The smart watch demo hardware

[Jeff_]

Hi everyone

I've seen the Smart watch demo video (http://youtu.be/JyL1to-9x_4) and I was wondering which are the hardware parts for :
- the screen (I don't see any docking board)
- the Bluetooth module (there are many)

If anybody have some refs and/or schematics, that could be awesome.

[mdrjr]

The smartwatch demo uses the SPI screen from the docking board connect to the ODROID-W without the docking board.
Bluetooth module there is just a ordinary bluetooth stripped down from its connectors and case and soldered directly to the USB port on ODROID-W

[Jeff_]

that's what I was wondering but I wanted to be sure of that

if I understant it right, the screen connector is soldered on the borad, right ?

other question : any chanche that we could see a touch version of this screen ? or do you know if another compatible touch screen exists ?

Thx !

[odroid]

More detail information about the smart watch demo will be mentioned in the ODROID Magazine August issue.
I think it will be published within 10 days.

We also need to check the availability of touch screen for 2.2~2.4 inch display first.
Another important option should be resistive vs capacitive type.
Let's try to find a nice solution with reasonable price range.

[Jeff_]

Its nice to read that

[shervrobotics]

It looks like a small 320x240 touch-screen doesn't have to be too expensive
Here are 2 examples that might help:
* Cichin LCD <$2 on Alibaba
* WVShare LCD ~$10

[lsc1117]

hi jeff

Below schematic images were used to build the watch demo.

Thank you.

[odroid]

Android application source code for your phone is
https://github.com/hardkernel/ODROID-GE ... odroidgear

Qt application source code for ODROID-W is
https://github.com/hardkernel/ODROID-GE ... odroidgear

[Jeff_]

many thanks
One more question (pardon me if you already answered to this one) do you plan to sell the lcd screen alone (without the docking board) ?

[odroid]

Not at this moment.

How about this product?
http://www.aliexpress.com/item/2-2-2-2i ... 44806.html
It seems to be much easier soldering.

[Jeff_]

I'll maybe have a try

[funfrancis]

Where do i connect the buttons on the smart watch and why

[odroid]

Schematics of button connection was already in the above pictures(written by lsc1117)

Refer our magazine August issue too.
http://forum.odroid.com/viewtopic.php?f=74&t=6078

[funfrancis]

Any thoughts of attaching a mini camera
like http://stellatech.com/samsung-gt-i9195- ... 15097.html

[odroid]

I think only the official RPi camera works because of the hard-coded video core firmware.

[funfrancis]

A casing for the smart watch would make it more productive

[thomen]

Hi just wondering with this little display could you use it with an XU3? and how the connection would work?

I'm looking for a capacitive display that would just work with the odroid at this kind of small form factor? I'm having a hard time tracking down interface boards to get it working..

[funfrancis]

kindly provide the OS image for the smart watch

[odroid]

kindly provide the OS image for the smart watch

You can find the source code and how to build/install them into ODROID-W via Magazine August issue.
http://forum.odroid.com/viewtopic.php?f=74&t=5085