23980  5520 S  0.9  2.6  0:20.67 /usr/bin/python /usr/bin/deluged -d -l /var/log/deluge/daemon.log -L warning
  597 deluge     20   0 40636 24740  3532 S  0.0  2.6  0:07.39 /usr/bin/python /usr/bin/deluge-web -l /var/log/deluge/web.log -L warning
 1021 nobody     30  10  3616   992   688 S  0.0  0.1  0:28.33 /usr/bin/find / -ignore_readdir_race ( -fstype NFS -o -fstype nfs -o -fstype nfs4 -o -fstype afs -o -fstype b
  857 root       20   0  4008  1316   956 D  0.0  0.1  0:01.50 mkfs.ext4 /dev/sda1
  831 deluge     20   0 59248 23980  5520 S  0.0  2.6  0:01.12 /usr/bin/python /usr/bin/deluged -d -l /var/log/deluge/daemon.log -L warning
  521 root       20   0  132M 14236  9076 S  0.0  1.5  0:01.72 /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
  580 odroid     20   0  236M 12816  8996 S  0.0  1.4  0:00.06 /usr/bin/mate-settings-daemon
  858 root       20   0 10760  3084  2412 S  0.0  0.3  0:00.90 sshd: root@pts/1
  486 ntp        20   0  4736  1716  1288 S  0.0  0.2  0:00.31 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:109
  595 odroid     20   0 79636 10792  8120 S  0.0  1.2  0:00.08 mate-panel
  494 root       20   0 35552  3832  2440 S  0.0  0.4  0:01.07 /usr/lib/policykit-1/polkitd --no-debug
  427 messagebu  20   0  5048  1880  1168 S  0.0  0.2  0:00.89 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
 1017 nobody     20   0  4532  1920  1184 S  0.0  0.2  0:00.26 /lib/systemd/systemd --user
  418 root       20   0 52728  6352  5036 S  0.0  0.7  0:00.65 /usr/sbin/NetworkManager --no-daemon
    1 root       20   0  5200  3220  1528 S  0.0  0.3  0:04.86 /sbin/init
  497 root       20   0 35552  3832  2440 S  0.0  0.4  0:00.30 /usr/lib/policykit-1/polkitd --no-debug
  206 root       20   0  7800  1464  1088 S  0.0  0.2  0:00.96 /lib/systemd/systemd-journald
  479 root       20   0 52728  6352  5036 S  0.0  0.7  0:00.13 /usr/sbin/NetworkManager --no-daemon
F1Help  F2Setup F3SearchF4FilterF5Tree  F6SortByF7Nice -F8Nice +F9Kill  F10Quit


Also after the crash

Code: Select all
root@odroid-jessie:~# htop

Message from syslogd@localhost at May 30 22:41:28 ...                         0.0%]     Tasks: 69, 78 thr; 2 running
 kernel:[  484.323626@1] Kernel panic - not syncing: hung_task: blocked tasks 2.6%]     Load average: 3.83 2.86 1.38
  3  [|                                                                       1.3%]     Uptime: 00:08:03
  4  [|||||||||||||||                                                        17.9%]
  Mem[|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||      373/916MB]
  Swp[                                                                       0/0MB]

  PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
  206 root       20   0  7800  1496  1120 R 61.6  0.2  0:01.83 /lib/systemd/systemd-journald
  415 root       20   0 31392  1808  1172 S 61.6  0.2  0:01.02 /usr/sbin/rsyslogd -n
  433 root       20   0 31392  1808  1172 S  3.0  0.2  0:00.16 /usr/sbin/rsyslogd -n
  881 root       20   0  4788  1820  1052 R  2.3  0.2  0:26.31 htop
  411 deluge     20   0 59248 23980  5520 R  0.8  2.6  0:23.98 /usr/bin/python /usr/bin/deluged -d -l /var/log/deluge/daemon.log -L warning
  597 deluge     20   0 40636 24888  3664 S  0.8  2.7  0:07.67 /usr/bin/python /usr/bin/deluge-web -l /var/log/deluge/web.log -L warning
  432 root       20   0 31392  1808  1172 R  0.8  0.2  0:00.02 /usr/sbin/rsyslogd -n
  569 odroid     20   0  236M 12816  8996 S  0.0  1.4  0:01.15 /usr/bin/mate-settings-daemon
  595 odroid     20   0 79636 10792  8120 S  0.0  1.2  0:00.11 mate-panel
  836 root       20   0 10620  3084  2412 S  0.0  0.3  0:00.81 sshd: root@pts/0
  857 root       20   0     0     0     0 D  0.0  0.0  0:01.77 mkfs.ext4 /dev/sda1
  831 deluge     20   0 59248 23980  5520 S  0.0  2.6  0:01.25 /usr/bin/python /usr/bin/deluged -d -l /var/log/deluge/daemon.log -L warning
  207 root       20   0 10916  1704   904 S  0.0  0.2  0:00.43 /lib/systemd/systemd-udevd
 1073 root       20   0 10916  1048   248 D  0.0  0.1  0:00.01 /lib/systemd/systemd-udevd
  486 ntp        20   0  4736  1716  1288 S  0.0  0.2  0:00.37 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:109
    1 root       20   0  5200  3220  1528 S  0.0  0.3  0:05.16 /sbin/init
  521 root       20   0  132M 14300  9140 R  0.0  1.5  0:01.83 /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
  594 odroid     20   0  104M 16644 13564 S  0.0  1.8  0:01.82 caja
  413 root       20   0  4448  1064   852 S  0.0  0.1  0:00.02 /usr/sbin/cron -f
  750 odroid     20   0 65420 12804  9688 S  0.0  1.4  0:00.84 /usr/lib/mate-panel/clock-applet
F1Help  F2Setup F3SearchF4FilterF5Tree  F6SortByF7Nice -F8Nice +F9Kill  F10Quit
itsmaxdd
 
Posts: 47
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english

Re: [OS] Debian Jessie

Unread postby itsmaxdd » Sat Jun 02, 2018 1:36 am

OGST pretty much the same thing. Can't format a USB HDD and i'm also guessing that random kernel crashes will occur even if i dont disconnect any usb as well, i guess my odroid c1+ will stay in the bin unless kernel 4.x will support it.
itsmaxdd
 
Posts: 47
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english

Re: [OS] Debian Jessie

Unread postby meveric » Sat Jun 02, 2018 1:47 am

all my images use the same Kernel, would have been strange if OGST works while Debian Jessie does not.
What's the size of the HDD?
I would try to avoid partitions larger than 2TB it's still a 32bit system and the memory is rather limited on the C1.
But yes Kernel is not very good on the C1 sadly.
C1 is a nice little toy and good at video decoding, but I wouldn't use it for anything serious.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.
User avatar
meveric
 
Posts: 8988
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1

Re: [OS] Debian Jessie

Unread postby itsmaxdd » Sat Jun 02, 2018 3:54 pm

Only 500GB unfortunately, i'm also trying to setup a samba server with the following smb.conf with no luck

Code: Select all
[drive]
comment = Public Storage
path = /media/odroid/Volume
browseable = yes
writeable = yes
only guest = no
create mask = 0777
directory mask = 0777
public = yes
guest ok = yes


/media/odroid/Volume is the path used by Mate when it autmounts the HDD.
It says i dont have the authorization when trying to connect from a mobile/windows desktop

Code: Select all
root@odroid-jessie:~# stat -c %a /media/odroid/
755
root@odroid-jessie:~# stat -c %a /media/odroid/Volume/
700
Last edited by itsmaxdd on Sat Jun 02, 2018 9:26 pm, edited 1 time in total.
itsmaxdd
 
Posts: 47
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english

Re: [OS] Debian Jessie

Unread postby meveric » Sat Jun 02, 2018 9:25 pm

I'd suggest mounting the HDD to a set folder like /srv/HDD/ on /etc/fstab and then use that path for samba,
as samba might be started before the HDD is ready and then the folder doesn't exist yet.
Therefore, crearte /srv/HDD or something like that as a folder and use samba on that, then mount the HDD in that folder
HDD not ready yet -> samba sees an empty folder (but still sees the folder)
HDD ready -> folder is populated in samba

should be a better option than to wait for /media/odroid/Volume
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.
User avatar
meveric
 
Posts: 8988
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1

Re: [OS] Debian Jessie

Unread postby itsmaxdd » Sat Jun 02, 2018 9:27 pm

meveric wrote:I'd suggest mounting the HDD to a set folder like /srv/HDD/ on /etc/fstab and then use that path for samba,
as samba might be started before the HDD is ready and then the folder doesn't exist yet.
Therefore, crearte /srv/HDD or something like that as a folder and use samba on that, then mount the HDD in that folder
HDD not ready yet -> samba sees an empty folder (but still sees the folder)
HDD ready -> folder is populated in samba

should be a better option than to wait for /media/odroid/Volume


In that case it should work if i restart the samba service, but it doesnt.
It really feels like i don't have the permission though, i'll give it a try
itsmaxdd
 
Posts: 47
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english

Re: [OS] Debian Jessie

Unread postby meveric » Sat Jun 02, 2018 9:42 pm

/media/odroid/* should belong to the user "odroid" and for that the samba user might not have access to it. another reason why mounting it elsewhere could solve this.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.
User avatar
meveric
 
Posts: 8988
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1

Re: [OS] Debian Jessie

Unread postby itsmaxdd » Sun Jun 03, 2018 1:36 am

meveric wrote:/media/odroid/* should belong to the user "odroid" and for that the samba user might not have access to it. another reason why mounting it elsewhere could solve this.


Yes, that worked.
What i dont understand is how i've been able to use odroic c1+ as a seedbox for over 2 years with your distro.
Now it can't even save 2GB before getting Input/output error: /media/Drive1 everywhere.
Is this normal also?

I used to use your distro and OMV2

I've noticed that an old 320Gb works decently while the 500Gb doesnt.
The 500Gb draws 0.85A but i have an external power supply (the same i'm using for the 320Gb) so i dont really understand why
itsmaxdd
 
Posts: 47
Joined: Thu Dec 24, 2015 6:41 pm
languages_spoken: english

Re: [OS] Debian Jessie

Unread postby meveric » Sun Jun 03, 2018 8:47 pm

The image is probably not the issue, in fact the image is the same for many different ODROIDs (X,X2,U2/U3,XU3/XU4,C1).
But the hardware and the Kernel has many limitations.
The broken USB drivers are the biggest issue with the C1, and I can't even imagine whats all affected from this.
The low RAM can also be an issue especially with many torrents, in the past people had issues with different torrent clients crashing which turned all out to be RAM issues.

The C1 is my least favorite ODROID, due to the many issues it has.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.
User avatar
meveric
 
Posts: 8988
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1

Re: [OS] Debian Jessie

Unread postby mcoburn » Sun Jul 01, 2018 4:03 pm

Sorry to bump a old thread, but would someone please tell me the instructions for setting up the Mali drivers? I have installed the mali450 package as per the first post, but it seems that it is missing the GL libraries as when I go to run glxgears it says "Unable to get a RGB, double-buffered visual". On my R-Pi 3B, glxgears runs without acceleration (since that's using a hacked fbdev-turbo driver). Thanks.
M. Coburn
Coburn Tech Solutions
ODROIDs owned: ODROID-U2/ODROID-XU Rev 0.3 (20130717)/ODROID-C1/ODROID-XU4
Accessories: eMMC NAND modules, ODROID-VU, WiFi Modules, Serial Terminal to USB Adapter
mcoburn
 
Posts: 104
Joined: Tue Feb 26, 2013 9:56 am
Location: Australia
languages_spoken: English
ODROIDs: ODROID-U2, ODROID-XU, ODROID-C1

Re: [OS] Debian Jessie

Unread postby meveric » Sun Jul 01, 2018 5:39 pm

ODROIDs do not support OpenGL, they only support OpenGL ES.
Therefore you can not run OpenGL programs such as glxgears.
es2_gears is a EGL/GLESv2 version of glxgears which should work though if the drivers are installed and setup correctly.
Also these drivers are X11 drivers, means you need an X11 environment (or desktop) to start them in (not directly from VT).
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.
User avatar
meveric
 
Posts: 8988
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1

Re: [OS] Debian Jessie

Unread postby rolloly » Tue Jul 24, 2018 1:17 am

Something that might be useful for some. I am using a C1 with a Motorola Lapdock. With Ubuntu I had no problems with the keyboard. With Debian Jessie the keyboard worked erratically - missed or repeating keystrokes. After some investigation it turned out that it was only happening with the ondemand governor. Anybody have any clues as to reason for this?
rolloly
 
Posts: 23
Joined: Sat Jan 17, 2015 12:57 am
languages_spoken: english,greek
ODROIDs: C1

Re: [OS] Debian Jessie

Unread postby meveric » Tue Jul 24, 2018 1:36 am

as i normally don't use ondemand governor I can't really answer that question.
But I believe the ondemand governor on the C1 was actually broken and only performance and conservative are working correctly on the C1.
If you set the governor to ondemand and check the current frequency it will always show maximum clock.. and it's not running stable, but with conservative it actually clocks up and down correctly.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.
User avatar
meveric
 
Posts: 8988
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1

Re: [OS] Debian Jessie

Unread postby rolloly » Thu Jul 26, 2018 11:58 pm

I don't use ondemand either, but the problem was the system started with ondemand and I was ready to abandon Debian because it was unusable. I am glad I found out what was wrong since I prefer Debian to Ubuntu. Everything works nicely with conservative.
rolloly
 
Posts: 23
Joined: Sat Jan 17, 2015 12:57 am
languages_spoken: english,greek
ODROIDs: C1

Previous

Return to Other OS

Who is online

Users browsing this forum: No registered users and 1 guest